| /* | |
| * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver | |
| * | |
| * Copyright (C) 2005 ARM Ltd | |
| * Copyright (C) 2010 ST-Ericsson SA | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * pl08x information required by platform code | |
| * | |
| * Please credit ARM.com | |
| * Documentation: ARM DDI 0196D | |
| * | |
| */ | |
| #ifndef AMBA_PL08X_H | |
| #define AMBA_PL08X_H | |
| /* We need sizes of structs from this header */ | |
| #include <linux/dmaengine.h> | |
| #include <linux/interrupt.h> | |
| /** | |
| * struct pl08x_channel_data - data structure to pass info between | |
| * platform and PL08x driver regarding channel configuration | |
| * @bus_id: name of this device channel, not just a device name since | |
| * devices may have more than one channel e.g. "foo_tx" | |
| * @min_signal: the minimum DMA signal number to be muxed in for this | |
| * channel (for platforms supporting muxed signals). If you have | |
| * static assignments, make sure this is set to the assigned signal | |
| * number, PL08x have 16 possible signals in number 0 thru 15 so | |
| * when these are not enough they often get muxed (in hardware) | |
| * disabling simultaneous use of the same channel for two devices. | |
| * @max_signal: the maximum DMA signal number to be muxed in for | |
| * the channel. Set to the same as min_signal for | |
| * devices with static assignments | |
| * @muxval: a number usually used to poke into some mux regiser to | |
| * mux in the signal to this channel | |
| * @cctl_opt: default options for the channel control register | |
| * @addr: source/target address in physical memory for this DMA channel, | |
| * can be the address of a FIFO register for burst requests for example. | |
| * This can be left undefined if the PrimeCell API is used for configuring | |
| * this. | |
| * @circular_buffer: whether the buffer passed in is circular and | |
| * shall simply be looped round round (like a record baby round | |
| * round round round) | |
| * @single: the device connected to this channel will request single | |
| * DMA transfers, not bursts. (Bursts are default.) | |
| */ | |
| struct pl08x_channel_data { | |
| char *bus_id; | |
| int min_signal; | |
| int max_signal; | |
| u32 muxval; | |
| u32 cctl; | |
| u32 ccfg; | |
| dma_addr_t addr; | |
| bool circular_buffer; | |
| bool single; | |
| }; | |
| /** | |
| * Struct pl08x_bus_data - information of source or destination | |
| * busses for a transfer | |
| * @addr: current address | |
| * @maxwidth: the maximum width of a transfer on this bus | |
| * @buswidth: the width of this bus in bytes: 1, 2 or 4 | |
| * @fill_bytes: bytes required to fill to the next bus memory | |
| * boundary | |
| */ | |
| struct pl08x_bus_data { | |
| dma_addr_t addr; | |
| u8 maxwidth; | |
| u8 buswidth; | |
| u32 fill_bytes; | |
| }; | |
| /** | |
| * struct pl08x_phy_chan - holder for the physical channels | |
| * @id: physical index to this channel | |
| * @lock: a lock to use when altering an instance of this struct | |
| * @signal: the physical signal (aka channel) serving this | |
| * physical channel right now | |
| * @serving: the virtual channel currently being served by this | |
| * physical channel | |
| */ | |
| struct pl08x_phy_chan { | |
| unsigned int id; | |
| void __iomem *base; | |
| spinlock_t lock; | |
| int signal; | |
| struct pl08x_dma_chan *serving; | |
| u32 csrc; | |
| u32 cdst; | |
| u32 clli; | |
| u32 cctl; | |
| u32 ccfg; | |
| }; | |
| /** | |
| * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor | |
| * @llis_bus: DMA memory address (physical) start for the LLIs | |
| * @llis_va: virtual memory address start for the LLIs | |
| */ | |
| struct pl08x_txd { | |
| struct dma_async_tx_descriptor tx; | |
| struct list_head node; | |
| enum dma_data_direction direction; | |
| struct pl08x_bus_data srcbus; | |
| struct pl08x_bus_data dstbus; | |
| int len; | |
| dma_addr_t llis_bus; | |
| void *llis_va; | |
| struct pl08x_channel_data *cd; | |
| bool active; | |
| /* | |
