| /* |
| * Copyright (C) 2003 - 2006 NetXen, Inc. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE. |
| * |
| * Contact Information: |
| * info@netxen.com |
| * NetXen, |
| * 3965 Freedom Circle, Fourth floor, |
| * Santa Clara, CA 95054 |
| * |
| * |
| * Provides access to the Network Interface Unit h/w block. |
| * |
| */ |
| |
| #include "netxen_nic.h" |
| |
| #define NETXEN_GB_MAC_SOFT_RESET 0x80000000 |
| #define NETXEN_GB_MAC_RESET_PROT_BLK 0x000F0000 |
| #define NETXEN_GB_MAC_ENABLE_TX_RX 0x00000005 |
| #define NETXEN_GB_MAC_PAUSED_FRMS 0x00000020 |
| |
| static long phy_lock_timeout = 100000000; |
| |
| static int phy_lock(struct netxen_adapter *adapter) |
| { |
| int i; |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| done = |
| readl(pci_base_offset |
| (adapter, NETXEN_PCIE_REG(PCIE_SEM3_LOCK))); |
| if (done == 1) |
| break; |
| if (timeout >= phy_lock_timeout) { |
| return -1; |
| } |
| timeout++; |
| if (!in_atomic()) |
| schedule(); |
| else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); |
| } |
| } |
| |
| writel(PHY_LOCK_DRIVER, |
| NETXEN_CRB_NORMALIZE(adapter, NETXEN_PHY_LOCK_ID)); |
| return 0; |
| } |
| |
| static int phy_unlock(struct netxen_adapter *adapter) |
| { |
| readl(pci_base_offset(adapter, NETXEN_PCIE_REG(PCIE_SEM3_UNLOCK))); |
| |
| return 0; |
| } |
| |
| /* |
| * netxen_niu_gbe_phy_read - read a register from the GbE PHY via |
| * mii management interface. |
| * |
| * Note: The MII management interface goes through port 0. |
| * Individual phys are addressed as follows: |
| * @param phy [15:8] phy id |
| * @param reg [7:0] register number |
| * |
| * @returns 0 on success |
| * -1 on error |
| * |
| */ |
| int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg, |
| __u32 * readval) |
| { |
| long timeout = 0; |
| long result = 0; |
| long restore = 0; |
| long phy = adapter->physical_port; |
| __u32 address; |
| __u32 command; |
| __u32 status; |
| __u32 mac_cfg0; |
| |
| if (phy_lock(adapter) != 0) { |
| return -1; |
| } |
| |
| /* |
| * MII mgmt all goes through port 0 MAC interface, |
| * so it cannot be in reset |
| */ |
| |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &mac_cfg0, 4)) |
| return -EIO; |
| if (netxen_gb_get_soft_reset(mac_cfg0)) { |
| __u32 temp; |
| temp = 0; |
| netxen_gb_tx_reset_pb(temp); |
| netxen_gb_rx_reset_pb(temp); |
| netxen_gb_tx_reset_mac(temp); |
| netxen_gb_rx_reset_mac(temp); |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &temp, 4)) |
| return -EIO; |
| restore = 1; |
| } |
| |
| address = 0; |
| netxen_gb_mii_mgmt_reg_addr(address, reg); |
| netxen_gb_mii_mgmt_phy_addr(address, phy); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), |
| &address, 4)) |
| return -EIO; |
| command = 0; /* turn off any prior activity */ |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), |
| &command, 4)) |
| return -EIO; |
| /* send read command */ |
| netxen_gb_mii_mgmt_set_read_cycle(command); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), |
| &command, 4)) |
| return -EIO; |
| |
| status = 0; |
| do { |
| if (netxen_nic_hw_read_wx(adapter, |
| NETXEN_NIU_GB_MII_MGMT_INDICATE(0), |
| &status, 4)) |
| return -EIO; |
| timeout++; |
| } while ((netxen_get_gb_mii_mgmt_busy(status) |
| || netxen_get_gb_mii_mgmt_notvalid(status)) |
| && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); |
| |
| if (timeout < NETXEN_NIU_PHY_WAITMAX) { |
| if (netxen_nic_hw_read_wx(adapter, |
| NETXEN_NIU_GB_MII_MGMT_STATUS(0), |
| readval, 4)) |
| return -EIO; |
| result = 0; |
| } else |
| result = -1; |
| |
| if (restore) |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &mac_cfg0, 4)) |
| return -EIO; |
| phy_unlock(adapter); |
| return result; |
| } |
| |
| /* |
| * netxen_niu_gbe_phy_write - write a register to the GbE PHY via |
