| /* | |
| * linux/fs/exec.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| */ | |
| /* | |
| * #!-checking implemented by tytso. | |
| */ | |
| /* | |
| * Demand-loading implemented 01.12.91 - no need to read anything but | |
| * the header into memory. The inode of the executable is put into | |
| * "current->executable", and page faults do the actual loading. Clean. | |
| * | |
| * Once more I can proudly say that linux stood up to being changed: it | |
| * was less than 2 hours work to get demand-loading completely implemented. | |
| * | |
| * Demand loading changed July 1993 by Eric Youngdale. Use mmap instead, | |
| * current->executable is only used by the procfs. This allows a dispatch | |
| * table to check for several different types of binary formats. We keep | |
| * trying until we recognize the file or we run out of supported binary | |
| * formats. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/file.h> | |
| #include <linux/fdtable.h> | |
| #include <linux/mm.h> | |
| #include <linux/stat.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/swap.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/highmem.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/key.h> | |
| #include <linux/personality.h> | |
| #include <linux/binfmts.h> | |
| #include <linux/utsname.h> | |
| #include <linux/pid_namespace.h> | |
| #include <linux/module.h> | |
| #include <linux/namei.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/mount.h> | |
| #include <linux/security.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/tsacct_kern.h> | |
| #include <linux/cn_proc.h> | |
| #include <linux/audit.h> | |
| #include <linux/tracehook.h> | |
| #include <linux/kmod.h> | |
| #include <linux/fsnotify.h> | |
| #include <linux/fs_struct.h> | |
| #include <linux/pipe_fs_i.h> | |
| #include <linux/oom.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/tlb.h> | |
| #include "internal.h" | |
| int core_uses_pid; | |
| char core_pattern[CORENAME_MAX_SIZE] = "core"; | |
| unsigned int core_pipe_limit; | |
| int suid_dumpable = 0; | |
| struct core_name { | |
| char *corename; | |
| int used, size; | |
| }; | |
| static atomic_t call_count = ATOMIC_INIT(1); | |
| /* The maximal length of core_pattern is also specified in sysctl.c */ | |
| static LIST_HEAD(formats); | |
| static DEFINE_RWLOCK(binfmt_lock); | |
| int __register_binfmt(struct linux_binfmt * fmt, int insert) | |
| { | |
| if (!fmt) | |
| return -EINVAL; | |
| write_lock(&binfmt_lock); | |
| insert ? list_add(&fmt->lh, &formats) : | |
| list_add_tail(&fmt->lh, &formats); | |
| write_unlock(&binfmt_lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(__register_binfmt); | |
| void unregister_binfmt(struct linux_binfmt * fmt) | |
| { | |
| write_lock(&binfmt_lock); | |
| list_del(&fmt->lh); | |
| write_unlock(&binfmt_lock); | |
| } | |
| EXPORT_SYMBOL(unregister_binfmt); | |
| static inline void put_binfmt(struct linux_binfmt * fmt) | |
| { | |
| module_put(fmt->module); | |
| } | |
| /* | |
| * Note that a shared library must be both readable and executable due to | |
| * security reasons. | |
| * | |
| * Also note that we take the address to load from from the file itself. | |
| */ | |
| SYSCALL_DEFINE1(uselib, const char __user *, library) | |
| { | |
| struct file *file; | |
| char *tmp = getname(library); | |
| int error = PTR_ERR(tmp); | |
| if (IS_ERR(tmp)) | |
| goto out; | |
| file = do_filp_open(AT_FDCWD, tmp, | |
| O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, | |
| MAY_READ | MAY_EXEC | MAY_OPEN); | |
| putname(tmp); | |
| error = PTR_ERR(file); | |
| if (IS_ERR(file)) | |
| goto out; | |
| error = -EINVAL; | |
| if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) | |
| goto exit; | |
| error = -EACCES; | |
| if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) | |
| goto exit; | |
| fsnotify_open(file); | |
| error = -ENOEXEC; | |
| if(file->f_op) { | |
| struct linux_binfmt * fmt; | |
| read_lock(&binfmt_lock); | |
| list_for_each_entry(fmt, &formats, lh) { | |
| if (!fmt->load_shlib) | |
| continue; | |
| if (!try_module_get(fmt->module)) | |
| continue; | |
| read_unlock(&binfmt_lock); | |
| error = fmt->load_shlib(file); | |
| read_lock(&binfmt_lock); | |
| put_binfmt(fmt); | |
| if (error != -ENOEXEC) | |
| break; | |
| } | |
| read_unlock(&binfmt_lock); | |
| } | |
| exit: | |
| fput(file); | |
| out: | |
| return error; | |
| } | |
| #ifdef CONFIG_MMU | |
| static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| int write) | |
| { | |
| struct page *page; | |
| int ret; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| if (write) { | |
| ret = expand_stack_downwards(bprm->vma, pos); | |
| if (ret < 0) | |
| return NULL; | |
| } | |
| #endif | |
| ret = get_user_pages(current, bprm->mm, pos, | |
| 1, write, 1, &page, NULL); | |
| if (ret <= 0) | |
| return NULL; | |
| if (write) { | |
| unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; | |
| struct rlimit *rlim; | |
| /* | |
| * We've historically supported up to 32 pages (ARG_MAX) | |
| * of argument strings even with small stacks | |
| */ | |
| if (size <= ARG_MAX) | |
| return page; | |
| /* | |
| * Limit to 1/4-th the stack size for the argv+env strings. | |
| * This ensures that: | |
| * - the remaining binfmt code will not run out of stack space, | |
| * - the program will have a reasonable amount of stack left | |
| * to work from. | |
| */ | |
| rlim = current->signal->rlim; | |
| if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) { | |
| put_page(page); | |
| return NULL; | |
| } | |
| } | |
| return page; | |
| } | |
| static void put_arg_page(struct page *page) | |
| { | |
| put_page(page); | |
| } | |
| static void free_arg_page(struct linux_binprm *bprm, int i) | |
| { | |
| } | |
| static void free_arg_pages(struct linux_binprm *bprm) | |
| { | |
| } | |
| static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| struct page *page) | |
| { | |
| flush_cache_page(bprm->vma, pos, page_to_pfn(page)); | |
| } | |
| static int __bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| int err; | |
| struct vm_area_struct *vma = NULL; | |
| struct mm_struct *mm = bprm->mm; | |
| bprm->vma = vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); | |
| if (!vma) | |
| return -ENOMEM; | |
| down_write(&mm->mmap_sem); | |
| vma->vm_mm = mm; | |
| /* | |
| * Place the stack at the largest stack address the architecture | |
| * supports. Later, we'll move this to an appropriate place. We don't | |
| * use STACK_TOP because that can depend on attributes which aren't | |
| * configured yet. | |
| */ | |
| BUG_ON(VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP); | |
| vma->vm_end = STACK_TOP_MAX; | |
| vma->vm_start = vma->vm_end - PAGE_SIZE; | |
| vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP; | |
| vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); | |
| INIT_LIST_HEAD(&vma->anon_vma_chain); | |
| err = insert_vm_struct(mm, vma); | |
| if (err) | |
| goto err; | |
| mm->stack_vm = mm->total_vm = 1; | |
| up_write(&mm->mmap_sem); | |
