| /* |
| * Copyright (C) 2015, 2016 Zodiac Inflight Innovations |
| * |
| * Based on an original 'vf610-twr.dts' which is Copyright 2015, |
| * Freescale Semiconductor, Inc. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "vf610.dtsi" |
| |
| / { |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x20000000>; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pinctrl_leds_debug>; |
| pinctrl-names = "default"; |
| |
| debug { |
| label = "zii:green:debug1"; |
| gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_3v3_mcu"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| usb0_vbus: regulator-usb0-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-0 = <&pinctrl_usb_vbus>; |
| regulator-name = "usb_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| gpio = <&gpio0 6 0>; |
| }; |
| }; |
| |
| &adc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc0_ad5>; |
| vref-supply = <®_vcc_3v3_mcu>; |
| status = "okay"; |
| }; |
| |
| &edma0 { |
| status = "okay"; |
| }; |
| |
| &edma1 { |
| status = "okay"; |
| }; |
| |
| &esdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &fec0 { |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec0>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <100>; |
| full-duplex; |
| }; |
| |
| mdio1: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c0>; |
| pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| lm75@48 { |
| compatible = "national,lm75"; |
| reg = <0x48>; |
| }; |
| |
| at24c04@50 { |
| compatible = "atmel,24c04"; |
| reg = <0x50>; |
| }; |
| |
| at24c04@52 { |
| compatible = "atmel,24c04"; |
| reg = <0x52>; |
| }; |
| |
| ds1682@6b { |
| compatible = "dallas,ds1682"; |
| reg = <0x6b>; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart0>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &usbdev0 { |
| disable-over-current; |
| vbus-supply = <&usb0_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbmisc0 { |
| status = "okay"; |
| }; |
| |
| &usbmisc1 { |
| status = "okay"; |
| }; |
| |
| &usbphy0 { |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| status = "okay"; |
| }; |
| |
| &tempsensor { |
| io-channels = <&adc0 16>; |
| }; |
| |
| &iomuxc { |
| pinctrl_adc0_ad5: adc0ad5grp { |
| fsl,pins = < |
| VF610_PAD_PTC30__ADC0_SE5 0x00a1 |
| >; |
| }; |
| |
| pinctrl_dspi0: dspi0grp { |
| fsl,pins = < |
| VF610_PAD_PTB18__DSPI0_CS1 0x1182 |
| VF610_PAD_PTB19__DSPI0_CS0 0x1182 |
| VF610_PAD_PTB20__DSPI0_SIN 0x1181 |
| VF610_PAD_PTB21__DSPI0_SOUT 0x1182 |
| VF610_PAD_PTB22__DSPI0_SCK 0x1182 |
| >; |
| }; |
| |
| pinctrl_dspi2: dspi2grp { |
| fsl,pins = < |
| VF610_PAD_PTD31__DSPI2_CS1 0x1182 |
| VF610_PAD_PTD30__DSPI2_CS0 0x1182 |
| VF610_PAD_PTD29__DSPI2_SIN 0x1181 |
| VF610_PAD_PTD28__DSPI2_SOUT 0x1182 |
| VF610_PAD_PTD27__DSPI2_SCK 0x1182 |
| >; |
| }; |
| |
| pinctrl_esdhc1: esdhc1grp { |
| fsl,pins = < |
| VF610_PAD_PTA24__ESDHC1_CLK 0x31ef |
| VF610_PAD_PTA25__ESDHC1_CMD 0x31ef |
| VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |
| VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef |
| VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef |
| VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef |
| VF610_PAD_PTA7__GPIO_134 0x219d |
| >; |
| }; |
| |
| pinctrl_fec0: fec0grp { |
| fsl,pins = < |
| VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 |
| VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 |
| VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 |
| VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 |
| VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 |
| VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 |
| VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 |
| VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 |
| VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| VF610_PAD_PTA6__RMII_CLKIN 0x30d1 |
| VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 |
| VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 |
| VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 |
| VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 |
| VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 |
| VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 |
| VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 |
| VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 |
| VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 |
| >; |
| }; |
| |
| pinctrl_gpio_spi0: pinctrl-gpio-spi0 { |
| fsl,pins = < |
| VF610_PAD_PTB22__GPIO_44 0x33e2 |
| VF610_PAD_PTB21__GPIO_43 0x33e2 |
| VF610_PAD_PTB20__GPIO_42 0x33e1 |
| VF610_PAD_PTB19__GPIO_41 0x33e2 |
| VF610_PAD_PTB18__GPIO_40 0x33e2 |
| >; |
| }; |
| |
| pinctrl_gpio_switch0: pinctrl-gpio-switch0 { |
| fsl,pins = < |
| VF610_PAD_PTB5__GPIO_27 0x219d |
| >; |
| }; |
| |
| pinctrl_gpio_switch1: pinctrl-gpio-switch1 { |
| fsl,pins = < |
| VF610_PAD_PTB4__GPIO_26 0x219d |
| >; |
| }; |
| |
| pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { |
| fsl,pins = < |
| VF610_PAD_PTE14__GPIO_119 0x31c2 |
| >; |
| }; |
| |
| pinctrl_i2c0: i2c0grp { |
| fsl,pins = < |
| VF610_PAD_PTB14__I2C0_SCL 0x37ff |
| VF610_PAD_PTB15__I2C0_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_i2c0_gpio: i2c0grp-gpio { |
| fsl,pins = < |
| VF610_PAD_PTB14__GPIO_36 0x31c2 |
| VF610_PAD_PTB15__GPIO_37 0x31c2 |
| >; |
| }; |
| |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| VF610_PAD_PTB16__I2C1_SCL 0x37ff |
| VF610_PAD_PTB17__I2C1_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| VF610_PAD_PTA22__I2C2_SCL 0x37ff |
| VF610_PAD_PTA23__I2C2_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_leds_debug: pinctrl-leds-debug { |
| fsl,pins = < |
| VF610_PAD_PTD20__GPIO_74 0x31c2 |
| >; |
| }; |
| |
| pinctrl_qspi0: qspi0grp { |
| fsl,pins = < |
| VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 |
| VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff |
| VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 |
| VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 |
| VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 |
| VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 |
| >; |
| }; |
| |
| pinctrl_uart0: uart0grp { |
| fsl,pins = < |
| VF610_PAD_PTB10__UART0_TX 0x21a2 |
| VF610_PAD_PTB11__UART0_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| VF610_PAD_PTB23__UART1_TX 0x21a2 |
| VF610_PAD_PTB24__UART1_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| VF610_PAD_PTD0__UART2_TX 0x21a2 |
| VF610_PAD_PTD1__UART2_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_usb_vbus: pinctrl-usb-vbus { |
| fsl,pins = < |
| VF610_PAD_PTA16__GPIO_6 0x31c2 |
| >; |
| }; |
| |
| pinctrl_usb0_host: usb0-host-grp { |
| fsl,pins = < |
| VF610_PAD_PTD6__GPIO_85 0x0062 |
| >; |
| }; |
| }; |