| * mii management interface. |
| * |
| * Note: The MII management interface goes through port 0. |
| * Individual phys are addressed as follows: |
| * @param phy [15:8] phy id |
| * @param reg [7:0] register number |
| * |
| * @returns 0 on success |
| * -1 on error |
| * |
| */ |
| int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg, |
| __u32 val) |
| { |
| long timeout = 0; |
| long result = 0; |
| long restore = 0; |
| long phy = adapter->physical_port; |
| __u32 address; |
| __u32 command; |
| __u32 status; |
| __u32 mac_cfg0; |
| |
| /* |
| * MII mgmt all goes through port 0 MAC interface, so it |
| * cannot be in reset |
| */ |
| |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &mac_cfg0, 4)) |
| return -EIO; |
| if (netxen_gb_get_soft_reset(mac_cfg0)) { |
| __u32 temp; |
| temp = 0; |
| netxen_gb_tx_reset_pb(temp); |
| netxen_gb_rx_reset_pb(temp); |
| netxen_gb_tx_reset_mac(temp); |
| netxen_gb_rx_reset_mac(temp); |
| |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &temp, 4)) |
| return -EIO; |
| restore = 1; |
| } |
| |
| command = 0; /* turn off any prior activity */ |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), |
| &command, 4)) |
| return -EIO; |
| |
| address = 0; |
| netxen_gb_mii_mgmt_reg_addr(address, reg); |
| netxen_gb_mii_mgmt_phy_addr(address, phy); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), |
| &address, 4)) |
| return -EIO; |
| |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), |
| &val, 4)) |
| return -EIO; |
| |
| status = 0; |
| do { |
| if (netxen_nic_hw_read_wx(adapter, |
| NETXEN_NIU_GB_MII_MGMT_INDICATE(0), |
| &status, 4)) |
| return -EIO; |
| timeout++; |
| } while ((netxen_get_gb_mii_mgmt_busy(status)) |
| && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); |
| |
| if (timeout < NETXEN_NIU_PHY_WAITMAX) |
| result = 0; |
| else |
| result = -EIO; |
| |
| /* restore the state of port 0 MAC in case we tampered with it */ |
| if (restore) |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(0), |
| &mac_cfg0, 4)) |
| return -EIO; |
| |
| return result; |
| } |
| |
| int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x3f); |
| return 0; |
| } |
| |
| int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| int result = 0; |
| __u32 enable = 0; |
| netxen_set_phy_int_link_status_changed(enable); |
| netxen_set_phy_int_autoneg_completed(enable); |
| netxen_set_phy_int_speed_changed(enable); |
| |
| if (0 != |
| netxen_niu_gbe_phy_write(adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, |
| enable)) |
| result = -EIO; |
| |
| return result; |
| } |
| |
| int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x7f); |
| return 0; |
| } |
| |
| int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| int result = 0; |
| if (0 != |
| netxen_niu_gbe_phy_write(adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, 0)) |
| result = -EIO; |
| |
| return result; |
| } |
| |
| #if 0 |
| int netxen_niu_xgbe_clear_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_ACTIVE_INT, -1); |
| return 0; |
| } |
| #endif /* 0 */ |
| |
| static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter) |
| { |
| int result = 0; |
| if (0 != |
| netxen_niu_gbe_phy_write(adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, |
| -EIO)) |
| result = -EIO; |
| |
| return result; |
| } |
| |
| /* |
| * netxen_niu_gbe_set_mii_mode- Set 10/100 Mbit Mode for GbE MAC |
| * |
| */ |
| static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter, |
| int port, long enable) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x80000000); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x0000f0025); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), |
| 0xf1ff); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB0_MII_MODE + (port << 3), 1); |
