| /* |
| * Fake VME bridge support. |
| * |
| * This drive provides a fake VME bridge chip, this enables debugging of the |
| * VME framework in the absence of a VME system. |
| * |
| * This driver has to do a number of things in software that would be driven |
| * by hardware if it was available, it will also result in extra overhead at |
| * times when compared with driving actual hardware. |
| * |
| * Author: Martyn Welch <martyn@welches.me.uk> |
| * Copyright (c) 2014 Martyn Welch |
| * |
| * Based on vme_tsi148.c: |
| * |
| * Author: Martyn Welch <martyn.welch@ge.com> |
| * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. |
| * |
| * Based on work by Tom Armistead and Ajit Prem |
| * Copyright 2004 Motorola Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| #include <linux/vme.h> |
| |
| #include "../vme_bridge.h" |
| |
| /* |
| * Define the number of each that the fake driver supports. |
| */ |
| #define FAKE_MAX_MASTER 8 /* Max Master Windows */ |
| #define FAKE_MAX_SLAVE 8 /* Max Slave Windows */ |
| |
| /* Structures to hold information normally held in device registers */ |
| struct fake_slave_window { |
| int enabled; |
| unsigned long long vme_base; |
| unsigned long long size; |
| void *buf_base; |
| u32 aspace; |
| u32 cycle; |
| }; |
| |
| struct fake_master_window { |
| int enabled; |
| unsigned long long vme_base; |
| unsigned long long size; |
| u32 aspace; |
| u32 cycle; |
| u32 dwidth; |
| }; |
| |
| /* Structure used to hold driver specific information */ |
| struct fake_driver { |
| struct vme_bridge *parent; |
| struct fake_slave_window slaves[FAKE_MAX_SLAVE]; |
| struct fake_master_window masters[FAKE_MAX_MASTER]; |
| u32 lm_enabled; |
| unsigned long long lm_base; |
| u32 lm_aspace; |
| u32 lm_cycle; |
| void (*lm_callback[4])(void *); |
| void *lm_data[4]; |
| struct tasklet_struct int_tasklet; |
| int int_level; |
| int int_statid; |
| void *crcsr_kernel; |
| dma_addr_t crcsr_bus; |
| /* Only one VME interrupt can be generated at a time, provide locking */ |
| struct mutex vme_int; |
| }; |
| |
| /* Module parameter */ |
| static int geoid; |
| |
| static const char driver_name[] = "vme_fake"; |
| |
| static struct vme_bridge *exit_pointer; |
| |
| static struct device *vme_root; |
| |
| /* |
| * Calling VME bus interrupt callback if provided. |
| */ |
| static void fake_VIRQ_tasklet(unsigned long data) |
| { |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = (struct vme_bridge *) data; |
| bridge = fake_bridge->driver_priv; |
| |
| vme_irq_handler(fake_bridge, bridge->int_level, bridge->int_statid); |
| } |
| |
| /* |
| * Configure VME interrupt |
| */ |
| static void fake_irq_set(struct vme_bridge *fake_bridge, int level, |
| int state, int sync) |
| { |
| /* Nothing to do */ |
| } |
| |
| static void *fake_pci_to_ptr(dma_addr_t addr) |
| { |
| return (void *)(uintptr_t)addr; |
| } |
| |
| static dma_addr_t fake_ptr_to_pci(void *addr) |
| { |
| return (dma_addr_t)(uintptr_t)addr; |
| } |
| |
| /* |
| * Generate a VME bus interrupt at the requested level & vector. Wait for |
| * interrupt to be acked. |
| */ |
| static int fake_irq_generate(struct vme_bridge *fake_bridge, int level, |
| int statid) |
| { |
| struct fake_driver *bridge; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| mutex_lock(&bridge->vme_int); |
| |
| bridge->int_level = level; |
| |
| bridge->int_statid = statid; |
| |
| /* |
| * Schedule tasklet to run VME handler to emulate normal VME interrupt |
| * handler behaviour. |
| */ |
| tasklet_schedule(&bridge->int_tasklet); |
| |
| mutex_unlock(&bridge->vme_int); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize a slave window with the requested attributes. |
| */ |
| static int fake_slave_set(struct vme_slave_resource *image, int enabled, |
| unsigned long long vme_base, unsigned long long size, |
| dma_addr_t buf_base, u32 aspace, u32 cycle) |
| { |
| unsigned int i, granularity = 0; |
