| /* |
| * Intel MIC Platform Software Stack (MPSS) |
| * |
| * Copyright(c) 2016 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Intel Virtio Over PCIe (VOP) driver. |
| * |
| */ |
| #include <linux/sched.h> |
| #include <linux/poll.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <linux/mic_common.h> |
| #include "../common/mic_dev.h" |
| |
| #include <linux/mic_ioctl.h> |
| #include "vop_main.h" |
| |
| /* Helper API to obtain the VOP PCIe device */ |
| static inline struct device *vop_dev(struct vop_vdev *vdev) |
| { |
| return vdev->vpdev->dev.parent; |
| } |
| |
| /* Helper API to check if a virtio device is initialized */ |
| static inline int vop_vdev_inited(struct vop_vdev *vdev) |
| { |
| if (!vdev) |
| return -EINVAL; |
| /* Device has not been created yet */ |
| if (!vdev->dd || !vdev->dd->type) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, -EINVAL); |
| return -EINVAL; |
| } |
| /* Device has been removed/deleted */ |
| if (vdev->dd->type == -1) { |
| dev_dbg(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, -ENODEV); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static void _vop_notify(struct vringh *vrh) |
| { |
| struct vop_vringh *vvrh = container_of(vrh, struct vop_vringh, vrh); |
| struct vop_vdev *vdev = vvrh->vdev; |
| struct vop_device *vpdev = vdev->vpdev; |
| s8 db = vdev->dc->h2c_vdev_db; |
| |
| if (db != -1) |
| vpdev->hw_ops->send_intr(vpdev, db); |
| } |
| |
| static void vop_virtio_init_post(struct vop_vdev *vdev) |
| { |
| struct mic_vqconfig *vqconfig = mic_vq_config(vdev->dd); |
| struct vop_device *vpdev = vdev->vpdev; |
| int i, used_size; |
| |
| for (i = 0; i < vdev->dd->num_vq; i++) { |
| used_size = PAGE_ALIGN(sizeof(u16) * 3 + |
| sizeof(struct vring_used_elem) * |
| le16_to_cpu(vqconfig->num)); |
| if (!le64_to_cpu(vqconfig[i].used_address)) { |
| dev_warn(vop_dev(vdev), "used_address zero??\n"); |
| continue; |
| } |
| vdev->vvr[i].vrh.vring.used = |
| (void __force *)vpdev->hw_ops->ioremap( |
| vpdev, |
| le64_to_cpu(vqconfig[i].used_address), |
| used_size); |
| } |
| |
| vdev->dc->used_address_updated = 0; |
| |
| dev_info(vop_dev(vdev), "%s: device type %d LINKUP\n", |
| __func__, vdev->virtio_id); |
| } |
| |
| static inline void vop_virtio_device_reset(struct vop_vdev *vdev) |
| { |
| int i; |
| |
| dev_dbg(vop_dev(vdev), "%s: status %d device type %d RESET\n", |
| __func__, vdev->dd->status, vdev->virtio_id); |
| |
| for (i = 0; i < vdev->dd->num_vq; i++) |
| /* |
| * Avoid lockdep false positive. The + 1 is for the vop |
| * mutex which is held in the reset devices code path. |
| */ |
| mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); |
| |
| /* 0 status means "reset" */ |
| vdev->dd->status = 0; |
| vdev->dc->vdev_reset = 0; |
| vdev->dc->host_ack = 1; |
| |
| for (i = 0; i < vdev->dd->num_vq; i++) { |
| struct vringh *vrh = &vdev->vvr[i].vrh; |
| |
| vdev->vvr[i].vring.info->avail_idx = 0; |
| vrh->completed = 0; |
| vrh->last_avail_idx = 0; |
| vrh->last_used_idx = 0; |
| } |
| |
| for (i = 0; i < vdev->dd->num_vq; i++) |
| mutex_unlock(&vdev->vvr[i].vr_mutex); |
| } |
| |
| static void vop_virtio_reset_devices(struct vop_info *vi) |
| { |
| struct list_head *pos, *tmp; |
| struct vop_vdev *vdev; |
| |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { |
| vdev = list_entry(pos, struct vop_vdev, list); |
| vop_virtio_device_reset(vdev); |
| vdev->poll_wake = 1; |
| wake_up(&vdev->waitq); |
| } |
| } |
| |
| static void vop_bh_handler(struct work_struct *work) |
| { |
| struct vop_vdev *vdev = container_of(work, struct vop_vdev, |
| virtio_bh_work); |
| |
| if (vdev->dc->used_address_updated) |
| vop_virtio_init_post(vdev); |
| |
| if (vdev->dc->vdev_reset) |
| vop_virtio_device_reset(vdev); |
| |
| vdev->poll_wake = 1; |
| wake_up(&vdev->waitq); |
| } |
| |
| static irqreturn_t _vop_virtio_intr_handler(int irq, void *data) |
| { |
| struct vop_vdev *vdev = data; |
