| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/types.h> | |
| #include <linux/kconfig.h> | |
| #include <linux/list.h> | |
| #include <linux/slab.h> | |
| #include <linux/security.h> | |
| #include <linux/highmem.h> | |
| #include <linux/umh.h> | |
| #include <linux/sysctl.h> | |
| #include <linux/vmalloc.h> | |
| #include "fallback.h" | |
| #include "firmware.h" | |
| /* | |
| * firmware fallback mechanism | |
| */ | |
| extern struct firmware_fallback_config fw_fallback_config; | |
| /* These getters are vetted to use int properly */ | |
| static inline int __firmware_loading_timeout(void) | |
| { | |
| return fw_fallback_config.loading_timeout; | |
| } | |
| /* These setters are vetted to use int properly */ | |
| static void __fw_fallback_set_timeout(int timeout) | |
| { | |
| fw_fallback_config.loading_timeout = timeout; | |
| } | |
| /* | |
| * use small loading timeout for caching devices' firmware because all these | |
| * firmware images have been loaded successfully at lease once, also system is | |
| * ready for completing firmware loading now. The maximum size of firmware in | |
| * current distributions is about 2M bytes, so 10 secs should be enough. | |
| */ | |
| void fw_fallback_set_cache_timeout(void) | |
| { | |
| fw_fallback_config.old_timeout = __firmware_loading_timeout(); | |
| __fw_fallback_set_timeout(10); | |
| } | |
| /* Restores the timeout to the value last configured during normal operation */ | |
| void fw_fallback_set_default_timeout(void) | |
| { | |
| __fw_fallback_set_timeout(fw_fallback_config.old_timeout); | |
| } | |
| static long firmware_loading_timeout(void) | |
| { | |
| return __firmware_loading_timeout() > 0 ? | |
| __firmware_loading_timeout() * HZ : MAX_JIFFY_OFFSET; | |
| } | |
| static inline bool fw_sysfs_done(struct fw_priv *fw_priv) | |
| { | |
| return __fw_state_check(fw_priv, FW_STATUS_DONE); | |
| } | |
| static inline bool fw_sysfs_loading(struct fw_priv *fw_priv) | |
| { | |
| return __fw_state_check(fw_priv, FW_STATUS_LOADING); | |
| } | |
| static inline int fw_sysfs_wait_timeout(struct fw_priv *fw_priv, long timeout) | |
| { | |
| return __fw_state_wait_common(fw_priv, timeout); | |
| } | |
| struct fw_sysfs { | |
| bool nowait; | |
| struct device dev; | |
| struct fw_priv *fw_priv; | |
| struct firmware *fw; | |
| }; | |
| static struct fw_sysfs *to_fw_sysfs(struct device *dev) | |
| { | |
| return container_of(dev, struct fw_sysfs, dev); | |
| } | |
| static void __fw_load_abort(struct fw_priv *fw_priv) | |
| { | |
| /* | |
| * There is a small window in which user can write to 'loading' | |
| * between loading done and disappearance of 'loading' | |
| */ | |
| if (fw_sysfs_done(fw_priv)) | |
| return; | |
| list_del_init(&fw_priv->pending_list); | |
| fw_state_aborted(fw_priv); | |
| } | |
| static void fw_load_abort(struct fw_sysfs *fw_sysfs) | |
| { | |
| struct fw_priv *fw_priv = fw_sysfs->fw_priv; | |
| __fw_load_abort(fw_priv); | |
| } | |
| static LIST_HEAD(pending_fw_head); | |
| void kill_pending_fw_fallback_reqs(bool only_kill_custom) | |
| { | |
| struct fw_priv *fw_priv; | |
| struct fw_priv *next; | |
| mutex_lock(&fw_lock); | |
| list_for_each_entry_safe(fw_priv, next, &pending_fw_head, | |
| pending_list) { | |
| if (!fw_priv->need_uevent || !only_kill_custom) | |
