| /* |
| * Copyright (C) 2008 Lemote Technology |
| * Copyright (C) 2004 ICT CAS |
| * Author: Li xiaoyu, lixy@ict.ac.cn |
| * |
| * Copyright (C) 2007 Lemote, Inc. |
| * Author: Fuxin Zhang, zhangfx@lemote.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| |
| #include <loongson.h> |
| #include <cs5536/cs5536.h> |
| #include <cs5536/cs5536_pci.h> |
| |
| /* PCI interrupt pins |
| * |
| * These should not be changed, or you should consider loongson2f interrupt |
| * register and your pci card dispatch |
| */ |
| |
| #define PCIA 4 |
| #define PCIB 5 |
| #define PCIC 6 |
| #define PCID 7 |
| |
| /* all the pci device has the PCIA pin, check the datasheet. */ |
| static char irq_tab[][5] = { |
| /* INTA INTB INTC INTD */ |
| {0, 0, 0, 0, 0}, /* 11: Unused */ |
| {0, 0, 0, 0, 0}, /* 12: Unused */ |
| {0, 0, 0, 0, 0}, /* 13: Unused */ |
| {0, 0, 0, 0, 0}, /* 14: Unused */ |
| {0, 0, 0, 0, 0}, /* 15: Unused */ |
| {0, 0, 0, 0, 0}, /* 16: Unused */ |
| {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */ |
| {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */ |
| {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */ |
| {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */ |
| {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */ |
| {0, 0, 0, 0, 0}, /* 22: Unused */ |
| {0, 0, 0, 0, 0}, /* 23: Unused */ |
| {0, 0, 0, 0, 0}, /* 24: Unused */ |
| {0, 0, 0, 0, 0}, /* 25: Unused */ |
| {0, 0, 0, 0, 0}, /* 26: Unused */ |
| {0, 0, 0, 0, 0}, /* 27: Unused */ |
| }; |
| |
| int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int virq; |
| |
| if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536) |
| && (PCI_SLOT(dev->devfn) < 32)) { |
| virq = irq_tab[slot][pin]; |
| printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, |
| virq + LOONGSON_IRQ_BASE); |
| if (virq != 0) |
| return LOONGSON_IRQ_BASE + virq; |
| else |
| return 0; |
| } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */ |
| switch (PCI_FUNC(dev->devfn)) { |
| case 2: |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, |
| CS5536_IDE_INTR); |
| return CS5536_IDE_INTR; /* for IDE */ |
| case 3: |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, |
| CS5536_ACC_INTR); |
| return CS5536_ACC_INTR; /* for AUDIO */ |
| case 4: /* for OHCI */ |
| case 5: /* for EHCI */ |
| case 6: /* for UDC */ |
| case 7: /* for OTG */ |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, |
| CS5536_USB_INTR); |
| return CS5536_USB_INTR; |
| } |
| return dev->irq; |
| } else { |
| printk(KERN_INFO " strange pci slot number.\n"); |
| return 0; |
| } |
| } |
| |
| /* Do platform specific device initialization at pci_enable_device() time */ |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |
| |
| /* CS5536 SPEC. fixup */ |
| static void loongson_cs5536_isa_fixup(struct pci_dev *pdev) |
| { |
| /* the uart1 and uart2 interrupt in PIC is enabled as default */ |
| pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); |
| pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); |
| } |
| |
| static void loongson_cs5536_ide_fixup(struct pci_dev *pdev) |
| { |
| /* setting the mutex pin as IDE function */ |
| pci_write_config_dword(pdev, PCI_IDE_CFG_REG, |
| CS5536_IDE_FLASH_SIGNATURE); |
| } |
| |
| static void loongson_cs5536_acc_fixup(struct pci_dev *pdev) |
| { |
| /* enable the AUDIO interrupt in PIC */ |
| pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); |
| |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); |
| } |
| |
| static void loongson_cs5536_ohci_fixup(struct pci_dev *pdev) |
| { |
| /* enable the OHCI interrupt in PIC */ |
| /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ |
| pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); |
| } |
| |
| static void loongson_cs5536_ehci_fixup(struct pci_dev *pdev) |
| { |
| u32 hi, lo; |
| |
| /* Serial short detect enable */ |
| _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); |
| _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 3), lo); |
| |
| /* setting the USB2.0 micro frame length */ |
| pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); |
| } |
| |
| static void loongson_nec_fixup(struct pci_dev *pdev) |
| { |
| unsigned int val; |
| |
| pci_read_config_dword(pdev, 0xe0, &val); |
| /* Only 2 port be used */ |
| pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2); |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, |
| loongson_cs5536_isa_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC, |
| loongson_cs5536_ohci_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC, |
| loongson_cs5536_ehci_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO, |
| loongson_cs5536_acc_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, |
| loongson_cs5536_ide_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, |
| loongson_nec_fixup); |