| netxen_crb_writelit_adapter(adapter, |
| (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7); |
| |
| if (enable) { |
| /* |
| * Do NOT enable flow control until a suitable solution for |
| * shutting down pause frames is found. |
| */ |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x5); |
| } |
| |
| if (netxen_niu_gbe_enable_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n"); |
| if (netxen_niu_gbe_clear_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n"); |
| } |
| |
| /* |
| * netxen_niu_gbe_set_gmii_mode- Set GbE Mode for GbE MAC |
| */ |
| static void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter, |
| int port, long enable) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x80000000); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x0000f0025); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), |
| 0xf2ff); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB0_MII_MODE + (port << 3), 0); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1); |
| netxen_crb_writelit_adapter(adapter, |
| (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7); |
| |
| if (enable) { |
| /* |
| * Do NOT enable flow control until a suitable solution for |
| * shutting down pause frames is found. |
| */ |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| 0x5); |
| } |
| |
| if (netxen_niu_gbe_enable_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n"); |
| if (netxen_niu_gbe_clear_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n"); |
| } |
| |
| int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port) |
| { |
| int result = 0; |
| __u32 status; |
| if (adapter->disable_phy_interrupts) |
| adapter->disable_phy_interrupts(adapter); |
| mdelay(2); |
| |
| if (0 == |
| netxen_niu_gbe_phy_read(adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, |
| &status)) { |
| if (netxen_get_phy_link(status)) { |
| if (netxen_get_phy_speed(status) == 2) { |
| netxen_niu_gbe_set_gmii_mode(adapter, port, 1); |
| } else if ((netxen_get_phy_speed(status) == 1) |
| || (netxen_get_phy_speed(status) == 0)) { |
| netxen_niu_gbe_set_mii_mode(adapter, port, 1); |
| } else { |
| result = -1; |
| } |
| |
| } else { |
| /* |
| * We don't have link. Cable must be unconnected. |
| * Enable phy interrupts so we take action when |
| * plugged in. |
| */ |
| |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0 |
| (port), |
| NETXEN_GB_MAC_SOFT_RESET); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_0 |
| (port), |
| NETXEN_GB_MAC_RESET_PROT_BLK |
| | NETXEN_GB_MAC_ENABLE_TX_RX |
| | |
| NETXEN_GB_MAC_PAUSED_FRMS); |
| if (netxen_niu_gbe_clear_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX |
| "ERROR clearing PHY interrupts\n"); |
| if (netxen_niu_gbe_enable_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX |
| "ERROR enabling PHY interrupts\n"); |
| if (netxen_niu_gbe_clear_phy_interrupts(adapter)) |
| printk(KERN_ERR PFX |
| "ERROR clearing PHY interrupts\n"); |
| result = -1; |
| } |
| } else { |
| result = -EIO; |
| } |
| return result; |
| } |
| |
| int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) |
| { |
| u32 portnum = adapter->physical_port; |
| |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_XGE_CONFIG_0+(0x10000*portnum), 0x5); |
| |
| return 0; |
| } |
| |
| #if 0 |
| /* |
| * netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts |
| * @param enable 0 means don't enable the port |
| * 1 means enable (or re-enable) the port |
| */ |
| int netxen_niu_gbe_handle_phy_interrupt(struct netxen_adapter *adapter, |
| int port, long enable) |
| { |
| int result = 0; |
| __u32 int_src; |
| |
| printk(KERN_INFO PFX "NETXEN: Handling PHY interrupt on port %d" |
| " (device enable = %d)\n", (int)port, (int)enable); |
| |
| /* |
| * The read of the PHY INT status will clear the pending |