| unsigned long long vme_bound; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = image->parent; |
| bridge = fake_bridge->driver_priv; |
| |
| i = image->number; |
| |
| switch (aspace) { |
| case VME_A16: |
| granularity = 0x10; |
| break; |
| case VME_A24: |
| granularity = 0x1000; |
| break; |
| case VME_A32: |
| granularity = 0x10000; |
| break; |
| case VME_A64: |
| granularity = 0x10000; |
| break; |
| case VME_CRCSR: |
| case VME_USER1: |
| case VME_USER2: |
| case VME_USER3: |
| case VME_USER4: |
| default: |
| pr_err("Invalid address space\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Bound address is a valid address for the window, adjust |
| * accordingly |
| */ |
| vme_bound = vme_base + size - granularity; |
| |
| if (vme_base & (granularity - 1)) { |
| pr_err("Invalid VME base alignment\n"); |
| return -EINVAL; |
| } |
| if (vme_bound & (granularity - 1)) { |
| pr_err("Invalid VME bound alignment\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&image->mtx); |
| |
| bridge->slaves[i].enabled = enabled; |
| bridge->slaves[i].vme_base = vme_base; |
| bridge->slaves[i].size = size; |
| bridge->slaves[i].buf_base = fake_pci_to_ptr(buf_base); |
| bridge->slaves[i].aspace = aspace; |
| bridge->slaves[i].cycle = cycle; |
| |
| mutex_unlock(&image->mtx); |
| |
| return 0; |
| } |
| |
| /* |
| * Get slave window configuration. |
| */ |
| static int fake_slave_get(struct vme_slave_resource *image, int *enabled, |
| unsigned long long *vme_base, unsigned long long *size, |
| dma_addr_t *buf_base, u32 *aspace, u32 *cycle) |
| { |
| unsigned int i; |
| struct fake_driver *bridge; |
| |
| bridge = image->parent->driver_priv; |
| |
| i = image->number; |
| |
| mutex_lock(&image->mtx); |
| |
| *enabled = bridge->slaves[i].enabled; |
| *vme_base = bridge->slaves[i].vme_base; |
| *size = bridge->slaves[i].size; |
| *buf_base = fake_ptr_to_pci(bridge->slaves[i].buf_base); |
| *aspace = bridge->slaves[i].aspace; |
| *cycle = bridge->slaves[i].cycle; |
| |
| mutex_unlock(&image->mtx); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the attributes of an outbound window. |
| */ |
| static int fake_master_set(struct vme_master_resource *image, int enabled, |
| unsigned long long vme_base, unsigned long long size, |
| u32 aspace, u32 cycle, u32 dwidth) |
| { |
| int retval = 0; |
| unsigned int i; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = image->parent; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| /* Verify input data */ |
| if (vme_base & 0xFFFF) { |
| pr_err("Invalid VME Window alignment\n"); |
| retval = -EINVAL; |
| goto err_window; |
| } |
| |
| if (size & 0xFFFF) { |
| pr_err("Invalid size alignment\n"); |
| retval = -EINVAL; |
| goto err_window; |
| } |
| |
| if ((size == 0) && (enabled != 0)) { |
| pr_err("Size must be non-zero for enabled windows\n"); |
| retval = -EINVAL; |
| goto err_window; |
| } |
| |
| /* Setup data width */ |
| switch (dwidth) { |
| case VME_D8: |
| case VME_D16: |
| case VME_D32: |
| break; |
| default: |
| pr_err("Invalid data width\n"); |
| retval = -EINVAL; |
| goto err_dwidth; |
| } |
| |
| /* Setup address space */ |
| switch (aspace) { |
| case VME_A16: |
| case VME_A24: |
| case VME_A32: |
| case VME_A64: |
| case VME_CRCSR: |
| case VME_USER1: |
| case VME_USER2: |
| case VME_USER3: |
| case VME_USER4: |
| break; |
| default: |
| pr_err("Invalid address space\n"); |
| retval = -EINVAL; |
| goto err_aspace; |
| } |
| |
| spin_lock(&image->lock); |
| |
| i = image->number; |
| |
| bridge->masters[i].enabled = enabled; |
| bridge->masters[i].vme_base = vme_base; |
| bridge->masters[i].size = size; |
| bridge->masters[i].aspace = aspace; |
| bridge->masters[i].cycle = cycle; |
| bridge->masters[i].dwidth = dwidth; |
| |
| spin_unlock(&image->lock); |
| |
| return 0; |
| |
| err_aspace: |
| err_dwidth: |
| err_window: |
| return retval; |
| |
| } |
| |
| /* |
| * Set the attributes of an outbound window. |
| */ |
