| /* | |
| * arch/ppc/kernel/traps.c | |
| * | |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Modified by Cort Dougan (cort@cs.nmt.edu) | |
| * and Paul Mackerras (paulus@cs.anu.edu.au) | |
| */ | |
| /* | |
| * This file handles the architecture-dependent parts of hardware exceptions | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/stddef.h> | |
| #include <linux/unistd.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/slab.h> | |
| #include <linux/user.h> | |
| #include <linux/a.out.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/prctl.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include <asm/io.h> | |
| #include <asm/reg.h> | |
| #include <asm/xmon.h> | |
| #ifdef CONFIG_PMAC_BACKLIGHT | |
| #include <asm/backlight.h> | |
| #endif | |
| #include <asm/perfmon.h> | |
| #ifdef CONFIG_XMON | |
| void (*debugger)(struct pt_regs *regs) = xmon; | |
| int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; | |
| int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; | |
| int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; | |
| int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; | |
| void (*debugger_fault_handler)(struct pt_regs *regs); | |
| #else | |
| #ifdef CONFIG_KGDB | |
| void (*debugger)(struct pt_regs *regs); | |
| int (*debugger_bpt)(struct pt_regs *regs); | |
| int (*debugger_sstep)(struct pt_regs *regs); | |
| int (*debugger_iabr_match)(struct pt_regs *regs); | |
| int (*debugger_dabr_match)(struct pt_regs *regs); | |
| void (*debugger_fault_handler)(struct pt_regs *regs); | |
| #else | |
| #define debugger(regs) do { } while (0) | |
| #define debugger_bpt(regs) 0 | |
| #define debugger_sstep(regs) 0 | |
| #define debugger_iabr_match(regs) 0 | |
| #define debugger_dabr_match(regs) 0 | |
| #define debugger_fault_handler ((void (*)(struct pt_regs *))0) | |
| #endif | |
| #endif | |
| /* | |
| * Trap & Exception support | |
| */ | |
| DEFINE_SPINLOCK(die_lock); | |
| void die(const char * str, struct pt_regs * fp, long err) | |
| { | |
| static int die_counter; | |
| int nl = 0; | |
| console_verbose(); | |
| spin_lock_irq(&die_lock); | |
| #ifdef CONFIG_PMAC_BACKLIGHT | |
| if (_machine == _MACH_Pmac) { | |
| set_backlight_enable(1); | |
| set_backlight_level(BACKLIGHT_MAX); | |
| } | |
| #endif | |
| printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); | |
| #ifdef CONFIG_PREEMPT | |
| printk("PREEMPT "); | |
| nl = 1; | |
| #endif | |
| #ifdef CONFIG_SMP | |
| printk("SMP NR_CPUS=%d ", NR_CPUS); | |
| nl = 1; | |
| #endif | |
| if (nl) | |
| printk("\n"); | |
| show_regs(fp); | |
| spin_unlock_irq(&die_lock); | |
| /* do_exit() should take care of panic'ing from an interrupt | |
| * context so we don't handle it here | |
| */ | |
| do_exit(err); | |
| } | |
| void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) | |
| { | |
| siginfo_t info; | |
| if (!user_mode(regs)) { | |
| debugger(regs); | |
| die("Exception in kernel mode", regs, signr); | |
| } | |
| info.si_signo = signr; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = (void __user *) addr; | |
| force_sig_info(signr, &info, current); | |
| /* | |
| * Init gets no signals that it doesn't have a handler for. | |
| * That's all very well, but if it has caused a synchronous | |
| * exception and we ignore the resulting signal, it will just | |
| * generate the same exception over and over again and we get | |
| * nowhere. Better to kill it and let the kernel panic. | |
| */ | |
| if (current->pid == 1) { | |
| __sighandler_t handler; | |