| __fw_load_abort(fw_priv); | |
| } | |
| mutex_unlock(&fw_lock); | |
| } | |
| static ssize_t timeout_show(struct class *class, struct class_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", __firmware_loading_timeout()); | |
| } | |
| /** | |
| * firmware_timeout_store() - set number of seconds to wait for firmware | |
| * @class: device class pointer | |
| * @attr: device attribute pointer | |
| * @buf: buffer to scan for timeout value | |
| * @count: number of bytes in @buf | |
| * | |
| * Sets the number of seconds to wait for the firmware. Once | |
| * this expires an error will be returned to the driver and no | |
| * firmware will be provided. | |
| * | |
| * Note: zero means 'wait forever'. | |
| **/ | |
| static ssize_t timeout_store(struct class *class, struct class_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int tmp_loading_timeout = simple_strtol(buf, NULL, 10); | |
| if (tmp_loading_timeout < 0) | |
| tmp_loading_timeout = 0; | |
| __fw_fallback_set_timeout(tmp_loading_timeout); | |
| return count; | |
| } | |
| static CLASS_ATTR_RW(timeout); | |
| static struct attribute *firmware_class_attrs[] = { | |
| &class_attr_timeout.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(firmware_class); | |
| static void fw_dev_release(struct device *dev) | |
| { | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| kfree(fw_sysfs); | |
| } | |
| static int do_firmware_uevent(struct fw_sysfs *fw_sysfs, struct kobj_uevent_env *env) | |
| { | |
| if (add_uevent_var(env, "FIRMWARE=%s", fw_sysfs->fw_priv->fw_name)) | |
| return -ENOMEM; | |
| if (add_uevent_var(env, "TIMEOUT=%i", __firmware_loading_timeout())) | |
| return -ENOMEM; | |
| if (add_uevent_var(env, "ASYNC=%d", fw_sysfs->nowait)) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| int err = 0; | |
| mutex_lock(&fw_lock); | |
| if (fw_sysfs->fw_priv) | |
| err = do_firmware_uevent(fw_sysfs, env); | |
| mutex_unlock(&fw_lock); | |
| return err; | |
| } | |
| static struct class firmware_class = { | |
| .name = "firmware", | |
| .class_groups = firmware_class_groups, | |
| .dev_uevent = firmware_uevent, | |
| .dev_release = fw_dev_release, | |
| }; | |
| int register_sysfs_loader(void) | |
| { | |
| return class_register(&firmware_class); | |
| } | |
| void unregister_sysfs_loader(void) | |
| { | |
| class_unregister(&firmware_class); | |
| } | |
| static ssize_t firmware_loading_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| int loading = 0; | |
| mutex_lock(&fw_lock); | |
| if (fw_sysfs->fw_priv) | |
| loading = fw_sysfs_loading(fw_sysfs->fw_priv); | |
| mutex_unlock(&fw_lock); | |
| return sprintf(buf, "%d\n", loading); | |
| } | |
| /* one pages buffer should be mapped/unmapped only once */ | |
| static int map_fw_priv_pages(struct fw_priv *fw_priv) | |
| { | |
| if (!fw_priv->is_paged_buf) | |
| return 0; | |
| vunmap(fw_priv->data); | |
| fw_priv->data = vmap(fw_priv->pages, fw_priv->nr_pages, 0, | |
| PAGE_KERNEL_RO); | |
| if (!fw_priv->data) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| /** | |
| * firmware_loading_store() - set value in the 'loading' control file | |
| * @dev: device pointer | |
| * @attr: device attribute pointer | |
| * @buf: buffer to scan for loading control value | |
| * @count: number of bytes in @buf | |
| * | |