| struct vop_device *vpdev = vdev->vpdev; |
| |
| vpdev->hw_ops->ack_interrupt(vpdev, vdev->virtio_db); |
| schedule_work(&vdev->virtio_bh_work); |
| return IRQ_HANDLED; |
| } |
| |
| static int vop_virtio_config_change(struct vop_vdev *vdev, void *argp) |
| { |
| DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); |
| int ret = 0, retry, i; |
| struct vop_device *vpdev = vdev->vpdev; |
| struct vop_info *vi = dev_get_drvdata(&vpdev->dev); |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); |
| s8 db = bootparam->h2c_config_db; |
| |
| mutex_lock(&vi->vop_mutex); |
| for (i = 0; i < vdev->dd->num_vq; i++) |
| mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); |
| |
| if (db == -1 || vdev->dd->type == -1) { |
| ret = -EIO; |
| goto exit; |
| } |
| |
| memcpy(mic_vq_configspace(vdev->dd), argp, vdev->dd->config_len); |
| vdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; |
| vpdev->hw_ops->send_intr(vpdev, db); |
| |
| for (retry = 100; retry--;) { |
| ret = wait_event_timeout(wake, vdev->dc->guest_ack, |
| msecs_to_jiffies(100)); |
| if (ret) |
| break; |
| } |
| |
| dev_dbg(vop_dev(vdev), |
| "%s %d retry: %d\n", __func__, __LINE__, retry); |
| vdev->dc->config_change = 0; |
| vdev->dc->guest_ack = 0; |
| exit: |
| for (i = 0; i < vdev->dd->num_vq; i++) |
| mutex_unlock(&vdev->vvr[i].vr_mutex); |
| mutex_unlock(&vi->vop_mutex); |
| return ret; |
| } |
| |
| static int vop_copy_dp_entry(struct vop_vdev *vdev, |
| struct mic_device_desc *argp, __u8 *type, |
| struct mic_device_desc **devpage) |
| { |
| struct vop_device *vpdev = vdev->vpdev; |
| struct mic_device_desc *devp; |
| struct mic_vqconfig *vqconfig; |
| int ret = 0, i; |
| bool slot_found = false; |
| |
| vqconfig = mic_vq_config(argp); |
| for (i = 0; i < argp->num_vq; i++) { |
| if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) { |
| ret = -EINVAL; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| goto exit; |
| } |
| } |
| |
| /* Find the first free device page entry */ |
| for (i = sizeof(struct mic_bootparam); |
| i < MIC_DP_SIZE - mic_total_desc_size(argp); |
| i += mic_total_desc_size(devp)) { |
| devp = vpdev->hw_ops->get_dp(vpdev) + i; |
| if (devp->type == 0 || devp->type == -1) { |
| slot_found = true; |
| break; |
| } |
| } |
| if (!slot_found) { |
| ret = -EINVAL; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| goto exit; |
| } |
| /* |
| * Save off the type before doing the memcpy. Type will be set in the |
| * end after completing all initialization for the new device. |
| */ |
| *type = argp->type; |
| argp->type = 0; |
| memcpy(devp, argp, mic_desc_size(argp)); |
| |
| *devpage = devp; |
| exit: |
| return ret; |
| } |
| |
| static void vop_init_device_ctrl(struct vop_vdev *vdev, |
| struct mic_device_desc *devpage) |
| { |
| struct mic_device_ctrl *dc; |
| |
| dc = (void *)devpage + mic_aligned_desc_size(devpage); |
| |
| dc->config_change = 0; |
| dc->guest_ack = 0; |
| dc->vdev_reset = 0; |
| dc->host_ack = 0; |
| dc->used_address_updated = 0; |
| dc->c2h_vdev_db = -1; |
| dc->h2c_vdev_db = -1; |
| vdev->dc = dc; |
| } |
| |
| static int vop_virtio_add_device(struct vop_vdev *vdev, |
| struct mic_device_desc *argp) |
| { |
| struct vop_info *vi = vdev->vi; |
| struct vop_device *vpdev = vi->vpdev; |
| struct mic_device_desc *dd = NULL; |
| struct mic_vqconfig *vqconfig; |
| int vr_size, i, j, ret; |
| u8 type = 0; |
| s8 db = -1; |
| char irqname[16]; |
| struct mic_bootparam *bootparam; |
| u16 num; |
| dma_addr_t vr_addr; |
| |
| bootparam = vpdev->hw_ops->get_dp(vpdev); |
| init_waitqueue_head(&vdev->waitq); |
| INIT_LIST_HEAD(&vdev->list); |
| vdev->vpdev = vpdev; |
| |
| ret = vop_copy_dp_entry(vdev, argp, &type, &dd); |
| if (ret) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| vop_init_device_ctrl(vdev, dd); |
| |
| vdev->dd = dd; |
| vdev->virtio_id = type; |
| vqconfig = mic_vq_config(dd); |
| INIT_WORK(&vdev->virtio_bh_work, vop_bh_handler); |