| spin_lock_irq(¤t->sighand->siglock); | |
| handler = current->sighand->action[signr-1].sa.sa_handler; | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| if (handler == SIG_DFL) { | |
| /* init has generated a synchronous exception | |
| and it doesn't have a handler for the signal */ | |
| printk(KERN_CRIT "init has generated signal %d " | |
| "but has no handler for it\n", signr); | |
| do_exit(signr); | |
| } | |
| } | |
| } | |
| /* | |
| * I/O accesses can cause machine checks on powermacs. | |
| * Check if the NIP corresponds to the address of a sync | |
| * instruction for which there is an entry in the exception | |
| * table. | |
| * Note that the 601 only takes a machine check on TEA | |
| * (transfer error ack) signal assertion, and does not | |
| * set any of the top 16 bits of SRR1. | |
| * -- paulus. | |
| */ | |
| static inline int check_io_access(struct pt_regs *regs) | |
| { | |
| #ifdef CONFIG_PPC_PMAC | |
| unsigned long msr = regs->msr; | |
| const struct exception_table_entry *entry; | |
| unsigned int *nip = (unsigned int *)regs->nip; | |
| if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000))) | |
| && (entry = search_exception_tables(regs->nip)) != NULL) { | |
| /* | |
| * Check that it's a sync instruction, or somewhere | |
| * in the twi; isync; nop sequence that inb/inw/inl uses. | |
| * As the address is in the exception table | |
| * we should be able to read the instr there. | |
| * For the debug message, we look at the preceding | |
| * load or store. | |
| */ | |
| if (*nip == 0x60000000) /* nop */ | |
| nip -= 2; | |
| else if (*nip == 0x4c00012c) /* isync */ | |
| --nip; | |
| if (*nip == 0x7c0004ac || (*nip >> 26) == 3) { | |
| /* sync or twi */ | |
| unsigned int rb; | |
| --nip; | |
| rb = (*nip >> 11) & 0x1f; | |
| printk(KERN_DEBUG "%s bad port %lx at %p\n", | |
| (*nip & 0x100)? "OUT to": "IN from", | |
| regs->gpr[rb] - _IO_BASE, nip); | |
| regs->msr |= MSR_RI; | |
| regs->nip = entry->fixup; | |
| return 1; | |
| } | |
| } | |
| #endif /* CONFIG_PPC_PMAC */ | |
| return 0; | |
| } | |
| #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | |
| /* On 4xx, the reason for the machine check or program exception | |
| is in the ESR. */ | |
| #define get_reason(regs) ((regs)->dsisr) | |
| #ifndef CONFIG_FSL_BOOKE | |
| #define get_mc_reason(regs) ((regs)->dsisr) | |
| #else | |
| #define get_mc_reason(regs) (mfspr(SPRN_MCSR)) | |
| #endif | |
| #define REASON_FP ESR_FP | |
| #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) | |
| #define REASON_PRIVILEGED ESR_PPR | |
| #define REASON_TRAP ESR_PTR | |
| /* single-step stuff */ | |
| #define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC) | |
| #define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC) | |
| #else | |
| /* On non-4xx, the reason for the machine check or program | |
| exception is in the MSR. */ | |
| #define get_reason(regs) ((regs)->msr) | |
| #define get_mc_reason(regs) ((regs)->msr) | |
| #define REASON_FP 0x100000 | |
| #define REASON_ILLEGAL 0x80000 | |
| #define REASON_PRIVILEGED 0x40000 | |
| #define REASON_TRAP 0x20000 | |
| #define single_stepping(regs) ((regs)->msr & MSR_SE) | |
| #define clear_single_step(regs) ((regs)->msr &= ~MSR_SE) | |
| #endif | |
| /* | |
| * This is "fall-back" implementation for configurations | |
| * which don't provide platform-specific machine check info | |
| */ | |
| void __attribute__ ((weak)) | |
| platform_machine_check(struct pt_regs *regs) | |
| { | |
| } | |
| void MachineCheckException(struct pt_regs *regs) | |