| static int __fake_master_get(struct vme_master_resource *image, int *enabled, |
| unsigned long long *vme_base, unsigned long long *size, |
| u32 *aspace, u32 *cycle, u32 *dwidth) |
| { |
| unsigned int i; |
| struct fake_driver *bridge; |
| |
| bridge = image->parent->driver_priv; |
| |
| i = image->number; |
| |
| *enabled = bridge->masters[i].enabled; |
| *vme_base = bridge->masters[i].vme_base; |
| *size = bridge->masters[i].size; |
| *aspace = bridge->masters[i].aspace; |
| *cycle = bridge->masters[i].cycle; |
| *dwidth = bridge->masters[i].dwidth; |
| |
| return 0; |
| } |
| |
| |
| static int fake_master_get(struct vme_master_resource *image, int *enabled, |
| unsigned long long *vme_base, unsigned long long *size, |
| u32 *aspace, u32 *cycle, u32 *dwidth) |
| { |
| int retval; |
| |
| spin_lock(&image->lock); |
| |
| retval = __fake_master_get(image, enabled, vme_base, size, aspace, |
| cycle, dwidth); |
| |
| spin_unlock(&image->lock); |
| |
| return retval; |
| } |
| |
| |
| static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| struct vme_bridge *fake_bridge; |
| unsigned long long lm_base; |
| u32 lm_aspace, lm_cycle; |
| int i; |
| struct vme_lm_resource *lm; |
| struct list_head *pos = NULL, *n; |
| |
| /* Get vme_bridge */ |
| fake_bridge = bridge->parent; |
| |
| /* Loop through each location monitor resource */ |
| list_for_each_safe(pos, n, &fake_bridge->lm_resources) { |
| lm = list_entry(pos, struct vme_lm_resource, list); |
| |
| /* If disabled, we're done */ |
| if (bridge->lm_enabled == 0) |
| return; |
| |
| lm_base = bridge->lm_base; |
| lm_aspace = bridge->lm_aspace; |
| lm_cycle = bridge->lm_cycle; |
| |
| /* First make sure that the cycle and address space match */ |
| if ((lm_aspace == aspace) && (lm_cycle == cycle)) { |
| for (i = 0; i < lm->monitors; i++) { |
| /* Each location monitor covers 8 bytes */ |
| if (((lm_base + (8 * i)) <= addr) && |
| ((lm_base + (8 * i) + 8) > addr)) { |
| if (bridge->lm_callback[i]) |
| bridge->lm_callback[i]( |
| bridge->lm_data[i]); |
| } |
| } |
| } |
| } |
| } |
| |
| static noinline_for_stack u8 fake_vmeread8(struct fake_driver *bridge, |
| unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| u8 retval = 0xff; |
| int i; |
| unsigned long long start, end, offset; |
| u8 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| if ((addr >= start) && (addr < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u8 *)(bridge->slaves[i].buf_base + offset); |
| retval = *loc; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| return retval; |
| } |
| |
| static noinline_for_stack u16 fake_vmeread16(struct fake_driver *bridge, |
| unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| u16 retval = 0xffff; |
| int i; |
| unsigned long long start, end, offset; |
| u16 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if ((addr >= start) && ((addr + 1) < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u16 *)(bridge->slaves[i].buf_base + offset); |
| retval = *loc; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| return retval; |
| } |
| |
| static noinline_for_stack u32 fake_vmeread32(struct fake_driver *bridge, |
| unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| u32 retval = 0xffffffff; |
| int i; |
| unsigned long long start, end, offset; |
| u32 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if ((addr >= start) && ((addr + 3) < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u32 *)(bridge->slaves[i].buf_base + offset); |
| retval = *loc; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| return retval; |
| } |
| |
| static ssize_t fake_master_read(struct vme_master_resource *image, void *buf, |
| size_t count, loff_t offset) |
| { |
| int retval; |
| u32 aspace, cycle, dwidth; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *priv; |
| int i; |
| unsigned long long addr; |
| unsigned int done = 0; |
| unsigned int count32; |
| |
| fake_bridge = image->parent; |
| |
| priv = fake_bridge->driver_priv; |
