arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts - linux-mtk - Git at Google

 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;
 #include "imx6ul.dtsi"
 #include "imx6ul-tx6ul.dtsi"

 / {
 	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
 	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";

 	aliases {
 		lcdif-24bit-pins-a = &pinctrl_disp0_3;
 		mmc0 = &usdhc1;
 		/delete-property/ mmc1;
 		serial2 = &uart3;
 		serial4 = &uart5;
 	};
 	/delete-node/ sound;
 };

 &can1 {
 	xceiver-supply = <&reg_3v3>;
 };

 &can2 {
 	xceiver-supply = <&reg_3v3>;
 };

 &ds1339 {
 	status = "disabled";
 };

 &fec1 {
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
 	/delete-node/ mdio;
 };

 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "okay";

 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		etnphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_etnphy0_int>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
 			status = "okay";
 		};

 		etnphy1: ethernet-phy@2 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <2>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_etnphy1_int>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
 			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
 			status = "okay";
 		};
 	};
 };

 &i2c_gpio {
 	status = "disabled";
 };

 &i2c2 {
 	/delete-node/ codec@a;
 	/delete-node/ touchscreen@48;

 	rtc: mcp7940x@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
 };

 &kpp {
 	status = "disabled";
 };

 &lcdif {
 	pinctrl-0 = <&pinctrl_disp0_3>;
 };

 &reg_usbotg_vbus{
 	status = "disabled";
 };

 &usdhc1 {
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	non-removable;
 	/delete-property/ cd-gpios;
 	cap-sdio-irq;
 };

 &uart1 {
 	pinctrl-0 = <&pinctrl_uart1>;
 	/delete-property/ uart-has-rtscts;
 };

 &uart2 {
 	pinctrl-0 = <&pinctrl_uart2>;
 	/delete-property/ uart-has-rtscts;
 	status = "okay";
 };

 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };

 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };

 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
 };

 &uart6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart6>;
 	status = "okay";
 };

 &uart7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart7>;
 	status = "okay";
 };

 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart8>;
 	status = "disabled"; /* conflicts with LCDIF */
 };

 &iomuxc {
 	hoggrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
 		>;
 	};

 	pinctrl_disp0_3: disp0grp-3 {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
 			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
 			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
 			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
 			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
 			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
 			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
 			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
 			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
 			/* LCD_DATA08..09 not wired */
 			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
 			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
 			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
 			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
 			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
 			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
 			/* LCD_DATA16..17 not wired */
 			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
 			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
 			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
 			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
 			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
 			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
 		>;
 	};

 	pinctrl_enet2_mdio: enet2-mdiogrp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
 			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
 		>;
 	};

 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
 			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
 		>;
 	};

 	pinctrl_uart4: uart4grp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
 			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
 		>;
 	};

 	pinctrl_uart6: uart6grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
 			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
 		>;
 	};

 	pinctrl_uart7: uart7grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
 			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
 		>;
 	};

 	pinctrl_uart8: uart8grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
 			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
 		>;
 	};
 };
	/*
	* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;
	#include "imx6ul.dtsi"
	#include "imx6ul-tx6ul.dtsi"

	/ {
	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";

	aliases {
	lcdif-24bit-pins-a = &pinctrl_disp0_3;
	mmc0 = &usdhc1;
	/delete-property/ mmc1;
	serial2 = &uart3;
	serial4 = &uart5;
	};
	/delete-node/ sound;
	};

	&can1 {
	xceiver-supply = <&reg_3v3>;
	};

	&can2 {
	xceiver-supply = <&reg_3v3>;
	};

	&ds1339 {
	status = "disabled";
	};

	&fec1 {
	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
	/delete-node/ mdio;
	};

	&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
	phy-mode = "rmii";
	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
	phy-supply = <&reg_3v3_etn>;
	phy-handle = <&etnphy1>;
	status = "okay";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	etnphy0: ethernet-phy@0 {
	compatible = "ethernet-phy-ieee802.3-c22";
	reg = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_etnphy0_int>;
	interrupt-parent = <&gpio5>;
	interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
	interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
	status = "okay";
	};

	etnphy1: ethernet-phy@2 {
	compatible = "ethernet-phy-ieee802.3-c22";
	reg = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_etnphy1_int>;
	interrupt-parent = <&gpio4>;
	interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
	interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
	status = "okay";
	};
	};
	};

	&i2c_gpio {
	status = "disabled";
	};

	&i2c2 {
	/delete-node/ codec@a;
	/delete-node/ touchscreen@48;

	rtc: mcp7940x@6f {
	compatible = "microchip,mcp7940x";
	reg = <0x6f>;
	};
	};

	&kpp {
	status = "disabled";
	};

	&lcdif {
	pinctrl-0 = <&pinctrl_disp0_3>;
	};

	&reg_usbotg_vbus{
	status = "disabled";
	};

	&usdhc1 {
	pinctrl-0 = <&pinctrl_usdhc1>;
	non-removable;
	/delete-property/ cd-gpios;
	cap-sdio-irq;
	};

	&uart1 {
	pinctrl-0 = <&pinctrl_uart1>;
	/delete-property/ uart-has-rtscts;
	};

	&uart2 {
	pinctrl-0 = <&pinctrl_uart2>;
	/delete-property/ uart-has-rtscts;
	status = "okay";
	};

	&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
	};

	&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
	};

	&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
	};

	&uart6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart6>;
	status = "okay";
	};

	&uart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart7>;
	status = "okay";
	};

	&uart8 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart8>;
	status = "disabled"; /* conflicts with LCDIF */
	};

	&iomuxc {
	hoggrp {
	fsl,pins = <
	MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */
	>;
	};

	pinctrl_disp0_3: disp0grp-3 {
	fsl,pins = <
	MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
	MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
	MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
	MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
	MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
	MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
	MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
	MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
	MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
	MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
	/* LCD_DATA08..09 not wired */
	MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
	MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
	MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
	MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
	MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
	MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
	/* LCD_DATA16..17 not wired */
	MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
	MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
	MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
	MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
	MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
	MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
	>;
	};

	pinctrl_enet2_mdio: enet2-mdiogrp {
	fsl,pins = <
	MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0
	MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
	>;
	};

	pinctrl_uart3: uart3grp {
	fsl,pins = <
	MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0
	MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0
	>;
	};

	pinctrl_uart4: uart4grp {
	fsl,pins = <
	MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0
	MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0
	>;
	};

	pinctrl_uart6: uart6grp {
	fsl,pins = <
	MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0
	MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0
	>;
	};

	pinctrl_uart7: uart7grp {
	fsl,pins = <
	MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0
	MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0
	>;
	};

	pinctrl_uart8: uart8grp {
	fsl,pins = <
	MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0
	MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0
	>;
	};
	};