| |
| for (i = 0; i < dd->num_vq; i++) { |
| struct vop_vringh *vvr = &vdev->vvr[i]; |
| struct mic_vring *vr = &vdev->vvr[i].vring; |
| |
| num = le16_to_cpu(vqconfig[i].num); |
| mutex_init(&vvr->vr_mutex); |
| vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) + |
| sizeof(struct _mic_vring_info)); |
| vr->va = (void *) |
| __get_free_pages(GFP_KERNEL | __GFP_ZERO, |
| get_order(vr_size)); |
| if (!vr->va) { |
| ret = -ENOMEM; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| goto err; |
| } |
| vr->len = vr_size; |
| vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); |
| vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i); |
| vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size, |
| DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(&vpdev->dev, vr_addr)) { |
| free_pages((unsigned long)vr->va, get_order(vr_size)); |
| ret = -ENOMEM; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| goto err; |
| } |
| vqconfig[i].address = cpu_to_le64(vr_addr); |
| |
| vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); |
| ret = vringh_init_kern(&vvr->vrh, |
| *(u32 *)mic_vq_features(vdev->dd), |
| num, false, vr->vr.desc, vr->vr.avail, |
| vr->vr.used); |
| if (ret) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| goto err; |
| } |
| vringh_kiov_init(&vvr->riov, NULL, 0); |
| vringh_kiov_init(&vvr->wiov, NULL, 0); |
| vvr->head = USHRT_MAX; |
| vvr->vdev = vdev; |
| vvr->vrh.notify = _vop_notify; |
| dev_dbg(&vpdev->dev, |
| "%s %d index %d va %p info %p vr_size 0x%x\n", |
| __func__, __LINE__, i, vr->va, vr->info, vr_size); |
| vvr->buf = (void *)__get_free_pages(GFP_KERNEL, |
| get_order(VOP_INT_DMA_BUF_SIZE)); |
| vvr->buf_da = dma_map_single(&vpdev->dev, |
| vvr->buf, VOP_INT_DMA_BUF_SIZE, |
| DMA_BIDIRECTIONAL); |
| } |
| |
| snprintf(irqname, sizeof(irqname), "vop%dvirtio%d", vpdev->index, |
| vdev->virtio_id); |
| vdev->virtio_db = vpdev->hw_ops->next_db(vpdev); |
| vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, |
| _vop_virtio_intr_handler, irqname, vdev, |
| vdev->virtio_db); |
| if (IS_ERR(vdev->virtio_cookie)) { |
| ret = PTR_ERR(vdev->virtio_cookie); |
| dev_dbg(&vpdev->dev, "request irq failed\n"); |
| goto err; |
| } |
| |
| vdev->dc->c2h_vdev_db = vdev->virtio_db; |
| |
| /* |
| * Order the type update with previous stores. This write barrier |
| * is paired with the corresponding read barrier before the uncached |
| * system memory read of the type, on the card while scanning the |
| * device page. |
| */ |
| smp_wmb(); |
| dd->type = type; |
| argp->type = type; |
| |
| if (bootparam) { |
| db = bootparam->h2c_config_db; |
| if (db != -1) |
| vpdev->hw_ops->send_intr(vpdev, db); |
| } |
| dev_dbg(&vpdev->dev, "Added virtio id %d db %d\n", dd->type, db); |
| return 0; |
| err: |
| vqconfig = mic_vq_config(dd); |
| for (j = 0; j < i; j++) { |
| struct vop_vringh *vvr = &vdev->vvr[j]; |
| |
| dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[j].address), |
| vvr->vring.len, DMA_BIDIRECTIONAL); |
| free_pages((unsigned long)vvr->vring.va, |
| get_order(vvr->vring.len)); |
| } |
| return ret; |
| } |
| |
| static void vop_dev_remove(struct vop_info *pvi, struct mic_device_ctrl *devp, |
| struct vop_device *vpdev) |
| { |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); |
| s8 db; |
| int ret, retry; |
| DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); |
| |
| devp->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; |
| db = bootparam->h2c_config_db; |
| if (db != -1) |
| vpdev->hw_ops->send_intr(vpdev, db); |
| else |
| goto done; |
| for (retry = 15; retry--;) { |
| ret = wait_event_timeout(wake, devp->guest_ack, |
| msecs_to_jiffies(1000)); |
| if (ret) |
| break; |
| } |
| done: |
| devp->config_change = 0; |
| devp->guest_ack = 0; |
| } |
| |
| static void vop_virtio_del_device(struct vop_vdev *vdev) |
| { |
| struct vop_info *vi = vdev->vi; |
| struct vop_device *vpdev = vdev->vpdev; |