| bprm->p = vma->vm_end - sizeof(void *); | |
| return 0; | |
| err: | |
| up_write(&mm->mmap_sem); | |
| bprm->vma = NULL; | |
| kmem_cache_free(vm_area_cachep, vma); | |
| return err; | |
| } | |
| static bool valid_arg_len(struct linux_binprm *bprm, long len) | |
| { | |
| return len <= MAX_ARG_STRLEN; | |
| } | |
| #else | |
| static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| int write) | |
| { | |
| struct page *page; | |
| page = bprm->page[pos / PAGE_SIZE]; | |
| if (!page && write) { | |
| page = alloc_page(GFP_HIGHUSER|__GFP_ZERO); | |
| if (!page) | |
| return NULL; | |
| bprm->page[pos / PAGE_SIZE] = page; | |
| } | |
| return page; | |
| } | |
| static void put_arg_page(struct page *page) | |
| { | |
| } | |
| static void free_arg_page(struct linux_binprm *bprm, int i) | |
| { | |
| if (bprm->page[i]) { | |
| __free_page(bprm->page[i]); | |
| bprm->page[i] = NULL; | |
| } | |
| } | |
| static void free_arg_pages(struct linux_binprm *bprm) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_ARG_PAGES; i++) | |
| free_arg_page(bprm, i); | |
| } | |
| static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| struct page *page) | |
| { | |
| } | |
| static int __bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| bprm->p = PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *); | |
| return 0; | |
| } | |
| static bool valid_arg_len(struct linux_binprm *bprm, long len) | |
| { | |
| return len <= bprm->p; | |
| } | |
| #endif /* CONFIG_MMU */ | |
| /* | |
| * Create a new mm_struct and populate it with a temporary stack | |
| * vm_area_struct. We don't have enough context at this point to set the stack | |
| * flags, permissions, and offset, so we use temporary values. We'll update | |
| * them later in setup_arg_pages(). | |
| */ | |
| int bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| int err; | |
| struct mm_struct *mm = NULL; | |
| bprm->mm = mm = mm_alloc(); | |
| err = -ENOMEM; | |
| if (!mm) | |
| goto err; | |
| err = init_new_context(current, mm); | |
| if (err) | |
| goto err; | |
| err = __bprm_mm_init(bprm); | |
| if (err) | |
| goto err; | |
| return 0; | |
| err: | |
| if (mm) { | |
| bprm->mm = NULL; | |
| mmdrop(mm); | |
| } | |
| return err; | |
| } | |
| /* | |
| * count() counts the number of strings in array ARGV. | |
| */ | |
| static int count(const char __user * const __user * argv, int max) | |
| { | |
| int i = 0; | |
| if (argv != NULL) { | |
| for (;;) { | |
| const char __user * p; | |
| if (get_user(p, argv)) | |
| return -EFAULT; | |
| if (!p) | |
| break; | |
| argv++; | |
| if (i++ >= max) | |
| return -E2BIG; | |
| if (fatal_signal_pending(current)) | |
| return -ERESTARTNOHAND; | |
| cond_resched(); | |
| } | |
| } | |
| return i; | |
| } | |
| /* | |
| * 'copy_strings()' copies argument/environment strings from the old | |
| * processes's memory to the new process's stack. The call to get_user_pages() | |
| * ensures the destination page is created and not swapped out. | |
| */ | |
| static int copy_strings(int argc, const char __user *const __user *argv, | |
| struct linux_binprm *bprm) | |
| { | |
| struct page *kmapped_page = NULL; | |
| char *kaddr = NULL; | |
| unsigned long kpos = 0; | |
| int ret; | |
| while (argc-- > 0) { | |
| const char __user *str; | |
| int len; | |
| unsigned long pos; | |
| if (get_user(str, argv+argc) || | |
| !(len = strnlen_user(str, MAX_ARG_STRLEN))) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| if (!valid_arg_len(bprm, len)) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| /* We're going to work our way backwords. */ | |
| pos = bprm->p; | |
| str += len; | |
| bprm->p -= len; | |
| while (len > 0) { | |
| int offset, bytes_to_copy; | |
| if (fatal_signal_pending(current)) { | |
| ret = -ERESTARTNOHAND; | |
| goto out; | |
| } | |
| cond_resched(); | |
| offset = pos % PAGE_SIZE; | |
| if (offset == 0) | |
| offset = PAGE_SIZE; | |
| bytes_to_copy = offset; | |
| if (bytes_to_copy > len) | |
| bytes_to_copy = len; | |
| offset -= bytes_to_copy; | |
| pos -= bytes_to_copy; | |
| str -= bytes_to_copy; | |
| len -= bytes_to_copy; | |
| if (!kmapped_page || kpos != (pos & PAGE_MASK)) { | |
| struct page *page; | |
| page = get_arg_page(bprm, pos, 1); | |
| if (!page) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| if (kmapped_page) { | |
| flush_kernel_dcache_page(kmapped_page); | |
| kunmap(kmapped_page); | |
| put_arg_page(kmapped_page); | |
| } | |
| kmapped_page = page; | |
| kaddr = kmap(kmapped_page); | |
| kpos = pos & PAGE_MASK; | |
| flush_arg_page(bprm, kpos, kmapped_page); | |
| } | |
| if (copy_from_user(kaddr+offset, str, bytes_to_copy)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| } | |
| } | |
| ret = 0; | |
| out: | |
| if (kmapped_page) { | |
| flush_kernel_dcache_page(kmapped_page); | |
| kunmap(kmapped_page); | |
| put_arg_page(kmapped_page); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Like copy_strings, but get argv and its values from kernel memory. | |
| */ | |
| int copy_strings_kernel(int argc, const char *const *argv, | |
| struct linux_binprm *bprm) | |
| { | |
| int r; | |
| mm_segment_t oldfs = get_fs(); | |
| set_fs(KERNEL_DS); | |
| r = copy_strings(argc, (const char __user *const __user *)argv, bprm); | |
| set_fs(oldfs); | |
| return r; | |
| } | |
| EXPORT_SYMBOL(copy_strings_kernel); | |
| #ifdef CONFIG_MMU | |
| /* | |
| * During bprm_mm_init(), we create a temporary stack at STACK_TOP_MAX. Once | |
| * the binfmt code determines where the new stack should reside, we shift it to | |
| * its final location. The process proceeds as follows: | |
| * | |
| * 1) Use shift to calculate the new vma endpoints. | |
| * 2) Extend vma to cover both the old and new ranges. This ensures the | |
| * arguments passed to subsequent functions are consistent. | |
| * 3) Move vma's page tables to the new range. | |
| * 4) Free up any cleared pgd range. | |
| * 5) Shrink the vma to cover only the new range. | |
| */ | |
| static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) | |
| { | |
| struct mm_struct *mm = vma->vm_mm; | |
| unsigned long old_start = vma->vm_start; | |
| unsigned long old_end = vma->vm_end; | |
| unsigned long length = old_end - old_start; | |
| unsigned long new_start = old_start - shift; | |
| unsigned long new_end = old_end - shift; | |
| struct mmu_gather *tlb; | |
| BUG_ON(new_start > new_end); | |
| /* | |
| * ensure there are no vmas between where we want to go | |
| * and where we are | |
| */ | |
| if (vma != find_vma(mm, new_start)) | |
| return -EFAULT; | |
| /* | |
| * cover the whole range: [new_start, old_end) | |
| */ | |
| if (vma_adjust(vma, new_start, old_end, vma->vm_pgoff, NULL)) | |
| return -ENOMEM; | |
| /* | |
| * move the page tables downwards, on failure we rely on | |
| * process cleanup to remove whatever mess we made. | |
| */ | |
| if (length != move_page_tables(vma, old_start, | |
| vma, new_start, length)) | |
| return -ENOMEM; | |
| lru_add_drain(); | |
| tlb = tlb_gather_mmu(mm, 0); | |
