Documentation/devicetree/bindings/media/mediatek-mipicsi.txt

* Mediatek MIPI-CSI2 receiver

Mediatek MIPI-CSI2 receiver is the MIPI Signal capture hardware present in Mediatek SoCs

Required properties:
- compatible: should be "mediatek,mt2712-mipicsi"
- reg : physical base address of the mipicsi receiver registers and length of
  memory mapped region.
- power-domains: a phandle to the power domain, see
  Documentation/devicetree/bindings/power/power_domain.txt for details.
- mediatek,larb: must contain the local arbiters in the current Socs, see
  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
  for details.
- iommus: should point to the respective IOMMU block with master port as
  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
  for details.
- mediatek,seninf_mux_camsv: seninf_mux_camsv the data go through of the mipicsi port
  any mipicsi port can contain max four seninf_mux_camsv
  The Total seninf_mux_camsv is six for mt2712
- mediatek,mipicsiid: the id of the mipicsi port, there are two port for mt2712
- mediatek,mipicsi: the common component of the two mipicsi port
- mediatek,mipicsi_max_vc: the number of virtual channel which subdev used
- mediatek,serdes_link_reg: the register of subdev to get the link status

Example:
	mipicsi0: mipicsi@10217000 {
		compatible = "mediatek,mt2712-mipicsi";
		mediatek,mipicsi = <&mipicsi>;
		iommus = <&iommu0 M4U_PORT_CAM_DMA0>,
			 <&iommu0 M4U_PORT_CAM_DMA1>;
		mediatek,larb = <&larb2>;
		power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;

		mediatek,seninf_mux_camsv = <&seninf1_mux_camsv0
					     &seninf2_mux_camsv1
					     &seninf3_mux_camsv2
					     &seninf4_mux_camsv3>;
		reg = <0 0x10217000 0 0x60>,
		      <0 0x15002100 0 0x4>,
		      <0 0x15002300 0 0x100>;
		mediatek,mipicsiid = <0>;
		mediatek,mipicsi_max_vc = <4>;
		mediatek,serdes_link_reg = <0x49>;
	};

	mipicsi1: mipicsi@10218000 {
		compatible = "mediatek,mt2712-mipicsi";
		mediatek,mipicsi = <&mipicsi>;
		iommus = <&iommu0 M4U_PORT_CAM_DMA2>;
		mediatek,larb = <&larb2>;
		power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
		mediatek,seninf_mux_camsv = <&seninf5_mux_camsv4
					     &seninf6_mux_camsv5>;
		reg = <0 0x10218000 0 0x60>,
		      <0 0x15002500 0 0x4>,
		      <0 0x15002700 0 0x100>;
		mediatek,mipicsiid = <1>;
	};