| * Settings to be put into the physical channel when we | |
| * trigger this txd | |
| */ | |
| u32 csrc; | |
| u32 cdst; | |
| u32 clli; | |
| u32 cctl; | |
| }; | |
| /** | |
| * struct pl08x_dma_chan_state - holds the PL08x specific virtual | |
| * channel states | |
| * @PL08X_CHAN_IDLE: the channel is idle | |
| * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport | |
| * channel and is running a transfer on it | |
| * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport | |
| * channel, but the transfer is currently paused | |
| * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport | |
| * channel to become available (only pertains to memcpy channels) | |
| */ | |
| enum pl08x_dma_chan_state { | |
| PL08X_CHAN_IDLE, | |
| PL08X_CHAN_RUNNING, | |
| PL08X_CHAN_PAUSED, | |
| PL08X_CHAN_WAITING, | |
| }; | |
| /** | |
| * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel | |
| * @chan: wrappped abstract channel | |
| * @phychan: the physical channel utilized by this channel, if there is one | |
| * @tasklet: tasklet scheduled by the IRQ to handle actual work etc | |
| * @name: name of channel | |
| * @cd: channel platform data | |
| * @runtime_addr: address for RX/TX according to the runtime config | |
| * @runtime_direction: current direction of this channel according to | |
| * runtime config | |
| * @lc: last completed transaction on this channel | |
| * @desc_list: queued transactions pending on this channel | |
| * @at: active transaction on this channel | |
| * @lockflags: sometimes we let a lock last between two function calls, | |
| * especially prep/submit, and then we need to store the IRQ flags | |
| * in the channel state, here | |
| * @lock: a lock for this channel data | |
| * @host: a pointer to the host (internal use) | |
| * @state: whether the channel is idle, paused, running etc | |
| * @slave: whether this channel is a device (slave) or for memcpy | |
| * @waiting: a TX descriptor on this channel which is waiting for | |
| * a physical channel to become available | |
| */ | |
| struct pl08x_dma_chan { | |
| struct dma_chan chan; | |
| struct pl08x_phy_chan *phychan; | |
| struct tasklet_struct tasklet; | |
| char *name; | |
| struct pl08x_channel_data *cd; | |
| dma_addr_t runtime_addr; | |
| enum dma_data_direction runtime_direction; | |
| atomic_t last_issued; | |
| dma_cookie_t lc; | |
| struct list_head desc_list; | |
| struct pl08x_txd *at; | |
| unsigned long lockflags; | |
| spinlock_t lock; | |
| void *host; | |
| enum pl08x_dma_chan_state state; | |
| bool slave; | |
| struct pl08x_txd *waiting; | |
| }; | |
| /** | |
| * struct pl08x_platform_data - the platform configuration for the | |
| * PL08x PrimeCells. | |
| * @slave_channels: the channels defined for the different devices on the | |
| * platform, all inclusive, including multiplexed channels. The available | |
| * physical channels will be multiplexed around these signals as they | |
| * are requested, just enumerate all possible channels. | |
| * @get_signal: request a physical signal to be used for a DMA | |
| * transfer immediately: if there is some multiplexing or similar blocking | |
| * the use of the channel the transfer can be denied by returning | |
| * less than zero, else it returns the allocated signal number | |
| * @put_signal: indicate to the platform that this physical signal is not | |
| * running any DMA transfer and multiplexing can be recycled | |
| * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the | |
| * LLI addresses are on 0/1 Master 1/2. | |
| */ | |
| struct pl08x_platform_data { | |
| struct pl08x_channel_data *slave_channels; | |
| unsigned int num_slave_channels; | |
| struct pl08x_channel_data memcpy_channel; | |
| int (*get_signal)(struct pl08x_dma_chan *); | |
| void (*put_signal)(struct pl08x_dma_chan *); | |
| }; | |
| #ifdef CONFIG_AMBA_PL08X | |
| bool pl08x_filter_id(struct dma_chan *chan, void *chan_id); | |
| #else | |
| static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) | |
| { | |
| return false; | |
| } | |
| #endif | |
| #endif /* AMBA_PL08X_H */ |