| /* |
| * TC Applied Technologies Digital Interface Communications Engine driver |
| * |
| * Copyright (c) Clemens Ladisch <clemens@ladisch.de> |
| * Licensed under the terms of the GNU General Public License, version 2. |
| */ |
| |
| #include "dice.h" |
| |
| MODULE_DESCRIPTION("DICE driver"); |
| MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); |
| MODULE_LICENSE("GPL v2"); |
| |
| #define OUI_WEISS 0x001c6a |
| #define OUI_LOUD 0x000ff2 |
| #define OUI_FOCUSRITE 0x00130e |
| #define OUI_TCELECTRONIC 0x000166 |
| #define OUI_ALESIS 0x000595 |
| #define OUI_MAUDIO 0x000d6c |
| #define OUI_MYTEK 0x001ee8 |
| #define OUI_SSL 0x0050c2 // Actually ID reserved by IEEE. |
| |
| #define DICE_CATEGORY_ID 0x04 |
| #define WEISS_CATEGORY_ID 0x00 |
| #define LOUD_CATEGORY_ID 0x10 |
| |
| #define MODEL_ALESIS_IO_BOTH 0x000001 |
| |
| static int check_dice_category(struct fw_unit *unit) |
| { |
| struct fw_device *device = fw_parent_device(unit); |
| struct fw_csr_iterator it; |
| int key, val, vendor = -1, model = -1; |
| unsigned int category; |
| |
| /* |
| * Check that GUID and unit directory are constructed according to DICE |
| * rules, i.e., that the specifier ID is the GUID's OUI, and that the |
| * GUID chip ID consists of the 8-bit category ID, the 10-bit product |
| * ID, and a 22-bit serial number. |
| */ |
| fw_csr_iterator_init(&it, unit->directory); |
| while (fw_csr_iterator_next(&it, &key, &val)) { |
| switch (key) { |
| case CSR_SPECIFIER_ID: |
| vendor = val; |
| break; |
| case CSR_MODEL: |
| model = val; |
| break; |
| } |
| } |
| |
| if (vendor == OUI_WEISS) |
| category = WEISS_CATEGORY_ID; |
| else if (vendor == OUI_LOUD) |
| category = LOUD_CATEGORY_ID; |
| else |
| category = DICE_CATEGORY_ID; |
| if (device->config_rom[3] != ((vendor << 8) | category) || |
| device->config_rom[4] >> 22 != model) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int check_clock_caps(struct snd_dice *dice) |
| { |
| __be32 value; |
| int err; |
| |
| /* some very old firmwares don't tell about their clock support */ |
| if (dice->clock_caps > 0) { |
| err = snd_dice_transaction_read_global(dice, |
| GLOBAL_CLOCK_CAPABILITIES, |
| &value, 4); |
| if (err < 0) |
| return err; |
| dice->clock_caps = be32_to_cpu(value); |
| } else { |
| /* this should be supported by any device */ |
| dice->clock_caps = CLOCK_CAP_RATE_44100 | |
| CLOCK_CAP_RATE_48000 | |
| CLOCK_CAP_SOURCE_ARX1 | |
| CLOCK_CAP_SOURCE_INTERNAL; |
| } |
| |
| return 0; |
| } |
| |
| static void dice_card_strings(struct snd_dice *dice) |
| { |
| struct snd_card *card = dice->card; |
| struct fw_device *dev = fw_parent_device(dice->unit); |
| char vendor[32], model[32]; |
| unsigned int i; |
| int err; |
| |
| strcpy(card->driver, "DICE"); |
| |
| strcpy(card->shortname, "DICE"); |
| BUILD_BUG_ON(NICK_NAME_SIZE < sizeof(card->shortname)); |
| err = snd_dice_transaction_read_global(dice, GLOBAL_NICK_NAME, |
| card->shortname, |
| sizeof(card->shortname)); |
| if (err >= 0) { |
| /* DICE strings are returned in "always-wrong" endianness */ |
| BUILD_BUG_ON(sizeof(card->shortname) % 4 != 0); |
| for (i = 0; i < sizeof(card->shortname); i += 4) |
| swab32s((u32 *)&card->shortname[i]); |
| card->shortname[sizeof(card->shortname) - 1] = '\0'; |
| } |
| |
| strcpy(vendor, "?"); |
| fw_csr_string(dev->config_rom + 5, CSR_VENDOR, vendor, sizeof(vendor)); |
| strcpy(model, "?"); |
| fw_csr_string(dice->unit->directory, CSR_MODEL, model, sizeof(model)); |
| snprintf(card->longname, sizeof(card->longname), |
| "%s %s (serial %u) at %s, S%d", |
| vendor, model, dev->config_rom[4] & 0x3fffff, |
| dev_name(&dice->unit->device), 100 << dev->max_speed); |
| |