| int i; |
| struct mic_vqconfig *vqconfig; |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); |
| |
| if (!bootparam) |
| goto skip_hot_remove; |
| vop_dev_remove(vi, vdev->dc, vpdev); |
| skip_hot_remove: |
| vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); |
| flush_work(&vdev->virtio_bh_work); |
| vqconfig = mic_vq_config(vdev->dd); |
| for (i = 0; i < vdev->dd->num_vq; i++) { |
| struct vop_vringh *vvr = &vdev->vvr[i]; |
| |
| dma_unmap_single(&vpdev->dev, |
| vvr->buf_da, VOP_INT_DMA_BUF_SIZE, |
| DMA_BIDIRECTIONAL); |
| free_pages((unsigned long)vvr->buf, |
| get_order(VOP_INT_DMA_BUF_SIZE)); |
| vringh_kiov_cleanup(&vvr->riov); |
| vringh_kiov_cleanup(&vvr->wiov); |
| dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[i].address), |
| vvr->vring.len, DMA_BIDIRECTIONAL); |
| free_pages((unsigned long)vvr->vring.va, |
| get_order(vvr->vring.len)); |
| } |
| /* |
| * Order the type update with previous stores. This write barrier |
| * is paired with the corresponding read barrier before the uncached |
| * system memory read of the type, on the card while scanning the |
| * device page. |
| */ |
| smp_wmb(); |
| vdev->dd->type = -1; |
| } |
| |
| /* |
| * vop_sync_dma - Wrapper for synchronous DMAs. |
| * |
| * @dev - The address of the pointer to the device instance used |
| * for DMA registration. |
| * @dst - destination DMA address. |
| * @src - source DMA address. |
| * @len - size of the transfer. |
| * |
| * Return DMA_SUCCESS on success |
| */ |
| static int vop_sync_dma(struct vop_vdev *vdev, dma_addr_t dst, dma_addr_t src, |
| size_t len) |
| { |
| int err = 0; |
| struct dma_device *ddev; |
| struct dma_async_tx_descriptor *tx; |
| struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); |
| struct dma_chan *vop_ch = vi->dma_ch; |
| |
| if (!vop_ch) { |
| err = -EBUSY; |
| goto error; |
| } |
| ddev = vop_ch->device; |
| tx = ddev->device_prep_dma_memcpy(vop_ch, dst, src, len, |
| DMA_PREP_FENCE); |
| if (!tx) { |
| err = -ENOMEM; |
| goto error; |
| } else { |
| dma_cookie_t cookie; |
| |
| cookie = tx->tx_submit(tx); |
| if (dma_submit_error(cookie)) { |
| err = -ENOMEM; |
| goto error; |
| } |
| dma_async_issue_pending(vop_ch); |
| err = dma_sync_wait(vop_ch, cookie); |
| } |
| error: |
| if (err) |
| dev_err(&vi->vpdev->dev, "%s %d err %d\n", |
| __func__, __LINE__, err); |
| return err; |
| } |
| |
| #define VOP_USE_DMA true |
| |
| /* |
| * Initiates the copies across the PCIe bus from card memory to a user |
| * space buffer. When transfers are done using DMA, source/destination |
| * addresses and transfer length must follow the alignment requirements of |
| * the MIC DMA engine. |
| */ |
| static int vop_virtio_copy_to_user(struct vop_vdev *vdev, void __user *ubuf, |
| size_t len, u64 daddr, size_t dlen, |
| int vr_idx) |
| { |
| struct vop_device *vpdev = vdev->vpdev; |
| void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); |
| struct vop_vringh *vvr = &vdev->vvr[vr_idx]; |
| struct vop_info *vi = dev_get_drvdata(&vpdev->dev); |
| size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; |
| bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); |
| size_t dma_offset, partlen; |
| int err; |
| |
| if (!VOP_USE_DMA) { |
| if (copy_to_user(ubuf, (void __force *)dbuf, len)) { |
| err = -EFAULT; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| vdev->in_bytes += len; |
| err = 0; |
| goto err; |
| } |
| |
| dma_offset = daddr - round_down(daddr, dma_alignment); |
| daddr -= dma_offset; |
| len += dma_offset; |
| /* |
| * X100 uses DMA addresses as seen by the card so adding |
| * the aperture base is not required for DMA. However x200 |
| * requires DMA addresses to be an offset into the bar so |
| * add the aperture base for x200. |
| */ |
| if (x200) |
| daddr += vpdev->aper->pa; |
| while (len) { |
| partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); |
| err = vop_sync_dma(vdev, vvr->buf_da, daddr, |