| * interrupt status |
| */ |
| if (netxen_niu_gbe_phy_read(adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, |
| &int_src) != 0) |
| result = -EINVAL; |
| else { |
| printk(KERN_INFO PFX "PHY Interrupt source = 0x%x \n", int_src); |
| if (netxen_get_phy_int_jabber(int_src)) |
| printk(KERN_INFO PFX "jabber Interrupt "); |
| if (netxen_get_phy_int_polarity_changed(int_src)) |
| printk(KERN_INFO PFX "polarity changed "); |
| if (netxen_get_phy_int_energy_detect(int_src)) |
| printk(KERN_INFO PFX "energy detect \n"); |
| if (netxen_get_phy_int_downshift(int_src)) |
| printk(KERN_INFO PFX "downshift \n"); |
| if (netxen_get_phy_int_mdi_xover_changed(int_src)) |
| printk(KERN_INFO PFX "mdi_xover_changed "); |
| if (netxen_get_phy_int_fifo_over_underflow(int_src)) |
| printk(KERN_INFO PFX "fifo_over_underflow "); |
| if (netxen_get_phy_int_false_carrier(int_src)) |
| printk(KERN_INFO PFX "false_carrier "); |
| if (netxen_get_phy_int_symbol_error(int_src)) |
| printk(KERN_INFO PFX "symbol_error "); |
| if (netxen_get_phy_int_autoneg_completed(int_src)) |
| printk(KERN_INFO PFX "autoneg_completed "); |
| if (netxen_get_phy_int_page_received(int_src)) |
| printk(KERN_INFO PFX "page_received "); |
| if (netxen_get_phy_int_duplex_changed(int_src)) |
| printk(KERN_INFO PFX "duplex_changed "); |
| if (netxen_get_phy_int_autoneg_error(int_src)) |
| printk(KERN_INFO PFX "autoneg_error "); |
| if ((netxen_get_phy_int_speed_changed(int_src)) |
| || (netxen_get_phy_int_link_status_changed(int_src))) { |
| __u32 status; |
| |
| printk(KERN_INFO PFX |
| "speed_changed or link status changed"); |
| if (netxen_niu_gbe_phy_read |
| (adapter, |
| NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, |
| &status) == 0) { |
| if (netxen_get_phy_speed(status) == 2) { |
| printk |
| (KERN_INFO PFX "Link speed changed" |
| " to 1000 Mbps\n"); |
| netxen_niu_gbe_set_gmii_mode(adapter, |
| port, |
| enable); |
| } else if (netxen_get_phy_speed(status) == 1) { |
| printk |
| (KERN_INFO PFX "Link speed changed" |
| " to 100 Mbps\n"); |
| netxen_niu_gbe_set_mii_mode(adapter, |
| port, |
| enable); |
| } else if (netxen_get_phy_speed(status) == 0) { |
| printk |
| (KERN_INFO PFX "Link speed changed" |
| " to 10 Mbps\n"); |
| netxen_niu_gbe_set_mii_mode(adapter, |
| port, |
| enable); |
| } else { |
| printk(KERN_ERR PFX "ERROR reading " |
| "PHY status. Invalid speed.\n"); |
| result = -1; |
| } |
| } else { |
| printk(KERN_ERR PFX |
| "ERROR reading PHY status.\n"); |
| result = -1; |
| } |
| |
| } |
| printk(KERN_INFO "\n"); |
| } |
| return result; |
| } |
| #endif /* 0 */ |
| |
| /* |
| * Return the current station MAC address. |
| * Note that the passed-in value must already be in network byte order. |
| */ |
| static int netxen_niu_macaddr_get(struct netxen_adapter *adapter, |
| netxen_ethernet_macaddr_t * addr) |
| { |
| u32 stationhigh; |
| u32 stationlow; |
| int phy = adapter->physical_port; |
| u8 val[8]; |
| |
| if (addr == NULL) |
| return -EINVAL; |
| if ((phy < 0) || (phy > 3)) |
| return -EINVAL; |
| |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), |
| &stationhigh, 4)) |
| return -EIO; |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), |
| &stationlow, 4)) |
| return -EIO; |
| ((__le32 *)val)[1] = cpu_to_le32(stationhigh); |
| ((__le32 *)val)[0] = cpu_to_le32(stationlow); |
| |
| memcpy(addr, val + 2, 6); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the station MAC address. |
| * Note that the passed-in value must already be in network byte order. |
| */ |
| int netxen_niu_macaddr_set(struct netxen_adapter *adapter, |
| netxen_ethernet_macaddr_t addr) |
| { |
| u8 temp[4]; |
| u32 val; |
| int phy = adapter->physical_port; |
| unsigned char mac_addr[6]; |
| int i; |
| DECLARE_MAC_BUF(mac); |
