|  | /* | 
|  | * Some parts based on code from net80211 | 
|  | * Copyright (c) 2001 Atsushi Onoe | 
|  | * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. The name of the author may not be used to endorse or promote products | 
|  | *    derived from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | 
|  | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
|  | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
|  | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
|  | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include "ieee80211softmac_priv.h" | 
|  |  | 
|  | /* Helper functions for inserting data into the frames */ | 
|  |  | 
|  | /* | 
|  | * Adds an ESSID element to the frame | 
|  | * | 
|  | */ | 
|  | static u8 * | 
|  | ieee80211softmac_add_essid(u8 *dst, struct ieee80211softmac_essid *essid) | 
|  | { | 
|  | if (essid) { | 
|  | *dst++ = MFIE_TYPE_SSID; | 
|  | *dst++ = essid->len; | 
|  | memcpy(dst, essid->data, essid->len); | 
|  | return dst+essid->len; | 
|  | } else { | 
|  | *dst++ = MFIE_TYPE_SSID; | 
|  | *dst++ = 0; | 
|  | return dst; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Adds Supported Rates and if required Extended Rates Information Element | 
|  | * to the frame, ASSUMES WE HAVE A SORTED LIST OF RATES */ | 
|  | static u8 * | 
|  | ieee80211softmac_frame_add_rates(u8 *dst, const struct ieee80211softmac_ratesinfo *r) | 
|  | { | 
|  | int cck_len, ofdm_len; | 
|  | *dst++ = MFIE_TYPE_RATES; | 
|  |  | 
|  | for(cck_len=0; ieee80211_is_cck_rate(r->rates[cck_len]) && (cck_len < r->count);cck_len++); | 
|  |  | 
|  | if(cck_len > IEEE80211SOFTMAC_MAX_RATES_LEN) | 
|  | cck_len = IEEE80211SOFTMAC_MAX_RATES_LEN; | 
|  | *dst++ = cck_len; | 
|  | memcpy(dst, r->rates, cck_len); | 
|  | dst += cck_len; | 
|  |  | 
|  | if(cck_len < r->count){ | 
|  | for (ofdm_len=0; ieee80211_is_ofdm_rate(r->rates[ofdm_len + cck_len]) && (ofdm_len + cck_len < r->count); ofdm_len++); | 
|  | if (ofdm_len > 0) { | 
|  | if (ofdm_len > IEEE80211SOFTMAC_MAX_EX_RATES_LEN) | 
|  | ofdm_len = IEEE80211SOFTMAC_MAX_EX_RATES_LEN; | 
|  | *dst++ = MFIE_TYPE_RATES_EX; | 
|  | *dst++ = ofdm_len; | 
|  | memcpy(dst, r->rates + cck_len, ofdm_len); | 
|  | dst += ofdm_len; | 
|  | } | 
|  | } | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | /* Allocate a management frame */ | 
|  | static u8 * | 
|  | ieee80211softmac_alloc_mgt(u32 size) | 
|  | { | 
|  | u8 * data; | 
|  |  | 
|  | /* Add the header and FCS to the size */ | 
|  | size = size + IEEE80211_3ADDR_LEN; | 
|  | if(size > IEEE80211_DATA_LEN) | 
|  | return NULL; | 
|  | /* Allocate the frame */ | 
|  | data = kzalloc(size, GFP_ATOMIC); | 
|  | return data; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add a 2 Address Header | 
|  | */ | 
|  | static void | 
|  | ieee80211softmac_hdr_2addr(struct ieee80211softmac_device *mac, | 
|  | struct ieee80211_hdr_2addr *header, u32 type, u8 *dest) | 
|  | { | 
|  | /* Fill in the frame control flags */ | 
|  | header->frame_ctl = cpu_to_le16(type); | 
|  | /* Control packets always have WEP turned off */ | 
|  | if(type > IEEE80211_STYPE_CFENDACK && type < IEEE80211_STYPE_PSPOLL) | 
|  | header->frame_ctl |= mac->ieee->sec.level ? cpu_to_le16(IEEE80211_FCTL_PROTECTED) : 0; | 
|  |  | 
|  | /* Fill in the duration */ | 