| if (new_end > old_start) { | |
| /* | |
| * when the old and new regions overlap clear from new_end. | |
| */ | |
| free_pgd_range(tlb, new_end, old_end, new_end, | |
| vma->vm_next ? vma->vm_next->vm_start : 0); | |
| } else { | |
| /* | |
| * otherwise, clean from old_start; this is done to not touch | |
| * the address space in [new_end, old_start) some architectures | |
| * have constraints on va-space that make this illegal (IA64) - | |
| * for the others its just a little faster. | |
| */ | |
| free_pgd_range(tlb, old_start, old_end, new_end, | |
| vma->vm_next ? vma->vm_next->vm_start : 0); | |
| } | |
| tlb_finish_mmu(tlb, new_end, old_end); | |
| /* | |
| * Shrink the vma to just the new range. Always succeeds. | |
| */ | |
| vma_adjust(vma, new_start, new_end, vma->vm_pgoff, NULL); | |
| return 0; | |
| } | |
| /* | |
| * Finalizes the stack vm_area_struct. The flags and permissions are updated, | |
| * the stack is optionally relocated, and some extra space is added. | |
| */ | |
| int setup_arg_pages(struct linux_binprm *bprm, | |
| unsigned long stack_top, | |
| int executable_stack) | |
| { | |
| unsigned long ret; | |
| unsigned long stack_shift; | |
| struct mm_struct *mm = current->mm; | |
| struct vm_area_struct *vma = bprm->vma; | |
| struct vm_area_struct *prev = NULL; | |
| unsigned long vm_flags; | |
| unsigned long stack_base; | |
| unsigned long stack_size; | |
| unsigned long stack_expand; | |
| unsigned long rlim_stack; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| /* Limit stack size to 1GB */ | |
| stack_base = rlimit_max(RLIMIT_STACK); | |
| if (stack_base > (1 << 30)) | |
| stack_base = 1 << 30; | |
| /* Make sure we didn't let the argument array grow too large. */ | |
| if (vma->vm_end - vma->vm_start > stack_base) | |
| return -ENOMEM; | |
| stack_base = PAGE_ALIGN(stack_top - stack_base); | |
| stack_shift = vma->vm_start - stack_base; | |
| mm->arg_start = bprm->p - stack_shift; | |
| bprm->p = vma->vm_end - stack_shift; | |
| #else | |
| stack_top = arch_align_stack(stack_top); | |
| stack_top = PAGE_ALIGN(stack_top); | |
| if (unlikely(stack_top < mmap_min_addr) || | |
| unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr)) | |
| return -ENOMEM; | |
| stack_shift = vma->vm_end - stack_top; | |
| bprm->p -= stack_shift; | |
| mm->arg_start = bprm->p; | |
| #endif | |
| if (bprm->loader) | |
| bprm->loader -= stack_shift; | |
| bprm->exec -= stack_shift; | |
| down_write(&mm->mmap_sem); | |
| vm_flags = VM_STACK_FLAGS; | |
| /* | |
| * Adjust stack execute permissions; explicitly enable for | |
| * EXSTACK_ENABLE_X, disable for EXSTACK_DISABLE_X and leave alone | |
| * (arch default) otherwise. | |
| */ | |
| if (unlikely(executable_stack == EXSTACK_ENABLE_X)) | |
| vm_flags |= VM_EXEC; | |
| else if (executable_stack == EXSTACK_DISABLE_X) | |
| vm_flags &= ~VM_EXEC; | |
| vm_flags |= mm->def_flags; | |
| vm_flags |= VM_STACK_INCOMPLETE_SETUP; | |
| ret = mprotect_fixup(vma, &prev, vma->vm_start, vma->vm_end, | |
| vm_flags); | |
| if (ret) | |
| goto out_unlock; | |
| BUG_ON(prev != vma); | |
| /* Move stack pages down in memory. */ | |
| if (stack_shift) { | |
| ret = shift_arg_pages(vma, stack_shift); | |
| if (ret) | |
| goto out_unlock; | |
| } | |
| /* mprotect_fixup is overkill to remove the temporary stack flags */ | |
| vma->vm_flags &= ~VM_STACK_INCOMPLETE_SETUP; | |
| stack_expand = 131072UL; /* randomly 32*4k (or 2*64k) pages */ | |
| stack_size = vma->vm_end - vma->vm_start; | |
| /* | |
| * Align this down to a page boundary as expand_stack | |
| * will align it up. | |
| */ | |
| rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| if (stack_size + stack_expand > rlim_stack) | |
| stack_base = vma->vm_start + rlim_stack; | |
| else | |
| stack_base = vma->vm_end + stack_expand; | |
| #else | |
| if (stack_size + stack_expand > rlim_stack) | |
| stack_base = vma->vm_end - rlim_stack; | |
| else | |
| stack_base = vma->vm_start - stack_expand; | |
| #endif | |
| current->mm->start_stack = bprm->p; | |
| ret = expand_stack(vma, stack_base); | |
| if (ret) | |
| ret = -EFAULT; | |
| out_unlock: | |
| up_write(&mm->mmap_sem); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(setup_arg_pages); | |
| #endif /* CONFIG_MMU */ | |
| struct file *open_exec(const char *name) | |
| { | |
| struct file *file; | |
| int err; | |
| file = do_filp_open(AT_FDCWD, name, | |
| O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, | |
| MAY_EXEC | MAY_OPEN); | |
| if (IS_ERR(file)) | |
| goto out; | |
| err = -EACCES; | |
| if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) | |
| goto exit; | |
| if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) | |
| goto exit; | |
| fsnotify_open(file); | |
| err = deny_write_access(file); | |
| if (err) | |
| goto exit; | |
| out: | |
| return file; | |
| exit: | |
| fput(file); | |
| return ERR_PTR(err); | |
| } | |
| EXPORT_SYMBOL(open_exec); | |
| int kernel_read(struct file *file, loff_t offset, | |
| char *addr, unsigned long count) | |
| { | |
| mm_segment_t old_fs; | |
| loff_t pos = offset; | |
| int result; | |
| old_fs = get_fs(); | |
| set_fs(get_ds()); | |
| /* The cast to a user pointer is valid due to the set_fs() */ | |
| result = vfs_read(file, (void __user *)addr, count, &pos); | |
| set_fs(old_fs); | |
| return result; | |
| } | |
| EXPORT_SYMBOL(kernel_read); | |
| static int exec_mmap(struct mm_struct *mm) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct * old_mm, *active_mm; | |
| /* Notify parent that we're no longer interested in the old VM */ | |
| tsk = current; | |
| old_mm = current->mm; | |
| sync_mm_rss(tsk, old_mm); | |
| mm_release(tsk, old_mm); | |
| if (old_mm) { | |
| /* | |
| * Make sure that if there is a core dump in progress | |
| * for the old mm, we get out and die instead of going | |
| * through with the exec. We must hold mmap_sem around | |
| * checking core_state and changing tsk->mm. | |
| */ | |
| down_read(&old_mm->mmap_sem); | |
| if (unlikely(old_mm->core_state)) { | |
| up_read(&old_mm->mmap_sem); | |
| return -EINTR; | |
| } | |
| } | |
| task_lock(tsk); | |
| active_mm = tsk->active_mm; | |
| tsk->mm = mm; | |
| tsk->active_mm = mm; | |
| activate_mm(active_mm, mm); | |
| if (old_mm && tsk->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) { | |
| atomic_dec(&old_mm->oom_disable_count); | |
| atomic_inc(&tsk->mm->oom_disable_count); | |
| } | |
| task_unlock(tsk); | |
| arch_pick_mmap_layout(mm); | |
| if (old_mm) { | |
| up_read(&old_mm->mmap_sem); | |
| BUG_ON(active_mm != old_mm); | |
| mm_update_next_owner(old_mm); | |
| mmput(old_mm); | |
| return 0; | |
| } | |
| mmdrop(active_mm); | |
| return 0; | |
| } | |
| /* | |
| * This function makes sure the current process has its own signal table, | |
| * so that flush_signal_handlers can later reset the handlers without | |
| * disturbing other processes. (Other processes might share the signal | |
| * table via the CLONE_SIGHAND option to clone().) | |
| */ | |
| static int de_thread(struct task_struct *tsk) | |
