| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * KVM/MIPS: Instruction/Exception emulation |
| * |
| * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. |
| * Authors: Sanjay Lal <sanjayl@kymasys.com> |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/ktime.h> |
| #include <linux/kvm_host.h> |
| #include <linux/vmalloc.h> |
| #include <linux/fs.h> |
| #include <linux/bootmem.h> |
| #include <linux/random.h> |
| #include <asm/page.h> |
| #include <asm/cacheflush.h> |
| #include <asm/cacheops.h> |
| #include <asm/cpu-info.h> |
| #include <asm/mmu_context.h> |
| #include <asm/tlbflush.h> |
| #include <asm/inst.h> |
| |
| #undef CONFIG_MIPS_MT |
| #include <asm/r4kcache.h> |
| #define CONFIG_MIPS_MT |
| |
| #include "interrupt.h" |
| #include "commpage.h" |
| |
| #include "trace.h" |
| |
| /* |
| * Compute the return address and do emulate branch simulation, if required. |
| * This function should be called only in branch delay slot active. |
| */ |
| static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc, |
| unsigned long *out) |
| { |
| unsigned int dspcontrol; |
| union mips_instruction insn; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| long epc = instpc; |
| long nextpc; |
| int err; |
| |
| if (epc & 3) { |
| kvm_err("%s: unaligned epc\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Read the instruction */ |
| err = kvm_get_badinstrp((u32 *)epc, vcpu, &insn.word); |
| if (err) |
| return err; |
| |
| switch (insn.i_format.opcode) { |
| /* jr and jalr are in r_format format. */ |
| case spec_op: |
| switch (insn.r_format.func) { |
| case jalr_op: |
| arch->gprs[insn.r_format.rd] = epc + 8; |
| /* Fall through */ |
| case jr_op: |
| nextpc = arch->gprs[insn.r_format.rs]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| /* |
| * This group contains: |
| * bltz_op, bgez_op, bltzl_op, bgezl_op, |
| * bltzal_op, bgezal_op, bltzall_op, bgezall_op. |
| */ |
| case bcond_op: |
| switch (insn.i_format.rt) { |
| case bltz_op: |
| case bltzl_op: |
| if ((long)arch->gprs[insn.i_format.rs] < 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case bgez_op: |
| case bgezl_op: |
| if ((long)arch->gprs[insn.i_format.rs] >= 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case bltzal_op: |
| case bltzall_op: |
| arch->gprs[31] = epc + 8; |
| if ((long)arch->gprs[insn.i_format.rs] < 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case bgezal_op: |
| case bgezall_op: |
| arch->gprs[31] = epc + 8; |
| if ((long)arch->gprs[insn.i_format.rs] >= 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| case bposge32_op: |
| if (!cpu_has_dsp) { |
| kvm_err("%s: DSP branch but not DSP ASE\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| dspcontrol = rddsp(0x01); |
| |
| if (dspcontrol >= 32) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| /* These are unconditional and in j_format. */ |
| case jal_op: |
| arch->gprs[31] = instpc + 8; |
| case j_op: |
| epc += 4; |
| epc >>= 28; |
| epc <<= 28; |
| epc |= (insn.j_format.target << 2); |
| nextpc = epc; |
| break; |
| |
| /* These are conditional and in i_format. */ |
| case beq_op: |
| case beql_op: |
| if (arch->gprs[insn.i_format.rs] == |
| arch->gprs[insn.i_format.rt]) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case bne_op: |
| case bnel_op: |
| if (arch->gprs[insn.i_format.rs] != |
| arch->gprs[insn.i_format.rt]) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case blez_op: /* POP06 */ |
| #ifndef CONFIG_CPU_MIPSR6 |
| case blezl_op: /* removed in R6 */ |
| #endif |
| if (insn.i_format.rt != 0) |
| goto compact_branch; |
| if ((long)arch->gprs[insn.i_format.rs] <= 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| case bgtz_op: /* POP07 */ |
| #ifndef CONFIG_CPU_MIPSR6 |
| case bgtzl_op: /* removed in R6 */ |
| #endif |
| if (insn.i_format.rt != 0) |
| goto compact_branch; |
| if ((long)arch->gprs[insn.i_format.rs] > 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| nextpc = epc; |
| break; |
| |
| /* And now the FPA/cp1 branch instructions. */ |
| case cop1_op: |
| kvm_err("%s: unsupported cop1_op\n", __func__); |
| return -EINVAL; |
| |
| #ifdef CONFIG_CPU_MIPSR6 |
| /* R6 added the following compact branches with forbidden slots */ |
| case blezl_op: /* POP26 */ |
| case bgtzl_op: /* POP27 */ |
| /* only rt == 0 isn't compact branch */ |
| if (insn.i_format.rt != 0) |
| goto compact_branch; |
| return -EINVAL; |
| case pop10_op: |
| case pop30_op: |
| /* only rs == rt == 0 is reserved, rest are compact branches */ |
| if (insn.i_format.rs != 0 || insn.i_format.rt != 0) |
| goto compact_branch; |
| return -EINVAL; |
| case pop66_op: |
| case pop76_op: |
| /* only rs == 0 isn't compact branch */ |
| if (insn.i_format.rs != 0) |
| goto compact_branch; |
| return -EINVAL; |
| compact_branch: |
| /* |
| * If we've hit an exception on the forbidden slot, then |
| * the branch must not have been taken. |
| */ |
| epc += 8; |
| nextpc = epc; |
| break; |
| #else |
| compact_branch: |
| /* Fall through - Compact branches not supported before R6 */ |
| #endif |
| default: |
| return -EINVAL; |
| } |
| |
| *out = nextpc; |
| return 0; |
| } |
| |
| enum emulation_result update_pc(struct kvm_vcpu *vcpu, u32 cause) |
| { |
| int err; |
| |
| if (cause & CAUSEF_BD) { |
| err = kvm_compute_return_epc(vcpu, vcpu->arch.pc, |
| &vcpu->arch.pc); |
| if (err) |
| return EMULATE_FAIL; |
| } else { |
| vcpu->arch.pc += 4; |
| } |
| |
| kvm_debug("update_pc(): New PC: %#lx\n", vcpu->arch.pc); |
| |
| return EMULATE_DONE; |
| } |
| |
| /** |
| * kvm_get_badinstr() - Get bad instruction encoding. |
| * @opc: Guest pointer to faulting instruction. |
| * @vcpu: KVM VCPU information. |
| * |
| * Gets the instruction encoding of the faulting instruction, using the saved |
| * BadInstr register value if it exists, otherwise falling back to reading guest |
| * memory at @opc. |
| * |
| * Returns: The instruction encoding of the faulting instruction. |
| */ |
| int kvm_get_badinstr(u32 *opc, struct kvm_vcpu *vcpu, u32 *out) |
| { |
| if (cpu_has_badinstr) { |
| *out = vcpu->arch.host_cp0_badinstr; |
| return 0; |
| } else { |
| return kvm_get_inst(opc, vcpu, out); |
| } |
| } |
| |
| /** |
| * kvm_get_badinstrp() - Get bad prior instruction encoding. |
| * @opc: Guest pointer to prior faulting instruction. |
| * @vcpu: KVM VCPU information. |
| * |
| * Gets the instruction encoding of the prior faulting instruction (the branch |
| * containing the delay slot which faulted), using the saved BadInstrP register |
| * value if it exists, otherwise falling back to reading guest memory at @opc. |
| * |
| * Returns: The instruction encoding of the prior faulting instruction. |
| */ |
| int kvm_get_badinstrp(u32 *opc, struct kvm_vcpu *vcpu, u32 *out) |
| { |
| if (cpu_has_badinstrp) { |
| *out = vcpu->arch.host_cp0_badinstrp; |
| return 0; |
| } else { |
| return kvm_get_inst(opc, vcpu, out); |
| } |
| } |
| |
| /** |
| * kvm_mips_count_disabled() - Find whether the CP0_Count timer is disabled. |
| * @vcpu: Virtual CPU. |
| * |
| * Returns: 1 if the CP0_Count timer is disabled by either the guest |
| * CP0_Cause.DC bit or the count_ctl.DC bit. |
| * 0 otherwise (in which case CP0_Count timer is running). |
| */ |
| int kvm_mips_count_disabled(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| |
| return (vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) || |
| (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC); |
| } |
| |
| /** |
| * kvm_mips_ktime_to_count() - Scale ktime_t to a 32-bit count. |
| * |
| * Caches the dynamic nanosecond bias in vcpu->arch.count_dyn_bias. |
| * |
| * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). |
| */ |
| static u32 kvm_mips_ktime_to_count(struct kvm_vcpu *vcpu, ktime_t now) |
| { |
| s64 now_ns, periods; |
| u64 delta; |
| |
| now_ns = ktime_to_ns(now); |
| delta = now_ns + vcpu->arch.count_dyn_bias; |
| |
| if (delta >= vcpu->arch.count_period) { |
| /* If delta is out of safe range the bias needs adjusting */ |
| periods = div64_s64(now_ns, vcpu->arch.count_period); |
| vcpu->arch.count_dyn_bias = -periods * vcpu->arch.count_period; |
| /* Recalculate delta with new bias */ |
| delta = now_ns + vcpu->arch.count_dyn_bias; |
| } |
| |
| /* |
| * We've ensured that: |
| * delta < count_period |
| * |
| * Therefore the intermediate delta*count_hz will never overflow since |
| * at the boundary condition: |
| * delta = count_period |
| * delta = NSEC_PER_SEC * 2^32 / count_hz |
| * delta * count_hz = NSEC_PER_SEC * 2^32 |
| */ |
| return div_u64(delta * vcpu->arch.count_hz, NSEC_PER_SEC); |
| } |
| |
| /** |
| * kvm_mips_count_time() - Get effective current time. |
| * @vcpu: Virtual CPU. |
| * |
| * Get effective monotonic ktime. This is usually a straightforward ktime_get(), |
| * except when the master disable bit is set in count_ctl, in which case it is |
| * count_resume, i.e. the time that the count was disabled. |
| * |
| * Returns: Effective monotonic ktime for CP0_Count. |
| */ |