| { | |
| unsigned long reason = get_mc_reason(regs); | |
| if (user_mode(regs)) { | |
| regs->msr |= MSR_RI; | |
| _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); | |
| return; | |
| } | |
| #if defined(CONFIG_8xx) && defined(CONFIG_PCI) | |
| /* the qspan pci read routines can cause machine checks -- Cort */ | |
| bad_page_fault(regs, regs->dar, SIGBUS); | |
| return; | |
| #endif | |
| if (debugger_fault_handler) { | |
| debugger_fault_handler(regs); | |
| regs->msr |= MSR_RI; | |
| return; | |
| } | |
| if (check_io_access(regs)) | |
| return; | |
| #if defined(CONFIG_4xx) && !defined(CONFIG_440A) | |
| if (reason & ESR_IMCP) { | |
| printk("Instruction"); | |
| mtspr(SPRN_ESR, reason & ~ESR_IMCP); | |
| } else | |
| printk("Data"); | |
| printk(" machine check in kernel mode.\n"); | |
| #elif defined(CONFIG_440A) | |
| printk("Machine check in kernel mode.\n"); | |
| if (reason & ESR_IMCP){ | |
| printk("Instruction Synchronous Machine Check exception\n"); | |
| mtspr(SPRN_ESR, reason & ~ESR_IMCP); | |
| } | |
| else { | |
| u32 mcsr = mfspr(SPRN_MCSR); | |
| if (mcsr & MCSR_IB) | |
| printk("Instruction Read PLB Error\n"); | |
| if (mcsr & MCSR_DRB) | |
| printk("Data Read PLB Error\n"); | |
| if (mcsr & MCSR_DWB) | |
| printk("Data Write PLB Error\n"); | |
| if (mcsr & MCSR_TLBP) | |
| printk("TLB Parity Error\n"); | |
| if (mcsr & MCSR_ICP){ | |
| flush_instruction_cache(); | |
| printk("I-Cache Parity Error\n"); | |
| } | |
| if (mcsr & MCSR_DCSP) | |
| printk("D-Cache Search Parity Error\n"); | |
| if (mcsr & MCSR_DCFP) | |
| printk("D-Cache Flush Parity Error\n"); | |
| if (mcsr & MCSR_IMPE) | |
| printk("Machine Check exception is imprecise\n"); | |
| /* Clear MCSR */ | |
| mtspr(SPRN_MCSR, mcsr); | |
| } | |
| #elif defined (CONFIG_E500) | |
| printk("Machine check in kernel mode.\n"); | |
| printk("Caused by (from MCSR=%lx): ", reason); | |
| if (reason & MCSR_MCP) | |
| printk("Machine Check Signal\n"); | |
| if (reason & MCSR_ICPERR) | |
| printk("Instruction Cache Parity Error\n"); | |
| if (reason & MCSR_DCP_PERR) | |
| printk("Data Cache Push Parity Error\n"); | |
| if (reason & MCSR_DCPERR) | |
| printk("Data Cache Parity Error\n"); | |
| if (reason & MCSR_GL_CI) | |
| printk("Guarded Load or Cache-Inhibited stwcx.\n"); | |
| if (reason & MCSR_BUS_IAERR) | |
| printk("Bus - Instruction Address Error\n"); | |
| if (reason & MCSR_BUS_RAERR) | |
| printk("Bus - Read Address Error\n"); | |
| if (reason & MCSR_BUS_WAERR) | |
| printk("Bus - Write Address Error\n"); | |
| if (reason & MCSR_BUS_IBERR) | |
| printk("Bus - Instruction Data Error\n"); | |
| if (reason & MCSR_BUS_RBERR) | |
| printk("Bus - Read Data Bus Error\n"); | |
| if (reason & MCSR_BUS_WBERR) | |
| printk("Bus - Read Data Bus Error\n"); | |
| if (reason & MCSR_BUS_IPERR) | |
| printk("Bus - Instruction Parity Error\n"); | |
| if (reason & MCSR_BUS_RPERR) | |
| printk("Bus - Read Parity Error\n"); | |
| #elif defined (CONFIG_E200) | |
| printk("Machine check in kernel mode.\n"); | |
| printk("Caused by (from MCSR=%lx): ", reason); | |
| if (reason & MCSR_MCP) | |
| printk("Machine Check Signal\n"); | |
| if (reason & MCSR_CP_PERR) | |
| printk("Cache Push Parity Error\n"); | |
| if (reason & MCSR_CPERR) | |
| printk("Cache Parity Error\n"); | |
| if (reason & MCSR_EXCP_ERR) | |
| printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n"); | |
| if (reason & MCSR_BUS_IRERR) | |
| printk("Bus - Read Bus Error on instruction fetch\n"); | |
| if (reason & MCSR_BUS_DRERR) | |
