| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car Generation 2 support |
| * |
| * Copyright (C) 2013 Renesas Solutions Corp. |
| * Copyright (C) 2013 Magnus Damm |
| * Copyright (C) 2014 Ulrich Hecht |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/clocksource.h> |
| #include <linux/device.h> |
| #include <linux/dma-contiguous.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/memblock.h> |
| #include <linux/of.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_platform.h> |
| #include <asm/mach/arch.h> |
| #include <asm/secure_cntvoff.h> |
| #include "common.h" |
| #include "rcar-gen2.h" |
| |
| static const struct of_device_id cpg_matches[] __initconst = { |
| { .compatible = "renesas,rcar-gen2-cpg-clocks", }, |
| { .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" }, |
| { .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" }, |
| { .compatible = "renesas,r8a7791-cpg-mssr", .data = "extal" }, |
| { .compatible = "renesas,r8a7793-cpg-mssr", .data = "extal" }, |
| { /* sentinel */ } |
| }; |
| |
| static unsigned int __init get_extal_freq(void) |
| { |
| const struct of_device_id *match; |
| struct device_node *cpg, *extal; |
| u32 freq = 20000000; |
| int idx = 0; |
| |
| cpg = of_find_matching_node_and_match(NULL, cpg_matches, &match); |
| if (!cpg) |
| return freq; |
| |
| if (match->data) |
| idx = of_property_match_string(cpg, "clock-names", match->data); |
| extal = of_parse_phandle(cpg, "clocks", idx); |
| of_node_put(cpg); |
| if (!extal) |
| return freq; |
| |
| of_property_read_u32(extal, "clock-frequency", &freq); |
| of_node_put(extal); |
| return freq; |
| } |
| |
| #define CNTCR 0 |
| #define CNTFID0 0x20 |
| |
| void __init rcar_gen2_timer_init(void) |
| { |
| void __iomem *base; |
| u32 freq; |
| |
| secure_cntvoff_init(); |
| |
| if (of_machine_is_compatible("renesas,r8a7745") || |
| of_machine_is_compatible("renesas,r8a77470") || |
| of_machine_is_compatible("renesas,r8a7792") || |
| of_machine_is_compatible("renesas,r8a7794")) { |
| freq = 260000000 / 8; /* ZS / 8 */ |
| } else { |
| /* At Linux boot time the r8a7790 arch timer comes up |
| * with the counter disabled. Moreover, it may also report |
| * a potentially incorrect fixed 13 MHz frequency. To be |
| * correct these registers need to be updated to use the |
| * frequency EXTAL / 2. |
| */ |
| freq = get_extal_freq() / 2; |
| } |
| |
| /* Remap "armgcnt address map" space */ |
| base = ioremap(0xe6080000, PAGE_SIZE); |
| |
| /* |
| * Update the timer if it is either not running, or is not at the |
| * right frequency. The timer is only configurable in secure mode |
| * so this avoids an abort if the loader started the timer and |
| * entered the kernel in non-secure mode. |
| */ |
| |
| if ((ioread32(base + CNTCR) & 1) == 0 || |
| ioread32(base + CNTFID0) != freq) { |
| /* Update registers with correct frequency */ |
| iowrite32(freq, base + CNTFID0); |
| asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); |
| |
| /* make sure arch timer is started by setting bit 0 of CNTCR */ |
| iowrite32(1, base + CNTCR); |
| } |
| |
| iounmap(base); |
| |
| of_clk_init(NULL); |
| timer_probe(); |
| } |
| |
| struct memory_reserve_config { |
| u64 reserved; |
| u64 base, size; |
| }; |
| |
| static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| const char *type = of_get_flat_dt_prop(node, "device_type", NULL); |
| const __be32 *reg, *endp; |
| int l; |
| struct memory_reserve_config *mrc = data; |
| u64 lpae_start = 1ULL << 32; |
| |
| /* We are scanning "memory" nodes only */ |
| if (type == NULL || strcmp(type, "memory")) |
| return 0; |
| |
| reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); |
| if (reg == NULL) |
| reg = of_get_flat_dt_prop(node, "reg", &l); |
| if (reg == NULL) |
| return 0; |
| |
| endp = reg + (l / sizeof(__be32)); |
| while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { |
| u64 base, size; |
| |
| base = dt_mem_next_cell(dt_root_addr_cells, ®); |
| size = dt_mem_next_cell(dt_root_size_cells, ®); |
| |
| if (base >= lpae_start) |
| continue; |
| |
| if ((base + size) >= lpae_start) |
| size = lpae_start - base; |
| |
| if (size < mrc->reserved) |
| continue; |
| |
| if (base < mrc->base) |
| continue; |
| |
| /* keep the area at top near the 32-bit legacy limit */ |
| mrc->base = base + size - mrc->reserved; |
| mrc->size = mrc->reserved; |
| } |
| |
| return 0; |
| } |
| |
| void __init rcar_gen2_reserve(void) |
| { |
| struct memory_reserve_config mrc; |
| |
| /* reserve 256 MiB at the top of the physical legacy 32-bit space */ |
| memset(&mrc, 0, sizeof(mrc)); |
| mrc.reserved = SZ_256M; |
| |
| of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); |
| #ifdef CONFIG_DMA_CMA |
| if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { |
| static struct cma *rcar_gen2_dma_contiguous; |
| |
| dma_contiguous_reserve_area(mrc.size, mrc.base, 0, |
| &rcar_gen2_dma_contiguous, true); |
| } |
| #endif |
| } |
| |
| static const char * const rcar_gen2_boards_compat_dt[] __initconst = { |
| "renesas,r8a7790", |
| "renesas,r8a7791", |
| "renesas,r8a7792", |
| "renesas,r8a7793", |
| "renesas,r8a7794", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") |
| .init_late = shmobile_init_late, |
| .init_time = rcar_gen2_timer_init, |
| .reserve = rcar_gen2_reserve, |
| .dt_compat = rcar_gen2_boards_compat_dt, |
| MACHINE_END |
| |
| static const char * const rz_g1_boards_compat_dt[] __initconst = { |
| "renesas,r8a7743", |
| "renesas,r8a7745", |
| "renesas,r8a77470", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") |
| .init_late = shmobile_init_late, |
| .init_time = rcar_gen2_timer_init, |
| .reserve = rcar_gen2_reserve, |
| .dt_compat = rz_g1_boards_compat_dt, |
| MACHINE_END |