| static inline ktime_t kvm_mips_count_time(struct kvm_vcpu *vcpu) |
| { |
| if (unlikely(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC)) |
| return vcpu->arch.count_resume; |
| |
| return ktime_get(); |
| } |
| |
| /** |
| * kvm_mips_read_count_running() - Read the current count value as if running. |
| * @vcpu: Virtual CPU. |
| * @now: Kernel time to read CP0_Count at. |
| * |
| * Returns the current guest CP0_Count register at time @now and handles if the |
| * timer interrupt is pending and hasn't been handled yet. |
| * |
| * Returns: The current value of the guest CP0_Count register. |
| */ |
| static u32 kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| ktime_t expires, threshold; |
| u32 count, compare; |
| int running; |
| |
| /* Calculate the biased and scaled guest CP0_Count */ |
| count = vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now); |
| compare = kvm_read_c0_guest_compare(cop0); |
| |
| /* |
| * Find whether CP0_Count has reached the closest timer interrupt. If |
| * not, we shouldn't inject it. |
| */ |
| if ((s32)(count - compare) < 0) |
| return count; |
| |
| /* |
| * The CP0_Count we're going to return has already reached the closest |
| * timer interrupt. Quickly check if it really is a new interrupt by |
| * looking at whether the interval until the hrtimer expiry time is |
| * less than 1/4 of the timer period. |
| */ |
| expires = hrtimer_get_expires(&vcpu->arch.comparecount_timer); |
| threshold = ktime_add_ns(now, vcpu->arch.count_period / 4); |
| if (ktime_before(expires, threshold)) { |
| /* |
| * Cancel it while we handle it so there's no chance of |
| * interference with the timeout handler. |
| */ |
| running = hrtimer_cancel(&vcpu->arch.comparecount_timer); |
| |
| /* Nothing should be waiting on the timeout */ |
| kvm_mips_callbacks->queue_timer_int(vcpu); |
| |
| /* |
| * Restart the timer if it was running based on the expiry time |
| * we read, so that we don't push it back 2 periods. |
| */ |
| if (running) { |
| expires = ktime_add_ns(expires, |
| vcpu->arch.count_period); |
| hrtimer_start(&vcpu->arch.comparecount_timer, expires, |
| HRTIMER_MODE_ABS); |
| } |
| } |
| |
| return count; |
| } |
| |
| /** |
| * kvm_mips_read_count() - Read the current count value. |
| * @vcpu: Virtual CPU. |
| * |
| * Read the current guest CP0_Count value, taking into account whether the timer |
| * is stopped. |
| * |
| * Returns: The current guest CP0_Count value. |
| */ |
| u32 kvm_mips_read_count(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| |
| /* If count disabled just read static copy of count */ |
| if (kvm_mips_count_disabled(vcpu)) |
| return kvm_read_c0_guest_count(cop0); |
| |
| return kvm_mips_read_count_running(vcpu, ktime_get()); |
| } |
| |
| /** |
| * kvm_mips_freeze_hrtimer() - Safely stop the hrtimer. |
| * @vcpu: Virtual CPU. |
| * @count: Output pointer for CP0_Count value at point of freeze. |
| * |
| * Freeze the hrtimer safely and return both the ktime and the CP0_Count value |
| * at the point it was frozen. It is guaranteed that any pending interrupts at |
| * the point it was frozen are handled, and none after that point. |
| * |
| * This is useful where the time/CP0_Count is needed in the calculation of the |
| * new parameters. |
| * |
| * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). |
| * |
| * Returns: The ktime at the point of freeze. |
| */ |
| ktime_t kvm_mips_freeze_hrtimer(struct kvm_vcpu *vcpu, u32 *count) |
| { |
| ktime_t now; |
| |
| /* stop hrtimer before finding time */ |
| hrtimer_cancel(&vcpu->arch.comparecount_timer); |
| now = ktime_get(); |
| |
| /* find count at this point and handle pending hrtimer */ |
| *count = kvm_mips_read_count_running(vcpu, now); |
| |
| return now; |
| } |
| |
| /** |
| * kvm_mips_resume_hrtimer() - Resume hrtimer, updating expiry. |
| * @vcpu: Virtual CPU. |
| * @now: ktime at point of resume. |
| * @count: CP0_Count at point of resume. |
| * |
| * Resumes the timer and updates the timer expiry based on @now and @count. |
| * This can be used in conjunction with kvm_mips_freeze_timer() when timer |
| * parameters need to be changed. |
| * |
| * It is guaranteed that a timer interrupt immediately after resume will be |
| * handled, but not if CP_Compare is exactly at @count. That case is already |
| * handled by kvm_mips_freeze_timer(). |
| * |
| * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). |
| */ |
| static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu, |
| ktime_t now, u32 count) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| u32 compare; |
| u64 delta; |
| ktime_t expire; |
| |
| /* Calculate timeout (wrap 0 to 2^32) */ |
| compare = kvm_read_c0_guest_compare(cop0); |
| delta = (u64)(u32)(compare - count - 1) + 1; |
| delta = div_u64(delta * NSEC_PER_SEC, vcpu->arch.count_hz); |
| expire = ktime_add_ns(now, delta); |
| |
| /* Update hrtimer to use new timeout */ |
| hrtimer_cancel(&vcpu->arch.comparecount_timer); |
| hrtimer_start(&vcpu->arch.comparecount_timer, expire, HRTIMER_MODE_ABS); |
| } |
| |
| /** |
| * kvm_mips_restore_hrtimer() - Restore hrtimer after a gap, updating expiry. |
| * @vcpu: Virtual CPU. |
| * @before: Time before Count was saved, lower bound of drift calculation. |
| * @count: CP0_Count at point of restore. |
| * @min_drift: Minimum amount of drift permitted before correction. |
| * Must be <= 0. |
| * |
| * Restores the timer from a particular @count, accounting for drift. This can |
| * be used in conjunction with kvm_mips_freeze_timer() when a hardware timer is |
| * to be used for a period of time, but the exact ktime corresponding to the |
| * final Count that must be restored is not known. |
| * |
| * It is gauranteed that a timer interrupt immediately after restore will be |
| * handled, but not if CP0_Compare is exactly at @count. That case should |
| * already be handled when the hardware timer state is saved. |
| * |
| * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is not |
| * stopped). |
| * |
| * Returns: Amount of correction to count_bias due to drift. |
| */ |
| int kvm_mips_restore_hrtimer(struct kvm_vcpu *vcpu, ktime_t before, |
| u32 count, int min_drift) |
| { |
| ktime_t now, count_time; |
| u32 now_count, before_count; |
| u64 delta; |
| int drift, ret = 0; |
| |
| /* Calculate expected count at before */ |
| before_count = vcpu->arch.count_bias + |
| kvm_mips_ktime_to_count(vcpu, before); |
| |
| /* |
| * Detect significantly negative drift, where count is lower than |
| * expected. Some negative drift is expected when hardware counter is |
| * set after kvm_mips_freeze_timer(), and it is harmless to allow the |
| * time to jump forwards a little, within reason. If the drift is too |
| * significant, adjust the bias to avoid a big Guest.CP0_Count jump. |
| */ |
| drift = count - before_count; |
| if (drift < min_drift) { |
| count_time = before; |
| vcpu->arch.count_bias += drift; |
| ret = drift; |
| goto resume; |
| } |
| |
| /* Calculate expected count right now */ |
| now = ktime_get(); |
| now_count = vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now); |
| |
| /* |
| * Detect positive drift, where count is higher than expected, and |
| * adjust the bias to avoid guest time going backwards. |
| */ |
| drift = count - now_count; |
| if (drift > 0) { |
| count_time = now; |
| vcpu->arch.count_bias += drift; |
| ret = drift; |
| goto resume; |
| } |
| |
| /* Subtract nanosecond delta to find ktime when count was read */ |
| delta = (u64)(u32)(now_count - count); |
| delta = div_u64(delta * NSEC_PER_SEC, vcpu->arch.count_hz); |
| count_time = ktime_sub_ns(now, delta); |
| |
| resume: |
| /* Resume using the calculated ktime */ |
| kvm_mips_resume_hrtimer(vcpu, count_time, count); |
| return ret; |
| } |
| |
| /** |
| * kvm_mips_write_count() - Modify the count and update timer. |
| * @vcpu: Virtual CPU. |
| * @count: Guest CP0_Count value to set. |
| * |
| * Sets the CP0_Count value and updates the timer accordingly. |
| */ |
| void kvm_mips_write_count(struct kvm_vcpu *vcpu, u32 count) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| ktime_t now; |
| |
| /* Calculate bias */ |
| now = kvm_mips_count_time(vcpu); |
| vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now); |
| |
| if (kvm_mips_count_disabled(vcpu)) |
| /* The timer's disabled, adjust the static count */ |
| kvm_write_c0_guest_count(cop0, count); |
| else |
| /* Update timeout */ |
| kvm_mips_resume_hrtimer(vcpu, now, count); |
| } |
| |
| /** |
| * kvm_mips_init_count() - Initialise timer. |
| * @vcpu: Virtual CPU. |
| * @count_hz: Frequency of timer. |
| * |
| * Initialise the timer to the specified frequency, zero it, and set it going if |
| * it's enabled. |
| */ |
| void kvm_mips_init_count(struct kvm_vcpu *vcpu, unsigned long count_hz) |
| { |
| vcpu->arch.count_hz = count_hz; |
| vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32, count_hz); |
| vcpu->arch.count_dyn_bias = 0; |
| |
| /* Starting at 0 */ |
| kvm_mips_write_count(vcpu, 0); |
| } |
| |
| /** |