| printk("Bus - Read Bus Error on data load\n"); | |
| if (reason & MCSR_BUS_WRERR) | |
| printk("Bus - Write Bus Error on buffered store or cache line push\n"); | |
| #else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */ | |
| printk("Machine check in kernel mode.\n"); | |
| printk("Caused by (from SRR1=%lx): ", reason); | |
| switch (reason & 0x601F0000) { | |
| case 0x80000: | |
| printk("Machine check signal\n"); | |
| break; | |
| case 0: /* for 601 */ | |
| case 0x40000: | |
| case 0x140000: /* 7450 MSS error and TEA */ | |
| printk("Transfer error ack signal\n"); | |
| break; | |
| case 0x20000: | |
| printk("Data parity error signal\n"); | |
| break; | |
| case 0x10000: | |
| printk("Address parity error signal\n"); | |
| break; | |
| case 0x20000000: | |
| printk("L1 Data Cache error\n"); | |
| break; | |
| case 0x40000000: | |
| printk("L1 Instruction Cache error\n"); | |
| break; | |
| case 0x00100000: | |
| printk("L2 data cache parity error\n"); | |
| break; | |
| default: | |
| printk("Unknown values in msr\n"); | |
| } | |
| #endif /* CONFIG_4xx */ | |
| /* | |
| * Optional platform-provided routine to print out | |
| * additional info, e.g. bus error registers. | |
| */ | |
| platform_machine_check(regs); | |
| debugger(regs); | |
| die("machine check", regs, SIGBUS); | |
| } | |
| void SMIException(struct pt_regs *regs) | |
| { | |
| debugger(regs); | |
| #if !(defined(CONFIG_XMON) || defined(CONFIG_KGDB)) | |
| show_regs(regs); | |
| panic("System Management Interrupt"); | |
| #endif | |
| } | |
| void UnknownException(struct pt_regs *regs) | |
| { | |
| printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx %s\n", | |
| regs->nip, regs->msr, regs->trap, print_tainted()); | |
| _exception(SIGTRAP, regs, 0, 0); | |
| } | |
| void InstructionBreakpoint(struct pt_regs *regs) | |
| { | |
| if (debugger_iabr_match(regs)) | |
| return; | |
| _exception(SIGTRAP, regs, TRAP_BRKPT, 0); | |
| } | |
| void RunModeException(struct pt_regs *regs) | |
| { | |
| _exception(SIGTRAP, regs, 0, 0); | |
| } | |
| /* Illegal instruction emulation support. Originally written to | |
| * provide the PVR to user applications using the mfspr rd, PVR. | |
| * Return non-zero if we can't emulate, or -EFAULT if the associated | |
| * memory access caused an access fault. Return zero on success. | |
| * | |
| * There are a couple of ways to do this, either "decode" the instruction | |
| * or directly match lots of bits. In this case, matching lots of | |
| * bits is faster and easier. | |
| * | |
| */ | |
| #define INST_MFSPR_PVR 0x7c1f42a6 | |
| #define INST_MFSPR_PVR_MASK 0xfc1fffff | |
| #define INST_DCBA 0x7c0005ec | |
| #define INST_DCBA_MASK 0x7c0007fe | |
| #define INST_MCRXR 0x7c000400 | |
| #define INST_MCRXR_MASK 0x7c0007fe | |
| #define INST_STRING 0x7c00042a | |
| #define INST_STRING_MASK 0x7c0007fe | |
| #define INST_STRING_GEN_MASK 0x7c00067e | |
| #define INST_LSWI 0x7c0004aa | |
| #define INST_LSWX 0x7c00042a | |
| #define INST_STSWI 0x7c0005aa | |
| #define INST_STSWX 0x7c00052a | |
| static int emulate_string_inst(struct pt_regs *regs, u32 instword) | |
| { | |
| u8 rT = (instword >> 21) & 0x1f; | |
| u8 rA = (instword >> 16) & 0x1f; | |
| u8 NB_RB = (instword >> 11) & 0x1f; | |
| u32 num_bytes; | |
| unsigned long EA; | |
| int pos = 0; | |
| /* Early out if we are an invalid form of lswx */ | |
| if ((instword & INST_STRING_MASK) == INST_LSWX) | |
| if ((rT == rA) || (rT == NB_RB)) | |
| return -EINVAL; | |
| EA = (rA == 0) ? 0 : regs->gpr[rA]; | |
