| /* |
| * drivers/media/i2c/smiapp/smiapp.h |
| * |
| * Generic driver for SMIA/SMIA++ compliant camera modules |
| * |
| * Copyright (C) 2010--2012 Nokia Corporation |
| * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __SMIAPP_PRIV_H_ |
| #define __SMIAPP_PRIV_H_ |
| |
| #include <linux/mutex.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-subdev.h> |
| #include <media/smiapp.h> |
| |
| #include "smiapp-pll.h" |
| #include "smiapp-reg.h" |
| #include "smiapp-regs.h" |
| #include "smiapp-quirk.h" |
| |
| /* |
| * Standard SMIA++ constants |
| */ |
| #define SMIA_VERSION_1 10 |
| #define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */ |
| #define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */ |
| #define SMIAPP_VERSION_1 10 |
| |
| #define SMIAPP_PROFILE_0 0 |
| #define SMIAPP_PROFILE_1 1 |
| #define SMIAPP_PROFILE_2 2 |
| |
| #define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */ |
| |
| #define SMIAPP_RESET_DELAY_CLOCKS 2400 |
| #define SMIAPP_RESET_DELAY(clk) \ |
| (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \ |
| + (clk) / 1000 - 1) / ((clk) / 1000)) |
| |
| #include "smiapp-limits.h" |
| |
| struct smiapp_quirk; |
| |
| #define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0) |
| |
| struct smiapp_module_ident { |
| u8 manufacturer_id; |
| u16 model_id; |
| u8 revision_number_major; |
| |
| u8 flags; |
| |
| char *name; |
| const struct smiapp_quirk *quirk; |
| }; |
| |
| struct smiapp_module_info { |
| u32 manufacturer_id; |
| u32 model_id; |
| u32 revision_number_major; |
| u32 revision_number_minor; |
| |
| u32 module_year; |
| u32 module_month; |
| u32 module_day; |
| |
| u32 sensor_manufacturer_id; |
| u32 sensor_model_id; |
| u32 sensor_revision_number; |
| u32 sensor_firmware_version; |
| |
| u32 smia_version; |
| u32 smiapp_version; |
| |
| u32 smiapp_profile; |
| |
| char *name; |
| const struct smiapp_quirk *quirk; |
| }; |
| |
| #define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \ |
| { .manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = fl, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \ |
| { .manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define SMIAPP_IDENT_L(manufacturer, model, rev, _name) \ |
| { .manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ |
| .name = _name, } |
| |
| #define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk) \ |
| { .manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = 0, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define SMIAPP_IDENT(manufacturer, model, rev, _name) \ |
| { .manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = 0, \ |
| .name = _name, } |
| |
| struct smiapp_reg_limits { |
| u32 addr; |
| char *what; |
| }; |
| |
| extern struct smiapp_reg_limits smiapp_reg_limits[]; |
| |
| struct smiapp_csi_data_format { |
| u32 code; |
| u8 width; |
| u8 compressed; |
| u8 pixel_order; |
| }; |
| |
| #define SMIAPP_SUBDEVS 3 |
| |
| #define SMIAPP_PA_PAD_SRC 0 |
| #define SMIAPP_PAD_SINK 0 |
| #define SMIAPP_PAD_SRC 1 |
| #define SMIAPP_PADS 2 |
| |
| struct smiapp_binning_subtype { |
| u8 horizontal:4; |
| u8 vertical:4; |
| } __packed; |
| |
| struct smiapp_subdev { |
| struct v4l2_subdev sd; |
| struct media_pad pads[2]; |
| struct v4l2_rect sink_fmt; |
| struct v4l2_rect crop[2]; |
| struct v4l2_rect compose; /* compose on sink */ |
| unsigned short sink_pad; |
| unsigned short source_pad; |
| int npads; |
| struct smiapp_sensor *sensor; |
| struct v4l2_ctrl_handler ctrl_handler; |
| }; |
| |
| /* |
| * struct smiapp_sensor - Main device structure |
| */ |
| struct smiapp_sensor { |
| /* |
| * "mutex" is used to serialise access to all fields here |
| * except v4l2_ctrls at the end of the struct. "mutex" is also |
| * used to serialise access to file handle specific |
| * information. The exception to this rule is the power_mutex |
| * below. |
| */ |
| struct mutex mutex; |
| /* |
| * power_mutex is used to serialise power management related |
| * activities. Acquiring "mutex" at that time isn't necessary |
| * since there are no other users anyway. |
| */ |
| struct mutex power_mutex; |
| struct smiapp_subdev ssds[SMIAPP_SUBDEVS]; |
| u32 ssds_used; |
| struct smiapp_subdev *src; |
| struct smiapp_subdev *binner; |
| struct smiapp_subdev *scaler; |
| struct smiapp_subdev *pixel_array; |
| struct smiapp_platform_data *platform_data; |
| struct regulator *vana; |
| struct clk *ext_clk; |
| u32 limits[SMIAPP_LIMIT_LAST]; |
| u8 nbinning_subtypes; |
| struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES]; |
| u32 mbus_frame_fmts; |
| const struct smiapp_csi_data_format *csi_format; |
| const struct smiapp_csi_data_format *internal_csi_format; |
| u32 default_mbus_frame_fmts; |
| int default_pixel_order; |
| |
| u8 binning_horizontal; |
| u8 binning_vertical; |
| |
| u8 scale_m; |
| u8 scaling_mode; |
| |
| u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */ |
| u8 flash_capability; |
| u8 frame_skip; |
| |
| int power_count; |
| |
| bool streaming; |
| bool dev_init_done; |
| |
| u8 *nvm; /* nvm memory buffer */ |
| unsigned int nvm_size; /* bytes */ |
| |
| struct smiapp_module_info minfo; |
| |
| struct smiapp_pll pll; |
| |
| /* Pixel array controls */ |
| struct v4l2_ctrl *analog_gain; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *hflip; |
| struct v4l2_ctrl *vflip; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *pixel_rate_parray; |
| /* src controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate_csi; |
| }; |
| |
| #define to_smiapp_subdev(_sd) \ |
| container_of(_sd, struct smiapp_subdev, sd) |
| |
| #define to_smiapp_sensor(_sd) \ |
| (to_smiapp_subdev(_sd)->sensor) |
| |
| #endif /* __SMIAPP_PRIV_H_ */ |