| { | |
| struct signal_struct *sig = tsk->signal; | |
| struct sighand_struct *oldsighand = tsk->sighand; | |
| spinlock_t *lock = &oldsighand->siglock; | |
| if (thread_group_empty(tsk)) | |
| goto no_thread_group; | |
| /* | |
| * Kill all other threads in the thread group. | |
| */ | |
| spin_lock_irq(lock); | |
| if (signal_group_exit(sig)) { | |
| /* | |
| * Another group action in progress, just | |
| * return so that the signal is processed. | |
| */ | |
| spin_unlock_irq(lock); | |
| return -EAGAIN; | |
| } | |
| sig->group_exit_task = tsk; | |
| sig->notify_count = zap_other_threads(tsk); | |
| if (!thread_group_leader(tsk)) | |
| sig->notify_count--; | |
| while (sig->notify_count) { | |
| __set_current_state(TASK_UNINTERRUPTIBLE); | |
| spin_unlock_irq(lock); | |
| schedule(); | |
| spin_lock_irq(lock); | |
| } | |
| spin_unlock_irq(lock); | |
| /* | |
| * At this point all other threads have exited, all we have to | |
| * do is to wait for the thread group leader to become inactive, | |
| * and to assume its PID: | |
| */ | |
| if (!thread_group_leader(tsk)) { | |
| struct task_struct *leader = tsk->group_leader; | |
| sig->notify_count = -1; /* for exit_notify() */ | |
| for (;;) { | |
| write_lock_irq(&tasklist_lock); | |
| if (likely(leader->exit_state)) | |
| break; | |
| __set_current_state(TASK_UNINTERRUPTIBLE); | |
| write_unlock_irq(&tasklist_lock); | |
| schedule(); | |
| } | |
| /* | |
| * The only record we have of the real-time age of a | |
| * process, regardless of execs it's done, is start_time. | |
| * All the past CPU time is accumulated in signal_struct | |
| * from sister threads now dead. But in this non-leader | |
| * exec, nothing survives from the original leader thread, | |
| * whose birth marks the true age of this process now. | |
| * When we take on its identity by switching to its PID, we | |
| * also take its birthdate (always earlier than our own). | |
| */ | |
| tsk->start_time = leader->start_time; | |
| BUG_ON(!same_thread_group(leader, tsk)); | |
| BUG_ON(has_group_leader_pid(tsk)); | |
| /* | |
| * An exec() starts a new thread group with the | |
| * TGID of the previous thread group. Rehash the | |
| * two threads with a switched PID, and release | |
| * the former thread group leader: | |
| */ | |
| /* Become a process group leader with the old leader's pid. | |
| * The old leader becomes a thread of the this thread group. | |
| * Note: The old leader also uses this pid until release_task | |
| * is called. Odd but simple and correct. | |
| */ | |
| detach_pid(tsk, PIDTYPE_PID); | |
| tsk->pid = leader->pid; | |
| attach_pid(tsk, PIDTYPE_PID, task_pid(leader)); | |
| transfer_pid(leader, tsk, PIDTYPE_PGID); | |
| transfer_pid(leader, tsk, PIDTYPE_SID); | |
| list_replace_rcu(&leader->tasks, &tsk->tasks); | |
| list_replace_init(&leader->sibling, &tsk->sibling); | |
| tsk->group_leader = tsk; | |
| leader->group_leader = tsk; | |
| tsk->exit_signal = SIGCHLD; | |
| BUG_ON(leader->exit_state != EXIT_ZOMBIE); | |
| leader->exit_state = EXIT_DEAD; | |
| write_unlock_irq(&tasklist_lock); | |
| release_task(leader); | |
| } | |
| sig->group_exit_task = NULL; | |
| sig->notify_count = 0; | |
| no_thread_group: | |
| if (current->mm) | |
| setmax_mm_hiwater_rss(&sig->maxrss, current->mm); | |
| exit_itimers(sig); | |
| flush_itimer_signals(); | |
| if (atomic_read(&oldsighand->count) != 1) { | |
| struct sighand_struct *newsighand; | |
| /* | |
| * This ->sighand is shared with the CLONE_SIGHAND | |
| * but not CLONE_THREAD task, switch to the new one. | |
| */ | |
| newsighand = kmem_cache_alloc(sighand_cachep, GFP_KERNEL); | |
| if (!newsighand) | |
| return -ENOMEM; | |
| atomic_set(&newsighand->count, 1); | |
| memcpy(newsighand->action, oldsighand->action, | |
| sizeof(newsighand->action)); | |
| write_lock_irq(&tasklist_lock); | |
| spin_lock(&oldsighand->siglock); | |
| rcu_assign_pointer(tsk->sighand, newsighand); | |
| spin_unlock(&oldsighand->siglock); | |
| write_unlock_irq(&tasklist_lock); | |
| __cleanup_sighand(oldsighand); | |
| } | |
| BUG_ON(!thread_group_leader(tsk)); | |
| return 0; | |
| } | |
| /* | |
| * These functions flushes out all traces of the currently running executable | |
| * so that a new one can be started | |
| */ | |
| static void flush_old_files(struct files_struct * files) | |
| { | |
| long j = -1; | |
| struct fdtable *fdt; | |
| spin_lock(&files->file_lock); | |
| for (;;) { | |
| unsigned long set, i; | |
| j++; | |
| i = j * __NFDBITS; | |
| fdt = files_fdtable(files); | |
| if (i >= fdt->max_fds) | |
| break; | |
| set = fdt->close_on_exec->fds_bits[j]; | |
| if (!set) | |
| continue; | |
| fdt->close_on_exec->fds_bits[j] = 0; | |
| spin_unlock(&files->file_lock); | |
| for ( ; set ; i++,set >>= 1) { | |
| if (set & 1) { | |
| sys_close(i); | |
| } | |
| } | |
| spin_lock(&files->file_lock); | |
| } | |
| spin_unlock(&files->file_lock); | |
| } | |
| char *get_task_comm(char *buf, struct task_struct *tsk) | |
| { | |
| /* buf must be at least sizeof(tsk->comm) in size */ | |
| task_lock(tsk); | |
| strncpy(buf, tsk->comm, sizeof(tsk->comm)); | |
| task_unlock(tsk); | |
| return buf; | |
| } | |
| void set_task_comm(struct task_struct *tsk, char *buf) | |
| { | |
| task_lock(tsk); | |
| /* | |
| * Threads may access current->comm without holding | |
| * the task lock, so write the string carefully. | |
| * Readers without a lock may see incomplete new | |
| * names but are safe from non-terminating string reads. | |
| */ | |
| memset(tsk->comm, 0, TASK_COMM_LEN); | |
| wmb(); | |
| strlcpy(tsk->comm, buf, sizeof(tsk->comm)); | |
| task_unlock(tsk); | |
| perf_event_comm(tsk); | |
| } | |
| int flush_old_exec(struct linux_binprm * bprm) | |
| { | |
| int retval; | |
| /* | |
| * Make sure we have a private signal table and that | |
| * we are unassociated from the previous thread group. | |
| */ | |
| retval = de_thread(current); | |
| if (retval) | |
| goto out; | |
| set_mm_exe_file(bprm->mm, bprm->file); | |
| /* | |
| * Release all of the old mmap stuff | |
| */ | |
| retval = exec_mmap(bprm->mm); | |
| if (retval) | |
| goto out; | |
| bprm->mm = NULL; /* We're using it now */ | |
| current->flags &= ~(PF_RANDOMIZE | PF_KTHREAD); | |
| flush_thread(); | |
| current->personality &= ~bprm->per_clear; | |
| return 0; | |
| out: | |
| return retval; | |
| } | |
| EXPORT_SYMBOL(flush_old_exec); | |
| void setup_new_exec(struct linux_binprm * bprm) | |
| { | |
| int i, ch; | |
| const char *name; | |
| char tcomm[sizeof(current->comm)]; | |
| arch_pick_mmap_layout(current->mm); | |
| /* This is the point of no return */ | |
| current->sas_ss_sp = current->sas_ss_size = 0; | |
| if (current_euid() == current_uid() && current_egid() == current_gid()) | |
| set_dumpable(current->mm, 1); | |
| else | |
| set_dumpable(current->mm, suid_dumpable); | |
| name = bprm->filename; | |
| /* Copies the binary name from after last slash */ | |
| for (i=0; (ch = *(name++)) != '\0';) { | |
| if (ch == '/') | |
| i = 0; /* overwrite what we wrote */ | |