|  | header->duration_id = 0; | 
|  | /* FIXME: How do I find this? | 
|  | * calculate. But most drivers just fill in 0 (except if it's a station id of course) */ | 
|  |  | 
|  | /* Fill in the Destination Address */ | 
|  | if(dest == NULL) | 
|  | memset(header->addr1, 0xFF, ETH_ALEN); | 
|  | else | 
|  | memcpy(header->addr1, dest, ETH_ALEN); | 
|  | /* Fill in the Source Address */ | 
|  | memcpy(header->addr2, mac->ieee->dev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Add a 3 Address Header */ | 
|  | static void | 
|  | ieee80211softmac_hdr_3addr(struct ieee80211softmac_device *mac, | 
|  | struct ieee80211_hdr_3addr *header, u32 type, u8 *dest, u8 *bssid) | 
|  | { | 
|  | /* This is common with 2addr, so use that instead */ | 
|  | ieee80211softmac_hdr_2addr(mac, (struct ieee80211_hdr_2addr *)header, type, dest); | 
|  |  | 
|  | /* Fill in the BSS ID */ | 
|  | if(bssid == NULL) | 
|  | memset(header->addr3, 0xFF, ETH_ALEN); | 
|  | else | 
|  | memcpy(header->addr3, bssid, ETH_ALEN); | 
|  |  | 
|  | /* Fill in the sequence # */ | 
|  | /* FIXME: I need to add this to the softmac struct | 
|  | * shouldn't the sequence number be in ieee80211? */ | 
|  | } | 
|  |  | 
|  | static u16 | 
|  | ieee80211softmac_capabilities(struct ieee80211softmac_device *mac, | 
|  | struct ieee80211softmac_network *net) | 
|  | { | 
|  | u16 capability = 0; | 
|  |  | 
|  | /* ESS and IBSS bits are set according to the current mode */ | 
|  | switch (mac->ieee->iw_mode) { | 
|  | case IW_MODE_INFRA: | 
|  | capability = cpu_to_le16(WLAN_CAPABILITY_ESS); | 
|  | break; | 
|  | case IW_MODE_ADHOC: | 
|  | capability = cpu_to_le16(WLAN_CAPABILITY_IBSS); | 
|  | break; | 
|  | case IW_MODE_AUTO: | 
|  | capability = net->capabilities & | 
|  | (WLAN_CAPABILITY_ESS|WLAN_CAPABILITY_IBSS); | 
|  | break; | 
|  | default: | 
|  | /* bleh. we don't ever go to these modes */ | 
|  | printk(KERN_ERR PFX "invalid iw_mode!\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* CF Pollable / CF Poll Request */ | 
|  | /* Needs to be implemented, for now, the 0's == not supported */ | 
|  |  | 
|  | /* Privacy Bit */ | 
|  | capability |= mac->ieee->sec.level ? | 
|  | cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0; | 
|  |  | 
|  | /* Short Preamble */ | 
|  | /* Always supported: we probably won't ever be powering devices which | 
|  | * dont support this... */ | 
|  | capability |= WLAN_CAPABILITY_SHORT_PREAMBLE; | 
|  |  | 
|  | /* PBCC */ | 
|  | /* Not widely used */ | 
|  |  | 
|  | /* Channel Agility */ | 
|  | /* Not widely used */ | 
|  |  | 
|  | /* Short Slot */ | 
|  | /* Will be implemented later */ | 
|  |  | 
|  | /* DSSS-OFDM */ | 
|  | /* Not widely used */ | 
|  |  | 
|  | return capability; | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Create Management packets | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /* Creates an association request packet */ | 
|  | static u32 | 
|  | ieee80211softmac_assoc_req(struct ieee80211_assoc_request **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) | 
|  | { | 
|  | u8 *data; | 
|  | (*pkt) = (struct ieee80211_assoc_request *)ieee80211softmac_alloc_mgt( | 
|  | 2 +		/* Capability Info */ | 
|  | 2 +	 	/* Listen Interval */ | 
|  | /* SSID IE */ | 
|  | 1 + 1 + IW_ESSID_MAX_SIZE + | 