| |
| i = image->number; |
| |
| addr = (unsigned long long)priv->masters[i].vme_base + offset; |
| aspace = priv->masters[i].aspace; |
| cycle = priv->masters[i].cycle; |
| dwidth = priv->masters[i].dwidth; |
| |
| spin_lock(&image->lock); |
| |
| /* The following code handles VME address alignment. We cannot use |
| * memcpy_xxx here because it may cut data transfers in to 8-bit |
| * cycles when D16 or D32 cycles are required on the VME bus. |
| * On the other hand, the bridge itself assures that the maximum data |
| * cycle configured for the transfer is used and splits it |
| * automatically for non-aligned addresses, so we don't want the |
| * overhead of needlessly forcing small transfers for the entire cycle. |
| */ |
| if (addr & 0x1) { |
| *(u8 *)buf = fake_vmeread8(priv, addr, aspace, cycle); |
| done += 1; |
| if (done == count) |
| goto out; |
| } |
| if ((dwidth == VME_D16) || (dwidth == VME_D32)) { |
| if ((addr + done) & 0x2) { |
| if ((count - done) < 2) { |
| *(u8 *)(buf + done) = fake_vmeread8(priv, |
| addr + done, aspace, cycle); |
| done += 1; |
| goto out; |
| } else { |
| *(u16 *)(buf + done) = fake_vmeread16(priv, |
| addr + done, aspace, cycle); |
| done += 2; |
| } |
| } |
| } |
| |
| if (dwidth == VME_D32) { |
| count32 = (count - done) & ~0x3; |
| while (done < count32) { |
| *(u32 *)(buf + done) = fake_vmeread32(priv, addr + done, |
| aspace, cycle); |
| done += 4; |
| } |
| } else if (dwidth == VME_D16) { |
| count32 = (count - done) & ~0x3; |
| while (done < count32) { |
| *(u16 *)(buf + done) = fake_vmeread16(priv, addr + done, |
| aspace, cycle); |
| done += 2; |
| } |
| } else if (dwidth == VME_D8) { |
| count32 = (count - done); |
| while (done < count32) { |
| *(u8 *)(buf + done) = fake_vmeread8(priv, addr + done, |
| aspace, cycle); |
| done += 1; |
| } |
| |
| } |
| |
| if ((dwidth == VME_D16) || (dwidth == VME_D32)) { |
| if ((count - done) & 0x2) { |
| *(u16 *)(buf + done) = fake_vmeread16(priv, addr + done, |
| aspace, cycle); |
| done += 2; |
| } |
| } |
| if ((count - done) & 0x1) { |
| *(u8 *)(buf + done) = fake_vmeread8(priv, addr + done, aspace, |
| cycle); |
| done += 1; |
| } |
| |
| out: |
| retval = count; |
| |
| spin_unlock(&image->lock); |
| |
| return retval; |
| } |
| |
| static noinline_for_stack void fake_vmewrite8(struct fake_driver *bridge, |
| u8 *buf, unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| int i; |
| unsigned long long start, end, offset; |
| u8 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if ((addr >= start) && (addr < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u8 *)((void *)bridge->slaves[i].buf_base + offset); |
| *loc = *buf; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| } |
| |
| static noinline_for_stack void fake_vmewrite16(struct fake_driver *bridge, |
| u16 *buf, unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| int i; |
| unsigned long long start, end, offset; |
| u16 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if ((addr >= start) && ((addr + 1) < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u16 *)((void *)bridge->slaves[i].buf_base + offset); |
| *loc = *buf; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| } |
| |
| static noinline_for_stack void fake_vmewrite32(struct fake_driver *bridge, |
| u32 *buf, unsigned long long addr, |
| u32 aspace, u32 cycle) |
| { |
| int i; |
| unsigned long long start, end, offset; |
| u32 *loc; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| if (aspace != bridge->slaves[i].aspace) |
| continue; |
| |
| if (cycle != bridge->slaves[i].cycle) |
| continue; |
| |
| start = bridge->slaves[i].vme_base; |
| end = bridge->slaves[i].vme_base + bridge->slaves[i].size; |
| |
| if ((addr >= start) && ((addr + 3) < end)) { |
| offset = addr - bridge->slaves[i].vme_base; |
| loc = (u32 *)((void *)bridge->slaves[i].buf_base + offset); |
| *loc = *buf; |
| |
| break; |
| } |
| } |
| |
