| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Interface to the libusual. | |
| * | |
| * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com> | |
| * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) | |
| * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com) | |
| */ | |
| #ifndef __LINUX_USB_USUAL_H | |
| #define __LINUX_USB_USUAL_H | |
| /* We should do this for cleanliness... But other usb_foo.h do not do this. */ | |
| /* #include <linux/usb.h> */ | |
| /* | |
| * The flags field, which we store in usb_device_id.driver_info. | |
| * It is compatible with the old usb-storage flags in lower 24 bits. | |
| */ | |
| /* | |
| * Static flag definitions. We use this roundabout technique so that the | |
| * proc_info() routine can automatically display a message for each flag. | |
| */ | |
| #define US_DO_ALL_FLAGS \ | |
| US_FLAG(SINGLE_LUN, 0x00000001) \ | |
| /* allow access to only LUN 0 */ \ | |
| US_FLAG(NEED_OVERRIDE, 0x00000002) \ | |
| /* unusual_devs entry is necessary */ \ | |
| US_FLAG(SCM_MULT_TARG, 0x00000004) \ | |
| /* supports multiple targets */ \ | |
| US_FLAG(FIX_INQUIRY, 0x00000008) \ | |
| /* INQUIRY response needs faking */ \ | |
| US_FLAG(FIX_CAPACITY, 0x00000010) \ | |
| /* READ CAPACITY response too big */ \ | |
| US_FLAG(IGNORE_RESIDUE, 0x00000020) \ | |
| /* reported residue is wrong */ \ | |
| US_FLAG(BULK32, 0x00000040) \ | |
| /* Uses 32-byte CBW length */ \ | |
| US_FLAG(NOT_LOCKABLE, 0x00000080) \ | |
| /* PREVENT/ALLOW not supported */ \ | |
| US_FLAG(GO_SLOW, 0x00000100) \ | |
| /* Need delay after Command phase */ \ | |
| US_FLAG(NO_WP_DETECT, 0x00000200) \ | |
| /* Don't check for write-protect */ \ | |
| US_FLAG(MAX_SECTORS_64, 0x00000400) \ | |
| /* Sets max_sectors to 64 */ \ | |
| US_FLAG(IGNORE_DEVICE, 0x00000800) \ | |
| /* Don't claim device */ \ | |
| US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \ | |
| /* sometimes sizes is too big */ \ | |
| US_FLAG(MAX_SECTORS_MIN,0x00002000) \ | |
| /* Sets max_sectors to arch min */ \ | |
| US_FLAG(BULK_IGNORE_TAG,0x00004000) \ | |
| /* Ignore tag mismatch in bulk operations */ \ | |
| US_FLAG(SANE_SENSE, 0x00008000) \ | |
| /* Sane Sense (> 18 bytes) */ \ | |
| US_FLAG(CAPACITY_OK, 0x00010000) \ | |
| /* READ CAPACITY response is correct */ \ | |
| US_FLAG(BAD_SENSE, 0x00020000) \ | |
| /* Bad Sense (never more than 18 bytes) */ \ | |
| US_FLAG(NO_READ_DISC_INFO, 0x00040000) \ | |
| /* cannot handle READ_DISC_INFO */ \ | |
| US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ | |
| /* cannot handle READ_CAPACITY_16 */ \ | |
| US_FLAG(INITIAL_READ10, 0x00100000) \ | |
| /* Initial READ(10) (and others) must be retried */ \ | |
| US_FLAG(WRITE_CACHE, 0x00200000) \ | |
| /* Write Cache status is not available */ \ | |
| US_FLAG(NEEDS_CAP16, 0x00400000) \ | |
| /* cannot handle READ_CAPACITY_10 */ \ | |
| US_FLAG(IGNORE_UAS, 0x00800000) \ | |
| /* Device advertises UAS but it is broken */ \ | |
| US_FLAG(BROKEN_FUA, 0x01000000) \ | |
| /* Cannot handle FUA in WRITE or READ CDBs */ \ | |
| US_FLAG(NO_ATA_1X, 0x02000000) \ | |
| /* Cannot handle ATA_12 or ATA_16 CDBs */ \ | |
| US_FLAG(NO_REPORT_OPCODES, 0x04000000) \ | |
| /* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \ | |
| US_FLAG(MAX_SECTORS_240, 0x08000000) \ | |
| /* Sets max_sectors to 240 */ \ | |
| US_FLAG(NO_REPORT_LUNS, 0x10000000) \ | |
| /* Cannot handle REPORT_LUNS */ \ | |
| US_FLAG(ALWAYS_SYNC, 0x20000000) \ | |
| /* lies about caching, so always sync */ \ | |
| #define US_FLAG(name, value) US_FL_##name = value , | |
| enum { US_DO_ALL_FLAGS }; | |
| #undef US_FLAG | |
| #include <linux/usb/storage.h> | |
| extern int usb_usual_ignore_device(struct usb_interface *intf); | |
| extern struct usb_device_id usb_storage_usb_ids[]; | |
| #endif /* __LINUX_USB_USUAL_H */ |