| else | |
| if (i < (sizeof(tcomm) - 1)) | |
| tcomm[i++] = ch; | |
| } | |
| tcomm[i] = '\0'; | |
| set_task_comm(current, tcomm); | |
| /* Set the new mm task size. We have to do that late because it may | |
| * depend on TIF_32BIT which is only updated in flush_thread() on | |
| * some architectures like powerpc | |
| */ | |
| current->mm->task_size = TASK_SIZE; | |
| /* install the new credentials */ | |
| if (bprm->cred->uid != current_euid() || | |
| bprm->cred->gid != current_egid()) { | |
| current->pdeath_signal = 0; | |
| } else if (file_permission(bprm->file, MAY_READ) || | |
| bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP) { | |
| set_dumpable(current->mm, suid_dumpable); | |
| } | |
| /* | |
| * Flush performance counters when crossing a | |
| * security domain: | |
| */ | |
| if (!get_dumpable(current->mm)) | |
| perf_event_exit_task(current); | |
| /* An exec changes our domain. We are no longer part of the thread | |
| group */ | |
| current->self_exec_id++; | |
| flush_signal_handlers(current, 0); | |
| flush_old_files(current->files); | |
| } | |
| EXPORT_SYMBOL(setup_new_exec); | |
| /* | |
| * Prepare credentials and lock ->cred_guard_mutex. | |
| * install_exec_creds() commits the new creds and drops the lock. | |
| * Or, if exec fails before, free_bprm() should release ->cred and | |
| * and unlock. | |
| */ | |
| int prepare_bprm_creds(struct linux_binprm *bprm) | |
| { | |
| if (mutex_lock_interruptible(¤t->signal->cred_guard_mutex)) | |
| return -ERESTARTNOINTR; | |
| bprm->cred = prepare_exec_creds(); | |
| if (likely(bprm->cred)) | |
| return 0; | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| return -ENOMEM; | |
| } | |
| void free_bprm(struct linux_binprm *bprm) | |
| { | |
| free_arg_pages(bprm); | |
| if (bprm->cred) { | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| abort_creds(bprm->cred); | |
| } | |
| kfree(bprm); | |
| } | |
| /* | |
| * install the new credentials for this executable | |
| */ | |
| void install_exec_creds(struct linux_binprm *bprm) | |
| { | |
| security_bprm_committing_creds(bprm); | |
| commit_creds(bprm->cred); | |
| bprm->cred = NULL; | |
| /* | |
| * cred_guard_mutex must be held at least to this point to prevent | |
| * ptrace_attach() from altering our determination of the task's | |
| * credentials; any time after this it may be unlocked. | |
| */ | |
| security_bprm_committed_creds(bprm); | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| } | |
| EXPORT_SYMBOL(install_exec_creds); | |
| /* | |
| * determine how safe it is to execute the proposed program | |
| * - the caller must hold ->cred_guard_mutex to protect against | |
| * PTRACE_ATTACH | |
| */ | |
| int check_unsafe_exec(struct linux_binprm *bprm) | |
| { | |
| struct task_struct *p = current, *t; | |
| unsigned n_fs; | |
| int res = 0; | |
| bprm->unsafe = tracehook_unsafe_exec(p); | |
| n_fs = 1; | |
| spin_lock(&p->fs->lock); | |
| rcu_read_lock(); | |
| for (t = next_thread(p); t != p; t = next_thread(t)) { | |
| if (t->fs == p->fs) | |
| n_fs++; | |
| } | |
| rcu_read_unlock(); | |
| if (p->fs->users > n_fs) { | |
| bprm->unsafe |= LSM_UNSAFE_SHARE; | |
| } else { | |
| res = -EAGAIN; | |
| if (!p->fs->in_exec) { | |
| p->fs->in_exec = 1; | |
| res = 1; | |
| } | |
| } | |
| spin_unlock(&p->fs->lock); | |
| return res; | |
| } | |
| /* | |
| * Fill the binprm structure from the inode. | |
| * Check permissions, then read the first 128 (BINPRM_BUF_SIZE) bytes | |
| * | |
| * This may be called multiple times for binary chains (scripts for example). | |
| */ | |
| int prepare_binprm(struct linux_binprm *bprm) | |
| { | |
| umode_t mode; | |
| struct inode * inode = bprm->file->f_path.dentry->d_inode; | |
| int retval; | |
| mode = inode->i_mode; | |
| if (bprm->file->f_op == NULL) | |
| return -EACCES; | |
| /* clear any previous set[ug]id data from a previous binary */ | |
| bprm->cred->euid = current_euid(); | |
| bprm->cred->egid = current_egid(); | |
| if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)) { | |
| /* Set-uid? */ | |
| if (mode & S_ISUID) { | |
| bprm->per_clear |= PER_CLEAR_ON_SETID; | |
| bprm->cred->euid = inode->i_uid; | |
| } | |
| /* Set-gid? */ | |
| /* | |
| * If setgid is set but no group execute bit then this | |
| * is a candidate for mandatory locking, not a setgid | |
| * executable. | |
| */ | |
| if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) { | |
| bprm->per_clear |= PER_CLEAR_ON_SETID; | |
| bprm->cred->egid = inode->i_gid; | |
| } | |
| } | |
| /* fill in binprm security blob */ | |
| retval = security_bprm_set_creds(bprm); | |
| if (retval) | |
| return retval; | |
| bprm->cred_prepared = 1; | |
| memset(bprm->buf, 0, BINPRM_BUF_SIZE); | |
| return kernel_read(bprm->file, 0, bprm->buf, BINPRM_BUF_SIZE); | |
| } | |
| EXPORT_SYMBOL(prepare_binprm); | |
| /* | |
| * Arguments are '\0' separated strings found at the location bprm->p | |
| * points to; chop off the first by relocating brpm->p to right after | |
| * the first '\0' encountered. | |
| */ | |
| int remove_arg_zero(struct linux_binprm *bprm) | |
| { | |
| int ret = 0; | |
| unsigned long offset; | |
| char *kaddr; | |
| struct page *page; | |
| if (!bprm->argc) | |
| return 0; | |
| do { | |
| offset = bprm->p & ~PAGE_MASK; | |
| page = get_arg_page(bprm, bprm->p, 0); | |
| if (!page) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| kaddr = kmap_atomic(page, KM_USER0); | |
| for (; offset < PAGE_SIZE && kaddr[offset]; | |
| offset++, bprm->p++) | |
| ; | |
| kunmap_atomic(kaddr, KM_USER0); | |
| put_arg_page(page); | |
| if (offset == PAGE_SIZE) | |
| free_arg_page(bprm, (bprm->p >> PAGE_SHIFT) - 1); | |
| } while (offset == PAGE_SIZE); | |
| bprm->p++; | |
| bprm->argc--; | |
| ret = 0; | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(remove_arg_zero); | |
| /* | |
| * cycle the list of binary formats handler, until one recognizes the image | |
| */ | |
| int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) | |
| { | |
| unsigned int depth = bprm->recursion_depth; | |
| int try,retval; | |
| struct linux_binfmt *fmt; | |
| retval = security_bprm_check(bprm); | |
| if (retval) | |
| return retval; | |
| /* kernel module loader fixup */ | |
| /* so we don't try to load run modprobe in kernel space. */ | |
| set_fs(USER_DS); | |
| retval = audit_bprm(bprm); | |
| if (retval) | |
| return retval; | |
| retval = -ENOENT; | |
| for (try=0; try<2; try++) { | |
| read_lock(&binfmt_lock); | |
| list_for_each_entry(fmt, &formats, lh) { | |
| int (*fn)(struct linux_binprm *, struct pt_regs *) = fmt->load_binary; | |
| if (!fn) | |
| continue; | |
| if (!try_module_get(fmt->module)) | |
| continue; | |
| read_unlock(&binfmt_lock); | |
| retval = fn(bprm, regs); | |
| /* | |
| * Restore the depth counter to its starting value | |
| * in this call, so we don't have to rely on every | |
| * load_binary function to restore it on return. | |
| */ | |
| bprm->recursion_depth = depth; | |
| if (retval >= 0) { | |
| if (depth == 0) | |
| tracehook_report_exec(fmt, bprm, regs); | |
