| /* |
| * HP Human Interface Loop Master Link Controller driver. |
| * |
| * Copyright (c) 2001 Brian S. Julin |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL"). |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * |
| * References: |
| * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A |
| * |
| */ |
| |
| #include <linux/hil.h> |
| #include <linux/time.h> |
| #include <linux/interrupt.h> |
| #include <linux/semaphore.h> |
| #include <linux/serio.h> |
| #include <linux/list.h> |
| |
| typedef struct hil_mlc hil_mlc; |
| |
| /* The HIL has a complicated state engine. |
| * We define the structure of nodes in the state engine here. |
| */ |
| enum hilse_act { |
| /* HILSE_OUT prepares to receive input if the next node |
| * is an IN or EXPECT, and then sends the given packet. |
| */ |
| HILSE_OUT = 0, |
| |
| /* HILSE_CTS checks if the loop is busy. */ |
| HILSE_CTS, |
| |
| /* HILSE_OUT_LAST sends the given command packet to |
| * the last configured/running device on the loop. |
| */ |
| HILSE_OUT_LAST, |
| |
| /* HILSE_OUT_DISC sends the given command packet to |
| * the next device past the last configured/running one. |
| */ |
| HILSE_OUT_DISC, |
| |
| /* HILSE_FUNC runs a callback function with given arguments. |
| * a positive return value causes the "ugly" branch to be taken. |
| */ |
| HILSE_FUNC, |
| |
| /* HILSE_IN simply expects any non-errored packet to arrive |
| * within arg usecs. |
| */ |
| HILSE_IN = 0x100, |
| |
| /* HILSE_EXPECT expects a particular packet to arrive |
| * within arg usecs, any other packet is considered an error. |
| */ |
| HILSE_EXPECT, |
| |
| /* HILSE_EXPECT_LAST as above but dev field should be last |
| * discovered/operational device. |
| */ |
| HILSE_EXPECT_LAST, |
| |
| /* HILSE_EXPECT_LAST as above but dev field should be first |
| * undiscovered/inoperational device. |
| */ |
| HILSE_EXPECT_DISC |
| }; |
| |
| typedef int (hilse_func) (hil_mlc *mlc, int arg); |
| struct hilse_node { |
| enum hilse_act act; /* How to process this node */ |
| union { |
| hilse_func *func; /* Function to call if HILSE_FUNC */ |
| hil_packet packet; /* Packet to send or to compare */ |
| } object; |
| int arg; /* Timeout in usec or parm for func */ |
| int good; /* Node to jump to on success */ |
| int bad; /* Node to jump to on error */ |
| int ugly; /* Node to jump to on timeout */ |
| }; |
| |
| /* Methods for back-end drivers, e.g. hp_sdc_mlc */ |
| typedef int (hil_mlc_cts) (hil_mlc *mlc); |
| typedef void (hil_mlc_out) (hil_mlc *mlc); |
| typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout); |
| |
| struct hil_mlc_devinfo { |
| uint8_t idd[16]; /* Device ID Byte and Describe Record */ |
| uint8_t rsc[16]; /* Security Code Header and Record */ |
| uint8_t exd[16]; /* Extended Describe Record */ |
| uint8_t rnm[16]; /* Device name as returned by RNM command */ |
| }; |
| |
| struct hil_mlc_serio_map { |
| hil_mlc *mlc; |
| int di_revmap; |
| int didx; |
| }; |
| |
| /* How many (possibly old/detached) devices the we try to keep track of */ |
| #define HIL_MLC_DEVMEM 16 |
| |
| struct hil_mlc { |
| struct list_head list; /* hil_mlc is organized as linked list */ |
| |
| rwlock_t lock; |
| |
| void *priv; /* Data specific to a particular type of MLC */ |
| |
| int seidx; /* Current node in state engine */ |
| int istarted, ostarted; |
| |
| hil_mlc_cts *cts; |
| struct semaphore csem; /* Raised when loop idle */ |
| |
| hil_mlc_out *out; |
| struct semaphore osem; /* Raised when outpacket dispatched */ |
| hil_packet opacket; |
| |
| hil_mlc_in *in; |
| struct semaphore isem; /* Raised when a packet arrives */ |
| hil_packet ipacket[16]; |
| hil_packet imatch; |
| int icount; |
| unsigned long instart; |
| unsigned long intimeout; |
| |
| int ddi; /* Last operational device id */ |
| int lcv; /* LCV to throttle loops */ |
| time64_t lcv_time; /* Time loop was started */ |
| |
| int di_map[7]; /* Maps below items to live devs */ |
| struct hil_mlc_devinfo di[HIL_MLC_DEVMEM]; |
| struct serio *serio[HIL_MLC_DEVMEM]; |
| struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM]; |
| hil_packet serio_opacket[HIL_MLC_DEVMEM]; |
| int serio_oidx[HIL_MLC_DEVMEM]; |
| struct hil_mlc_devinfo di_scratch; /* Temporary area */ |
| |
| int opercnt; |
| |
| struct tasklet_struct *tasklet; |
| }; |
| |
| int hil_mlc_register(hil_mlc *mlc); |
| int hil_mlc_unregister(hil_mlc *mlc); |