| * kvm_mips_set_count_hz() - Update the frequency of the timer. |
| * @vcpu: Virtual CPU. |
| * @count_hz: Frequency of CP0_Count timer in Hz. |
| * |
| * Change the frequency of the CP0_Count timer. This is done atomically so that |
| * CP0_Count is continuous and no timer interrupt is lost. |
| * |
| * Returns: -EINVAL if @count_hz is out of range. |
| * 0 on success. |
| */ |
| int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| int dc; |
| ktime_t now; |
| u32 count; |
| |
| /* ensure the frequency is in a sensible range... */ |
| if (count_hz <= 0 || count_hz > NSEC_PER_SEC) |
| return -EINVAL; |
| /* ... and has actually changed */ |
| if (vcpu->arch.count_hz == count_hz) |
| return 0; |
| |
| /* Safely freeze timer so we can keep it continuous */ |
| dc = kvm_mips_count_disabled(vcpu); |
| if (dc) { |
| now = kvm_mips_count_time(vcpu); |
| count = kvm_read_c0_guest_count(cop0); |
| } else { |
| now = kvm_mips_freeze_hrtimer(vcpu, &count); |
| } |
| |
| /* Update the frequency */ |
| vcpu->arch.count_hz = count_hz; |
| vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32, count_hz); |
| vcpu->arch.count_dyn_bias = 0; |
| |
| /* Calculate adjusted bias so dynamic count is unchanged */ |
| vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now); |
| |
| /* Update and resume hrtimer */ |
| if (!dc) |
| kvm_mips_resume_hrtimer(vcpu, now, count); |
| return 0; |
| } |
| |
| /** |
| * kvm_mips_write_compare() - Modify compare and update timer. |
| * @vcpu: Virtual CPU. |
| * @compare: New CP0_Compare value. |
| * @ack: Whether to acknowledge timer interrupt. |
| * |
| * Update CP0_Compare to a new value and update the timeout. |
| * If @ack, atomically acknowledge any pending timer interrupt, otherwise ensure |
| * any pending timer interrupt is preserved. |
| */ |
| void kvm_mips_write_compare(struct kvm_vcpu *vcpu, u32 compare, bool ack) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| int dc; |
| u32 old_compare = kvm_read_c0_guest_compare(cop0); |
| s32 delta = compare - old_compare; |
| u32 cause; |
| ktime_t now = ktime_set(0, 0); /* silence bogus GCC warning */ |
| u32 count; |
| |
| /* if unchanged, must just be an ack */ |
| if (old_compare == compare) { |
| if (!ack) |
| return; |
| kvm_mips_callbacks->dequeue_timer_int(vcpu); |
| kvm_write_c0_guest_compare(cop0, compare); |
| return; |
| } |
| |
| /* |
| * If guest CP0_Compare moves forward, CP0_GTOffset should be adjusted |
| * too to prevent guest CP0_Count hitting guest CP0_Compare. |
| * |
| * The new GTOffset corresponds to the new value of CP0_Compare, and is |
| * set prior to it being written into the guest context. We disable |
| * preemption until the new value is written to prevent restore of a |
| * GTOffset corresponding to the old CP0_Compare value. |
| */ |
| if (IS_ENABLED(CONFIG_KVM_MIPS_VZ) && delta > 0) { |
| preempt_disable(); |
| write_c0_gtoffset(compare - read_c0_count()); |
| back_to_back_c0_hazard(); |
| } |
| |
| /* freeze_hrtimer() takes care of timer interrupts <= count */ |
| dc = kvm_mips_count_disabled(vcpu); |
| if (!dc) |
| now = kvm_mips_freeze_hrtimer(vcpu, &count); |
| |
| if (ack) |
| kvm_mips_callbacks->dequeue_timer_int(vcpu); |
| else if (IS_ENABLED(CONFIG_KVM_MIPS_VZ)) |
| /* |
| * With VZ, writing CP0_Compare acks (clears) CP0_Cause.TI, so |
| * preserve guest CP0_Cause.TI if we don't want to ack it. |
| */ |
| cause = kvm_read_c0_guest_cause(cop0); |
| |
| kvm_write_c0_guest_compare(cop0, compare); |
| |
| if (IS_ENABLED(CONFIG_KVM_MIPS_VZ)) { |
| if (delta > 0) |
| preempt_enable(); |
| |
| back_to_back_c0_hazard(); |
| |
| if (!ack && cause & CAUSEF_TI) |
| kvm_write_c0_guest_cause(cop0, cause); |
| } |
| |
| /* resume_hrtimer() takes care of timer interrupts > count */ |
| if (!dc) |
| kvm_mips_resume_hrtimer(vcpu, now, count); |
| |
| /* |
| * If guest CP0_Compare is moving backward, we delay CP0_GTOffset change |
| * until after the new CP0_Compare is written, otherwise new guest |
| * CP0_Count could hit new guest CP0_Compare. |
| */ |
| if (IS_ENABLED(CONFIG_KVM_MIPS_VZ) && delta <= 0) |
| write_c0_gtoffset(compare - read_c0_count()); |
| } |
| |
| /** |
| * kvm_mips_count_disable() - Disable count. |
| * @vcpu: Virtual CPU. |
| * |
| * Disable the CP0_Count timer. A timer interrupt on or before the final stop |
| * time will be handled but not after. |
| * |
| * Assumes CP0_Count was previously enabled but now Guest.CP0_Cause.DC or |
| * count_ctl.DC has been set (count disabled). |
| * |
| * Returns: The time that the timer was stopped. |
| */ |
| static ktime_t kvm_mips_count_disable(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| u32 count; |
| ktime_t now; |
| |
| /* Stop hrtimer */ |
| hrtimer_cancel(&vcpu->arch.comparecount_timer); |
| |
| /* Set the static count from the dynamic count, handling pending TI */ |
| now = ktime_get(); |
| count = kvm_mips_read_count_running(vcpu, now); |
| kvm_write_c0_guest_count(cop0, count); |
| |
| return now; |
| } |
| |
| /** |
| * kvm_mips_count_disable_cause() - Disable count using CP0_Cause.DC. |
| * @vcpu: Virtual CPU. |
| * |
| * Disable the CP0_Count timer and set CP0_Cause.DC. A timer interrupt on or |
| * before the final stop time will be handled if the timer isn't disabled by |
| * count_ctl.DC, but not after. |
| * |
| * Assumes CP0_Cause.DC is clear (count enabled). |
| */ |
| void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| |
| kvm_set_c0_guest_cause(cop0, CAUSEF_DC); |
| if (!(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC)) |
| kvm_mips_count_disable(vcpu); |
| } |
| |
| /** |
| * kvm_mips_count_enable_cause() - Enable count using CP0_Cause.DC. |
| * @vcpu: Virtual CPU. |
| * |
| * Enable the CP0_Count timer and clear CP0_Cause.DC. A timer interrupt after |
| * the start time will be handled if the timer isn't disabled by count_ctl.DC, |
| * potentially before even returning, so the caller should be careful with |
| * ordering of CP0_Cause modifications so as not to lose it. |
| * |
| * Assumes CP0_Cause.DC is set (count disabled). |
| */ |
| void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| u32 count; |
| |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_DC); |
| |
| /* |
| * Set the dynamic count to match the static count. |
| * This starts the hrtimer if count_ctl.DC allows it. |
| * Otherwise it conveniently updates the biases. |
| */ |
| count = kvm_read_c0_guest_count(cop0); |
| kvm_mips_write_count(vcpu, count); |
| } |
| |
| /** |
| * kvm_mips_set_count_ctl() - Update the count control KVM register. |
| * @vcpu: Virtual CPU. |
| * @count_ctl: Count control register new value. |
| * |
| * Set the count control KVM register. The timer is updated accordingly. |
| * |
| * Returns: -EINVAL if reserved bits are set. |
| * 0 on success. |
| */ |
| int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| s64 changed = count_ctl ^ vcpu->arch.count_ctl; |
| s64 delta; |
| ktime_t expire, now; |
| u32 count, compare; |
| |
| /* Only allow defined bits to be changed */ |
| if (changed & ~(s64)(KVM_REG_MIPS_COUNT_CTL_DC)) |
| return -EINVAL; |
| |
| /* Apply new value */ |
| vcpu->arch.count_ctl = count_ctl; |
| |
| /* Master CP0_Count disable */ |
| if (changed & KVM_REG_MIPS_COUNT_CTL_DC) { |
| /* Is CP0_Cause.DC already disabling CP0_Count? */ |
| if (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC) { |
| if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) |
| /* Just record the current time */ |
| vcpu->arch.count_resume = ktime_get(); |
| } else if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) { |
| /* disable timer and record current time */ |
| vcpu->arch.count_resume = kvm_mips_count_disable(vcpu); |
| } else { |
| /* |
| * Calculate timeout relative to static count at resume |
| * time (wrap 0 to 2^32). |
| */ |
| count = kvm_read_c0_guest_count(cop0); |
| compare = kvm_read_c0_guest_compare(cop0); |
| delta = (u64)(u32)(compare - count - 1) + 1; |
| delta = div_u64(delta * NSEC_PER_SEC, |
| vcpu->arch.count_hz); |
| expire = ktime_add_ns(vcpu->arch.count_resume, delta); |
| |
| /* Handle pending interrupt */ |
| now = ktime_get(); |
| if (ktime_compare(now, expire) >= 0) |
| /* Nothing should be waiting on the timeout */ |
| kvm_mips_callbacks->queue_timer_int(vcpu); |
| |
| /* Resume hrtimer without changing bias */ |
| count = kvm_mips_read_count_running(vcpu, now); |
| kvm_mips_resume_hrtimer(vcpu, now, count); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * kvm_mips_set_count_resume() - Update the count resume KVM register. |
| * @vcpu: Virtual CPU. |
| * @count_resume: Count resume register new value. |
| * |
| * Set the count resume KVM register. |
| * |
| * Returns: -EINVAL if out of valid range (0..now). |
| * 0 on success. |
| */ |
| int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume) |
| { |
| /* |
| * It doesn't make sense for the resume time to be in the future, as it |
| * would be possible for the next interrupt to be more than a full |
| * period in the future. |