| strcpy(card->mixername, "DICE"); |
| } |
| |
| static void dice_free(struct snd_dice *dice) |
| { |
| snd_dice_stream_destroy_duplex(dice); |
| snd_dice_transaction_destroy(dice); |
| fw_unit_put(dice->unit); |
| |
| mutex_destroy(&dice->mutex); |
| kfree(dice); |
| } |
| |
| /* |
| * This module releases the FireWire unit data after all ALSA character devices |
| * are released by applications. This is for releasing stream data or finishing |
| * transactions safely. Thus at returning from .remove(), this module still keep |
| * references for the unit. |
| */ |
| static void dice_card_free(struct snd_card *card) |
| { |
| dice_free(card->private_data); |
| } |
| |
| static void do_registration(struct work_struct *work) |
| { |
| struct snd_dice *dice = container_of(work, struct snd_dice, dwork.work); |
| int err; |
| |
| if (dice->registered) |
| return; |
| |
| err = snd_card_new(&dice->unit->device, -1, NULL, THIS_MODULE, 0, |
| &dice->card); |
| if (err < 0) |
| return; |
| |
| err = snd_dice_transaction_init(dice); |
| if (err < 0) |
| goto error; |
| |
| err = check_clock_caps(dice); |
| if (err < 0) |
| goto error; |
| |
| dice_card_strings(dice); |
| |
| err = dice->detect_formats(dice); |
| if (err < 0) |
| goto error; |
| |
| err = snd_dice_stream_init_duplex(dice); |
| if (err < 0) |
| goto error; |
| |
| snd_dice_create_proc(dice); |
| |
| err = snd_dice_create_pcm(dice); |
| if (err < 0) |
| goto error; |
| |
| err = snd_dice_create_midi(dice); |
| if (err < 0) |
| goto error; |
| |
| err = snd_dice_create_hwdep(dice); |
| if (err < 0) |
| goto error; |
| |
| err = snd_card_register(dice->card); |
| if (err < 0) |
| goto error; |
| |
| /* |
| * After registered, dice instance can be released corresponding to |
| * releasing the sound card instance. |
| */ |
| dice->card->private_free = dice_card_free; |
| dice->card->private_data = dice; |
| dice->registered = true; |
| |
| return; |
| error: |
| snd_dice_stream_destroy_duplex(dice); |
| snd_dice_transaction_destroy(dice); |
| snd_dice_stream_destroy_duplex(dice); |
| snd_card_free(dice->card); |
| dev_info(&dice->unit->device, |
| "Sound card registration failed: %d\n", err); |
| } |
| |
| static int dice_probe(struct fw_unit *unit, |
| const struct ieee1394_device_id *entry) |
| { |
| struct snd_dice *dice; |
| int err; |
| |
| if (!entry->driver_data && entry->vendor_id != OUI_SSL) { |
| err = check_dice_category(unit); |
| if (err < 0) |
| return -ENODEV; |
| } |
| |
| /* Allocate this independent of sound card instance. */ |
| dice = kzalloc(sizeof(struct snd_dice), GFP_KERNEL); |
| if (dice == NULL) |
| return -ENOMEM; |
| |
| dice->unit = fw_unit_get(unit); |
| dev_set_drvdata(&unit->device, dice); |
| |
| if (!entry->driver_data) { |
| dice->detect_formats = snd_dice_stream_detect_current_formats; |
| } else { |
| dice->detect_formats = |
| (snd_dice_detect_formats_t)entry->driver_data; |
| } |
| |
| spin_lock_init(&dice->lock); |
| mutex_init(&dice->mutex); |
| init_completion(&dice->clock_accepted); |
| init_waitqueue_head(&dice->hwdep_wait); |
| |
| /* Allocate and register this sound card later. */ |
| INIT_DEFERRABLE_WORK(&dice->dwork, do_registration); |
| snd_fw_schedule_registration(unit, &dice->dwork); |
| |
| return 0; |
| } |
| |
| static void dice_remove(struct fw_unit *unit) |
| { |
| struct snd_dice *dice = dev_get_drvdata(&unit->device); |
| |
| /* |
| * Confirm to stop the work for registration before the sound card is |
| * going to be released. The work is not scheduled again because bus |
| * reset handler is not called anymore. |
| */ |
| cancel_delayed_work_sync(&dice->dwork); |
| |
| if (dice->registered) { |