| ALIGN(partlen, dma_alignment)); |
| if (err) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| if (copy_to_user(ubuf, vvr->buf + dma_offset, |
| partlen - dma_offset)) { |
| err = -EFAULT; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| daddr += partlen; |
| ubuf += partlen; |
| dbuf += partlen; |
| vdev->in_bytes_dma += partlen; |
| vdev->in_bytes += partlen; |
| len -= partlen; |
| dma_offset = 0; |
| } |
| err = 0; |
| err: |
| vpdev->hw_ops->iounmap(vpdev, dbuf); |
| dev_dbg(vop_dev(vdev), |
| "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", |
| __func__, ubuf, dbuf, len, vr_idx); |
| return err; |
| } |
| |
| /* |
| * Initiates copies across the PCIe bus from a user space buffer to card |
| * memory. When transfers are done using DMA, source/destination addresses |
| * and transfer length must follow the alignment requirements of the MIC |
| * DMA engine. |
| */ |
| static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf, |
| size_t len, u64 daddr, size_t dlen, |
| int vr_idx) |
| { |
| struct vop_device *vpdev = vdev->vpdev; |
| void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); |
| struct vop_vringh *vvr = &vdev->vvr[vr_idx]; |
| struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); |
| size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; |
| bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); |
| size_t partlen; |
| bool dma = VOP_USE_DMA; |
| int err = 0; |
| |
| if (daddr & (dma_alignment - 1)) { |
| vdev->tx_dst_unaligned += len; |
| dma = false; |
| } else if (ALIGN(len, dma_alignment) > dlen) { |
| vdev->tx_len_unaligned += len; |
| dma = false; |
| } |
| |
| if (!dma) |
| goto memcpy; |
| |
| /* |
| * X100 uses DMA addresses as seen by the card so adding |
| * the aperture base is not required for DMA. However x200 |
| * requires DMA addresses to be an offset into the bar so |
| * add the aperture base for x200. |
| */ |
| if (x200) |
| daddr += vpdev->aper->pa; |
| while (len) { |
| partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); |
| |
| if (copy_from_user(vvr->buf, ubuf, partlen)) { |
| err = -EFAULT; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| err = vop_sync_dma(vdev, daddr, vvr->buf_da, |
| ALIGN(partlen, dma_alignment)); |
| if (err) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| daddr += partlen; |
| ubuf += partlen; |
| dbuf += partlen; |
| vdev->out_bytes_dma += partlen; |
| vdev->out_bytes += partlen; |
| len -= partlen; |
| } |
| memcpy: |
| /* |
| * We are copying to IO below and should ideally use something |
| * like copy_from_user_toio(..) if it existed. |
| */ |
| if (copy_from_user((void __force *)dbuf, ubuf, len)) { |
| err = -EFAULT; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| vdev->out_bytes += len; |
| err = 0; |
| err: |
| vpdev->hw_ops->iounmap(vpdev, dbuf); |
| dev_dbg(vop_dev(vdev), |
| "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", |
| __func__, ubuf, dbuf, len, vr_idx); |
| return err; |
| } |
| |
| #define MIC_VRINGH_READ true |
| |
| /* Determine the total number of bytes consumed in a VRINGH KIOV */ |
| static inline u32 vop_vringh_iov_consumed(struct vringh_kiov *iov) |
| { |
| int i; |
| u32 total = iov->consumed; |
| |
| for (i = 0; i < iov->i; i++) |
| total += iov->iov[i].iov_len; |
| return total; |
| } |
| |
| /* |
| * Traverse the VRINGH KIOV and issue the APIs to trigger the copies. |
| * This API is heavily based on the vringh_iov_xfer(..) implementation |
| * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..) |
| * and vringh_iov_push_kern(..) directly is because there is no |
| * way to override the VRINGH xfer(..) routines as of v3.10. |
| */ |
| static int vop_vringh_copy(struct vop_vdev *vdev, struct vringh_kiov *iov, |
| void __user *ubuf, size_t len, bool read, int vr_idx, |
| size_t *out_len) |
| { |
| int ret = 0; |
| size_t partlen, tot_len = 0; |
| |
| while (len && iov->i < iov->used) { |