| */ |
| if (count_resume < 0 || count_resume > ktime_to_ns(ktime_get())) |
| return -EINVAL; |
| |
| vcpu->arch.count_resume = ns_to_ktime(count_resume); |
| return 0; |
| } |
| |
| /** |
| * kvm_mips_count_timeout() - Push timer forward on timeout. |
| * @vcpu: Virtual CPU. |
| * |
| * Handle an hrtimer event by push the hrtimer forward a period. |
| * |
| * Returns: The hrtimer_restart value to return to the hrtimer subsystem. |
| */ |
| enum hrtimer_restart kvm_mips_count_timeout(struct kvm_vcpu *vcpu) |
| { |
| /* Add the Count period to the current expiry time */ |
| hrtimer_add_expires_ns(&vcpu->arch.comparecount_timer, |
| vcpu->arch.count_period); |
| return HRTIMER_RESTART; |
| } |
| |
| enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if (kvm_read_c0_guest_status(cop0) & ST0_ERL) { |
| kvm_clear_c0_guest_status(cop0, ST0_ERL); |
| vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0); |
| } else if (kvm_read_c0_guest_status(cop0) & ST0_EXL) { |
| kvm_debug("[%#lx] ERET to %#lx\n", vcpu->arch.pc, |
| kvm_read_c0_guest_epc(cop0)); |
| kvm_clear_c0_guest_status(cop0, ST0_EXL); |
| vcpu->arch.pc = kvm_read_c0_guest_epc(cop0); |
| |
| } else { |
| kvm_err("[%#lx] ERET when MIPS_SR_EXL|MIPS_SR_ERL == 0\n", |
| vcpu->arch.pc); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emul_wait(struct kvm_vcpu *vcpu) |
| { |
| kvm_debug("[%#lx] !!!WAIT!!! (%#lx)\n", vcpu->arch.pc, |
| vcpu->arch.pending_exceptions); |
| |
| ++vcpu->stat.wait_exits; |
| trace_kvm_exit(vcpu, KVM_TRACE_EXIT_WAIT); |
| if (!vcpu->arch.pending_exceptions) { |
| kvm_vz_lose_htimer(vcpu); |
| vcpu->arch.wait = 1; |
| kvm_vcpu_block(vcpu); |
| |
| /* |
| * We we are runnable, then definitely go off to user space to |
| * check if any I/O interrupts are pending. |
| */ |
| if (kvm_check_request(KVM_REQ_UNHALT, vcpu)) { |
| kvm_clear_request(KVM_REQ_UNHALT, vcpu); |
| vcpu->run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN; |
| } |
| } |
| |
| return EMULATE_DONE; |
| } |
| |
| static void kvm_mips_change_entryhi(struct kvm_vcpu *vcpu, |
| unsigned long entryhi) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct mm_struct *kern_mm = &vcpu->arch.guest_kernel_mm; |
| int cpu, i; |
| u32 nasid = entryhi & KVM_ENTRYHI_ASID; |
| |
| if (((kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID) != nasid)) { |
| trace_kvm_asid_change(vcpu, kvm_read_c0_guest_entryhi(cop0) & |
| KVM_ENTRYHI_ASID, nasid); |
| |
| /* |
| * Flush entries from the GVA page tables. |
| * Guest user page table will get flushed lazily on re-entry to |
| * guest user if the guest ASID actually changes. |
| */ |
| kvm_mips_flush_gva_pt(kern_mm->pgd, KMF_KERN); |
| |
| /* |
| * Regenerate/invalidate kernel MMU context. |
| * The user MMU context will be regenerated lazily on re-entry |
| * to guest user if the guest ASID actually changes. |
| */ |
| preempt_disable(); |
| cpu = smp_processor_id(); |
| get_new_mmu_context(kern_mm, cpu); |
| for_each_possible_cpu(i) |
| if (i != cpu) |
| cpu_context(i, kern_mm) = 0; |
| preempt_enable(); |
| } |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| } |
| |
| enum emulation_result kvm_mips_emul_tlbr(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_mips_tlb *tlb; |
| unsigned long pc = vcpu->arch.pc; |
| int index; |
| |
| index = kvm_read_c0_guest_index(cop0); |
| if (index < 0 || index >= KVM_MIPS_GUEST_TLB_SIZE) { |
| /* UNDEFINED */ |
| kvm_debug("[%#lx] TLBR Index %#x out of range\n", pc, index); |
| index &= KVM_MIPS_GUEST_TLB_SIZE - 1; |
| } |
| |
| tlb = &vcpu->arch.guest_tlb[index]; |
| kvm_write_c0_guest_pagemask(cop0, tlb->tlb_mask); |
| kvm_write_c0_guest_entrylo0(cop0, tlb->tlb_lo[0]); |
| kvm_write_c0_guest_entrylo1(cop0, tlb->tlb_lo[1]); |
| kvm_mips_change_entryhi(vcpu, tlb->tlb_hi); |
| |
| return EMULATE_DONE; |
| } |
| |
| /** |
| * kvm_mips_invalidate_guest_tlb() - Indicates a change in guest MMU map. |
| * @vcpu: VCPU with changed mappings. |
| * @tlb: TLB entry being removed. |
| * |
| * This is called to indicate a single change in guest MMU mappings, so that we |
| * can arrange TLB flushes on this and other CPUs. |
| */ |
| static void kvm_mips_invalidate_guest_tlb(struct kvm_vcpu *vcpu, |
| struct kvm_mips_tlb *tlb) |
| { |
| struct mm_struct *kern_mm = &vcpu->arch.guest_kernel_mm; |
| struct mm_struct *user_mm = &vcpu->arch.guest_user_mm; |
| int cpu, i; |
| bool user; |
| |
| /* No need to flush for entries which are already invalid */ |
| if (!((tlb->tlb_lo[0] | tlb->tlb_lo[1]) & ENTRYLO_V)) |
| return; |
| /* Don't touch host kernel page tables or TLB mappings */ |
| if ((unsigned long)tlb->tlb_hi > 0x7fffffff) |
| return; |
| /* User address space doesn't need flushing for KSeg2/3 changes */ |
| user = tlb->tlb_hi < KVM_GUEST_KSEG0; |
| |
| preempt_disable(); |
| |
| /* Invalidate page table entries */ |
| kvm_trap_emul_invalidate_gva(vcpu, tlb->tlb_hi & VPN2_MASK, user); |
| |
| /* |
| * Probe the shadow host TLB for the entry being overwritten, if one |
| * matches, invalidate it |
| */ |
| kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi, user, true); |
| |
| /* Invalidate the whole ASID on other CPUs */ |
| cpu = smp_processor_id(); |
| for_each_possible_cpu(i) { |
| if (i == cpu) |
| continue; |
| if (user) |
| cpu_context(i, user_mm) = 0; |
| cpu_context(i, kern_mm) = 0; |
| } |
| |
| preempt_enable(); |
| } |
| |
| /* Write Guest TLB Entry @ Index */ |
| enum emulation_result kvm_mips_emul_tlbwi(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| int index = kvm_read_c0_guest_index(cop0); |
| struct kvm_mips_tlb *tlb = NULL; |
| unsigned long pc = vcpu->arch.pc; |
| |
| if (index < 0 || index >= KVM_MIPS_GUEST_TLB_SIZE) { |
| kvm_debug("%s: illegal index: %d\n", __func__, index); |
| kvm_debug("[%#lx] COP0_TLBWI [%d] (entryhi: %#lx, entrylo0: %#lx entrylo1: %#lx, mask: %#lx)\n", |
| pc, index, kvm_read_c0_guest_entryhi(cop0), |
| kvm_read_c0_guest_entrylo0(cop0), |
| kvm_read_c0_guest_entrylo1(cop0), |
| kvm_read_c0_guest_pagemask(cop0)); |
| index = (index & ~0x80000000) % KVM_MIPS_GUEST_TLB_SIZE; |
| } |
| |
| tlb = &vcpu->arch.guest_tlb[index]; |
| |
| kvm_mips_invalidate_guest_tlb(vcpu, tlb); |
| |
| tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0); |
| tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0); |
| tlb->tlb_lo[0] = kvm_read_c0_guest_entrylo0(cop0); |
| tlb->tlb_lo[1] = kvm_read_c0_guest_entrylo1(cop0); |
| |
| kvm_debug("[%#lx] COP0_TLBWI [%d] (entryhi: %#lx, entrylo0: %#lx entrylo1: %#lx, mask: %#lx)\n", |
| pc, index, kvm_read_c0_guest_entryhi(cop0), |
| kvm_read_c0_guest_entrylo0(cop0), |
| kvm_read_c0_guest_entrylo1(cop0), |
| kvm_read_c0_guest_pagemask(cop0)); |
| |
| return EMULATE_DONE; |
| } |
| |
| /* Write Guest TLB Entry @ Random Index */ |
| enum emulation_result kvm_mips_emul_tlbwr(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_mips_tlb *tlb = NULL; |
| unsigned long pc = vcpu->arch.pc; |
| int index; |
| |
| get_random_bytes(&index, sizeof(index)); |
| index &= (KVM_MIPS_GUEST_TLB_SIZE - 1); |
| |
| tlb = &vcpu->arch.guest_tlb[index]; |
| |
| kvm_mips_invalidate_guest_tlb(vcpu, tlb); |
| |
| tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0); |
| tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0); |
| tlb->tlb_lo[0] = kvm_read_c0_guest_entrylo0(cop0); |
| tlb->tlb_lo[1] = kvm_read_c0_guest_entrylo1(cop0); |
| |
| kvm_debug("[%#lx] COP0_TLBWR[%d] (entryhi: %#lx, entrylo0: %#lx entrylo1: %#lx)\n", |
| pc, index, kvm_read_c0_guest_entryhi(cop0), |
| kvm_read_c0_guest_entrylo0(cop0), |
| kvm_read_c0_guest_entrylo1(cop0)); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emul_tlbp(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| long entryhi = kvm_read_c0_guest_entryhi(cop0); |
| unsigned long pc = vcpu->arch.pc; |
| int index = -1; |
| |
| index = kvm_mips_guest_tlb_lookup(vcpu, entryhi); |
| |
| kvm_write_c0_guest_index(cop0, index); |
| |
| kvm_debug("[%#lx] COP0_TLBP (entryhi: %#lx), index: %d\n", pc, entryhi, |
| index); |
| |
| return EMULATE_DONE; |
| } |
| |
| /** |
| * kvm_mips_config1_wrmask() - Find mask of writable bits in guest Config1 |
| * @vcpu: Virtual CPU. |
| * |
| * Finds the mask of bits which are writable in the guest's Config1 CP0 |
| * register, by userland (currently read-only to the guest). |
| */ |
| unsigned int kvm_mips_config1_wrmask(struct kvm_vcpu *vcpu) |
| { |
| unsigned int mask = 0; |
| |
| /* Permit FPU to be present if FPU is supported */ |
| if (kvm_mips_guest_can_have_fpu(&vcpu->arch)) |
| mask |= MIPS_CONF1_FP; |
| |
| return mask; |
| } |
| |
| /** |
| * kvm_mips_config3_wrmask() - Find mask of writable bits in guest Config3 |
| * @vcpu: Virtual CPU. |
| * |
| * Finds the mask of bits which are writable in the guest's Config3 CP0 |
| * register, by userland (currently read-only to the guest). |
| */ |
| unsigned int kvm_mips_config3_wrmask(struct kvm_vcpu *vcpu) |
| { |
| /* Config4 and ULRI are optional */ |
| unsigned int mask = MIPS_CONF_M | MIPS_CONF3_ULRI; |
| |