|  | /* Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + | 
|  | /* Extended Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN + | 
|  | /* WPA IE if present */ | 
|  | mac->wpa.IElen | 
|  | /* Other IE's?  Optional? | 
|  | * Yeah, probably need an extra IE parameter -- lots of vendors like to | 
|  | * fill in their own IEs */ | 
|  | ); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_ASSOC_REQ, net->bssid, net->bssid); | 
|  |  | 
|  | /* Fill in the capabilities */ | 
|  | (*pkt)->capability = ieee80211softmac_capabilities(mac, net); | 
|  |  | 
|  | /* Fill in Listen Interval (?) */ | 
|  | (*pkt)->listen_interval = cpu_to_le16(10); | 
|  |  | 
|  | data = (u8 *)(*pkt)->info_element; | 
|  | /* Add SSID */ | 
|  | data = ieee80211softmac_add_essid(data, &net->essid); | 
|  | /* Add Rates */ | 
|  | data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); | 
|  | /* Add WPA IE */ | 
|  | if (mac->wpa.IElen && mac->wpa.IE) { | 
|  | memcpy(data, mac->wpa.IE, mac->wpa.IElen); | 
|  | data += mac->wpa.IElen; | 
|  | } | 
|  | /* Return the number of used bytes */ | 
|  | return (data - (u8*)(*pkt)); | 
|  | } | 
|  |  | 
|  | /* Create a reassociation request packet */ | 
|  | static u32 | 
|  | ieee80211softmac_reassoc_req(struct ieee80211_reassoc_request **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) | 
|  | { | 
|  | u8 *data; | 
|  | (*pkt) = (struct ieee80211_reassoc_request *)ieee80211softmac_alloc_mgt( | 
|  | 2 +		/* Capability Info */ | 
|  | 2 +	 	/* Listen Interval */ | 
|  | ETH_ALEN +	/* AP MAC */ | 
|  | /* SSID IE */ | 
|  | 1 + 1 + IW_ESSID_MAX_SIZE + | 
|  | /* Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + | 
|  | /* Extended Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN | 
|  | /* Other IE's? */ | 
|  | ); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_REASSOC_REQ, net->bssid, net->bssid); | 
|  |  | 
|  | /* Fill in the capabilities */ | 
|  | (*pkt)->capability = ieee80211softmac_capabilities(mac, net); | 
|  |  | 
|  | /* Fill in Listen Interval (?) */ | 
|  | (*pkt)->listen_interval = cpu_to_le16(10); | 
|  | /* Fill in the current AP MAC */ | 
|  | memcpy((*pkt)->current_ap, mac->ieee->bssid, ETH_ALEN); | 
|  |  | 
|  | data = (u8 *)(*pkt)->info_element; | 
|  | /* Add SSID */ | 
|  | data = ieee80211softmac_add_essid(data, &net->essid); | 
|  | /* Add Rates */ | 
|  | data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); | 
|  | /* Return packet size */ | 
|  | return (data - (u8 *)(*pkt)); | 
|  | } | 
|  |  | 
|  | /* Create an authentication packet */ | 
|  | static u32 | 
|  | ieee80211softmac_auth(struct ieee80211_auth **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net, | 
|  | u16 transaction, u16 status, int *encrypt_mpdu) | 
|  | { | 
|  | u8 *data; | 
|  | int auth_mode = mac->ieee->sec.auth_mode; | 
|  | int is_shared_response = (auth_mode == WLAN_AUTH_SHARED_KEY | 
|  | && transaction == IEEE80211SOFTMAC_AUTH_SHARED_RESPONSE); | 
|  |  | 
|  | /* Allocate Packet */ | 
|  | (*pkt) = (struct ieee80211_auth *)ieee80211softmac_alloc_mgt( | 
|  | 2 +		/* Auth Algorithm */ | 
|  | 2 +		/* Auth Transaction Seq */ | 
|  | 2 +		/* Status Code */ | 
|  | /* Challenge Text IE */ | 
|  | (is_shared_response ? 1 + 1 + net->challenge_len : 0) | 
|  | ); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_AUTH, net->bssid, net->bssid); | 