| fake_lm_check(bridge, addr, aspace, cycle); |
| |
| } |
| |
| static ssize_t fake_master_write(struct vme_master_resource *image, void *buf, |
| size_t count, loff_t offset) |
| { |
| int retval = 0; |
| u32 aspace, cycle, dwidth; |
| unsigned long long addr; |
| int i; |
| unsigned int done = 0; |
| unsigned int count32; |
| |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = image->parent; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| i = image->number; |
| |
| addr = bridge->masters[i].vme_base + offset; |
| aspace = bridge->masters[i].aspace; |
| cycle = bridge->masters[i].cycle; |
| dwidth = bridge->masters[i].dwidth; |
| |
| spin_lock(&image->lock); |
| |
| /* Here we apply for the same strategy we do in master_read |
| * function in order to assure the correct cycles. |
| */ |
| if (addr & 0x1) { |
| fake_vmewrite8(bridge, (u8 *)buf, addr, aspace, cycle); |
| done += 1; |
| if (done == count) |
| goto out; |
| } |
| |
| if ((dwidth == VME_D16) || (dwidth == VME_D32)) { |
| if ((addr + done) & 0x2) { |
| if ((count - done) < 2) { |
| fake_vmewrite8(bridge, (u8 *)(buf + done), |
| addr + done, aspace, cycle); |
| done += 1; |
| goto out; |
| } else { |
| fake_vmewrite16(bridge, (u16 *)(buf + done), |
| addr + done, aspace, cycle); |
| done += 2; |
| } |
| } |
| } |
| |
| if (dwidth == VME_D32) { |
| count32 = (count - done) & ~0x3; |
| while (done < count32) { |
| fake_vmewrite32(bridge, (u32 *)(buf + done), |
| addr + done, aspace, cycle); |
| done += 4; |
| } |
| } else if (dwidth == VME_D16) { |
| count32 = (count - done) & ~0x3; |
| while (done < count32) { |
| fake_vmewrite16(bridge, (u16 *)(buf + done), |
| addr + done, aspace, cycle); |
| done += 2; |
| } |
| } else if (dwidth == VME_D8) { |
| count32 = (count - done); |
| while (done < count32) { |
| fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done, |
| aspace, cycle); |
| done += 1; |
| } |
| |
| } |
| |
| if ((dwidth == VME_D16) || (dwidth == VME_D32)) { |
| if ((count - done) & 0x2) { |
| fake_vmewrite16(bridge, (u16 *)(buf + done), |
| addr + done, aspace, cycle); |
| done += 2; |
| } |
| } |
| |
| if ((count - done) & 0x1) { |
| fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done, aspace, |
| cycle); |
| done += 1; |
| } |
| |
| out: |
| retval = count; |
| |
| spin_unlock(&image->lock); |
| |
| return retval; |
| } |
| |
| /* |
| * Perform an RMW cycle on the VME bus. |
| * |
| * Requires a previously configured master window, returns final value. |
| */ |
| static unsigned int fake_master_rmw(struct vme_master_resource *image, |
| unsigned int mask, unsigned int compare, unsigned int swap, |
| loff_t offset) |
| { |
| u32 tmp, base; |
| u32 aspace, cycle; |
| int i; |
| struct fake_driver *bridge; |
| |
| bridge = image->parent->driver_priv; |
| |
| /* Find the PCI address that maps to the desired VME address */ |
| i = image->number; |
| |
| base = bridge->masters[i].vme_base; |
| aspace = bridge->masters[i].aspace; |
| cycle = bridge->masters[i].cycle; |
| |
| /* Lock image */ |
| spin_lock(&image->lock); |
| |
| /* Read existing value */ |
| tmp = fake_vmeread32(bridge, base + offset, aspace, cycle); |
| |
| /* Perform check */ |
| if ((tmp && mask) == (compare && mask)) { |
| tmp = tmp | (mask | swap); |
| tmp = tmp & (~mask | swap); |
| |
| /* Write back */ |
| fake_vmewrite32(bridge, &tmp, base + offset, aspace, cycle); |
| } |
| |
| /* Unlock image */ |
| spin_unlock(&image->lock); |
| |
| return tmp; |
| } |
| |
| /* |
| * All 4 location monitors reside at the same base - this is therefore a |
| * system wide configuration. |
| * |
| * This does not enable the LM monitor - that should be done when the first |
| * callback is attached and disabled when the last callback is removed. |
| */ |
| static int fake_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, |
| u32 aspace, u32 cycle) |
| { |
| int i; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = lm->parent; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| mutex_lock(&lm->mtx); |