| switch (instword & INST_STRING_MASK) { | |
| case INST_LSWX: | |
| case INST_STSWX: | |
| EA += NB_RB; | |
| num_bytes = regs->xer & 0x7f; | |
| break; | |
| case INST_LSWI: | |
| case INST_STSWI: | |
| num_bytes = (NB_RB == 0) ? 32 : NB_RB; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| while (num_bytes != 0) | |
| { | |
| u8 val; | |
| u32 shift = 8 * (3 - (pos & 0x3)); | |
| switch ((instword & INST_STRING_MASK)) { | |
| case INST_LSWX: | |
| case INST_LSWI: | |
| if (get_user(val, (u8 __user *)EA)) | |
| return -EFAULT; | |
| /* first time updating this reg, | |
| * zero it out */ | |
| if (pos == 0) | |
| regs->gpr[rT] = 0; | |
| regs->gpr[rT] |= val << shift; | |
| break; | |
| case INST_STSWI: | |
| case INST_STSWX: | |
| val = regs->gpr[rT] >> shift; | |
| if (put_user(val, (u8 __user *)EA)) | |
| return -EFAULT; | |
| break; | |
| } | |
| /* move EA to next address */ | |
| EA += 1; | |
| num_bytes--; | |
| /* manage our position within the register */ | |
| if (++pos == 4) { | |
| pos = 0; | |
| if (++rT == 32) | |
| rT = 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int emulate_instruction(struct pt_regs *regs) | |
| { | |
| u32 instword; | |
| u32 rd; | |
| if (!user_mode(regs)) | |
| return -EINVAL; | |
| CHECK_FULL_REGS(regs); | |
| if (get_user(instword, (u32 __user *)(regs->nip))) | |
| return -EFAULT; | |
| /* Emulate the mfspr rD, PVR. | |
| */ | |
| if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) { | |
| rd = (instword >> 21) & 0x1f; | |
| regs->gpr[rd] = mfspr(SPRN_PVR); | |
| return 0; | |
| } | |
| /* Emulating the dcba insn is just a no-op. */ | |
| if ((instword & INST_DCBA_MASK) == INST_DCBA) | |
| return 0; | |
| /* Emulate the mcrxr insn. */ | |
| if ((instword & INST_MCRXR_MASK) == INST_MCRXR) { | |
| int shift = (instword >> 21) & 0x1c; | |
| unsigned long msk = 0xf0000000UL >> shift; | |
| regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk); | |
| regs->xer &= ~0xf0000000UL; | |
| return 0; | |
| } | |
| /* Emulate load/store string insn. */ | |
| if ((instword & INST_STRING_GEN_MASK) == INST_STRING) | |
| return emulate_string_inst(regs, instword); | |
| return -EINVAL; | |
| } | |
| /* | |
| * After we have successfully emulated an instruction, we have to | |
| * check if the instruction was being single-stepped, and if so, | |
| * pretend we got a single-step exception. This was pointed out | |
| * by Kumar Gala. -- paulus | |
| */ | |
| static void emulate_single_step(struct pt_regs *regs) | |
| { | |
| if (single_stepping(regs)) { | |
| clear_single_step(regs); | |
| _exception(SIGTRAP, regs, TRAP_TRACE, 0); | |
| } | |
| } | |
| /* | |
| * Look through the list of trap instructions that are used for BUG(), | |
| * BUG_ON() and WARN_ON() and see if we hit one. At this point we know | |
| * that the exception was caused by a trap instruction of some kind. | |
| * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0 | |
| * otherwise. | |
| */ | |
| extern struct bug_entry __start___bug_table[], __stop___bug_table[]; | |
| #ifndef CONFIG_MODULES | |
| #define module_find_bug(x) NULL | |
| #endif | |
| static struct bug_entry *find_bug(unsigned long bugaddr) | |
| { | |
| struct bug_entry *bug; | |
| for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) | |
| if (bugaddr == bug->bug_addr) | |
| return bug; | |
| return module_find_bug(bugaddr); | |
| } | |
| int check_bug_trap(struct pt_regs *regs) | |
| { | |
| struct bug_entry *bug; | |
| unsigned long addr; | |
| if (regs->msr & MSR_PR) | |