|  |  | 
|  | /* Algorithm */ | 
|  | (*pkt)->algorithm = cpu_to_le16(auth_mode); | 
|  | /* Transaction */ | 
|  | (*pkt)->transaction = cpu_to_le16(transaction); | 
|  | /* Status */ | 
|  | (*pkt)->status = cpu_to_le16(status); | 
|  |  | 
|  | data = (u8 *)(*pkt)->info_element; | 
|  | /* Challenge Text */ | 
|  | if (is_shared_response) { | 
|  | *data = MFIE_TYPE_CHALLENGE; | 
|  | data++; | 
|  |  | 
|  | /* Copy the challenge in */ | 
|  | *data = net->challenge_len; | 
|  | data++; | 
|  | memcpy(data, net->challenge, net->challenge_len); | 
|  | data += net->challenge_len; | 
|  |  | 
|  | /* Make sure this frame gets encrypted with the shared key */ | 
|  | *encrypt_mpdu = 1; | 
|  | } else | 
|  | *encrypt_mpdu = 0; | 
|  |  | 
|  | /* Return the packet size */ | 
|  | return (data - (u8 *)(*pkt)); | 
|  | } | 
|  |  | 
|  | /* Create a disassocation or deauthentication packet */ | 
|  | static u32 | 
|  | ieee80211softmac_disassoc_deauth(struct ieee80211_disassoc **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net, | 
|  | u16 type, u16 reason) | 
|  | { | 
|  | /* Allocate Packet */ | 
|  | (*pkt) = (struct ieee80211_disassoc *)ieee80211softmac_alloc_mgt(2); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), type, net->bssid, net->bssid); | 
|  | /* Reason */ | 
|  | (*pkt)->reason = cpu_to_le16(reason); | 
|  | /* Return the packet size */ | 
|  | return (2 + IEEE80211_3ADDR_LEN); | 
|  | } | 
|  |  | 
|  | /* Create a probe request packet */ | 
|  | static u32 | 
|  | ieee80211softmac_probe_req(struct ieee80211_probe_request **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_essid *essid) | 
|  | { | 
|  | u8 *data; | 
|  | /* Allocate Packet */ | 
|  | (*pkt) = (struct ieee80211_probe_request *)ieee80211softmac_alloc_mgt( | 
|  | /* SSID of requested network */ | 
|  | 1 + 1 + IW_ESSID_MAX_SIZE + | 
|  | /* Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + | 
|  | /* Extended Rates IE */ | 
|  | 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN | 
|  | ); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_PROBE_REQ, NULL, NULL); | 
|  |  | 
|  | data = (u8 *)(*pkt)->info_element; | 
|  | /* Add ESSID (can be NULL) */ | 
|  | data = ieee80211softmac_add_essid(data, essid); | 
|  | /* Add Rates */ | 
|  | data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); | 
|  | /* Return packet size */ | 
|  | return (data - (u8 *)(*pkt)); | 
|  | } | 
|  |  | 
|  | /* Create a probe response packet */ | 
|  | /* FIXME: Not complete */ | 
|  | static u32 | 
|  | ieee80211softmac_probe_resp(struct ieee80211_probe_response **pkt, | 
|  | struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) | 
|  | { | 
|  | u8 *data; | 
|  | /* Allocate Packet */ | 
|  | (*pkt) = (struct ieee80211_probe_response *)ieee80211softmac_alloc_mgt( | 
|  | 8 +		/* Timestamp */ | 
|  | 2 +		/* Beacon Interval */ | 
|  | 2 +		/* Capability Info */ | 
|  | /* SSID IE */ | 
|  | 1 + 1 + IW_ESSID_MAX_SIZE + | 
|  | 7 + 		/* FH Parameter Set */ | 
|  | 2 +		/* DS Parameter Set */ | 
|  | 8 +		/* CF Parameter Set */ | 
|  | 4 		/* IBSS Parameter Set */ | 
|  | ); | 
|  | if (unlikely((*pkt) == NULL)) | 
|  | return 0; | 
|  | ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_PROBE_RESP, net->bssid, net->bssid); | 