| /* Permit MSA to be present if MSA is supported */ |
| if (kvm_mips_guest_can_have_msa(&vcpu->arch)) |
| mask |= MIPS_CONF3_MSA; |
| |
| return mask; |
| } |
| |
| /** |
| * kvm_mips_config4_wrmask() - Find mask of writable bits in guest Config4 |
| * @vcpu: Virtual CPU. |
| * |
| * Finds the mask of bits which are writable in the guest's Config4 CP0 |
| * register, by userland (currently read-only to the guest). |
| */ |
| unsigned int kvm_mips_config4_wrmask(struct kvm_vcpu *vcpu) |
| { |
| /* Config5 is optional */ |
| unsigned int mask = MIPS_CONF_M; |
| |
| /* KScrExist */ |
| mask |= 0xfc << MIPS_CONF4_KSCREXIST_SHIFT; |
| |
| return mask; |
| } |
| |
| /** |
| * kvm_mips_config5_wrmask() - Find mask of writable bits in guest Config5 |
| * @vcpu: Virtual CPU. |
| * |
| * Finds the mask of bits which are writable in the guest's Config5 CP0 |
| * register, by the guest itself. |
| */ |
| unsigned int kvm_mips_config5_wrmask(struct kvm_vcpu *vcpu) |
| { |
| unsigned int mask = 0; |
| |
| /* Permit MSAEn changes if MSA supported and enabled */ |
| if (kvm_mips_guest_has_msa(&vcpu->arch)) |
| mask |= MIPS_CONF5_MSAEN; |
| |
| /* |
| * Permit guest FPU mode changes if FPU is enabled and the relevant |
| * feature exists according to FIR register. |
| */ |
| if (kvm_mips_guest_has_fpu(&vcpu->arch)) { |
| if (cpu_has_fre) |
| mask |= MIPS_CONF5_FRE; |
| /* We don't support UFR or UFE */ |
| } |
| |
| return mask; |
| } |
| |
| enum emulation_result kvm_mips_emulate_CP0(union mips_instruction inst, |
| u32 *opc, u32 cause, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| enum emulation_result er = EMULATE_DONE; |
| u32 rt, rd, sel; |
| unsigned long curr_pc; |
| |
| /* |
| * Update PC and hold onto current PC in case there is |
| * an error and we want to rollback the PC |
| */ |
| curr_pc = vcpu->arch.pc; |
| er = update_pc(vcpu, cause); |
| if (er == EMULATE_FAIL) |
| return er; |
| |
| if (inst.co_format.co) { |
| switch (inst.co_format.func) { |
| case tlbr_op: /* Read indexed TLB entry */ |
| er = kvm_mips_emul_tlbr(vcpu); |
| break; |
| case tlbwi_op: /* Write indexed */ |
| er = kvm_mips_emul_tlbwi(vcpu); |
| break; |
| case tlbwr_op: /* Write random */ |
| er = kvm_mips_emul_tlbwr(vcpu); |
| break; |
| case tlbp_op: /* TLB Probe */ |
| er = kvm_mips_emul_tlbp(vcpu); |
| break; |
| case rfe_op: |
| kvm_err("!!!COP0_RFE!!!\n"); |
| break; |
| case eret_op: |
| er = kvm_mips_emul_eret(vcpu); |
| goto dont_update_pc; |
| case wait_op: |
| er = kvm_mips_emul_wait(vcpu); |
| break; |
| case hypcall_op: |
| er = kvm_mips_emul_hypcall(vcpu, inst); |
| break; |
| } |
| } else { |
| rt = inst.c0r_format.rt; |
| rd = inst.c0r_format.rd; |
| sel = inst.c0r_format.sel; |
| |
| switch (inst.c0r_format.rs) { |
| case mfc_op: |
| #ifdef CONFIG_KVM_MIPS_DEBUG_COP0_COUNTERS |
| cop0->stat[rd][sel]++; |
| #endif |
| /* Get reg */ |
| if ((rd == MIPS_CP0_COUNT) && (sel == 0)) { |
| vcpu->arch.gprs[rt] = |
| (s32)kvm_mips_read_count(vcpu); |
| } else if ((rd == MIPS_CP0_ERRCTL) && (sel == 0)) { |
| vcpu->arch.gprs[rt] = 0x0; |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| kvm_mips_trans_mfc0(inst, opc, vcpu); |
| #endif |
| } else { |
| vcpu->arch.gprs[rt] = (s32)cop0->reg[rd][sel]; |
| |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| kvm_mips_trans_mfc0(inst, opc, vcpu); |
| #endif |
| } |
| |
| trace_kvm_hwr(vcpu, KVM_TRACE_MFC0, |
| KVM_TRACE_COP0(rd, sel), |
| vcpu->arch.gprs[rt]); |
| break; |
| |
| case dmfc_op: |
| vcpu->arch.gprs[rt] = cop0->reg[rd][sel]; |
| |
| trace_kvm_hwr(vcpu, KVM_TRACE_DMFC0, |
| KVM_TRACE_COP0(rd, sel), |
| vcpu->arch.gprs[rt]); |
| break; |
| |
| case mtc_op: |
| #ifdef CONFIG_KVM_MIPS_DEBUG_COP0_COUNTERS |
| cop0->stat[rd][sel]++; |
| #endif |
| trace_kvm_hwr(vcpu, KVM_TRACE_MTC0, |
| KVM_TRACE_COP0(rd, sel), |
| vcpu->arch.gprs[rt]); |
| |
| if ((rd == MIPS_CP0_TLB_INDEX) |
| && (vcpu->arch.gprs[rt] >= |
| KVM_MIPS_GUEST_TLB_SIZE)) { |
| kvm_err("Invalid TLB Index: %ld", |
| vcpu->arch.gprs[rt]); |
| er = EMULATE_FAIL; |
| break; |
| } |
| if ((rd == MIPS_CP0_PRID) && (sel == 1)) { |
| /* |
| * Preserve core number, and keep the exception |
| * base in guest KSeg0. |
| */ |
| kvm_change_c0_guest_ebase(cop0, 0x1ffff000, |
| vcpu->arch.gprs[rt]); |
| } else if (rd == MIPS_CP0_TLB_HI && sel == 0) { |
| kvm_mips_change_entryhi(vcpu, |
| vcpu->arch.gprs[rt]); |
| } |
| /* Are we writing to COUNT */ |
| else if ((rd == MIPS_CP0_COUNT) && (sel == 0)) { |
| kvm_mips_write_count(vcpu, vcpu->arch.gprs[rt]); |
| goto done; |
| } else if ((rd == MIPS_CP0_COMPARE) && (sel == 0)) { |
| /* If we are writing to COMPARE */ |
| /* Clear pending timer interrupt, if any */ |
| kvm_mips_write_compare(vcpu, |
| vcpu->arch.gprs[rt], |
| true); |
| } else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) { |
| unsigned int old_val, val, change; |
| |
| old_val = kvm_read_c0_guest_status(cop0); |
| val = vcpu->arch.gprs[rt]; |
| change = val ^ old_val; |
| |
| /* Make sure that the NMI bit is never set */ |
| val &= ~ST0_NMI; |
| |
| /* |
| * Don't allow CU1 or FR to be set unless FPU |
| * capability enabled and exists in guest |
| * configuration. |
| */ |
| if (!kvm_mips_guest_has_fpu(&vcpu->arch)) |
| val &= ~(ST0_CU1 | ST0_FR); |
| |
| /* |
| * Also don't allow FR to be set if host doesn't |
| * support it. |
| */ |
| if (!(current_cpu_data.fpu_id & MIPS_FPIR_F64)) |
| val &= ~ST0_FR; |
| |
| |
| /* Handle changes in FPU mode */ |
| preempt_disable(); |
| |
| /* |
| * FPU and Vector register state is made |
| * UNPREDICTABLE by a change of FR, so don't |
| * even bother saving it. |
| */ |
| if (change & ST0_FR) |
| kvm_drop_fpu(vcpu); |
| |
| /* |
| * If MSA state is already live, it is undefined |
| * how it interacts with FR=0 FPU state, and we |
| * don't want to hit reserved instruction |
| * exceptions trying to save the MSA state later |
| * when CU=1 && FR=1, so play it safe and save |
| * it first. |
| */ |
| if (change & ST0_CU1 && !(val & ST0_FR) && |
| vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) |
| kvm_lose_fpu(vcpu); |
| |
| /* |
| * Propagate CU1 (FPU enable) changes |
| * immediately if the FPU context is already |
| * loaded. When disabling we leave the context |
| * loaded so it can be quickly enabled again in |
| * the near future. |
| */ |
| if (change & ST0_CU1 && |
| vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) |
| change_c0_status(ST0_CU1, val); |
| |
| preempt_enable(); |
| |
| kvm_write_c0_guest_status(cop0, val); |
| |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| /* |
| * If FPU present, we need CU1/FR bits to take |
| * effect fairly soon. |
| */ |
| if (!kvm_mips_guest_has_fpu(&vcpu->arch)) |
| kvm_mips_trans_mtc0(inst, opc, vcpu); |
| #endif |
| } else if ((rd == MIPS_CP0_CONFIG) && (sel == 5)) { |
| unsigned int old_val, val, change, wrmask; |
| |
| old_val = kvm_read_c0_guest_config5(cop0); |
| val = vcpu->arch.gprs[rt]; |
| |
| /* Only a few bits are writable in Config5 */ |
| wrmask = kvm_mips_config5_wrmask(vcpu); |
| change = (val ^ old_val) & wrmask; |
| val = old_val ^ change; |
| |
| |
| /* Handle changes in FPU/MSA modes */ |
| preempt_disable(); |
| |
| /* |
| * Propagate FRE changes immediately if the FPU |
| * context is already loaded. |
| */ |
| if (change & MIPS_CONF5_FRE && |
| vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) |
| change_c0_config5(MIPS_CONF5_FRE, val); |
| |
| /* |
| * Propagate MSAEn changes immediately if the |
| * MSA context is already loaded. When disabling |
| * we leave the context loaded so it can be |
| * quickly enabled again in the near future. |
| */ |
| if (change & MIPS_CONF5_MSAEN && |
| vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) |
| change_c0_config5(MIPS_CONF5_MSAEN, |
| val); |
| |
| preempt_enable(); |
| |
| kvm_write_c0_guest_config5(cop0, val); |
| } else if ((rd == MIPS_CP0_CAUSE) && (sel == 0)) { |
| u32 old_cause, new_cause; |
| |
| old_cause = kvm_read_c0_guest_cause(cop0); |
| new_cause = vcpu->arch.gprs[rt]; |
| /* Update R/W bits */ |
| kvm_change_c0_guest_cause(cop0, 0x08800300, |
| new_cause); |
| /* DC bit enabling/disabling timer? */ |
| if ((old_cause ^ new_cause) & CAUSEF_DC) { |
| if (new_cause & CAUSEF_DC) |
| kvm_mips_count_disable_cause(vcpu); |
| else |
| kvm_mips_count_enable_cause(vcpu); |
| } |
| } else if ((rd == MIPS_CP0_HWRENA) && (sel == 0)) { |
| u32 mask = MIPS_HWRENA_CPUNUM | |
| MIPS_HWRENA_SYNCISTEP | |
| MIPS_HWRENA_CC | |
| MIPS_HWRENA_CCRES; |
| |
| if (kvm_read_c0_guest_config3(cop0) & |
| MIPS_CONF3_ULRI) |
| mask |= MIPS_HWRENA_ULR; |
| cop0->reg[rd][sel] = vcpu->arch.gprs[rt] & mask; |
| } else { |
| cop0->reg[rd][sel] = vcpu->arch.gprs[rt]; |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| kvm_mips_trans_mtc0(inst, opc, vcpu); |
| #endif |
| } |
| break; |
| |
| case dmtc_op: |
| kvm_err("!!!!!!![%#lx]dmtc_op: rt: %d, rd: %d, sel: %d!!!!!!\n", |
| vcpu->arch.pc, rt, rd, sel); |
| trace_kvm_hwr(vcpu, KVM_TRACE_DMTC0, |
| KVM_TRACE_COP0(rd, sel), |
