| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| #include "omap2420-n8x0-common.dtsi" |
| |
| / { |
| model = "Nokia N810"; |
| compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; |
| |
| vio_ape: vio_ape { |
| compatible = "regulator-fixed"; |
| regulator-name = "vio_ape"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| v28_aic: v28_aic { |
| compatible = "regulator-fixed"; |
| regulator-name = "v28_aic"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| }; |
| |
| &omap2420_pmx { |
| mcbsp2_pins: mcbsp2_pins { |
| pinctrl-single,pins = < |
| OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */ |
| OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */ |
| OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */ |
| OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */ |
| >; |
| }; |
| |
| aic33_pins: aic33_pins { |
| pinctrl-single,pins = < |
| OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */ |
| OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */ |
| >; |
| }; |
| }; |
| |
| &i2c2 { |
| aic33@18 { |
| compatible = "ti,tlv320aic33"; |
| reg = <0x18>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&aic33_pins>; |
| |
| gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ |
| |
| ai3x-gpio-func = < |
| 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ |
| 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ |
| >; |
| ai3x-micbias-vg = <1>; /* 2V */ |
| |
| AVDD-supply = <&v28_aic>; |
| DRVDD-supply = <&v28_aic>; |
| IOVDD-supply = <&vio_ape>; |
| DVDD-supply = <&vio_ape>; |
| |
| assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>; |
| assigned-clock-parents = <&func_96m_ck>; |
| assigned-clock-rates = <0>, <12000000>; |
| }; |
| }; |
| |
| &mcbsp2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp2_pins>; |
| |
| status = "okay"; |
| }; |