| struct kvec *kiov = &iov->iov[iov->i]; |
| |
| partlen = min(kiov->iov_len, len); |
| if (read) |
| ret = vop_virtio_copy_to_user(vdev, ubuf, partlen, |
| (u64)kiov->iov_base, |
| kiov->iov_len, |
| vr_idx); |
| else |
| ret = vop_virtio_copy_from_user(vdev, ubuf, partlen, |
| (u64)kiov->iov_base, |
| kiov->iov_len, |
| vr_idx); |
| if (ret) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| break; |
| } |
| len -= partlen; |
| ubuf += partlen; |
| tot_len += partlen; |
| iov->consumed += partlen; |
| kiov->iov_len -= partlen; |
| kiov->iov_base += partlen; |
| if (!kiov->iov_len) { |
| /* Fix up old iov element then increment. */ |
| kiov->iov_len = iov->consumed; |
| kiov->iov_base -= iov->consumed; |
| |
| iov->consumed = 0; |
| iov->i++; |
| } |
| } |
| *out_len = tot_len; |
| return ret; |
| } |
| |
| /* |
| * Use the standard VRINGH infrastructure in the kernel to fetch new |
| * descriptors, initiate the copies and update the used ring. |
| */ |
| static int _vop_virtio_copy(struct vop_vdev *vdev, struct mic_copy_desc *copy) |
| { |
| int ret = 0; |
| u32 iovcnt = copy->iovcnt; |
| struct iovec iov; |
| struct iovec __user *u_iov = copy->iov; |
| void __user *ubuf = NULL; |
| struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx]; |
| struct vringh_kiov *riov = &vvr->riov; |
| struct vringh_kiov *wiov = &vvr->wiov; |
| struct vringh *vrh = &vvr->vrh; |
| u16 *head = &vvr->head; |
| struct mic_vring *vr = &vvr->vring; |
| size_t len = 0, out_len; |
| |
| copy->out_len = 0; |
| /* Fetch a new IOVEC if all previous elements have been processed */ |
| if (riov->i == riov->used && wiov->i == wiov->used) { |
| ret = vringh_getdesc_kern(vrh, riov, wiov, |
| head, GFP_KERNEL); |
| /* Check if there are available descriptors */ |
| if (ret <= 0) |
| return ret; |
| } |
| while (iovcnt) { |
| if (!len) { |
| /* Copy over a new iovec from user space. */ |
| ret = copy_from_user(&iov, u_iov, sizeof(*u_iov)); |
| if (ret) { |
| ret = -EINVAL; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| break; |
| } |
| len = iov.iov_len; |
| ubuf = iov.iov_base; |
| } |
| /* Issue all the read descriptors first */ |
| ret = vop_vringh_copy(vdev, riov, ubuf, len, |
| MIC_VRINGH_READ, copy->vr_idx, &out_len); |
| if (ret) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| break; |
| } |
| len -= out_len; |
| ubuf += out_len; |
| copy->out_len += out_len; |
| /* Issue the write descriptors next */ |
| ret = vop_vringh_copy(vdev, wiov, ubuf, len, |
| !MIC_VRINGH_READ, copy->vr_idx, &out_len); |
| if (ret) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, ret); |
| break; |
| } |
| len -= out_len; |
| ubuf += out_len; |
| copy->out_len += out_len; |
| if (!len) { |
| /* One user space iovec is now completed */ |
| iovcnt--; |
| u_iov++; |
| } |
| /* Exit loop if all elements in KIOVs have been processed. */ |
| if (riov->i == riov->used && wiov->i == wiov->used) |
| break; |
| } |
| /* |
| * Update the used ring if a descriptor was available and some data was |
| * copied in/out and the user asked for a used ring update. |
| */ |
| if (*head != USHRT_MAX && copy->out_len && copy->update_used) { |
| u32 total = 0; |
| |
| /* Determine the total data consumed */ |
| total += vop_vringh_iov_consumed(riov); |
| total += vop_vringh_iov_consumed(wiov); |
| vringh_complete_kern(vrh, *head, total); |
| *head = USHRT_MAX; |
| if (vringh_need_notify_kern(vrh) > 0) |
| vringh_notify(vrh); |
| vringh_kiov_cleanup(riov); |
| vringh_kiov_cleanup(wiov); |
| /* Update avail idx for user space */ |
| vr->info->avail_idx = vrh->last_avail_idx; |
| } |
| return ret; |
| } |
| |
| static inline int vop_verify_copy_args(struct vop_vdev *vdev, |
| struct mic_copy_desc *copy) |
| { |
| if (!vdev || copy->vr_idx >= vdev->dd->num_vq) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* Copy a specified number of virtio descriptors in a chain */ |
| static int vop_virtio_copy_desc(struct vop_vdev *vdev, |