| vcpu->arch.gprs[rt]); |
| er = EMULATE_FAIL; |
| break; |
| |
| case mfmc0_op: |
| #ifdef KVM_MIPS_DEBUG_COP0_COUNTERS |
| cop0->stat[MIPS_CP0_STATUS][0]++; |
| #endif |
| if (rt != 0) |
| vcpu->arch.gprs[rt] = |
| kvm_read_c0_guest_status(cop0); |
| /* EI */ |
| if (inst.mfmc0_format.sc) { |
| kvm_debug("[%#lx] mfmc0_op: EI\n", |
| vcpu->arch.pc); |
| kvm_set_c0_guest_status(cop0, ST0_IE); |
| } else { |
| kvm_debug("[%#lx] mfmc0_op: DI\n", |
| vcpu->arch.pc); |
| kvm_clear_c0_guest_status(cop0, ST0_IE); |
| } |
| |
| break; |
| |
| case wrpgpr_op: |
| { |
| u32 css = cop0->reg[MIPS_CP0_STATUS][2] & 0xf; |
| u32 pss = |
| (cop0->reg[MIPS_CP0_STATUS][2] >> 6) & 0xf; |
| /* |
| * We don't support any shadow register sets, so |
| * SRSCtl[PSS] == SRSCtl[CSS] = 0 |
| */ |
| if (css || pss) { |
| er = EMULATE_FAIL; |
| break; |
| } |
| kvm_debug("WRPGPR[%d][%d] = %#lx\n", pss, rd, |
| vcpu->arch.gprs[rt]); |
| vcpu->arch.gprs[rd] = vcpu->arch.gprs[rt]; |
| } |
| break; |
| default: |
| kvm_err("[%#lx]MachEmulateCP0: unsupported COP0, copz: 0x%x\n", |
| vcpu->arch.pc, inst.c0r_format.rs); |
| er = EMULATE_FAIL; |
| break; |
| } |
| } |
| |
| done: |
| /* Rollback PC only if emulation was unsuccessful */ |
| if (er == EMULATE_FAIL) |
| vcpu->arch.pc = curr_pc; |
| |
| dont_update_pc: |
| /* |
| * This is for special instructions whose emulation |
| * updates the PC, so do not overwrite the PC under |
| * any circumstances |
| */ |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_store(union mips_instruction inst, |
| u32 cause, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| enum emulation_result er; |
| u32 rt; |
| void *data = run->mmio.data; |
| unsigned long curr_pc; |
| |
| /* |
| * Update PC and hold onto current PC in case there is |
| * an error and we want to rollback the PC |
| */ |
| curr_pc = vcpu->arch.pc; |
| er = update_pc(vcpu, cause); |
| if (er == EMULATE_FAIL) |
| return er; |
| |
| rt = inst.i_format.rt; |
| |
| run->mmio.phys_addr = kvm_mips_callbacks->gva_to_gpa( |
| vcpu->arch.host_cp0_badvaddr); |
| if (run->mmio.phys_addr == KVM_INVALID_ADDR) |
| goto out_fail; |
| |
| switch (inst.i_format.opcode) { |
| #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) |
| case sd_op: |
| run->mmio.len = 8; |
| *(u64 *)data = vcpu->arch.gprs[rt]; |
| |
| kvm_debug("[%#lx] OP_SD: eaddr: %#lx, gpr: %#lx, data: %#llx\n", |
| vcpu->arch.pc, vcpu->arch.host_cp0_badvaddr, |
| vcpu->arch.gprs[rt], *(u64 *)data); |
| break; |
| #endif |
| |
| case sw_op: |
| run->mmio.len = 4; |
| *(u32 *)data = vcpu->arch.gprs[rt]; |
| |
| kvm_debug("[%#lx] OP_SW: eaddr: %#lx, gpr: %#lx, data: %#x\n", |
| vcpu->arch.pc, vcpu->arch.host_cp0_badvaddr, |
| vcpu->arch.gprs[rt], *(u32 *)data); |
| break; |
| |
| case sh_op: |
| run->mmio.len = 2; |
| *(u16 *)data = vcpu->arch.gprs[rt]; |
| |
| kvm_debug("[%#lx] OP_SH: eaddr: %#lx, gpr: %#lx, data: %#x\n", |
| vcpu->arch.pc, vcpu->arch.host_cp0_badvaddr, |
| vcpu->arch.gprs[rt], *(u16 *)data); |
| break; |
| |
| case sb_op: |
| run->mmio.len = 1; |
| *(u8 *)data = vcpu->arch.gprs[rt]; |
| |
| kvm_debug("[%#lx] OP_SB: eaddr: %#lx, gpr: %#lx, data: %#x\n", |
| vcpu->arch.pc, vcpu->arch.host_cp0_badvaddr, |
| vcpu->arch.gprs[rt], *(u8 *)data); |
| break; |
| |
| default: |
| kvm_err("Store not yet supported (inst=0x%08x)\n", |
| inst.word); |
| goto out_fail; |
| } |
| |
| run->mmio.is_write = 1; |
| vcpu->mmio_needed = 1; |
| vcpu->mmio_is_write = 1; |
| return EMULATE_DO_MMIO; |
| |
| out_fail: |
| /* Rollback PC if emulation was unsuccessful */ |
| vcpu->arch.pc = curr_pc; |
| return EMULATE_FAIL; |
| } |
| |
| enum emulation_result kvm_mips_emulate_load(union mips_instruction inst, |
| u32 cause, struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| enum emulation_result er; |
| unsigned long curr_pc; |
| u32 op, rt; |
| |
| rt = inst.i_format.rt; |
| op = inst.i_format.opcode; |
| |
| /* |
| * Find the resume PC now while we have safe and easy access to the |
| * prior branch instruction, and save it for |
| * kvm_mips_complete_mmio_load() to restore later. |
| */ |
| curr_pc = vcpu->arch.pc; |
| er = update_pc(vcpu, cause); |
| if (er == EMULATE_FAIL) |
| return er; |
| vcpu->arch.io_pc = vcpu->arch.pc; |
| vcpu->arch.pc = curr_pc; |
| |
| vcpu->arch.io_gpr = rt; |
| |
| run->mmio.phys_addr = kvm_mips_callbacks->gva_to_gpa( |
| vcpu->arch.host_cp0_badvaddr); |
| if (run->mmio.phys_addr == KVM_INVALID_ADDR) |
| return EMULATE_FAIL; |
| |
| vcpu->mmio_needed = 2; /* signed */ |
| switch (op) { |
| #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) |
| case ld_op: |
| run->mmio.len = 8; |
| break; |
| |
| case lwu_op: |
| vcpu->mmio_needed = 1; /* unsigned */ |
| /* fall through */ |
| #endif |
| case lw_op: |
| run->mmio.len = 4; |
| break; |
| |
| case lhu_op: |
| vcpu->mmio_needed = 1; /* unsigned */ |
| /* fall through */ |
| case lh_op: |
| run->mmio.len = 2; |
| break; |
| |
| case lbu_op: |
| vcpu->mmio_needed = 1; /* unsigned */ |
| /* fall through */ |
| case lb_op: |
| run->mmio.len = 1; |
| break; |
| |
| default: |
| kvm_err("Load not yet supported (inst=0x%08x)\n", |
| inst.word); |
| vcpu->mmio_needed = 0; |
| return EMULATE_FAIL; |
| } |
| |
| run->mmio.is_write = 0; |
| vcpu->mmio_is_write = 0; |
| return EMULATE_DO_MMIO; |
| } |
| |
| #ifndef CONFIG_KVM_MIPS_VZ |
| static enum emulation_result kvm_mips_guest_cache_op(int (*fn)(unsigned long), |
| unsigned long curr_pc, |
| unsigned long addr, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu, |
| u32 cause) |
| { |
| int err; |
| |
| for (;;) { |
| /* Carefully attempt the cache operation */ |
| kvm_trap_emul_gva_lockless_begin(vcpu); |
| err = fn(addr); |
| kvm_trap_emul_gva_lockless_end(vcpu); |
| |
| if (likely(!err)) |
| return EMULATE_DONE; |
| |
| /* |
| * Try to handle the fault and retry, maybe we just raced with a |
| * GVA invalidation. |
| */ |
| switch (kvm_trap_emul_gva_fault(vcpu, addr, false)) { |
| case KVM_MIPS_GVA: |
| case KVM_MIPS_GPA: |
| /* bad virtual or physical address */ |
| return EMULATE_FAIL; |
| case KVM_MIPS_TLB: |
| /* no matching guest TLB */ |
| vcpu->arch.host_cp0_badvaddr = addr; |
| vcpu->arch.pc = curr_pc; |
| kvm_mips_emulate_tlbmiss_ld(cause, NULL, run, vcpu); |
| return EMULATE_EXCEPT; |
| case KVM_MIPS_TLBINV: |
| /* invalid matching guest TLB */ |
| vcpu->arch.host_cp0_badvaddr = addr; |
| vcpu->arch.pc = curr_pc; |
| kvm_mips_emulate_tlbinv_ld(cause, NULL, run, vcpu); |
| return EMULATE_EXCEPT; |
| default: |
| break; |
| }; |
| } |
| } |
| |
| enum emulation_result kvm_mips_emulate_cache(union mips_instruction inst, |
| u32 *opc, u32 cause, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| enum emulation_result er = EMULATE_DONE; |
| u32 cache, op_inst, op, base; |
| s16 offset; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| unsigned long va; |
| unsigned long curr_pc; |
| |
| /* |
| * Update PC and hold onto current PC in case there is |
| * an error and we want to rollback the PC |
| */ |
| curr_pc = vcpu->arch.pc; |
| er = update_pc(vcpu, cause); |
| if (er == EMULATE_FAIL) |
| return er; |
| |
| base = inst.i_format.rs; |
| op_inst = inst.i_format.rt; |
| if (cpu_has_mips_r6) |
| offset = inst.spec3_format.simmediate; |
| else |
| offset = inst.i_format.simmediate; |
| cache = op_inst & CacheOp_Cache; |
| op = op_inst & CacheOp_Op; |
| |
| va = arch->gprs[base] + offset; |
| |
| kvm_debug("CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n", |
| cache, op, base, arch->gprs[base], offset); |
| |
| /* |
| * Treat INDEX_INV as a nop, basically issued by Linux on startup to |
| * invalidate the caches entirely by stepping through all the |
| * ways/indexes |
| */ |
| if (op == Index_Writeback_Inv) { |
| kvm_debug("@ %#lx/%#lx CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n", |
| vcpu->arch.pc, vcpu->arch.gprs[31], cache, op, base, |
| arch->gprs[base], offset); |
| |
| if (cache == Cache_D) { |
| #ifdef CONFIG_CPU_R4K_CACHE_TLB |
| r4k_blast_dcache(); |
| #else |
| switch (boot_cpu_type()) { |
| case CPU_CAVIUM_OCTEON3: |
| /* locally flush icache */ |
| local_flush_icache_range(0, 0); |
| break; |
| default: |
| __flush_cache_all(); |
| break; |
| } |
| #endif |
| } else if (cache == Cache_I) { |
| #ifdef CONFIG_CPU_R4K_CACHE_TLB |
| r4k_blast_icache(); |
| #else |
| switch (boot_cpu_type()) { |
| case CPU_CAVIUM_OCTEON3: |
| /* locally flush icache */ |
| local_flush_icache_range(0, 0); |
| break; |
| default: |
| flush_icache_all(); |
| break; |
| } |
| #endif |
| } else { |
| kvm_err("%s: unsupported CACHE INDEX operation\n", |
| __func__); |
| return EMULATE_FAIL; |
| } |
| |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| kvm_mips_trans_cache_index(inst, opc, vcpu); |
| #endif |
| goto done; |
| } |
| |
| /* XXXKYMA: Only a subset of cache ops are supported, used by Linux */ |
| if (op_inst == Hit_Writeback_Inv_D || op_inst == Hit_Invalidate_D) { |
| /* |
| * Perform the dcache part of icache synchronisation on the |
| * guest's behalf. |
| */ |