| * The relevant values are: | |
| * | |
| * 1: Start a load, discarding any previous partial load. | |
| * 0: Conclude the load and hand the data to the driver code. | |
| * -1: Conclude the load with an error and discard any written data. | |
| **/ | |
| static ssize_t firmware_loading_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| struct fw_priv *fw_priv; | |
| ssize_t written = count; | |
| int loading = simple_strtol(buf, NULL, 10); | |
| int i; | |
| mutex_lock(&fw_lock); | |
| fw_priv = fw_sysfs->fw_priv; | |
| if (fw_state_is_aborted(fw_priv)) | |
| goto out; | |
| switch (loading) { | |
| case 1: | |
| /* discarding any previous partial load */ | |
| if (!fw_sysfs_done(fw_priv)) { | |
| for (i = 0; i < fw_priv->nr_pages; i++) | |
| __free_page(fw_priv->pages[i]); | |
| vfree(fw_priv->pages); | |
| fw_priv->pages = NULL; | |
| fw_priv->page_array_size = 0; | |
| fw_priv->nr_pages = 0; | |
| fw_state_start(fw_priv); | |
| } | |
| break; | |
| case 0: | |
| if (fw_sysfs_loading(fw_priv)) { | |
| int rc; | |
| /* | |
| * Several loading requests may be pending on | |
| * one same firmware buf, so let all requests | |
| * see the mapped 'buf->data' once the loading | |
| * is completed. | |
| * */ | |
| rc = map_fw_priv_pages(fw_priv); | |
| if (rc) | |
| dev_err(dev, "%s: map pages failed\n", | |
| __func__); | |
| else | |
| rc = security_kernel_post_read_file(NULL, | |
| fw_priv->data, fw_priv->size, | |
| READING_FIRMWARE); | |
| /* | |
| * Same logic as fw_load_abort, only the DONE bit | |
| * is ignored and we set ABORT only on failure. | |
| */ | |
| list_del_init(&fw_priv->pending_list); | |
| if (rc) { | |
| fw_state_aborted(fw_priv); | |
| written = rc; | |
| } else { | |
| fw_state_done(fw_priv); | |
| } | |
| break; | |
| } | |
| /* fallthrough */ | |
| default: | |
| dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading); | |
| /* fallthrough */ | |
| case -1: | |
| fw_load_abort(fw_sysfs); | |
| break; | |
| } | |
| out: | |
| mutex_unlock(&fw_lock); | |
| return written; | |
| } | |
| static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); | |
| static void firmware_rw_data(struct fw_priv *fw_priv, char *buffer, | |
| loff_t offset, size_t count, bool read) | |
| { | |
| if (read) | |
| memcpy(buffer, fw_priv->data + offset, count); | |
| else | |
| memcpy(fw_priv->data + offset, buffer, count); | |
| } | |
| static void firmware_rw(struct fw_priv *fw_priv, char *buffer, | |
| loff_t offset, size_t count, bool read) | |
| { | |
| while (count) { | |
| void *page_data; | |
| int page_nr = offset >> PAGE_SHIFT; | |
| int page_ofs = offset & (PAGE_SIZE-1); | |
| int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); | |
| page_data = kmap(fw_priv->pages[page_nr]); | |
| if (read) | |
| memcpy(buffer, page_data + page_ofs, page_cnt); | |
| else | |
| memcpy(page_data + page_ofs, buffer, page_cnt); | |
| kunmap(fw_priv->pages[page_nr]); | |
| buffer += page_cnt; | |
| offset += page_cnt; | |
| count -= page_cnt; | |
| } | |
| } | |
| static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buffer, loff_t offset, size_t count) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| struct fw_priv *fw_priv; | |
| ssize_t ret_count; | |
| mutex_lock(&fw_lock); | |
| fw_priv = fw_sysfs->fw_priv; | |
| if (!fw_priv || fw_sysfs_done(fw_priv)) { | |