| |
| /* If we already have a callback attached, we can't move it! */ |
| for (i = 0; i < lm->monitors; i++) { |
| if (bridge->lm_callback[i]) { |
| mutex_unlock(&lm->mtx); |
| pr_err("Location monitor callback attached, can't reset\n"); |
| return -EBUSY; |
| } |
| } |
| |
| switch (aspace) { |
| case VME_A16: |
| case VME_A24: |
| case VME_A32: |
| case VME_A64: |
| break; |
| default: |
| mutex_unlock(&lm->mtx); |
| pr_err("Invalid address space\n"); |
| return -EINVAL; |
| } |
| |
| bridge->lm_base = lm_base; |
| bridge->lm_aspace = aspace; |
| bridge->lm_cycle = cycle; |
| |
| mutex_unlock(&lm->mtx); |
| |
| return 0; |
| } |
| |
| /* Get configuration of the callback monitor and return whether it is enabled |
| * or disabled. |
| */ |
| static int fake_lm_get(struct vme_lm_resource *lm, |
| unsigned long long *lm_base, u32 *aspace, u32 *cycle) |
| { |
| struct fake_driver *bridge; |
| |
| bridge = lm->parent->driver_priv; |
| |
| mutex_lock(&lm->mtx); |
| |
| *lm_base = bridge->lm_base; |
| *aspace = bridge->lm_aspace; |
| *cycle = bridge->lm_cycle; |
| |
| mutex_unlock(&lm->mtx); |
| |
| return bridge->lm_enabled; |
| } |
| |
| /* |
| * Attach a callback to a specific location monitor. |
| * |
| * Callback will be passed the monitor triggered. |
| */ |
| static int fake_lm_attach(struct vme_lm_resource *lm, int monitor, |
| void (*callback)(void *), void *data) |
| { |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = lm->parent; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| mutex_lock(&lm->mtx); |
| |
| /* Ensure that the location monitor is configured - need PGM or DATA */ |
| if (bridge->lm_cycle == 0) { |
| mutex_unlock(&lm->mtx); |
| pr_err("Location monitor not properly configured\n"); |
| return -EINVAL; |
| } |
| |
| /* Check that a callback isn't already attached */ |
| if (bridge->lm_callback[monitor]) { |
| mutex_unlock(&lm->mtx); |
| pr_err("Existing callback attached\n"); |
| return -EBUSY; |
| } |
| |
| /* Attach callback */ |
| bridge->lm_callback[monitor] = callback; |
| bridge->lm_data[monitor] = data; |
| |
| /* Ensure that global Location Monitor Enable set */ |
| bridge->lm_enabled = 1; |
| |
| mutex_unlock(&lm->mtx); |
| |
| return 0; |
| } |
| |
| /* |
| * Detach a callback function forn a specific location monitor. |
| */ |
| static int fake_lm_detach(struct vme_lm_resource *lm, int monitor) |
| { |
| u32 tmp; |
| int i; |
| struct fake_driver *bridge; |
| |
| bridge = lm->parent->driver_priv; |
| |
| mutex_lock(&lm->mtx); |
| |
| /* Detach callback */ |
| bridge->lm_callback[monitor] = NULL; |
| bridge->lm_data[monitor] = NULL; |
| |
| /* If all location monitors disabled, disable global Location Monitor */ |
| tmp = 0; |
| for (i = 0; i < lm->monitors; i++) { |
| if (bridge->lm_callback[i]) |
| tmp = 1; |
| } |
| |
| if (tmp == 0) |
| bridge->lm_enabled = 0; |
| |
| mutex_unlock(&lm->mtx); |
| |
| return 0; |
| } |
| |
| /* |
| * Determine Geographical Addressing |
| */ |
| static int fake_slot_get(struct vme_bridge *fake_bridge) |
| { |
| return geoid; |
| } |
| |
| static void *fake_alloc_consistent(struct device *parent, size_t size, |
| dma_addr_t *dma) |
| { |
| void *alloc = kmalloc(size, GFP_KERNEL); |
| |
| if (alloc) |
| *dma = fake_ptr_to_pci(alloc); |
| |
| return alloc; |
| } |
| |
| static void fake_free_consistent(struct device *parent, size_t size, |
| void *vaddr, dma_addr_t dma) |
| { |
| kfree(vaddr); |
| /* |
| dma_free_coherent(parent, size, vaddr, dma); |
| */ |
| } |
| |
| /* |
| * Configure CR/CSR space |
| * |
| * Access to the CR/CSR can be configured at power-up. The location of the |
| * CR/CSR registers in the CR/CSR address space is determined by the boards |
| * Geographic address. |
| * |
| * Each board has a 512kB window, with the highest 4kB being used for the |
| * boards registers, this means there is a fix length 508kB window which must |