| er = kvm_mips_guest_cache_op(protected_writeback_dcache_line, |
| curr_pc, va, run, vcpu, cause); |
| if (er != EMULATE_DONE) |
| goto done; |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| /* |
| * Replace the CACHE instruction, with a SYNCI, not the same, |
| * but avoids a trap |
| */ |
| kvm_mips_trans_cache_va(inst, opc, vcpu); |
| #endif |
| } else if (op_inst == Hit_Invalidate_I) { |
| /* Perform the icache synchronisation on the guest's behalf */ |
| er = kvm_mips_guest_cache_op(protected_writeback_dcache_line, |
| curr_pc, va, run, vcpu, cause); |
| if (er != EMULATE_DONE) |
| goto done; |
| er = kvm_mips_guest_cache_op(protected_flush_icache_line, |
| curr_pc, va, run, vcpu, cause); |
| if (er != EMULATE_DONE) |
| goto done; |
| |
| #ifdef CONFIG_KVM_MIPS_DYN_TRANS |
| /* Replace the CACHE instruction, with a SYNCI */ |
| kvm_mips_trans_cache_va(inst, opc, vcpu); |
| #endif |
| } else { |
| kvm_err("NO-OP CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n", |
| cache, op, base, arch->gprs[base], offset); |
| er = EMULATE_FAIL; |
| } |
| |
| done: |
| /* Rollback PC only if emulation was unsuccessful */ |
| if (er == EMULATE_FAIL) |
| vcpu->arch.pc = curr_pc; |
| /* Guest exception needs guest to resume */ |
| if (er == EMULATE_EXCEPT) |
| er = EMULATE_DONE; |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_inst(u32 cause, u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| union mips_instruction inst; |
| enum emulation_result er = EMULATE_DONE; |
| int err; |
| |
| /* Fetch the instruction. */ |
| if (cause & CAUSEF_BD) |
| opc += 1; |
| err = kvm_get_badinstr(opc, vcpu, &inst.word); |
| if (err) |
| return EMULATE_FAIL; |
| |
| switch (inst.r_format.opcode) { |
| case cop0_op: |
| er = kvm_mips_emulate_CP0(inst, opc, cause, run, vcpu); |
| break; |
| |
| #ifndef CONFIG_CPU_MIPSR6 |
| case cache_op: |
| ++vcpu->stat.cache_exits; |
| trace_kvm_exit(vcpu, KVM_TRACE_EXIT_CACHE); |
| er = kvm_mips_emulate_cache(inst, opc, cause, run, vcpu); |
| break; |
| #else |
| case spec3_op: |
| switch (inst.spec3_format.func) { |
| case cache6_op: |
| ++vcpu->stat.cache_exits; |
| trace_kvm_exit(vcpu, KVM_TRACE_EXIT_CACHE); |
| er = kvm_mips_emulate_cache(inst, opc, cause, run, |
| vcpu); |
| break; |
| default: |
| goto unknown; |
| }; |
| break; |
| unknown: |
| #endif |
| |
| default: |
| kvm_err("Instruction emulation not supported (%p/%#x)\n", opc, |
| inst.word); |
| kvm_arch_vcpu_dump_regs(vcpu); |
| er = EMULATE_FAIL; |
| break; |
| } |
| |
| return er; |
| } |
| #endif /* CONFIG_KVM_MIPS_VZ */ |
| |
| /** |
| * kvm_mips_guest_exception_base() - Find guest exception vector base address. |
| * |
| * Returns: The base address of the current guest exception vector, taking |
| * both Guest.CP0_Status.BEV and Guest.CP0_EBase into account. |
| */ |
| long kvm_mips_guest_exception_base(struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| |
| if (kvm_read_c0_guest_status(cop0) & ST0_BEV) |
| return KVM_GUEST_CKSEG1ADDR(0x1fc00200); |
| else |
| return kvm_read_c0_guest_ebase(cop0) & MIPS_EBASE_BASE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_syscall(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering SYSCALL @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_SYS << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver SYSCALL when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_tlbmiss_ld(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| unsigned long entryhi = (vcpu->arch. host_cp0_badvaddr & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID); |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("[EXL == 0] delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| |
| /* set pc to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x0; |
| |
| } else { |
| kvm_debug("[EXL == 1] delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| } |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_TLBL << CAUSEB_EXCCODE)); |
| |
| /* setup badvaddr, context and entryhi registers for the guest */ |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| /* XXXKYMA: is the context register used by linux??? */ |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_tlbinv_ld(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| unsigned long entryhi = |
| (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID); |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("[EXL == 0] delivering TLB INV @ pc %#lx\n", |
| arch->pc); |
| } else { |
| kvm_debug("[EXL == 1] delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| } |
| |
| /* set pc to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_TLBL << CAUSEB_EXCCODE)); |
| |
| /* setup badvaddr, context and entryhi registers for the guest */ |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| /* XXXKYMA: is the context register used by linux??? */ |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_tlbmiss_st(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID); |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("[EXL == 0] Delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x0; |
| } else { |
| kvm_debug("[EXL == 1] Delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| } |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_TLBS << CAUSEB_EXCCODE)); |
| |
| /* setup badvaddr, context and entryhi registers for the guest */ |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| /* XXXKYMA: is the context register used by linux??? */ |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_tlbinv_st(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID); |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("[EXL == 0] Delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| } else { |
| kvm_debug("[EXL == 1] Delivering TLB MISS @ pc %#lx\n", |
| arch->pc); |
| } |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_TLBS << CAUSEB_EXCCODE)); |
| |
| /* setup badvaddr, context and entryhi registers for the guest */ |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| /* XXXKYMA: is the context register used by linux??? */ |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_tlbmod(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID); |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("[EXL == 0] Delivering TLB MOD @ pc %#lx\n", |
| arch->pc); |
| } else { |
| kvm_debug("[EXL == 1] Delivering TLB MOD @ pc %#lx\n", |
| arch->pc); |
| } |
| |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_MOD << CAUSEB_EXCCODE)); |
| |
| /* setup badvaddr, context and entryhi registers for the guest */ |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| /* XXXKYMA: is the context register used by linux??? */ |
| kvm_write_c0_guest_entryhi(cop0, entryhi); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_fpu_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| } |
| |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_CPU << CAUSEB_EXCCODE)); |
| kvm_change_c0_guest_cause(cop0, (CAUSEF_CE), (0x1 << CAUSEB_CE)); |
| |
| return EMULATE_DONE; |
| } |
| |
| enum emulation_result kvm_mips_emulate_ri_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering RI @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_RI << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver RI when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_bp_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering BP @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_BP << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver BP when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_trap_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering TRAP @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_TR << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver TRAP when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_msafpe_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering MSAFPE @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_MSAFPE << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver MSAFPE when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_fpe_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering FPE @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_FPE << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver FPE when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_emulate_msadis_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_debug("Delivering MSADIS @ pc %#lx\n", arch->pc); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (EXCCODE_MSADIS << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| |
| } else { |
| kvm_err("Trying to deliver MSADIS when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_handle_ri(u32 cause, u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| unsigned long curr_pc; |
| union mips_instruction inst; |
| int err; |
| |
| /* |
| * Update PC and hold onto current PC in case there is |
| * an error and we want to rollback the PC |
| */ |
| curr_pc = vcpu->arch.pc; |
| er = update_pc(vcpu, cause); |
| if (er == EMULATE_FAIL) |