| return 0; /* not in kernel */ | |
| addr = regs->nip; /* address of trap instruction */ | |
| if (addr < PAGE_OFFSET) | |
| return 0; | |
| bug = find_bug(regs->nip); | |
| if (bug == NULL) | |
| return 0; | |
| if (bug->line & BUG_WARNING_TRAP) { | |
| /* this is a WARN_ON rather than BUG/BUG_ON */ | |
| #ifdef CONFIG_XMON | |
| xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", | |
| bug->function, bug->file, | |
| bug->line & ~BUG_WARNING_TRAP); | |
| #endif /* CONFIG_XMON */ | |
| printk(KERN_ERR "Badness in %s at %s:%d\n", | |
| bug->function, bug->file, | |
| bug->line & ~BUG_WARNING_TRAP); | |
| dump_stack(); | |
| return 1; | |
| } | |
| #ifdef CONFIG_XMON | |
| xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", | |
| bug->function, bug->file, bug->line); | |
| xmon(regs); | |
| #endif /* CONFIG_XMON */ | |
| printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", | |
| bug->function, bug->file, bug->line); | |
| return 0; | |
| } | |
| void ProgramCheckException(struct pt_regs *regs) | |
| { | |
| unsigned int reason = get_reason(regs); | |
| extern int do_mathemu(struct pt_regs *regs); | |
| #ifdef CONFIG_MATH_EMULATION | |
| /* (reason & REASON_ILLEGAL) would be the obvious thing here, | |
| * but there seems to be a hardware bug on the 405GP (RevD) | |
| * that means ESR is sometimes set incorrectly - either to | |
| * ESR_DST (!?) or 0. In the process of chasing this with the | |
| * hardware people - not sure if it can happen on any illegal | |
| * instruction or only on FP instructions, whether there is a | |
| * pattern to occurences etc. -dgibson 31/Mar/2003 */ | |
| if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) { | |
| emulate_single_step(regs); | |
| return; | |
| } | |
| #endif /* CONFIG_MATH_EMULATION */ | |
| if (reason & REASON_FP) { | |
| /* IEEE FP exception */ | |
| int code = 0; | |
| u32 fpscr; | |
| /* We must make sure the FP state is consistent with | |
| * our MSR_FP in regs | |
| */ | |
| preempt_disable(); | |
| if (regs->msr & MSR_FP) | |
| giveup_fpu(current); | |
| preempt_enable(); | |
| fpscr = current->thread.fpscr; | |
| fpscr &= fpscr << 22; /* mask summary bits with enables */ | |
| if (fpscr & FPSCR_VX) | |
| code = FPE_FLTINV; | |
| else if (fpscr & FPSCR_OX) | |
| code = FPE_FLTOVF; | |
| else if (fpscr & FPSCR_UX) | |
| code = FPE_FLTUND; | |
| else if (fpscr & FPSCR_ZX) | |
| code = FPE_FLTDIV; | |
| else if (fpscr & FPSCR_XX) | |
| code = FPE_FLTRES; | |
| _exception(SIGFPE, regs, code, regs->nip); | |
| return; | |
| } | |
| if (reason & REASON_TRAP) { | |
| /* trap exception */ | |
| if (debugger_bpt(regs)) | |
| return; | |
| if (check_bug_trap(regs)) { | |
| regs->nip += 4; | |
| return; | |
| } | |
| _exception(SIGTRAP, regs, TRAP_BRKPT, 0); | |
| return; | |
| } | |
| /* Try to emulate it if we should. */ | |
| if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) { | |
| switch (emulate_instruction(regs)) { | |
| case 0: | |
| regs->nip += 4; | |
| emulate_single_step(regs); | |
| return; | |
| case -EFAULT: | |
| _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); | |
| return; | |
| } | |
| } | |
| if (reason & REASON_PRIVILEGED) | |
| _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); | |
| else | |
| _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); | |
| } | |
| void SingleStepException(struct pt_regs *regs) | |
| { | |
| regs->msr &= ~(MSR_SE | MSR_BE); /* Turn off 'trace' bits */ | |
| if (debugger_sstep(regs)) | |
| return; | |
| _exception(SIGTRAP, regs, TRAP_TRACE, 0); | |
