| Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) |
| |
| Required properties: |
| - compatible: "samsung,s6e63j0x03" |
| - reg: the virtual channel number of a DSI peripheral |
| - vdd3-supply: I/O voltage supply |
| - vci-supply: voltage supply for analog circuits |
| - reset-gpios: a GPIO spec for the reset pin (active low) |
| - te-gpios: a GPIO spec for the tearing effect synchronization signal |
| gpio pin (active high) |
| |
| Example: |
| &dsi { |
| ... |
| |
| panel@0 { |
| compatible = "samsung,s6e63j0x03"; |
| reg = <0>; |
| vdd3-supply = <&ldo16_reg>; |
| vci-supply = <&ldo20_reg>; |
| reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; |
| te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