| ret_count = -ENODEV; | |
| goto out; | |
| } | |
| if (offset > fw_priv->size) { | |
| ret_count = 0; | |
| goto out; | |
| } | |
| if (count > fw_priv->size - offset) | |
| count = fw_priv->size - offset; | |
| ret_count = count; | |
| if (fw_priv->data) | |
| firmware_rw_data(fw_priv, buffer, offset, count, true); | |
| else | |
| firmware_rw(fw_priv, buffer, offset, count, true); | |
| out: | |
| mutex_unlock(&fw_lock); | |
| return ret_count; | |
| } | |
| static int fw_realloc_pages(struct fw_sysfs *fw_sysfs, int min_size) | |
| { | |
| struct fw_priv *fw_priv= fw_sysfs->fw_priv; | |
| int pages_needed = PAGE_ALIGN(min_size) >> PAGE_SHIFT; | |
| /* If the array of pages is too small, grow it... */ | |
| if (fw_priv->page_array_size < pages_needed) { | |
| int new_array_size = max(pages_needed, | |
| fw_priv->page_array_size * 2); | |
| struct page **new_pages; | |
| new_pages = vmalloc(array_size(new_array_size, sizeof(void *))); | |
| if (!new_pages) { | |
| fw_load_abort(fw_sysfs); | |
| return -ENOMEM; | |
| } | |
| memcpy(new_pages, fw_priv->pages, | |
| fw_priv->page_array_size * sizeof(void *)); | |
| memset(&new_pages[fw_priv->page_array_size], 0, sizeof(void *) * | |
| (new_array_size - fw_priv->page_array_size)); | |
| vfree(fw_priv->pages); | |
| fw_priv->pages = new_pages; | |
| fw_priv->page_array_size = new_array_size; | |
| } | |
| while (fw_priv->nr_pages < pages_needed) { | |
| fw_priv->pages[fw_priv->nr_pages] = | |
| alloc_page(GFP_KERNEL | __GFP_HIGHMEM); | |
| if (!fw_priv->pages[fw_priv->nr_pages]) { | |
| fw_load_abort(fw_sysfs); | |
| return -ENOMEM; | |
| } | |
| fw_priv->nr_pages++; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * firmware_data_write() - write method for firmware | |
| * @filp: open sysfs file | |
| * @kobj: kobject for the device | |
| * @bin_attr: bin_attr structure | |
| * @buffer: buffer being written | |
| * @offset: buffer offset for write in total data store area | |
| * @count: buffer size | |
| * | |
| * Data written to the 'data' attribute will be later handed to | |
| * the driver as a firmware image. | |
| **/ | |
| static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buffer, loff_t offset, size_t count) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); | |
| struct fw_priv *fw_priv; | |
| ssize_t retval; | |
| if (!capable(CAP_SYS_RAWIO)) | |
| return -EPERM; | |
| mutex_lock(&fw_lock); | |
| fw_priv = fw_sysfs->fw_priv; | |
| if (!fw_priv || fw_sysfs_done(fw_priv)) { | |
| retval = -ENODEV; | |
| goto out; | |
| } | |
| if (fw_priv->data) { | |
| if (offset + count > fw_priv->allocated_size) { | |
| retval = -ENOMEM; | |
| goto out; | |
| } | |
| firmware_rw_data(fw_priv, buffer, offset, count, false); | |
| retval = count; | |
| } else { | |
| retval = fw_realloc_pages(fw_sysfs, offset + count); | |
| if (retval) | |
| goto out; | |
| retval = count; | |
| firmware_rw(fw_priv, buffer, offset, count, false); | |
| } | |
| fw_priv->size = max_t(size_t, offset + count, fw_priv->size); | |
| out: | |
| mutex_unlock(&fw_lock); | |
| return retval; | |
| } | |
| static struct bin_attribute firmware_attr_data = { | |
| .attr = { .name = "data", .mode = 0644 }, | |
| .size = 0, | |
| .read = firmware_data_read, | |
| .write = firmware_data_write, | |
| }; | |