|  | data = (u8 *)(*pkt)->info_element; | 
|  |  | 
|  | /* Return the packet size */ | 
|  | return (data - (u8 *)(*pkt)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Sends a manangement packet | 
|  | * FIXME: document the use of the arg parameter | 
|  | * for _AUTH: (transaction #) | (status << 16) | 
|  | */ | 
|  | int | 
|  | ieee80211softmac_send_mgt_frame(struct ieee80211softmac_device *mac, | 
|  | void *ptrarg, u32 type, u32 arg) | 
|  | { | 
|  | void *pkt = NULL; | 
|  | u32 pkt_size = 0; | 
|  | int encrypt_mpdu = 0; | 
|  |  | 
|  | switch(type) { | 
|  | case IEEE80211_STYPE_ASSOC_REQ: | 
|  | pkt_size = ieee80211softmac_assoc_req((struct ieee80211_assoc_request **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); | 
|  | break; | 
|  | case IEEE80211_STYPE_REASSOC_REQ: | 
|  | pkt_size = ieee80211softmac_reassoc_req((struct ieee80211_reassoc_request **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); | 
|  | break; | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | pkt_size = ieee80211softmac_auth((struct ieee80211_auth **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, (u16)(arg & 0xFFFF), (u16) (arg >> 16), &encrypt_mpdu); | 
|  | break; | 
|  | case IEEE80211_STYPE_DISASSOC: | 
|  | case IEEE80211_STYPE_DEAUTH: | 
|  | pkt_size = ieee80211softmac_disassoc_deauth((struct ieee80211_disassoc **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, type, (u16)(arg & 0xFFFF)); | 
|  | break; | 
|  | case IEEE80211_STYPE_PROBE_REQ: | 
|  | pkt_size = ieee80211softmac_probe_req((struct ieee80211_probe_request **)(&pkt), mac, (struct ieee80211softmac_essid *)ptrarg); | 
|  | break; | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | pkt_size = ieee80211softmac_probe_resp((struct ieee80211_probe_response **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); | 
|  | break; | 
|  | default: | 
|  | printkl(KERN_DEBUG PFX "Unsupported Management Frame type: %i\n", type); | 
|  | return -EINVAL; | 
|  | }; | 
|  |  | 
|  | if(pkt_size == 0 || pkt == NULL) { | 
|  | printkl(KERN_DEBUG PFX "Error, packet is nonexistant or 0 length\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Send the packet to the ieee80211 layer for tx */ | 
|  | /* we defined softmac->mgmt_xmit for this. Should we keep it | 
|  | * as it is (that means we'd need to wrap this into a txb), | 
|  | * modify the prototype (so it matches this function), | 
|  | * or get rid of it alltogether? | 
|  | * Does this work for you now? | 
|  | */ | 
|  | ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *)pkt, | 
|  | IEEE80211_3ADDR_LEN, pkt_size, encrypt_mpdu); | 
|  |  | 
|  | kfree(pkt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Beacon handling */ | 
|  | int ieee80211softmac_handle_beacon(struct net_device *dev, | 
|  | struct ieee80211_beacon *beacon, | 
|  | struct ieee80211_network *network) | 
|  | { | 
|  | struct ieee80211softmac_device *mac = ieee80211_priv(dev); | 
|  |  | 
|  | /* This might race, but we don't really care and it's not worth | 
|  | * adding heavyweight locking in this fastpath. | 
|  | */ | 
|  | if (mac->associnfo.associated) { | 
|  | if (memcmp(network->bssid, mac->associnfo.bssid, ETH_ALEN) == 0) | 
|  | ieee80211softmac_process_erp(mac, network->erp_value); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  |