| #include <dt-bindings/interrupt-controller/mips-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "mediatek,mt7621-soc"; |
| |
| cpus { |
| cpu@0 { |
| compatible = "mips,mips1004Kc"; |
| }; |
| |
| cpu@1 { |
| compatible = "mips,mips1004Kc"; |
| }; |
| }; |
| |
| cpuintc: cpuintc@0 { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| aliases { |
| serial0 = &uartlite; |
| }; |
| |
| cpuclock: cpuclock@0 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| |
| /* FIXME: there should be way to detect this */ |
| clock-frequency = <880000000>; |
| }; |
| |
| sysclock: sysclock@0 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| |
| /* This is normally 1/4 of cpuclock */ |
| clock-frequency = <220000000>; |
| }; |
| |
| palmbus: palmbus@1E000000 { |
| compatible = "palmbus"; |
| reg = <0x1E000000 0x100000>; |
| ranges = <0x0 0x1E000000 0x0FFFFF>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| sysc: sysc@0 { |
| compatible = "mtk,mt7621-sysc"; |
| reg = <0x0 0x100>; |
| }; |
| |
| wdt: wdt@100 { |
| compatible = "mtk,mt7621-wdt"; |
| reg = <0x100 0x100>; |
| }; |
| |
| gpio: gpio@600 { |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| compatible = "mediatek,mt7621-gpio"; |
| gpio-controller; |
| interrupt-controller; |
| reg = <0x600 0x100>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| i2c: i2c@900 { |
| compatible = "mediatek,mt7621-i2c"; |
| reg = <0x900 0x100>; |
| |
| clocks = <&sysclock>; |
| |
| resets = <&rstctrl 16>; |
| reset-names = "i2c"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c_pins>; |
| }; |
| |
| i2s: i2s@a00 { |
| compatible = "mediatek,mt7621-i2s"; |
| reg = <0xa00 0x100>; |
| |
| clocks = <&sysclock>; |
| |
| resets = <&rstctrl 17>; |
| reset-names = "i2s"; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>; |
| |
| txdma-req = <2>; |
| rxdma-req = <3>; |
| |
| dmas = <&gdma 4>, |
| <&gdma 6>; |
| dma-names = "tx", "rx"; |
| |
| status = "disabled"; |
| }; |
| |
| memc: memc@5000 { |
| compatible = "mtk,mt7621-memc"; |
| reg = <0x300 0x100>; |
| }; |
| |
| cpc: cpc@1fbf0000 { |
| compatible = "mtk,mt7621-cpc"; |
| reg = <0x1fbf0000 0x8000>; |
| }; |
| |
| mc: mc@1fbf8000 { |
| compatible = "mtk,mt7621-mc"; |
| reg = <0x1fbf8000 0x8000>; |
| }; |
| |
| uartlite: uartlite@c00 { |
| compatible = "ns16550a"; |
| reg = <0xc00 0x100>; |
| |
| clocks = <&sysclock>; |
| clock-frequency = <50000000>; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; |
| |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| no-loopback-test; |
| }; |
| |
| spi0: spi@b00 { |
| status = "disabled"; |
| |
| compatible = "ralink,mt7621-spi"; |
| reg = <0xb00 0x100>; |
| |
| clocks = <&sysclock>; |
| |
| resets = <&rstctrl 18>; |
| reset-names = "spi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi_pins>; |
| }; |
| |
| gdma: gdma@2800 { |
| compatible = "ralink,rt3883-gdma"; |
| reg = <0x2800 0x800>; |
| |
| resets = <&rstctrl 14>; |
| reset-names = "dma"; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <0 13 4>; |
| |
| #dma-cells = <1>; |
| #dma-channels = <16>; |
| #dma-requests = <16>; |
| |
| status = "disabled"; |
| }; |
| |
| hsdma: hsdma@7000 { |
| compatible = "mediatek,mt7621-hsdma"; |
| reg = <0x7000 0x1000>; |
| |
| resets = <&rstctrl 5>; |
| reset-names = "hsdma"; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <0 11 4>; |
| |
| #dma-cells = <1>; |
| #dma-channels = <1>; |
| #dma-requests = <1>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "ralink,rt2880-pinmux"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&state_default>; |
| |
| state_default: pinctrl0 { |
| }; |
| |
| i2c_pins: i2c { |
| i2c { |
| group = "i2c"; |
| function = "i2c"; |
| }; |
| }; |
| |
| spi_pins: spi { |
| spi { |
| group = "spi"; |
| function = "spi"; |
| }; |
| }; |
| |
| uart1_pins: uart1 { |
| uart1 { |
| group = "uart1"; |
| function = "uart1"; |
| }; |
| }; |
| |
| uart2_pins: uart2 { |
| uart2 { |
| group = "uart2"; |
| function = "uart2"; |
| }; |
| }; |
| |
| uart3_pins: uart3 { |
| uart3 { |
| group = "uart3"; |
| function = "uart3"; |
| }; |
| }; |
| |
| rgmii1_pins: rgmii1 { |
| rgmii1 { |
| group = "rgmii1"; |