| return er; |
| |
| /* Fetch the instruction. */ |
| if (cause & CAUSEF_BD) |
| opc += 1; |
| err = kvm_get_badinstr(opc, vcpu, &inst.word); |
| if (err) { |
| kvm_err("%s: Cannot get inst @ %p (%d)\n", __func__, opc, err); |
| return EMULATE_FAIL; |
| } |
| |
| if (inst.r_format.opcode == spec3_op && |
| inst.r_format.func == rdhwr_op && |
| inst.r_format.rs == 0 && |
| (inst.r_format.re >> 3) == 0) { |
| int usermode = !KVM_GUEST_KERNEL_MODE(vcpu); |
| int rd = inst.r_format.rd; |
| int rt = inst.r_format.rt; |
| int sel = inst.r_format.re & 0x7; |
| |
| /* If usermode, check RDHWR rd is allowed by guest HWREna */ |
| if (usermode && !(kvm_read_c0_guest_hwrena(cop0) & BIT(rd))) { |
| kvm_debug("RDHWR %#x disallowed by HWREna @ %p\n", |
| rd, opc); |
| goto emulate_ri; |
| } |
| switch (rd) { |
| case MIPS_HWR_CPUNUM: /* CPU number */ |
| arch->gprs[rt] = vcpu->vcpu_id; |
| break; |
| case MIPS_HWR_SYNCISTEP: /* SYNCI length */ |
| arch->gprs[rt] = min(current_cpu_data.dcache.linesz, |
| current_cpu_data.icache.linesz); |
| break; |
| case MIPS_HWR_CC: /* Read count register */ |
| arch->gprs[rt] = (s32)kvm_mips_read_count(vcpu); |
| break; |
| case MIPS_HWR_CCRES: /* Count register resolution */ |
| switch (current_cpu_data.cputype) { |
| case CPU_20KC: |
| case CPU_25KF: |
| arch->gprs[rt] = 1; |
| break; |
| default: |
| arch->gprs[rt] = 2; |
| } |
| break; |
| case MIPS_HWR_ULR: /* Read UserLocal register */ |
| arch->gprs[rt] = kvm_read_c0_guest_userlocal(cop0); |
| break; |
| |
| default: |
| kvm_debug("RDHWR %#x not supported @ %p\n", rd, opc); |
| goto emulate_ri; |
| } |
| |
| trace_kvm_hwr(vcpu, KVM_TRACE_RDHWR, KVM_TRACE_HWR(rd, sel), |
| vcpu->arch.gprs[rt]); |
| } else { |
| kvm_debug("Emulate RI not supported @ %p: %#x\n", |
| opc, inst.word); |
| goto emulate_ri; |
| } |
| |
| return EMULATE_DONE; |
| |
| emulate_ri: |
| /* |
| * Rollback PC (if in branch delay slot then the PC already points to |
| * branch target), and pass the RI exception to the guest OS. |
| */ |
| vcpu->arch.pc = curr_pc; |
| return kvm_mips_emulate_ri_exc(cause, opc, run, vcpu); |
| } |
| |
| enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, |
| struct kvm_run *run) |
| { |
| unsigned long *gpr = &vcpu->arch.gprs[vcpu->arch.io_gpr]; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if (run->mmio.len > sizeof(*gpr)) { |
| kvm_err("Bad MMIO length: %d", run->mmio.len); |
| er = EMULATE_FAIL; |
| goto done; |
| } |
| |
| /* Restore saved resume PC */ |
| vcpu->arch.pc = vcpu->arch.io_pc; |
| |
| switch (run->mmio.len) { |
| case 8: |
| *gpr = *(s64 *)run->mmio.data; |
| break; |
| |
| case 4: |
| if (vcpu->mmio_needed == 2) |
| *gpr = *(s32 *)run->mmio.data; |
| else |
| *gpr = *(u32 *)run->mmio.data; |
| break; |
| |
| case 2: |
| if (vcpu->mmio_needed == 2) |
| *gpr = *(s16 *) run->mmio.data; |
| else |
| *gpr = *(u16 *)run->mmio.data; |
| |
| break; |
| case 1: |
| if (vcpu->mmio_needed == 2) |
| *gpr = *(s8 *) run->mmio.data; |
| else |
| *gpr = *(u8 *) run->mmio.data; |
| break; |
| } |
| |
| done: |
| return er; |
| } |
| |
| static enum emulation_result kvm_mips_emulate_exc(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| u32 exccode = (cause >> CAUSEB_EXCCODE) & 0x1f; |
| struct mips_coproc *cop0 = vcpu->arch.cop0; |
| struct kvm_vcpu_arch *arch = &vcpu->arch; |
| enum emulation_result er = EMULATE_DONE; |
| |
| if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { |
| /* save old pc */ |
| kvm_write_c0_guest_epc(cop0, arch->pc); |
| kvm_set_c0_guest_status(cop0, ST0_EXL); |
| |
| if (cause & CAUSEF_BD) |
| kvm_set_c0_guest_cause(cop0, CAUSEF_BD); |
| else |
| kvm_clear_c0_guest_cause(cop0, CAUSEF_BD); |
| |
| kvm_change_c0_guest_cause(cop0, (0xff), |
| (exccode << CAUSEB_EXCCODE)); |
| |
| /* Set PC to the exception entry point */ |
| arch->pc = kvm_mips_guest_exception_base(vcpu) + 0x180; |
| kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr); |
| |
| kvm_debug("Delivering EXC %d @ pc %#lx, badVaddr: %#lx\n", |
| exccode, kvm_read_c0_guest_epc(cop0), |
| kvm_read_c0_guest_badvaddr(cop0)); |
| } else { |
| kvm_err("Trying to deliver EXC when EXL is already set\n"); |
| er = EMULATE_FAIL; |
| } |
| |
| return er; |
| } |
| |
| enum emulation_result kvm_mips_check_privilege(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu) |
| { |
| enum emulation_result er = EMULATE_DONE; |
| u32 exccode = (cause >> CAUSEB_EXCCODE) & 0x1f; |
| unsigned long badvaddr = vcpu->arch.host_cp0_badvaddr; |
| |
| int usermode = !KVM_GUEST_KERNEL_MODE(vcpu); |
| |
| if (usermode) { |
| switch (exccode) { |
| case EXCCODE_INT: |
| case EXCCODE_SYS: |
| case EXCCODE_BP: |
| case EXCCODE_RI: |
| case EXCCODE_TR: |
| case EXCCODE_MSAFPE: |
| case EXCCODE_FPE: |
| case EXCCODE_MSADIS: |
| break; |
| |
| case EXCCODE_CPU: |
| if (((cause & CAUSEF_CE) >> CAUSEB_CE) == 0) |
| er = EMULATE_PRIV_FAIL; |
| break; |
| |
| case EXCCODE_MOD: |
| break; |
| |
| case EXCCODE_TLBL: |
| /* |
| * We we are accessing Guest kernel space, then send an |
| * address error exception to the guest |
| */ |
| if (badvaddr >= (unsigned long) KVM_GUEST_KSEG0) { |
| kvm_debug("%s: LD MISS @ %#lx\n", __func__, |
| badvaddr); |
| cause &= ~0xff; |
| cause |= (EXCCODE_ADEL << CAUSEB_EXCCODE); |
| er = EMULATE_PRIV_FAIL; |
| } |
| break; |
| |
| case EXCCODE_TLBS: |
| /* |
| * We we are accessing Guest kernel space, then send an |
| * address error exception to the guest |
| */ |
| if (badvaddr >= (unsigned long) KVM_GUEST_KSEG0) { |
| kvm_debug("%s: ST MISS @ %#lx\n", __func__, |
| badvaddr); |
| cause &= ~0xff; |
| cause |= (EXCCODE_ADES << CAUSEB_EXCCODE); |
| er = EMULATE_PRIV_FAIL; |
| } |
| break; |
| |
| case EXCCODE_ADES: |
| kvm_debug("%s: address error ST @ %#lx\n", __func__, |
| badvaddr); |
| if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) { |
| cause &= ~0xff; |
| cause |= (EXCCODE_TLBS << CAUSEB_EXCCODE); |
| } |
| er = EMULATE_PRIV_FAIL; |
| break; |
| case EXCCODE_ADEL: |
| kvm_debug("%s: address error LD @ %#lx\n", __func__, |
| badvaddr); |
| if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) { |
| cause &= ~0xff; |
| cause |= (EXCCODE_TLBL << CAUSEB_EXCCODE); |
| } |
| er = EMULATE_PRIV_FAIL; |
| break; |
| default: |
| er = EMULATE_PRIV_FAIL; |
| break; |
| } |
| } |
| |
| if (er == EMULATE_PRIV_FAIL) |
| kvm_mips_emulate_exc(cause, opc, run, vcpu); |
| |
| return er; |
| } |
| |
| /* |
| * User Address (UA) fault, this could happen if |
| * (1) TLB entry not present/valid in both Guest and shadow host TLBs, in this |
| * case we pass on the fault to the guest kernel and let it handle it. |
| * (2) TLB entry is present in the Guest TLB but not in the shadow, in this |
| * case we inject the TLB from the Guest TLB into the shadow host TLB |
| */ |
| enum emulation_result kvm_mips_handle_tlbmiss(u32 cause, |
| u32 *opc, |
| struct kvm_run *run, |
| struct kvm_vcpu *vcpu, |
| bool write_fault) |
| { |
| enum emulation_result er = EMULATE_DONE; |
| u32 exccode = (cause >> CAUSEB_EXCCODE) & 0x1f; |
| unsigned long va = vcpu->arch.host_cp0_badvaddr; |
| int index; |
| |
| kvm_debug("kvm_mips_handle_tlbmiss: badvaddr: %#lx\n", |
| vcpu->arch.host_cp0_badvaddr); |
| |
| /* |
| * KVM would not have got the exception if this entry was valid in the |
| * shadow host TLB. Check the Guest TLB, if the entry is not there then |
| * send the guest an exception. The guest exc handler should then inject |
| * an entry into the guest TLB. |
| */ |
| index = kvm_mips_guest_tlb_lookup(vcpu, |
| (va & VPN2_MASK) | |
| (kvm_read_c0_guest_entryhi(vcpu->arch.cop0) & |
| KVM_ENTRYHI_ASID)); |
| if (index < 0) { |
| if (exccode == EXCCODE_TLBL) { |
| er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu); |
| } else if (exccode == EXCCODE_TLBS) { |
| er = kvm_mips_emulate_tlbmiss_st(cause, opc, run, vcpu); |
| } else { |
| kvm_err("%s: invalid exc code: %d\n", __func__, |
| exccode); |
| er = EMULATE_FAIL; |
| } |
| } else { |
| struct kvm_mips_tlb *tlb = &vcpu->arch.guest_tlb[index]; |
| |
| /* |
| * Check if the entry is valid, if not then setup a TLB invalid |
| * exception to the guest |
| */ |
| if (!TLB_IS_VALID(*tlb, va)) { |
| if (exccode == EXCCODE_TLBL) { |
| er = kvm_mips_emulate_tlbinv_ld(cause, opc, run, |
| vcpu); |
| } else if (exccode == EXCCODE_TLBS) { |
| er = kvm_mips_emulate_tlbinv_st(cause, opc, run, |
| vcpu); |
| } else { |
| kvm_err("%s: invalid exc code: %d\n", __func__, |
| exccode); |
| er = EMULATE_FAIL; |
| } |
| } else { |
| kvm_debug("Injecting hi: %#lx, lo0: %#lx, lo1: %#lx into shadow host TLB\n", |
| tlb->tlb_hi, tlb->tlb_lo[0], tlb->tlb_lo[1]); |
| /* |
| * OK we have a Guest TLB entry, now inject it into the |
| * shadow host TLB |
| */ |
| if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb, va, |
| write_fault)) { |
| kvm_err("%s: handling mapped seg tlb fault for %lx, index: %u, vcpu: %p, ASID: %#lx\n", |
| __func__, va, index, vcpu, |
| read_c0_entryhi()); |
| er = EMULATE_FAIL; |
| } |
| } |
| } |
| |
| return er; |
| } |