| static struct attribute *fw_dev_attrs[] = { | |
| &dev_attr_loading.attr, | |
| NULL | |
| }; | |
| static struct bin_attribute *fw_dev_bin_attrs[] = { | |
| &firmware_attr_data, | |
| NULL | |
| }; | |
| static const struct attribute_group fw_dev_attr_group = { | |
| .attrs = fw_dev_attrs, | |
| .bin_attrs = fw_dev_bin_attrs, | |
| }; | |
| static const struct attribute_group *fw_dev_attr_groups[] = { | |
| &fw_dev_attr_group, | |
| NULL | |
| }; | |
| static struct fw_sysfs * | |
| fw_create_instance(struct firmware *firmware, const char *fw_name, | |
| struct device *device, enum fw_opt opt_flags) | |
| { | |
| struct fw_sysfs *fw_sysfs; | |
| struct device *f_dev; | |
| fw_sysfs = kzalloc(sizeof(*fw_sysfs), GFP_KERNEL); | |
| if (!fw_sysfs) { | |
| fw_sysfs = ERR_PTR(-ENOMEM); | |
| goto exit; | |
| } | |
| fw_sysfs->nowait = !!(opt_flags & FW_OPT_NOWAIT); | |
| fw_sysfs->fw = firmware; | |
| f_dev = &fw_sysfs->dev; | |
| device_initialize(f_dev); | |
| dev_set_name(f_dev, "%s", fw_name); | |
| f_dev->parent = device; | |
| f_dev->class = &firmware_class; | |
| f_dev->groups = fw_dev_attr_groups; | |
| exit: | |
| return fw_sysfs; | |
| } | |
| /** | |
| * fw_load_sysfs_fallback() - load a firmware via the sysfs fallback mechanism | |
| * @fw_sysfs: firmware sysfs information for the firmware to load | |
| * @opt_flags: flags of options, FW_OPT_* | |
| * @timeout: timeout to wait for the load | |
| * | |
| * In charge of constructing a sysfs fallback interface for firmware loading. | |
| **/ | |
| static int fw_load_sysfs_fallback(struct fw_sysfs *fw_sysfs, | |
| enum fw_opt opt_flags, long timeout) | |
| { | |
| int retval = 0; | |
| struct device *f_dev = &fw_sysfs->dev; | |
| struct fw_priv *fw_priv = fw_sysfs->fw_priv; | |
| /* fall back on userspace loading */ | |
| if (!fw_priv->data) | |
| fw_priv->is_paged_buf = true; | |
| dev_set_uevent_suppress(f_dev, true); | |
| retval = device_add(f_dev); | |
| if (retval) { | |
| dev_err(f_dev, "%s: device_register failed\n", __func__); | |
| goto err_put_dev; | |
| } | |
| mutex_lock(&fw_lock); | |
| list_add(&fw_priv->pending_list, &pending_fw_head); | |
| mutex_unlock(&fw_lock); | |
| if (opt_flags & FW_OPT_UEVENT) { | |
| fw_priv->need_uevent = true; | |
| dev_set_uevent_suppress(f_dev, false); | |
| dev_dbg(f_dev, "firmware: requesting %s\n", fw_priv->fw_name); | |
| kobject_uevent(&fw_sysfs->dev.kobj, KOBJ_ADD); | |
| } else { | |
| timeout = MAX_JIFFY_OFFSET; | |
| } | |
| retval = fw_sysfs_wait_timeout(fw_priv, timeout); | |
| if (retval < 0 && retval != -ENOENT) { | |
| mutex_lock(&fw_lock); | |
| fw_load_abort(fw_sysfs); | |
| mutex_unlock(&fw_lock); | |
| } | |
| if (fw_state_is_aborted(fw_priv)) { | |
| if (retval == -ERESTARTSYS) | |
| retval = -EINTR; | |
| else | |
| retval = -EAGAIN; | |
| } else if (fw_priv->is_paged_buf && !fw_priv->data) | |
| retval = -ENOMEM; | |
| device_del(f_dev); | |
| err_put_dev: | |
| put_device(f_dev); | |
| return retval; | |
| } | |
| static int fw_load_from_user_helper(struct firmware *firmware, | |
| const char *name, struct device *device, | |
| enum fw_opt opt_flags) | |
| { | |
| struct fw_sysfs *fw_sysfs; | |
| long timeout; | |
| int ret; | |
| timeout = firmware_loading_timeout(); | |
| if (opt_flags & FW_OPT_NOWAIT) { | |