| struct mic_copy_desc *copy) |
| { |
| int err; |
| struct vop_vringh *vvr; |
| |
| err = vop_verify_copy_args(vdev, copy); |
| if (err) |
| return err; |
| |
| vvr = &vdev->vvr[copy->vr_idx]; |
| mutex_lock(&vvr->vr_mutex); |
| if (!vop_vdevup(vdev)) { |
| err = -ENODEV; |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| goto err; |
| } |
| err = _vop_virtio_copy(vdev, copy); |
| if (err) { |
| dev_err(vop_dev(vdev), "%s %d err %d\n", |
| __func__, __LINE__, err); |
| } |
| err: |
| mutex_unlock(&vvr->vr_mutex); |
| return err; |
| } |
| |
| static int vop_open(struct inode *inode, struct file *f) |
| { |
| struct vop_vdev *vdev; |
| struct vop_info *vi = container_of(f->private_data, |
| struct vop_info, miscdev); |
| |
| vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); |
| if (!vdev) |
| return -ENOMEM; |
| vdev->vi = vi; |
| mutex_init(&vdev->vdev_mutex); |
| f->private_data = vdev; |
| init_completion(&vdev->destroy); |
| complete(&vdev->destroy); |
| return 0; |
| } |
| |
| static int vop_release(struct inode *inode, struct file *f) |
| { |
| struct vop_vdev *vdev = f->private_data, *vdev_tmp; |
| struct vop_info *vi = vdev->vi; |
| struct list_head *pos, *tmp; |
| bool found = false; |
| |
| mutex_lock(&vdev->vdev_mutex); |
| if (vdev->deleted) |
| goto unlock; |
| mutex_lock(&vi->vop_mutex); |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { |
| vdev_tmp = list_entry(pos, struct vop_vdev, list); |
| if (vdev == vdev_tmp) { |
| vop_virtio_del_device(vdev); |
| list_del(pos); |
| found = true; |
| break; |
| } |
| } |
| mutex_unlock(&vi->vop_mutex); |
| unlock: |
| mutex_unlock(&vdev->vdev_mutex); |
| if (!found) |
| wait_for_completion(&vdev->destroy); |
| f->private_data = NULL; |
| kfree(vdev); |
| return 0; |
| } |
| |
| static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) |
| { |
| struct vop_vdev *vdev = f->private_data; |
| struct vop_info *vi = vdev->vi; |
| void __user *argp = (void __user *)arg; |
| int ret; |
| |
| switch (cmd) { |
| case MIC_VIRTIO_ADD_DEVICE: |
| { |
| struct mic_device_desc dd, *dd_config; |
| |
| if (copy_from_user(&dd, argp, sizeof(dd))) |
| return -EFAULT; |
| |
| if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE || |
| dd.num_vq > MIC_MAX_VRINGS) |
| return -EINVAL; |
| |
| dd_config = memdup_user(argp, mic_desc_size(&dd)); |
| if (IS_ERR(dd_config)) |
| return PTR_ERR(dd_config); |
| |
| /* Ensure desc has not changed between the two reads */ |
| if (memcmp(&dd, dd_config, sizeof(dd))) { |
| ret = -EINVAL; |
| goto free_ret; |
| } |
| mutex_lock(&vdev->vdev_mutex); |
| mutex_lock(&vi->vop_mutex); |
| ret = vop_virtio_add_device(vdev, dd_config); |
| if (ret) |
| goto unlock_ret; |
| list_add_tail(&vdev->list, &vi->vdev_list); |
| unlock_ret: |
| mutex_unlock(&vi->vop_mutex); |
| mutex_unlock(&vdev->vdev_mutex); |
| free_ret: |
| kfree(dd_config); |
| return ret; |
| } |
| case MIC_VIRTIO_COPY_DESC: |
| { |
| struct mic_copy_desc copy; |
| |
| mutex_lock(&vdev->vdev_mutex); |
| ret = vop_vdev_inited(vdev); |
| if (ret) |
| goto _unlock_ret; |
| |
| if (copy_from_user(©, argp, sizeof(copy))) { |
| ret = -EFAULT; |
| goto _unlock_ret; |
| } |
| |
| ret = vop_virtio_copy_desc(vdev, ©); |
| if (ret < 0) |
| goto _unlock_ret; |
| if (copy_to_user( |
| &((struct mic_copy_desc __user *)argp)->out_len, |
| ©.out_len, sizeof(copy.out_len))) |
| ret = -EFAULT; |
| _unlock_ret: |
| mutex_unlock(&vdev->vdev_mutex); |
| return ret; |
| } |
| case MIC_VIRTIO_CONFIG_CHANGE: |
| { |
| void *buf; |
| |
| mutex_lock(&vdev->vdev_mutex); |
| ret = vop_vdev_inited(vdev); |
| if (ret) |
| goto __unlock_ret; |
| buf = memdup_user(argp, vdev->dd->config_len); |
| if (IS_ERR(buf)) { |
| ret = PTR_ERR(buf); |
| goto __unlock_ret; |
| } |
| ret = vop_virtio_config_change(vdev, buf); |
| kfree(buf); |
| __unlock_ret: |
| mutex_unlock(&vdev->vdev_mutex); |
| return ret; |
| } |
| default: |
| return -ENOIOCTLCMD; |