| } | |
| void AlignmentException(struct pt_regs *regs) | |
| { | |
| int fixed; | |
| fixed = fix_alignment(regs); | |
| if (fixed == 1) { | |
| regs->nip += 4; /* skip over emulated instruction */ | |
| emulate_single_step(regs); | |
| return; | |
| } | |
| if (fixed == -EFAULT) { | |
| /* fixed == -EFAULT means the operand address was bad */ | |
| if (user_mode(regs)) | |
| _exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar); | |
| else | |
| bad_page_fault(regs, regs->dar, SIGSEGV); | |
| return; | |
| } | |
| _exception(SIGBUS, regs, BUS_ADRALN, regs->dar); | |
| } | |
| void StackOverflow(struct pt_regs *regs) | |
| { | |
| printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n", | |
| current, regs->gpr[1]); | |
| debugger(regs); | |
| show_regs(regs); | |
| panic("kernel stack overflow"); | |
| } | |
| void nonrecoverable_exception(struct pt_regs *regs) | |
| { | |
| printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n", | |
| regs->nip, regs->msr); | |
| debugger(regs); | |
| die("nonrecoverable exception", regs, SIGKILL); | |
| } | |
| void trace_syscall(struct pt_regs *regs) | |
| { | |
| printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld %s\n", | |
| current, current->pid, regs->nip, regs->link, regs->gpr[0], | |
| regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted()); | |
| } | |
| #ifdef CONFIG_8xx | |
| void SoftwareEmulation(struct pt_regs *regs) | |
| { | |
| extern int do_mathemu(struct pt_regs *); | |
| extern int Soft_emulate_8xx(struct pt_regs *); | |
| int errcode; | |
| CHECK_FULL_REGS(regs); | |
| if (!user_mode(regs)) { | |
| debugger(regs); | |
| die("Kernel Mode Software FPU Emulation", regs, SIGFPE); | |
| } | |
| #ifdef CONFIG_MATH_EMULATION | |
| errcode = do_mathemu(regs); | |
| #else | |
| errcode = Soft_emulate_8xx(regs); | |
| #endif | |
| if (errcode) { | |
| if (errcode > 0) | |
| _exception(SIGFPE, regs, 0, 0); | |
| else if (errcode == -EFAULT) | |
| _exception(SIGSEGV, regs, 0, 0); | |
| else | |
| _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); | |
| } else | |
| emulate_single_step(regs); | |
| } | |
| #endif /* CONFIG_8xx */ | |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) | |
| void DebugException(struct pt_regs *regs, unsigned long debug_status) | |
| { | |
| if (debug_status & DBSR_IC) { /* instruction completion */ | |
| regs->msr &= ~MSR_DE; | |
| if (user_mode(regs)) { | |
| current->thread.dbcr0 &= ~DBCR0_IC; | |
| } else { | |
| /* Disable instruction completion */ | |
| mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC); | |
| /* Clear the instruction completion event */ | |
| mtspr(SPRN_DBSR, DBSR_IC); | |
| if (debugger_sstep(regs)) | |
| return; | |
| } | |
| _exception(SIGTRAP, regs, TRAP_TRACE, 0); | |
| } | |
| } | |
| #endif /* CONFIG_4xx || CONFIG_BOOKE */ | |
| #if !defined(CONFIG_TAU_INT) | |
| void TAUException(struct pt_regs *regs) | |
| { | |
| printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx %s\n", | |
| regs->nip, regs->msr, regs->trap, print_tainted()); | |
| } | |
| #endif /* CONFIG_INT_TAU */ | |
| void AltivecUnavailException(struct pt_regs *regs) | |
| { | |
| static int kernel_altivec_count; | |
| #ifndef CONFIG_ALTIVEC | |
| if (user_mode(regs)) { | |
| /* A user program has executed an altivec instruction, | |
| but this kernel doesn't support altivec. */ | |
| _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); | |
| return; | |
| } | |
| #endif | |
| /* The kernel has executed an altivec instruction without | |