| put_binfmt(fmt); | |
| allow_write_access(bprm->file); | |
| if (bprm->file) | |
| fput(bprm->file); | |
| bprm->file = NULL; | |
| current->did_exec = 1; | |
| proc_exec_connector(current); | |
| return retval; | |
| } | |
| read_lock(&binfmt_lock); | |
| put_binfmt(fmt); | |
| if (retval != -ENOEXEC || bprm->mm == NULL) | |
| break; | |
| if (!bprm->file) { | |
| read_unlock(&binfmt_lock); | |
| return retval; | |
| } | |
| } | |
| read_unlock(&binfmt_lock); | |
| if (retval != -ENOEXEC || bprm->mm == NULL) { | |
| break; | |
| #ifdef CONFIG_MODULES | |
| } else { | |
| #define printable(c) (((c)=='\t') || ((c)=='\n') || (0x20<=(c) && (c)<=0x7e)) | |
| if (printable(bprm->buf[0]) && | |
| printable(bprm->buf[1]) && | |
| printable(bprm->buf[2]) && | |
| printable(bprm->buf[3])) | |
| break; /* -ENOEXEC */ | |
| request_module("binfmt-%04x", *(unsigned short *)(&bprm->buf[2])); | |
| #endif | |
| } | |
| } | |
| return retval; | |
| } | |
| EXPORT_SYMBOL(search_binary_handler); | |
| /* | |
| * sys_execve() executes a new program. | |
| */ | |
| int do_execve(const char * filename, | |
| const char __user *const __user *argv, | |
| const char __user *const __user *envp, | |
| struct pt_regs * regs) | |
| { | |
| struct linux_binprm *bprm; | |
| struct file *file; | |
| struct files_struct *displaced; | |
| bool clear_in_exec; | |
| int retval; | |
| retval = unshare_files(&displaced); | |
| if (retval) | |
| goto out_ret; | |
| retval = -ENOMEM; | |
| bprm = kzalloc(sizeof(*bprm), GFP_KERNEL); | |
| if (!bprm) | |
| goto out_files; | |
| retval = prepare_bprm_creds(bprm); | |
| if (retval) | |
| goto out_free; | |
| retval = check_unsafe_exec(bprm); | |
| if (retval < 0) | |
| goto out_free; | |
| clear_in_exec = retval; | |
| current->in_execve = 1; | |
| file = open_exec(filename); | |
| retval = PTR_ERR(file); | |
| if (IS_ERR(file)) | |
| goto out_unmark; | |
| sched_exec(); | |
| bprm->file = file; | |
| bprm->filename = filename; | |
| bprm->interp = filename; | |
| retval = bprm_mm_init(bprm); | |
| if (retval) | |
| goto out_file; | |
| bprm->argc = count(argv, MAX_ARG_STRINGS); | |
| if ((retval = bprm->argc) < 0) | |
| goto out; | |
| bprm->envc = count(envp, MAX_ARG_STRINGS); | |
| if ((retval = bprm->envc) < 0) | |
| goto out; | |
| retval = prepare_binprm(bprm); | |
| if (retval < 0) | |
| goto out; | |
| retval = copy_strings_kernel(1, &bprm->filename, bprm); | |
| if (retval < 0) | |
| goto out; | |
| bprm->exec = bprm->p; | |
| retval = copy_strings(bprm->envc, envp, bprm); | |
| if (retval < 0) | |
| goto out; | |
| retval = copy_strings(bprm->argc, argv, bprm); | |
| if (retval < 0) | |
| goto out; | |
| retval = search_binary_handler(bprm,regs); | |
| if (retval < 0) | |
| goto out; | |
| /* execve succeeded */ | |
| current->fs->in_exec = 0; | |
| current->in_execve = 0; | |
| acct_update_integrals(current); | |
| free_bprm(bprm); | |
| if (displaced) | |
| put_files_struct(displaced); | |
| return retval; | |
| out: | |
| if (bprm->mm) | |
| mmput (bprm->mm); | |
| out_file: | |
| if (bprm->file) { | |
| allow_write_access(bprm->file); | |
| fput(bprm->file); | |
| } | |
| out_unmark: | |
| if (clear_in_exec) | |
| current->fs->in_exec = 0; | |
| current->in_execve = 0; | |
| out_free: | |
| free_bprm(bprm); | |
| out_files: | |
| if (displaced) | |
| reset_files_struct(displaced); | |
| out_ret: | |
| return retval; | |
| } | |
| void set_binfmt(struct linux_binfmt *new) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| if (mm->binfmt) | |
| module_put(mm->binfmt->module); | |
| mm->binfmt = new; | |
| if (new) | |
| __module_get(new->module); | |
| } | |
| EXPORT_SYMBOL(set_binfmt); | |
| static int expand_corename(struct core_name *cn) | |
| { | |
| char *old_corename = cn->corename; | |
| cn->size = CORENAME_MAX_SIZE * atomic_inc_return(&call_count); | |
| cn->corename = krealloc(old_corename, cn->size, GFP_KERNEL); | |
| if (!cn->corename) { | |
| kfree(old_corename); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static int cn_printf(struct core_name *cn, const char *fmt, ...) | |
| { | |
| char *cur; | |
| int need; | |
| int ret; | |
| va_list arg; | |
| va_start(arg, fmt); | |
| need = vsnprintf(NULL, 0, fmt, arg); | |
| va_end(arg); | |
| if (likely(need < cn->size - cn->used - 1)) | |
| goto out_printf; | |
| ret = expand_corename(cn); | |
| if (ret) | |
| goto expand_fail; | |
| out_printf: | |
| cur = cn->corename + cn->used; | |
| va_start(arg, fmt); | |
| vsnprintf(cur, need + 1, fmt, arg); | |
| va_end(arg); | |
| cn->used += need; | |
| return 0; | |
| expand_fail: | |
| return ret; | |
| } | |
| /* format_corename will inspect the pattern parameter, and output a | |
| * name into corename, which must have space for at least | |
| * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. | |
| */ | |
| static int format_corename(struct core_name *cn, long signr) | |
| { | |
| const struct cred *cred = current_cred(); | |
| const char *pat_ptr = core_pattern; | |
| int ispipe = (*pat_ptr == '|'); | |
| int pid_in_pattern = 0; | |
| int err = 0; | |
| cn->size = CORENAME_MAX_SIZE * atomic_read(&call_count); | |
| cn->corename = kmalloc(cn->size, GFP_KERNEL); | |
| cn->used = 0; | |
| if (!cn->corename) | |
| return -ENOMEM; | |
| /* Repeat as long as we have more pattern to process and more output | |
| space */ | |
| while (*pat_ptr) { | |
| if (*pat_ptr != '%') { | |
| if (*pat_ptr == 0) | |
| goto out; | |
| err = cn_printf(cn, "%c", *pat_ptr++); | |
| } else { | |
| switch (*++pat_ptr) { | |
| /* single % at the end, drop that */ | |
| case 0: | |
| goto out; | |
| /* Double percent, output one percent */ | |
| case '%': | |
| err = cn_printf(cn, "%c", '%'); | |
| break; | |
| /* pid */ | |
| case 'p': | |
| pid_in_pattern = 1; | |
| err = cn_printf(cn, "%d", | |
| task_tgid_vnr(current)); | |
| break; | |
| /* uid */ | |
| case 'u': | |
| err = cn_printf(cn, "%d", cred->uid); | |
| break; | |
| /* gid */ | |
| case 'g': | |
| err = cn_printf(cn, "%d", cred->gid); | |
| break; | |
| /* signal that caused the coredump */ | |
| case 's': | |
| err = cn_printf(cn, "%ld", signr); | |
| break; | |
| /* UNIX time of coredump */ | |
| case 't': { | |
| struct timeval tv; | |
| do_gettimeofday(&tv); | |
| err = cn_printf(cn, "%lu", tv.tv_sec); | |
| break; | |
| } | |
| /* hostname */ | |
| case 'h': | |
| down_read(&uts_sem); | |
| err = cn_printf(cn, "%s", | |
| utsname()->nodename); | |
| up_read(&uts_sem); | |
| break; | |
| /* executable */ | |
| case 'e': | |
| err = cn_printf(cn, "%s", current->comm); | |
| break; | |
| /* core limit size */ | |
| case 'c': | |
| err = cn_printf(cn, "%lu", | |
| rlimit(RLIMIT_CORE)); | |
| break; | |
| default: | |
| break; | |
| } | |
| ++pat_ptr; | |
| } | |
| if (err) | |
| return err; | |
| } | |
| /* Backward compatibility with core_uses_pid: | |
| * | |
| * If core_pattern does not include a %p (as is the default) | |
| * and core_uses_pid is set, then .%pid will be appended to | |
| * the filename. Do not do this for piped commands. */ | |