| }; |
| return 0; |
| } |
| |
| /* |
| * We return EPOLLIN | EPOLLOUT from poll when new buffers are enqueued, and |
| * not when previously enqueued buffers may be available. This means that |
| * in the card->host (TX) path, when userspace is unblocked by poll it |
| * must drain all available descriptors or it can stall. |
| */ |
| static __poll_t vop_poll(struct file *f, poll_table *wait) |
| { |
| struct vop_vdev *vdev = f->private_data; |
| __poll_t mask = 0; |
| |
| mutex_lock(&vdev->vdev_mutex); |
| if (vop_vdev_inited(vdev)) { |
| mask = EPOLLERR; |
| goto done; |
| } |
| poll_wait(f, &vdev->waitq, wait); |
| if (vop_vdev_inited(vdev)) { |
| mask = EPOLLERR; |
| } else if (vdev->poll_wake) { |
| vdev->poll_wake = 0; |
| mask = EPOLLIN | EPOLLOUT; |
| } |
| done: |
| mutex_unlock(&vdev->vdev_mutex); |
| return mask; |
| } |
| |
| static inline int |
| vop_query_offset(struct vop_vdev *vdev, unsigned long offset, |
| unsigned long *size, unsigned long *pa) |
| { |
| struct vop_device *vpdev = vdev->vpdev; |
| unsigned long start = MIC_DP_SIZE; |
| int i; |
| |
| /* |
| * MMAP interface is as follows: |
| * offset region |
| * 0x0 virtio device_page |
| * 0x1000 first vring |
| * 0x1000 + size of 1st vring second vring |
| * .... |
| */ |
| if (!offset) { |
| *pa = virt_to_phys(vpdev->hw_ops->get_dp(vpdev)); |
| *size = MIC_DP_SIZE; |
| return 0; |
| } |
| |
| for (i = 0; i < vdev->dd->num_vq; i++) { |
| struct vop_vringh *vvr = &vdev->vvr[i]; |
| |
| if (offset == start) { |
| *pa = virt_to_phys(vvr->vring.va); |
| *size = vvr->vring.len; |
| return 0; |
| } |
| start += vvr->vring.len; |
| } |
| return -1; |
| } |
| |
| /* |
| * Maps the device page and virtio rings to user space for readonly access. |
| */ |
| static int vop_mmap(struct file *f, struct vm_area_struct *vma) |
| { |
| struct vop_vdev *vdev = f->private_data; |
| unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; |
| unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size; |
| int i, err; |
| |
| err = vop_vdev_inited(vdev); |
| if (err) |
| goto ret; |
| if (vma->vm_flags & VM_WRITE) { |
| err = -EACCES; |
| goto ret; |
| } |
| while (size_rem) { |
| i = vop_query_offset(vdev, offset, &size, &pa); |
| if (i < 0) { |
| err = -EINVAL; |
| goto ret; |
| } |
| err = remap_pfn_range(vma, vma->vm_start + offset, |
| pa >> PAGE_SHIFT, size, |
| vma->vm_page_prot); |
| if (err) |
| goto ret; |
| size_rem -= size; |
| offset += size; |
| } |
| ret: |
| return err; |
| } |
| |
| static const struct file_operations vop_fops = { |
| .open = vop_open, |
| .release = vop_release, |
| .unlocked_ioctl = vop_ioctl, |
| .poll = vop_poll, |
| .mmap = vop_mmap, |
| .owner = THIS_MODULE, |
| }; |
| |
| int vop_host_init(struct vop_info *vi) |
| { |
| int rc; |
| struct miscdevice *mdev; |
| struct vop_device *vpdev = vi->vpdev; |
| |
| INIT_LIST_HEAD(&vi->vdev_list); |
| vi->dma_ch = vpdev->dma_ch; |
| mdev = &vi->miscdev; |
| mdev->minor = MISC_DYNAMIC_MINOR; |
| snprintf(vi->name, sizeof(vi->name), "vop_virtio%d", vpdev->index); |
| mdev->name = vi->name; |
| mdev->fops = &vop_fops; |
| mdev->parent = &vpdev->dev; |
| |
| rc = misc_register(mdev); |
| if (rc) |
| dev_err(&vpdev->dev, "%s failed rc %d\n", __func__, rc); |
| return rc; |
| } |
| |
| void vop_host_uninit(struct vop_info *vi) |
| { |
| struct list_head *pos, *tmp; |
| struct vop_vdev *vdev; |
| |
| mutex_lock(&vi->vop_mutex); |
| vop_virtio_reset_devices(vi); |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { |
| vdev = list_entry(pos, struct vop_vdev, list); |
| list_del(pos); |
| reinit_completion(&vdev->destroy); |
| mutex_unlock(&vi->vop_mutex); |
| mutex_lock(&vdev->vdev_mutex); |
| vop_virtio_del_device(vdev); |
| vdev->deleted = true; |
| mutex_unlock(&vdev->vdev_mutex); |
| complete(&vdev->destroy); |
| mutex_lock(&vi->vop_mutex); |
| } |
| mutex_unlock(&vi->vop_mutex); |
| misc_deregister(&vi->miscdev); |
| } |