| first enabling altivec. Whinge but let it do it. */ | |
| if (++kernel_altivec_count < 10) | |
| printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n", | |
| current, regs->nip); | |
| regs->msr |= MSR_VEC; | |
| } | |
| #ifdef CONFIG_ALTIVEC | |
| void AltivecAssistException(struct pt_regs *regs) | |
| { | |
| int err; | |
| preempt_disable(); | |
| if (regs->msr & MSR_VEC) | |
| giveup_altivec(current); | |
| preempt_enable(); | |
| if (!user_mode(regs)) { | |
| printk(KERN_ERR "altivec assist exception in kernel mode" | |
| " at %lx\n", regs->nip); | |
| debugger(regs); | |
| die("altivec assist exception", regs, SIGFPE); | |
| return; | |
| } | |
| err = emulate_altivec(regs); | |
| if (err == 0) { | |
| regs->nip += 4; /* skip emulated instruction */ | |
| emulate_single_step(regs); | |
| return; | |
| } | |
| if (err == -EFAULT) { | |
| /* got an error reading the instruction */ | |
| _exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip); | |
| } else { | |
| /* didn't recognize the instruction */ | |
| /* XXX quick hack for now: set the non-Java bit in the VSCR */ | |
| printk(KERN_ERR "unrecognized altivec instruction " | |
| "in %s at %lx\n", current->comm, regs->nip); | |
| current->thread.vscr.u[3] |= 0x10000; | |
| } | |
| } | |
| #endif /* CONFIG_ALTIVEC */ | |
| #ifdef CONFIG_E500 | |
| void PerformanceMonitorException(struct pt_regs *regs) | |
| { | |
| perf_irq(regs); | |
| } | |
| #endif | |
| #ifdef CONFIG_FSL_BOOKE | |
| void CacheLockingException(struct pt_regs *regs, unsigned long address, | |
| unsigned long error_code) | |
| { | |
| /* We treat cache locking instructions from the user | |
| * as priv ops, in the future we could try to do | |
| * something smarter | |
| */ | |
| if (error_code & (ESR_DLK|ESR_ILK)) | |
| _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); | |
| return; | |
| } | |
| #endif /* CONFIG_FSL_BOOKE */ | |
| #ifdef CONFIG_SPE | |
| void SPEFloatingPointException(struct pt_regs *regs) | |
| { | |
| unsigned long spefscr; | |
| int fpexc_mode; | |
| int code = 0; | |
| spefscr = current->thread.spefscr; | |
| fpexc_mode = current->thread.fpexc_mode; | |
| /* Hardware does not neccessarily set sticky | |
| * underflow/overflow/invalid flags */ | |
| if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) { | |
| code = FPE_FLTOVF; | |
| spefscr |= SPEFSCR_FOVFS; | |
| } | |
| else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) { | |
| code = FPE_FLTUND; | |
| spefscr |= SPEFSCR_FUNFS; | |
| } | |
| else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV)) | |
| code = FPE_FLTDIV; | |
| else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) { | |
| code = FPE_FLTINV; | |
| spefscr |= SPEFSCR_FINVS; | |
| } | |
| else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES)) | |
| code = FPE_FLTRES; | |
| current->thread.spefscr = spefscr; | |
| _exception(SIGFPE, regs, code, regs->nip); | |
| return; | |
| } | |
| #endif | |
| #ifdef CONFIG_BOOKE_WDT | |
| /* | |
| * Default handler for a Watchdog exception, | |
| * spins until a reboot occurs | |
| */ | |
| void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs) | |
| { | |
| /* Generic WatchdogHandler, implement your own */ | |
| mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE)); | |
| return; | |
| } | |
| void WatchdogException(struct pt_regs *regs) | |
| { | |
| printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n"); | |
| WatchdogHandler(regs); | |
| } | |
| #endif | |
| void __init trap_init(void) | |
| { | |
| } |