| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for the GR-Peach audiocamera shield expansion board |
| * |
| * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> |
| */ |
| |
| #include "r7s72100.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> |
| |
| / { |
| /* On-board camera clock. */ |
| camera_clk: camera_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <27000000>; |
| }; |
| }; |
| |
| &pinctrl { |
| i2c1_pins: i2c1 { |
| /* P1_2 as SCL; P1_3 as SDA */ |
| pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>; |
| }; |
| |
| vio_pins: vio { |
| /* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */ |
| pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */ |
| <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */ |
| <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */ |
| <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */ |
| <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */ |
| <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */ |
| <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */ |
| <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */ |
| <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */ |
| <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */ |
| <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */ |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| |
| status = "okay"; |
| clock-frequency = <100000>; |
| |
| camera@48 { |
| compatible = "aptina,mt9v111"; |
| reg = <0x48>; |
| |
| clocks = <&camera_clk>; |
| |
| port { |
| mt9v111_out: endpoint { |
| remote-endpoint = <&ceu_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ceu { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vio_pins>; |
| |
| status = "okay"; |
| |
| port { |
| ceu_in: endpoint { |
| hsync-active = <1>; |
| vsync-active = <1>; |
| bus-width = <8>; |
| pclk-sample = <1>; |
| remote-endpoint = <&mt9v111_out>; |
| }; |
| }; |
| }; |