| * be mapped onto PCI memory. |
| */ |
| static int fake_crcsr_init(struct vme_bridge *fake_bridge) |
| { |
| u32 vstat; |
| struct fake_driver *bridge; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| /* Allocate mem for CR/CSR image */ |
| bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL); |
| bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel); |
| if (!bridge->crcsr_kernel) |
| return -ENOMEM; |
| |
| vstat = fake_slot_get(fake_bridge); |
| |
| pr_info("CR/CSR Offset: %d\n", vstat); |
| |
| return 0; |
| } |
| |
| static void fake_crcsr_exit(struct vme_bridge *fake_bridge) |
| { |
| struct fake_driver *bridge; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| kfree(bridge->crcsr_kernel); |
| } |
| |
| |
| static int __init fake_init(void) |
| { |
| int retval, i; |
| struct list_head *pos = NULL, *n; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *fake_device; |
| struct vme_master_resource *master_image; |
| struct vme_slave_resource *slave_image; |
| struct vme_lm_resource *lm; |
| |
| /* We need a fake parent device */ |
| vme_root = __root_device_register("vme", THIS_MODULE); |
| |
| /* If we want to support more than one bridge at some point, we need to |
| * dynamically allocate this so we get one per device. |
| */ |
| fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL); |
| if (!fake_bridge) { |
| retval = -ENOMEM; |
| goto err_struct; |
| } |
| |
| fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL); |
| if (!fake_device) { |
| retval = -ENOMEM; |
| goto err_driver; |
| } |
| |
| fake_bridge->driver_priv = fake_device; |
| |
| fake_bridge->parent = vme_root; |
| |
| fake_device->parent = fake_bridge; |
| |
| /* Initialize wait queues & mutual exclusion flags */ |
| mutex_init(&fake_device->vme_int); |
| mutex_init(&fake_bridge->irq_mtx); |
| tasklet_init(&fake_device->int_tasklet, fake_VIRQ_tasklet, |
| (unsigned long) fake_bridge); |
| |
| strcpy(fake_bridge->name, driver_name); |
| |
| /* Add master windows to list */ |
| INIT_LIST_HEAD(&fake_bridge->master_resources); |
| for (i = 0; i < FAKE_MAX_MASTER; i++) { |
| master_image = kmalloc(sizeof(*master_image), GFP_KERNEL); |
| if (!master_image) { |
| retval = -ENOMEM; |
| goto err_master; |
| } |
| master_image->parent = fake_bridge; |
| spin_lock_init(&master_image->lock); |
| master_image->locked = 0; |
| master_image->number = i; |
| master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | |
| VME_A64; |
| master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | |
| VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | |
| VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | |
| VME_PROG | VME_DATA; |
| master_image->width_attr = VME_D16 | VME_D32; |
| memset(&master_image->bus_resource, 0, |
| sizeof(struct resource)); |
| master_image->kern_base = NULL; |
| list_add_tail(&master_image->list, |
| &fake_bridge->master_resources); |
| } |
| |
| /* Add slave windows to list */ |
| INIT_LIST_HEAD(&fake_bridge->slave_resources); |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) { |
| slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL); |
| if (!slave_image) { |
| retval = -ENOMEM; |
| goto err_slave; |
| } |
| slave_image->parent = fake_bridge; |
| mutex_init(&slave_image->mtx); |
| slave_image->locked = 0; |
| slave_image->number = i; |
| slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | |
| VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | |
| VME_USER3 | VME_USER4; |
| slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | |
| VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | |
| VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | |
| VME_PROG | VME_DATA; |
| list_add_tail(&slave_image->list, |
| &fake_bridge->slave_resources); |
| } |
| |
| /* Add location monitor to list */ |
| INIT_LIST_HEAD(&fake_bridge->lm_resources); |
| lm = kmalloc(sizeof(*lm), GFP_KERNEL); |
| if (!lm) { |
| retval = -ENOMEM; |
