| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| |
| #include "qcom-ipq4019.dtsi" |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; |
| |
| aliases { |
| serial0 = &blsp1_uart1; |
| serial1 = &blsp1_uart2; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x10000000>; /* 256MB */ |
| }; |
| |
| soc { |
| pinctrl@1000000 { |
| serial_0_pins: serial0-pinmux { |
| pins = "gpio16", "gpio17"; |
| function = "blsp_uart0"; |
| bias-disable; |
| }; |
| |
| serial_1_pins: serial1-pinmux { |
| pins = "gpio8", "gpio9", |
| "gpio10", "gpio11"; |
| function = "blsp_uart1"; |
| bias-disable; |
| }; |
| |
| spi_0_pins: spi-0-pinmux { |
| pinmux { |
| function = "blsp_spi0"; |
| pins = "gpio13", "gpio14", "gpio15"; |
| bias-disable; |
| }; |
| pinmux_cs { |
| function = "gpio"; |
| pins = "gpio12"; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| i2c_0_pins: i2c-0-pinmux { |
| pins = "gpio20", "gpio21"; |
| function = "blsp_i2c0"; |
| bias-disable; |
| }; |
| |
| nand_pins: nand-pins { |
| pins = "gpio53", "gpio55", "gpio56", |
| "gpio57", "gpio58", "gpio59", |
| "gpio60", "gpio62", "gpio63", |
| "gpio64", "gpio65", "gpio66", |
| "gpio67", "gpio68", "gpio69"; |
| function = "qpic"; |
| }; |
| }; |
| |
| serial@78af000 { |
| pinctrl-0 = <&serial_0_pins>; |
| pinctrl-names = "default"; |
| status = "ok"; |
| }; |
| |
| serial@78b0000 { |
| pinctrl-0 = <&serial_1_pins>; |
| pinctrl-names = "default"; |
| status = "ok"; |
| }; |
| |
| dma@7884000 { |
| status = "ok"; |
| }; |
| |
| spi@78b5000 { /* BLSP1 QUP1 */ |
| pinctrl-0 = <&spi_0_pins>; |
| pinctrl-names = "default"; |
| status = "ok"; |
| cs-gpios = <&tlmm 12 0>; |
| |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| compatible = "n25q128a11"; |
| spi-max-frequency = <24000000>; |
| }; |
| }; |
| |
| pci@40000000 { |
| status = "ok"; |
| perst-gpio = <&tlmm 38 0x1>; |
| }; |
| |
| qpic-nand@79b0000 { |
| pinctrl-0 = <&nand_pins>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| }; |