| if (!ispipe && !pid_in_pattern && core_uses_pid) { | |
| err = cn_printf(cn, ".%d", task_tgid_vnr(current)); | |
| if (err) | |
| return err; | |
| } | |
| out: | |
| return ispipe; | |
| } | |
| static int zap_process(struct task_struct *start, int exit_code) | |
| { | |
| struct task_struct *t; | |
| int nr = 0; | |
| start->signal->flags = SIGNAL_GROUP_EXIT; | |
| start->signal->group_exit_code = exit_code; | |
| start->signal->group_stop_count = 0; | |
| t = start; | |
| do { | |
| if (t != current && t->mm) { | |
| sigaddset(&t->pending.signal, SIGKILL); | |
| signal_wake_up(t, 1); | |
| nr++; | |
| } | |
| } while_each_thread(start, t); | |
| return nr; | |
| } | |
| static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm, | |
| struct core_state *core_state, int exit_code) | |
| { | |
| struct task_struct *g, *p; | |
| unsigned long flags; | |
| int nr = -EAGAIN; | |
| spin_lock_irq(&tsk->sighand->siglock); | |
| if (!signal_group_exit(tsk->signal)) { | |
| mm->core_state = core_state; | |
| nr = zap_process(tsk, exit_code); | |
| } | |
| spin_unlock_irq(&tsk->sighand->siglock); | |
| if (unlikely(nr < 0)) | |
| return nr; | |
| if (atomic_read(&mm->mm_users) == nr + 1) | |
| goto done; | |
| /* | |
| * We should find and kill all tasks which use this mm, and we should | |
| * count them correctly into ->nr_threads. We don't take tasklist | |
| * lock, but this is safe wrt: | |
| * | |
| * fork: | |
| * None of sub-threads can fork after zap_process(leader). All | |
| * processes which were created before this point should be | |
| * visible to zap_threads() because copy_process() adds the new | |
| * process to the tail of init_task.tasks list, and lock/unlock | |
| * of ->siglock provides a memory barrier. | |
| * | |
| * do_exit: | |
| * The caller holds mm->mmap_sem. This means that the task which | |
| * uses this mm can't pass exit_mm(), so it can't exit or clear | |
| * its ->mm. | |
| * | |
| * de_thread: | |
| * It does list_replace_rcu(&leader->tasks, ¤t->tasks), | |
| * we must see either old or new leader, this does not matter. | |
| * However, it can change p->sighand, so lock_task_sighand(p) | |
| * must be used. Since p->mm != NULL and we hold ->mmap_sem | |
| * it can't fail. | |
| * | |
| * Note also that "g" can be the old leader with ->mm == NULL | |
| * and already unhashed and thus removed from ->thread_group. | |
| * This is OK, __unhash_process()->list_del_rcu() does not | |
| * clear the ->next pointer, we will find the new leader via | |
| * next_thread(). | |
| */ | |
| rcu_read_lock(); | |
| for_each_process(g) { | |
| if (g == tsk->group_leader) | |
| continue; | |
| if (g->flags & PF_KTHREAD) | |
| continue; | |
| p = g; | |
| do { | |
| if (p->mm) { | |
| if (unlikely(p->mm == mm)) { | |
| lock_task_sighand(p, &flags); | |
| nr += zap_process(p, exit_code); | |
| unlock_task_sighand(p, &flags); | |
| } | |
| break; | |
| } | |
| } while_each_thread(g, p); | |
| } | |
| rcu_read_unlock(); | |
| done: | |
| atomic_set(&core_state->nr_threads, nr); | |
| return nr; | |
| } | |
| static int coredump_wait(int exit_code, struct core_state *core_state) | |
| { | |
| struct task_struct *tsk = current; | |
| struct mm_struct *mm = tsk->mm; | |
| struct completion *vfork_done; | |
| int core_waiters = -EBUSY; | |
| init_completion(&core_state->startup); | |
| core_state->dumper.task = tsk; | |
| core_state->dumper.next = NULL; | |
| down_write(&mm->mmap_sem); | |
| if (!mm->core_state) | |
| core_waiters = zap_threads(tsk, mm, core_state, exit_code); | |
| up_write(&mm->mmap_sem); | |
| if (unlikely(core_waiters < 0)) | |
| goto fail; | |
| /* | |
| * Make sure nobody is waiting for us to release the VM, | |
| * otherwise we can deadlock when we wait on each other | |
| */ | |
| vfork_done = tsk->vfork_done; | |
| if (vfork_done) { | |
| tsk->vfork_done = NULL; | |
| complete(vfork_done); | |
| } | |
| if (core_waiters) | |
| wait_for_completion(&core_state->startup); | |
| fail: | |
| return core_waiters; | |
| } | |
| static void coredump_finish(struct mm_struct *mm) | |
| { | |
| struct core_thread *curr, *next; | |
| struct task_struct *task; | |
| next = mm->core_state->dumper.next; | |
| while ((curr = next) != NULL) { | |
| next = curr->next; | |
| task = curr->task; | |
| /* | |
| * see exit_mm(), curr->task must not see | |
| * ->task == NULL before we read ->next. | |
| */ | |
| smp_mb(); | |
| curr->task = NULL; | |
| wake_up_process(task); | |
| } | |
| mm->core_state = NULL; | |
| } | |
| /* | |
| * set_dumpable converts traditional three-value dumpable to two flags and | |
| * stores them into mm->flags. It modifies lower two bits of mm->flags, but | |
| * these bits are not changed atomically. So get_dumpable can observe the | |
| * intermediate state. To avoid doing unexpected behavior, get get_dumpable | |
| * return either old dumpable or new one by paying attention to the order of | |
| * modifying the bits. | |
| * | |
| * dumpable | mm->flags (binary) | |
| * old new | initial interim final | |
| * ---------+----------------------- | |
| * 0 1 | 00 01 01 | |
| * 0 2 | 00 10(*) 11 | |
| * 1 0 | 01 00 00 | |
| * 1 2 | 01 11 11 | |
| * 2 0 | 11 10(*) 00 | |
| * 2 1 | 11 11 01 | |
| * | |
| * (*) get_dumpable regards interim value of 10 as 11. | |
| */ | |
| void set_dumpable(struct mm_struct *mm, int value) | |
| { | |
| switch (value) { | |
| case 0: | |
| clear_bit(MMF_DUMPABLE, &mm->flags); | |
| smp_wmb(); | |
| clear_bit(MMF_DUMP_SECURELY, &mm->flags); | |
| break; | |
| case 1: | |
| set_bit(MMF_DUMPABLE, &mm->flags); | |
| smp_wmb(); | |
| clear_bit(MMF_DUMP_SECURELY, &mm->flags); | |
| break; | |
| case 2: | |
| set_bit(MMF_DUMP_SECURELY, &mm->flags); | |
| smp_wmb(); | |
| set_bit(MMF_DUMPABLE, &mm->flags); | |
| break; | |
| } | |
| } | |
| static int __get_dumpable(unsigned long mm_flags) | |
| { | |
| int ret; | |
| ret = mm_flags & MMF_DUMPABLE_MASK; | |
| return (ret >= 2) ? 2 : ret; | |
| } | |
| int get_dumpable(struct mm_struct *mm) | |
| { | |
| return __get_dumpable(mm->flags); | |
| } | |
| static void wait_for_dump_helpers(struct file *file) | |
| { | |
| struct pipe_inode_info *pipe; | |
| pipe = file->f_path.dentry->d_inode->i_pipe; | |
| pipe_lock(pipe); | |
| pipe->readers++; | |
| pipe->writers--; | |
| while ((pipe->readers > 1) && (!signal_pending(current))) { | |
| wake_up_interruptible_sync(&pipe->wait); | |
| kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); | |
| pipe_wait(pipe); | |
| } | |
| pipe->readers--; | |
| pipe->writers++; | |
| pipe_unlock(pipe); | |
| } | |
| /* | |
| * uhm_pipe_setup | |
| * helper function to customize the process used | |
| * to collect the core in userspace. Specifically | |
| * it sets up a pipe and installs it as fd 0 (stdin) | |
| * for the process. Returns 0 on success, or | |
| * PTR_ERR on failure. | |
| * Note that it also sets the core limit to 1. This | |
| * is a special value that we use to trap recursive | |
| * core dumps | |
| */ | |