| function = "rgmii1"; |
| }; |
| }; |
| |
| rgmii2_pins: rgmii2 { |
| rgmii2 { |
| group = "rgmii2"; |
| function = "rgmii2"; |
| }; |
| }; |
| |
| mdio_pins: mdio { |
| mdio { |
| group = "mdio"; |
| function = "mdio"; |
| }; |
| }; |
| |
| pcie_pins: pcie { |
| pcie { |
| group = "pcie"; |
| function = "pcie rst"; |
| }; |
| }; |
| |
| nand_pins: nand { |
| spi-nand { |
| group = "spi"; |
| function = "nand1"; |
| }; |
| |
| sdhci-nand { |
| group = "sdhci"; |
| function = "nand2"; |
| }; |
| }; |
| |
| sdhci_pins: sdhci { |
| sdhci { |
| group = "sdhci"; |
| function = "sdhci"; |
| }; |
| }; |
| }; |
| |
| rstctrl: rstctrl { |
| compatible = "ralink,rt2880-reset"; |
| #reset-cells = <1>; |
| }; |
| |
| clkctrl: clkctrl { |
| compatible = "ralink,rt2880-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| sdhci: sdhci@1E130000 { |
| status = "disabled"; |
| |
| compatible = "ralink,mt7620-sdhci"; |
| reg = <0x1E130000 0x4000>; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| xhci: xhci@1E1C0000 { |
| status = "okay"; |
| |
| compatible = "mediatek,mt8173-xhci"; |
| reg = <0x1e1c0000 0x1000 |
| 0x1e1d0700 0x0100>; |
| reg-names = "mac", "ippc"; |
| |
| clocks = <&sysclock>; |
| clock-names = "sys_ck"; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gic: interrupt-controller@1fbc0000 { |
| compatible = "mti,gic"; |
| reg = <0x1fbc0000 0x2000>; |
| |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| mti,reserved-cpu-vectors = <7>; |
| |
| timer { |
| compatible = "mti,gic-timer"; |
| interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; |
| clocks = <&cpuclock>; |
| }; |
| }; |
| |
| nand: nand@1e003000 { |
| status = "disabled"; |
| |
| compatible = "mtk,mt7621-nand"; |
| bank-width = <2>; |
| reg = <0x1e003000 0x800 |
| 0x1e003800 0x800>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| ethsys: syscon@1e000000 { |
| compatible = "mediatek,mt7621-ethsys", |
| "syscon"; |
| reg = <0x1e000000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| ethernet: ethernet@1e100000 { |
| compatible = "mediatek,mt7621-eth"; |
| reg = <0x1e100000 0x10000>; |
| |
| clocks = <&sysclock>; |
| clock-names = "ethif"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| resets = <&rstctrl 6 &rstctrl 23>; |
| reset-names = "fe", "eth"; |
| |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; |
| |
| mediatek,ethsys = <ðsys>; |
| |
| mediatek,switch = <&gsw>; |
| |
| mdio-bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| phy1f: ethernet-phy@1f { |
| reg = <0x1f>; |
| phy-mode = "rgmii"; |
| }; |
| }; |
| }; |
| |
| gsw: gsw@1e110000 { |
| compatible = "mediatek,mt7621-gsw"; |
| reg = <0x1e110000 0x8000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pcie: pcie@1e140000 { |
| compatible = "mediatek,mt7621-pci"; |
| reg = <0x1e140000 0x100 /* host-pci bridge registers */ |
| 0x1e142000 0x100 /* pcie port 0 RC control registers */ |
| 0x1e143000 0x100 /* pcie port 1 RC control registers */ |
| 0x1e144000 0x100>; /* pcie port 2 RC control registers */ |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie_pins>; |
| |
| device_type = "pci"; |
| |
| bus-range = <0 255>; |
| ranges = < |
| 0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */ |
| 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */ |
| >; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xF0000 0 0 1>; |
| interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, |
| <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, |
| <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; |
| |
| status = "disabled"; |
| |
| resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>; |
| reset-names = "pcie0", "pcie1", "pcie2"; |
| clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>; |
| clock-names = "pcie0", "pcie1", "pcie2"; |
| |
| pcie@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| bus-range = <0x00 0xff>; |
| }; |
| |
| pcie@1,0 { |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| bus-range = <0x00 0xff>; |
| }; |
| |
| pcie@2,0 { |
| reg = <0x1000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| bus-range = <0x00 0xff>; |
| }; |
| }; |
| }; |