| goto err_lm; |
| } |
| lm->parent = fake_bridge; |
| mutex_init(&lm->mtx); |
| lm->locked = 0; |
| lm->number = 1; |
| lm->monitors = 4; |
| list_add_tail(&lm->list, &fake_bridge->lm_resources); |
| |
| fake_bridge->slave_get = fake_slave_get; |
| fake_bridge->slave_set = fake_slave_set; |
| fake_bridge->master_get = fake_master_get; |
| fake_bridge->master_set = fake_master_set; |
| fake_bridge->master_read = fake_master_read; |
| fake_bridge->master_write = fake_master_write; |
| fake_bridge->master_rmw = fake_master_rmw; |
| fake_bridge->irq_set = fake_irq_set; |
| fake_bridge->irq_generate = fake_irq_generate; |
| fake_bridge->lm_set = fake_lm_set; |
| fake_bridge->lm_get = fake_lm_get; |
| fake_bridge->lm_attach = fake_lm_attach; |
| fake_bridge->lm_detach = fake_lm_detach; |
| fake_bridge->slot_get = fake_slot_get; |
| fake_bridge->alloc_consistent = fake_alloc_consistent; |
| fake_bridge->free_consistent = fake_free_consistent; |
| |
| pr_info("Board is%s the VME system controller\n", |
| (geoid == 1) ? "" : " not"); |
| |
| pr_info("VME geographical address is set to %d\n", geoid); |
| |
| retval = fake_crcsr_init(fake_bridge); |
| if (retval) { |
| pr_err("CR/CSR configuration failed.\n"); |
| goto err_crcsr; |
| } |
| |
| retval = vme_register_bridge(fake_bridge); |
| if (retval != 0) { |
| pr_err("Chip Registration failed.\n"); |
| goto err_reg; |
| } |
| |
| exit_pointer = fake_bridge; |
| |
| return 0; |
| |
| err_reg: |
| fake_crcsr_exit(fake_bridge); |
| err_crcsr: |
| err_lm: |
| /* resources are stored in link list */ |
| list_for_each_safe(pos, n, &fake_bridge->lm_resources) { |
| lm = list_entry(pos, struct vme_lm_resource, list); |
| list_del(pos); |
| kfree(lm); |
| } |
| err_slave: |
| /* resources are stored in link list */ |
| list_for_each_safe(pos, n, &fake_bridge->slave_resources) { |
| slave_image = list_entry(pos, struct vme_slave_resource, list); |
| list_del(pos); |
| kfree(slave_image); |
| } |
| err_master: |
| /* resources are stored in link list */ |
| list_for_each_safe(pos, n, &fake_bridge->master_resources) { |
| master_image = list_entry(pos, struct vme_master_resource, |
| list); |
| list_del(pos); |
| kfree(master_image); |
| } |
| |
| kfree(fake_device); |
| err_driver: |
| kfree(fake_bridge); |
| err_struct: |
| return retval; |
| |
| } |
| |
| |
| static void __exit fake_exit(void) |
| { |
| struct list_head *pos = NULL; |
| struct list_head *tmplist; |
| struct vme_master_resource *master_image; |
| struct vme_slave_resource *slave_image; |
| int i; |
| struct vme_bridge *fake_bridge; |
| struct fake_driver *bridge; |
| |
| fake_bridge = exit_pointer; |
| |
| bridge = fake_bridge->driver_priv; |
| |
| pr_debug("Driver is being unloaded.\n"); |
| |
| /* |
| * Shutdown all inbound and outbound windows. |
| */ |
| for (i = 0; i < FAKE_MAX_MASTER; i++) |
| bridge->masters[i].enabled = 0; |
| |
| for (i = 0; i < FAKE_MAX_SLAVE; i++) |
| bridge->slaves[i].enabled = 0; |
| |
| /* |
| * Shutdown Location monitor. |
| */ |
| bridge->lm_enabled = 0; |
| |
| vme_unregister_bridge(fake_bridge); |
| |
| fake_crcsr_exit(fake_bridge); |
| /* resources are stored in link list */ |
| list_for_each_safe(pos, tmplist, &fake_bridge->slave_resources) { |
| slave_image = list_entry(pos, struct vme_slave_resource, list); |
| list_del(pos); |
| kfree(slave_image); |
| } |
| |
| /* resources are stored in link list */ |
| list_for_each_safe(pos, tmplist, &fake_bridge->master_resources) { |
| master_image = list_entry(pos, struct vme_master_resource, |
| list); |
| list_del(pos); |
| kfree(master_image); |
| } |
| |
| kfree(fake_bridge->driver_priv); |
| |
| kfree(fake_bridge); |
| |
| root_device_unregister(vme_root); |
| } |
| |
| |
| MODULE_PARM_DESC(geoid, "Set geographical addressing"); |
| module_param(geoid, int, 0); |
| |
| MODULE_DESCRIPTION("Fake VME bridge driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(fake_init); |
| module_exit(fake_exit); |