| static int umh_pipe_setup(struct subprocess_info *info) | |
| { | |
| struct file *rp, *wp; | |
| struct fdtable *fdt; | |
| struct coredump_params *cp = (struct coredump_params *)info->data; | |
| struct files_struct *cf = current->files; | |
| wp = create_write_pipe(0); | |
| if (IS_ERR(wp)) | |
| return PTR_ERR(wp); | |
| rp = create_read_pipe(wp, 0); | |
| if (IS_ERR(rp)) { | |
| free_write_pipe(wp); | |
| return PTR_ERR(rp); | |
| } | |
| cp->file = wp; | |
| sys_close(0); | |
| fd_install(0, rp); | |
| spin_lock(&cf->file_lock); | |
| fdt = files_fdtable(cf); | |
| FD_SET(0, fdt->open_fds); | |
| FD_CLR(0, fdt->close_on_exec); | |
| spin_unlock(&cf->file_lock); | |
| /* and disallow core files too */ | |
| current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1}; | |
| return 0; | |
| } | |
| void do_coredump(long signr, int exit_code, struct pt_regs *regs) | |
| { | |
| struct core_state core_state; | |
| struct core_name cn; | |
| struct mm_struct *mm = current->mm; | |
| struct linux_binfmt * binfmt; | |
| const struct cred *old_cred; | |
| struct cred *cred; | |
| int retval = 0; | |
| int flag = 0; | |
| int ispipe; | |
| static atomic_t core_dump_count = ATOMIC_INIT(0); | |
| struct coredump_params cprm = { | |
| .signr = signr, | |
| .regs = regs, | |
| .limit = rlimit(RLIMIT_CORE), | |
| /* | |
| * We must use the same mm->flags while dumping core to avoid | |
| * inconsistency of bit flags, since this flag is not protected | |
| * by any locks. | |
| */ | |
| .mm_flags = mm->flags, | |
| }; | |
| audit_core_dumps(signr); | |
| binfmt = mm->binfmt; | |
| if (!binfmt || !binfmt->core_dump) | |
| goto fail; | |
| if (!__get_dumpable(cprm.mm_flags)) | |
| goto fail; | |
| cred = prepare_creds(); | |
| if (!cred) | |
| goto fail; | |
| /* | |
| * We cannot trust fsuid as being the "true" uid of the | |
| * process nor do we know its entire history. We only know it | |
| * was tainted so we dump it as root in mode 2. | |
| */ | |
| if (__get_dumpable(cprm.mm_flags) == 2) { | |
| /* Setuid core dump mode */ | |
| flag = O_EXCL; /* Stop rewrite attacks */ | |
| cred->fsuid = 0; /* Dump root private */ | |
| } | |
| retval = coredump_wait(exit_code, &core_state); | |
| if (retval < 0) | |
| goto fail_creds; | |
| old_cred = override_creds(cred); | |
| /* | |
| * Clear any false indication of pending signals that might | |
| * be seen by the filesystem code called to write the core file. | |
| */ | |
| clear_thread_flag(TIF_SIGPENDING); | |
| ispipe = format_corename(&cn, signr); | |
| if (ispipe == -ENOMEM) { | |
| printk(KERN_WARNING "format_corename failed\n"); | |
| printk(KERN_WARNING "Aborting core\n"); | |
| goto fail_corename; | |
| } | |
| if (ispipe) { | |
| int dump_count; | |
| char **helper_argv; | |
| if (cprm.limit == 1) { | |
| /* | |
| * Normally core limits are irrelevant to pipes, since | |
| * we're not writing to the file system, but we use | |
| * cprm.limit of 1 here as a speacial value. Any | |
| * non-1 limit gets set to RLIM_INFINITY below, but | |
| * a limit of 0 skips the dump. This is a consistent | |
| * way to catch recursive crashes. We can still crash | |
| * if the core_pattern binary sets RLIM_CORE = !1 | |
| * but it runs as root, and can do lots of stupid things | |
| * Note that we use task_tgid_vnr here to grab the pid | |
| * of the process group leader. That way we get the | |
| * right pid if a thread in a multi-threaded | |
| * core_pattern process dies. | |
| */ | |
| printk(KERN_WARNING | |
| "Process %d(%s) has RLIMIT_CORE set to 1\n", | |
| task_tgid_vnr(current), current->comm); | |
| printk(KERN_WARNING "Aborting core\n"); | |
| goto fail_unlock; | |
| } | |
| cprm.limit = RLIM_INFINITY; | |
| dump_count = atomic_inc_return(&core_dump_count); | |
| if (core_pipe_limit && (core_pipe_limit < dump_count)) { | |
| printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n", | |
| task_tgid_vnr(current), current->comm); | |
| printk(KERN_WARNING "Skipping core dump\n"); | |
| goto fail_dropcount; | |
| } | |
| helper_argv = argv_split(GFP_KERNEL, cn.corename+1, NULL); | |
| if (!helper_argv) { | |
| printk(KERN_WARNING "%s failed to allocate memory\n", | |
| __func__); | |
| goto fail_dropcount; | |
| } | |
| retval = call_usermodehelper_fns(helper_argv[0], helper_argv, | |
| NULL, UMH_WAIT_EXEC, umh_pipe_setup, | |
| NULL, &cprm); | |
| argv_free(helper_argv); | |
| if (retval) { | |
| printk(KERN_INFO "Core dump to %s pipe failed\n", | |
| cn.corename); | |
| goto close_fail; | |
| } | |
| } else { | |
| struct inode *inode; | |
| if (cprm.limit < binfmt->min_coredump) | |
| goto fail_unlock; | |
| cprm.file = filp_open(cn.corename, | |
| O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag, | |
| 0600); | |
| if (IS_ERR(cprm.file)) | |
| goto fail_unlock; | |
| inode = cprm.file->f_path.dentry->d_inode; | |
| if (inode->i_nlink > 1) | |
| goto close_fail; | |
| if (d_unhashed(cprm.file->f_path.dentry)) | |
| goto close_fail; | |
| /* | |
| * AK: actually i see no reason to not allow this for named | |
| * pipes etc, but keep the previous behaviour for now. | |
| */ | |
| if (!S_ISREG(inode->i_mode)) | |
| goto close_fail; | |
| /* | |
| * Dont allow local users get cute and trick others to coredump | |
| * into their pre-created files. | |
| */ | |
| if (inode->i_uid != current_fsuid()) | |
| goto close_fail; | |
| if (!cprm.file->f_op || !cprm.file->f_op->write) | |
| goto close_fail; | |
| if (do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file)) | |
| goto close_fail; | |
| } | |
| retval = binfmt->core_dump(&cprm); | |
| if (retval) | |
| current->signal->group_exit_code |= 0x80; | |
| if (ispipe && core_pipe_limit) | |
| wait_for_dump_helpers(cprm.file); | |
| close_fail: | |
| if (cprm.file) | |
| filp_close(cprm.file, NULL); | |
| fail_dropcount: | |
| if (ispipe) | |
| atomic_dec(&core_dump_count); | |
| fail_unlock: | |
| kfree(cn.corename); | |
| fail_corename: | |
| coredump_finish(mm); | |
| revert_creds(old_cred); | |
| fail_creds: | |
| put_cred(cred); | |
| fail: | |
| return; | |
| } | |
| /* | |
| * Core dumping helper functions. These are the only things you should | |
| * do on a core-file: use only these functions to write out all the | |
| * necessary info. | |
| */ | |
| int dump_write(struct file *file, const void *addr, int nr) | |
| { | |
| return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr; | |
| } | |
| EXPORT_SYMBOL(dump_write); | |
| int dump_seek(struct file *file, loff_t off) | |
| { | |
| int ret = 1; | |
| if (file->f_op->llseek && file->f_op->llseek != no_llseek) { | |
| if (file->f_op->llseek(file, off, SEEK_CUR) < 0) | |
| return 0; | |
| } else { | |
| char *buf = (char *)get_zeroed_page(GFP_KERNEL); | |
| if (!buf) | |
| return 0; | |
| while (off > 0) { | |
| unsigned long n = off; | |
| if (n > PAGE_SIZE) | |
| n = PAGE_SIZE; | |
| if (!dump_write(file, buf, n)) { | |
| ret = 0; | |
| break; | |
| } | |
| off -= n; | |
| } | |
| free_page((unsigned long)buf); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(dump_seek); |