| /* |
| * Atheros CARL9170 driver |
| * |
| * LED handling |
| * |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2009, 2010, Christian Lamparer <chunkeey@googlemail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, see |
| * http://www.gnu.org/licenses/. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * Copyright (c) 2007-2008 Atheros Communications, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "carl9170.h" |
| #include "cmd.h" |
| |
| int carl9170_led_set_state(struct ar9170 *ar, const u32 led_state) |
| { |
| return carl9170_write_reg(ar, AR9170_GPIO_REG_PORT_DATA, led_state); |
| } |
| |
| int carl9170_led_init(struct ar9170 *ar) |
| { |
| int err; |
| |
| /* disable LEDs */ |
| /* GPIO [0/1 mode: output, 2/3: input] */ |
| err = carl9170_write_reg(ar, AR9170_GPIO_REG_PORT_TYPE, 3); |
| if (err) |
| goto out; |
| |
| /* GPIO 0/1 value: off */ |
| err = carl9170_led_set_state(ar, 0); |
| |
| out: |
| return err; |
| } |
| |
| #ifdef CONFIG_CARL9170_LEDS |
| static void carl9170_led_update(struct work_struct *work) |
| { |
| struct ar9170 *ar = container_of(work, struct ar9170, led_work.work); |
| int i, tmp = 300, blink_delay = 1000; |
| u32 led_val = 0; |
| bool rerun = false; |
| |
| if (!IS_ACCEPTING_CMD(ar)) |
| return; |
| |
| mutex_lock(&ar->mutex); |
| for (i = 0; i < AR9170_NUM_LEDS; i++) { |
| if (ar->leds[i].registered) { |
| if (ar->leds[i].last_state || |
| ar->leds[i].toggled) { |
| |
| if (ar->leds[i].toggled) |
| tmp = 70 + 200 / (ar->leds[i].toggled); |
| |
| if (tmp < blink_delay) |
| blink_delay = tmp; |
| |
| led_val |= 1 << i; |
| ar->leds[i].toggled = 0; |
| rerun = true; |
| } |
| } |
| } |
| |
| carl9170_led_set_state(ar, led_val); |
| mutex_unlock(&ar->mutex); |
| |
| if (!rerun) |
| return; |
| |
| ieee80211_queue_delayed_work(ar->hw, |
| &ar->led_work, |
| msecs_to_jiffies(blink_delay)); |
| } |
| |
| static void carl9170_led_set_brightness(struct led_classdev *led, |
| enum led_brightness brightness) |
| { |
| struct carl9170_led *arl = container_of(led, struct carl9170_led, l); |
| struct ar9170 *ar = arl->ar; |
| |
| if (!arl->registered) |
| return; |
| |
| if (arl->last_state != !!brightness) { |
| arl->toggled++; |
| arl->last_state = !!brightness; |
| } |
| |
| if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled)) |
| ieee80211_queue_delayed_work(ar->hw, &ar->led_work, HZ / 10); |
| } |
| |
| static int carl9170_led_register_led(struct ar9170 *ar, int i, char *name, |
| const char *trigger) |
| { |
| int err; |
| |
| snprintf(ar->leds[i].name, sizeof(ar->leds[i].name), |
| "carl9170-%s::%s", wiphy_name(ar->hw->wiphy), name); |
| |
| ar->leds[i].ar = ar; |
| ar->leds[i].l.name = ar->leds[i].name; |
| ar->leds[i].l.brightness_set = carl9170_led_set_brightness; |
| ar->leds[i].l.brightness = 0; |
| ar->leds[i].l.default_trigger = trigger; |
| |
| err = led_classdev_register(wiphy_dev(ar->hw->wiphy), |
| &ar->leds[i].l); |
| if (err) { |
| wiphy_err(ar->hw->wiphy, "failed to register %s LED (%d).\n", |
| ar->leds[i].name, err); |
| } else { |
| ar->leds[i].registered = true; |
| } |
| |
| return err; |
| } |
| |
| void carl9170_led_unregister(struct ar9170 *ar) |
| { |
| int i; |
| |
| for (i = 0; i < AR9170_NUM_LEDS; i++) |
| if (ar->leds[i].registered) { |
| led_classdev_unregister(&ar->leds[i].l); |
| ar->leds[i].registered = false; |
| ar->leds[i].toggled = 0; |
| } |
| |
| cancel_delayed_work_sync(&ar->led_work); |
| } |
| |
| int carl9170_led_register(struct ar9170 *ar) |
| { |
| int err; |
| |
| INIT_DELAYED_WORK(&ar->led_work, carl9170_led_update); |
| |
| err = carl9170_led_register_led(ar, 0, "tx", |
| ieee80211_get_tx_led_name(ar->hw)); |
| if (err) |
| goto fail; |
| |
| if (ar->features & CARL9170_ONE_LED) |
| return 0; |
| |
| err = carl9170_led_register_led(ar, 1, "assoc", |
| ieee80211_get_assoc_led_name(ar->hw)); |
| if (err) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| carl9170_led_unregister(ar); |
| return err; |
| } |
| |
| #endif /* CONFIG_CARL9170_LEDS */ |