| /* No need to wait for releasing card object in this context. */ |
| snd_card_free_when_closed(dice->card); |
| } else { |
| /* Don't forget this case. */ |
| dice_free(dice); |
| } |
| } |
| |
| static void dice_bus_reset(struct fw_unit *unit) |
| { |
| struct snd_dice *dice = dev_get_drvdata(&unit->device); |
| |
| /* Postpone a workqueue for deferred registration. */ |
| if (!dice->registered) |
| snd_fw_schedule_registration(unit, &dice->dwork); |
| |
| /* The handler address register becomes initialized. */ |
| snd_dice_transaction_reinit(dice); |
| |
| /* |
| * After registration, userspace can start packet streaming, then this |
| * code block works fine. |
| */ |
| if (dice->registered) { |
| mutex_lock(&dice->mutex); |
| snd_dice_stream_update_duplex(dice); |
| mutex_unlock(&dice->mutex); |
| } |
| } |
| |
| #define DICE_INTERFACE 0x000001 |
| |
| static const struct ieee1394_device_id dice_id_table[] = { |
| /* M-Audio Profire 2626 has a different value in version field. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_MAUDIO, |
| .model_id = 0x000010, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats, |
| }, |
| /* M-Audio Profire 610 has a different value in version field. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_MAUDIO, |
| .model_id = 0x000011, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats, |
| }, |
| /* TC Electronic Konnekt 24D. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000020, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Konnekt 8. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000021, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Studio Konnekt 48. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000022, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Konnekt Live. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000023, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Desktop Konnekt 6. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000024, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Impact Twin. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000027, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* TC Electronic Digital Konnekt x32. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_TCELECTRONIC, |
| .model_id = 0x000030, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, |
| }, |
| /* Alesis iO14/iO26. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_ALESIS, |
| .model_id = MODEL_ALESIS_IO_BOTH, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_alesis_formats, |
| }, |
| /* Mytek Stereo 192 DSD-DAC. */ |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_MYTEK, |
| .model_id = 0x000002, |
| .driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats, |
| }, |
| // Solid State Logic, Duende Classic and Mini. |
| // NOTE: each field of GUID in config ROM is not compliant to standard |
| // DICE scheme. |
| { |
| .match_flags = IEEE1394_MATCH_VENDOR_ID | |
| IEEE1394_MATCH_MODEL_ID, |
| .vendor_id = OUI_SSL, |
| .model_id = 0x000070, |
| }, |
| { |
| .match_flags = IEEE1394_MATCH_VERSION, |
| .version = DICE_INTERFACE, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(ieee1394, dice_id_table); |
| |
| static struct fw_driver dice_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = KBUILD_MODNAME, |
| .bus = &fw_bus_type, |
| }, |
| .probe = dice_probe, |
| .update = dice_bus_reset, |
| .remove = dice_remove, |
| .id_table = dice_id_table, |
| }; |
| |
| static int __init alsa_dice_init(void) |
| { |
| return driver_register(&dice_driver.driver); |
| } |
| |
| static void __exit alsa_dice_exit(void) |
| { |
| driver_unregister(&dice_driver.driver); |
| } |
| |
| module_init(alsa_dice_init); |
| module_exit(alsa_dice_exit); |