| timeout = usermodehelper_read_lock_wait(timeout); | |
| if (!timeout) { | |
| dev_dbg(device, "firmware: %s loading timed out\n", | |
| name); | |
| return -EBUSY; | |
| } | |
| } else { | |
| ret = usermodehelper_read_trylock(); | |
| if (WARN_ON(ret)) { | |
| dev_err(device, "firmware: %s will not be loaded\n", | |
| name); | |
| return ret; | |
| } | |
| } | |
| fw_sysfs = fw_create_instance(firmware, name, device, opt_flags); | |
| if (IS_ERR(fw_sysfs)) { | |
| ret = PTR_ERR(fw_sysfs); | |
| goto out_unlock; | |
| } | |
| fw_sysfs->fw_priv = firmware->priv; | |
| ret = fw_load_sysfs_fallback(fw_sysfs, opt_flags, timeout); | |
| if (!ret) | |
| ret = assign_fw(firmware, device, opt_flags); | |
| out_unlock: | |
| usermodehelper_read_unlock(); | |
| return ret; | |
| } | |
| static bool fw_force_sysfs_fallback(enum fw_opt opt_flags) | |
| { | |
| if (fw_fallback_config.force_sysfs_fallback) | |
| return true; | |
| if (!(opt_flags & FW_OPT_USERHELPER)) | |
| return false; | |
| return true; | |
| } | |
| static bool fw_run_sysfs_fallback(enum fw_opt opt_flags) | |
| { | |
| int ret; | |
| if (fw_fallback_config.ignore_sysfs_fallback) { | |
| pr_info_once("Ignoring firmware sysfs fallback due to sysctl knob\n"); | |
| return false; | |
| } | |
| if ((opt_flags & FW_OPT_NOFALLBACK)) | |
| return false; | |
| /* Also permit LSMs and IMA to fail firmware sysfs fallback */ | |
| ret = security_kernel_load_data(LOADING_FIRMWARE); | |
| if (ret < 0) | |
| return false; | |
| return fw_force_sysfs_fallback(opt_flags); | |
| } | |
| /** | |
| * firmware_fallback_sysfs() - use the fallback mechanism to find firmware | |
| * @fw: pointer to firmware image | |
| * @name: name of firmware file to look for | |
| * @device: device for which firmware is being loaded | |
| * @opt_flags: options to control firmware loading behaviour | |
| * @ret: return value from direct lookup which triggered the fallback mechanism | |
| * | |
| * This function is called if direct lookup for the firmware failed, it enables | |
| * a fallback mechanism through userspace by exposing a sysfs loading | |
| * interface. Userspace is in charge of loading the firmware through the syfs | |
| * loading interface. This syfs fallback mechanism may be disabled completely | |
| * on a system by setting the proc sysctl value ignore_sysfs_fallback to true. | |
| * If this false we check if the internal API caller set the @FW_OPT_NOFALLBACK | |
| * flag, if so it would also disable the fallback mechanism. A system may want | |
| * to enfoce the sysfs fallback mechanism at all times, it can do this by | |
| * setting ignore_sysfs_fallback to false and force_sysfs_fallback to true. | |
| * Enabling force_sysfs_fallback is functionally equivalent to build a kernel | |
| * with CONFIG_FW_LOADER_USER_HELPER_FALLBACK. | |
| **/ | |
| int firmware_fallback_sysfs(struct firmware *fw, const char *name, | |
| struct device *device, | |
| enum fw_opt opt_flags, | |
| int ret) | |
| { | |
| if (!fw_run_sysfs_fallback(opt_flags)) | |
| return ret; | |
| if (!(opt_flags & FW_OPT_NO_WARN)) | |
| dev_warn(device, "Falling back to syfs fallback for: %s\n", | |
| name); | |
| else | |
| dev_dbg(device, "Falling back to sysfs fallback for: %s\n", | |
| name); | |
| return fw_load_from_user_helper(fw, name, device, opt_flags); | |
| } |