| |
| for (i = 0; i < 10; i++) { |
| temp[0] = temp[1] = 0; |
| memcpy(temp + 2, addr, 2); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx |
| (adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4)) |
| return -EIO; |
| |
| memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32)); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx |
| (adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4)) |
| return -2; |
| |
| netxen_niu_macaddr_get(adapter, |
| (netxen_ethernet_macaddr_t *) mac_addr); |
| if (memcmp(mac_addr, addr, 6) == 0) |
| break; |
| } |
| |
| if (i == 10) { |
| printk(KERN_ERR "%s: cannot set Mac addr for %s\n", |
| netxen_nic_driver_name, adapter->netdev->name); |
| printk(KERN_ERR "MAC address set: %s.\n", |
| print_mac(mac, addr)); |
| printk(KERN_ERR "MAC address get: %s.\n", |
| print_mac(mac, mac_addr)); |
| } |
| return 0; |
| } |
| |
| #if 0 |
| /* Enable a GbE interface */ |
| int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, |
| int port, netxen_niu_gbe_ifmode_t mode) |
| { |
| __u32 mac_cfg0; |
| __u32 mac_cfg1; |
| __u32 mii_cfg; |
| |
| if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) |
| return -EINVAL; |
| |
| mac_cfg0 = 0; |
| netxen_gb_soft_reset(mac_cfg0); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| &mac_cfg0, 4)) |
| return -EIO; |
| mac_cfg0 = 0; |
| netxen_gb_enable_tx(mac_cfg0); |
| netxen_gb_enable_rx(mac_cfg0); |
| netxen_gb_unset_rx_flowctl(mac_cfg0); |
| netxen_gb_tx_reset_pb(mac_cfg0); |
| netxen_gb_rx_reset_pb(mac_cfg0); |
| netxen_gb_tx_reset_mac(mac_cfg0); |
| netxen_gb_rx_reset_mac(mac_cfg0); |
| |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| &mac_cfg0, 4)) |
| return -EIO; |
| mac_cfg1 = 0; |
| netxen_gb_set_preamblelen(mac_cfg1, 0xf); |
| netxen_gb_set_duplex(mac_cfg1); |
| netxen_gb_set_crc_enable(mac_cfg1); |
| netxen_gb_set_padshort(mac_cfg1); |
| netxen_gb_set_checklength(mac_cfg1); |
| netxen_gb_set_hugeframes(mac_cfg1); |
| |
| if (mode == NETXEN_NIU_10_100_MB) { |
| netxen_gb_set_intfmode(mac_cfg1, 1); |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_1(port), |
| &mac_cfg1, 4)) |
| return -EIO; |
| |
| /* set mii mode */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + |
| (port << 3), 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + |
| (port << 3), 1); |
| |
| } else if (mode == NETXEN_NIU_1000_MB) { |
| netxen_gb_set_intfmode(mac_cfg1, 2); |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_GB_MAC_CONFIG_1(port), |
| &mac_cfg1, 4)) |
| return -EIO; |
| /* set gmii mode */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + |
| (port << 3), 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + |
| (port << 3), 1); |
| } |
| mii_cfg = 0; |
| netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), |
| &mii_cfg, 4)) |
| return -EIO; |
| mac_cfg0 = 0; |
| netxen_gb_enable_tx(mac_cfg0); |
| netxen_gb_enable_rx(mac_cfg0); |
| netxen_gb_unset_rx_flowctl(mac_cfg0); |
| netxen_gb_unset_tx_flowctl(mac_cfg0); |
| |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| &mac_cfg0, 4)) |
| return -EIO; |
| return 0; |
| } |
| #endif /* 0 */ |
| |
| /* Disable a GbE interface */ |
| int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) |
| { |
| __u32 mac_cfg0; |
| u32 port = adapter->physical_port; |
| |
| if (port > NETXEN_NIU_MAX_GBE_PORTS) |
| return -EINVAL; |
| mac_cfg0 = 0; |
| netxen_gb_soft_reset(mac_cfg0); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), |
| &mac_cfg0, 4)) |
| return -EIO; |
| return 0; |
| } |
| |
| /* Disable an XG interface */ |
| int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) |
| { |
| __u32 mac_cfg; |
| u32 port = adapter->physical_port; |
| |
| if (port > NETXEN_NIU_MAX_XG_PORTS) |
| return -EINVAL; |
| |
| mac_cfg = 0; |
| if (netxen_nic_hw_write_wx(adapter, |
| NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4)) |
| return -EIO; |
| return 0; |
| } |
| |
| /* Set promiscuous mode for a GbE interface */ |
| int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, |
| netxen_niu_prom_mode_t mode) |
| { |
| __u32 reg; |
| u32 port = adapter->physical_port; |
| |
| if (port > NETXEN_NIU_MAX_GBE_PORTS) |
| return -EINVAL; |
| |
| /* save previous contents */ |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, |
| ®, 4)) |
| return -EIO; |
| if (mode == NETXEN_NIU_PROMISC_MODE) { |
| switch (port) { |
| case 0: |
| netxen_clear_gb_drop_gb0(reg); |
| break; |
| case 1: |
| netxen_clear_gb_drop_gb1(reg); |
| break; |
| case 2: |
| netxen_clear_gb_drop_gb2(reg); |
| break; |
| case 3: |
| netxen_clear_gb_drop_gb3(reg); |
| break; |
| default: |
| return -EIO; |
| } |
| } else { |
| switch (port) { |
| case 0: |
| netxen_set_gb_drop_gb0(reg); |
| break; |
| case 1: |
| netxen_set_gb_drop_gb1(reg); |
| break; |
| case 2: |
| netxen_set_gb_drop_gb2(reg); |
| break; |
| case 3: |
| netxen_set_gb_drop_gb3(reg); |
| break; |
| default: |
| return -EIO; |
| } |
| } |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, |
| ®, 4)) |
| return -EIO; |
| return 0; |
| } |
| |
| /* |
| * Set the MAC address for an XG port |
| * Note that the passed-in value must already be in network byte order. |
| */ |
| int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, |
| netxen_ethernet_macaddr_t addr) |
| { |
| int phy = adapter->physical_port; |
| u8 temp[4]; |
| u32 val; |
| |
| if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS)) |
| return -EIO; |
| |
| temp[0] = temp[1] = 0; |
| switch (phy) { |
| case 0: |
| memcpy(temp + 2, addr, 2); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1, |
| &val, 4)) |
| return -EIO; |
| |
| memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32)); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI, |
| &val, 4)) |
| return -EIO; |
| break; |
| |
| case 1: |
| memcpy(temp + 2, addr, 2); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1, |
| &val, 4)) |
| return -EIO; |
| |
| memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32)); |
| val = le32_to_cpu(*(__le32 *)temp); |
| if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI, |
| &val, 4)) |
| return -EIO; |
| break; |
| |
| default: |
| printk(KERN_ERR "Unknown port %d\n", phy); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| #if 0 |
| /* |
| * Return the current station MAC address. |
| * Note that the passed-in value must already be in network byte order. |
| */ |
| int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, |
| netxen_ethernet_macaddr_t * addr) |
| { |
| int phy = adapter->physical_port; |
| u32 stationhigh; |
| u32 stationlow; |
| u8 val[8]; |
| |
| if (addr == NULL) |
| return -EINVAL; |
| if (phy != 0) |
| return -EINVAL; |
| |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI, |
| &stationhigh, 4)) |
| return -EIO; |
| if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1, |
| &stationlow, 4)) |
| return -EIO; |
| ((__le32 *)val)[1] = cpu_to_le32(stationhigh); |
| ((__le32 *)val)[0] = cpu_to_le32(stationlow); |
| |
| memcpy(addr, val + 2, 6); |
| |
| return 0; |
| } |
| #endif /* 0 */ |
| |
| int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, |
| netxen_niu_prom_mode_t mode) |
| { |
| __u32 reg; |
| u32 port = adapter->physical_port; |
| |
| if (port > NETXEN_NIU_MAX_XG_PORTS) |
| return -EINVAL; |
| |
| if (netxen_nic_hw_read_wx(adapter, |
| NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), ®, 4)) |
| return -EIO; |
| if (mode == NETXEN_NIU_PROMISC_MODE) |
| reg = (reg | 0x2000UL); |
| else |
| reg = (reg & ~0x2000UL); |
| |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); |
| |
| return 0; |
| } |