| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * V4L2 Driver for SuperH Mobile CEU interface |
| * |
| * Copyright (C) 2008 Magnus Damm |
| * |
| * Based on V4L2 Driver for PXA camera host - "pxa_camera.c", |
| * |
| * Copyright (C) 2006, Sascha Hauer, Pengutronix |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/moduleparam.h> |
| #include <linux/of.h> |
| #include <linux/time.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/videodev2.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sched.h> |
| |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-dev.h> |
| #include <media/soc_camera.h> |
| #include <media/drv-intf/sh_mobile_ceu.h> |
| #include <media/videobuf2-dma-contig.h> |
| #include <media/v4l2-mediabus.h> |
| #include <media/drv-intf/soc_mediabus.h> |
| |
| #include "soc_scale_crop.h" |
| |
| /* register offsets for sh7722 / sh7723 */ |
| |
| #define CAPSR 0x00 /* Capture start register */ |
| #define CAPCR 0x04 /* Capture control register */ |
| #define CAMCR 0x08 /* Capture interface control register */ |
| #define CMCYR 0x0c /* Capture interface cycle register */ |
| #define CAMOR 0x10 /* Capture interface offset register */ |
| #define CAPWR 0x14 /* Capture interface width register */ |
| #define CAIFR 0x18 /* Capture interface input format register */ |
| #define CSTCR 0x20 /* Camera strobe control register (<= sh7722) */ |
| #define CSECR 0x24 /* Camera strobe emission count register (<= sh7722) */ |
| #define CRCNTR 0x28 /* CEU register control register */ |
| #define CRCMPR 0x2c /* CEU register forcible control register */ |
| #define CFLCR 0x30 /* Capture filter control register */ |
| #define CFSZR 0x34 /* Capture filter size clip register */ |
| #define CDWDR 0x38 /* Capture destination width register */ |
| #define CDAYR 0x3c /* Capture data address Y register */ |
| #define CDACR 0x40 /* Capture data address C register */ |
| #define CDBYR 0x44 /* Capture data bottom-field address Y register */ |
| #define CDBCR 0x48 /* Capture data bottom-field address C register */ |
| #define CBDSR 0x4c /* Capture bundle destination size register */ |
| #define CFWCR 0x5c /* Firewall operation control register */ |
| #define CLFCR 0x60 /* Capture low-pass filter control register */ |
| #define CDOCR 0x64 /* Capture data output control register */ |
| #define CDDCR 0x68 /* Capture data complexity level register */ |
| #define CDDAR 0x6c /* Capture data complexity level address register */ |
| #define CEIER 0x70 /* Capture event interrupt enable register */ |
| #define CETCR 0x74 /* Capture event flag clear register */ |
| #define CSTSR 0x7c /* Capture status register */ |
| #define CSRTR 0x80 /* Capture software reset register */ |
| #define CDSSR 0x84 /* Capture data size register */ |
| #define CDAYR2 0x90 /* Capture data address Y register 2 */ |
| #define CDACR2 0x94 /* Capture data address C register 2 */ |
| #define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */ |
| #define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */ |
| |
| #undef DEBUG_GEOMETRY |
| #ifdef DEBUG_GEOMETRY |
| #define dev_geo dev_info |
| #else |
| #define dev_geo dev_dbg |
| #endif |
| |
| /* per video frame buffer */ |
| struct sh_mobile_ceu_buffer { |
| struct vb2_v4l2_buffer vb; /* v4l buffer must be first */ |
| struct list_head queue; |
| }; |
| |
| struct sh_mobile_ceu_dev { |
| struct soc_camera_host ici; |
| |
| unsigned int irq; |
| void __iomem *base; |
| size_t video_limit; |
| size_t buf_total; |
| |
| spinlock_t lock; /* Protects video buffer lists */ |
| struct list_head capture; |
| struct vb2_v4l2_buffer *active; |
| |
| struct sh_mobile_ceu_info *pdata; |
| struct completion complete; |
| |
| u32 cflcr; |
| |
| /* static max sizes either from platform data or default */ |
| int max_width; |
| int max_height; |
| |
| enum v4l2_field field; |
| int sequence; |
| unsigned long flags; |
| |
| unsigned int image_mode:1; |
| unsigned int is_16bit:1; |
| unsigned int frozen:1; |
| }; |
| |
| struct sh_mobile_ceu_cam { |
| /* CEU offsets within the camera output, before the CEU scaler */ |
| unsigned int ceu_left; |
| unsigned int ceu_top; |
| /* Client output, as seen by the CEU */ |
| unsigned int width; |
| unsigned int height; |
| /* |
| * User window from S_SELECTION / G_SELECTION, produced by client cropping and |
| * scaling, CEU scaling and CEU cropping, mapped back onto the client |
| * input window |
| */ |
| struct v4l2_rect subrect; |
| /* Camera cropping rectangle */ |
| struct v4l2_rect rect; |
| const struct soc_mbus_pixelfmt *extra_fmt; |
| u32 code; |
| }; |
| |
| static struct sh_mobile_ceu_buffer *to_ceu_vb(struct vb2_v4l2_buffer *vbuf) |
| { |
| return container_of(vbuf, struct sh_mobile_ceu_buffer, vb); |
| } |
| |
| static void ceu_write(struct sh_mobile_ceu_dev *priv, |
| unsigned long reg_offs, u32 data) |
| { |
| iowrite32(data, priv->base + reg_offs); |
| } |
| |
| static u32 ceu_read(struct sh_mobile_ceu_dev *priv, unsigned long reg_offs) |
| { |
| return ioread32(priv->base + reg_offs); |
| } |
| |
| static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev) |
| { |
| int i, success = 0; |
| |
| ceu_write(pcdev, CAPSR, 1 << 16); /* reset */ |
| |
| /* wait CSTSR.CPTON bit */ |
| for (i = 0; i < 1000; i++) { |
| if (!(ceu_read(pcdev, CSTSR) & 1)) { |
| success++; |
| break; |
| } |
| udelay(1); |
| } |
| |
| /* wait CAPSR.CPKIL bit */ |
| for (i = 0; i < 1000; i++) { |
| if (!(ceu_read(pcdev, CAPSR) & (1 << 16))) { |
| success++; |
| break; |
| } |
| udelay(1); |
| } |
| |
| if (2 != success) { |
| dev_warn(pcdev->ici.v4l2_dev.dev, "soft reset time out\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Videobuf operations |
| */ |
| |
| /* |
| * .queue_setup() is called to check, whether the driver can accept the |
| * requested number of buffers and to fill in plane sizes |
| * for the current frame format if required |
| */ |
| static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq, |
| unsigned int *count, unsigned int *num_planes, |
| unsigned int sizes[], struct device *alloc_devs[]) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vq); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| if (!vq->num_buffers) |
| pcdev->sequence = 0; |
| |
| if (!*count) |
| *count = 2; |
| |
| /* Called from VIDIOC_REQBUFS or in compatibility mode */ |
| if (!*num_planes) |
| sizes[0] = icd->sizeimage; |
| else if (sizes[0] < icd->sizeimage) |
| return -EINVAL; |
| |
| /* If *num_planes != 0, we have already verified *count. */ |
| if (pcdev->video_limit) { |
| size_t size = PAGE_ALIGN(sizes[0]) * *count; |
| |
| if (size + pcdev->buf_total > pcdev->video_limit) |
| *count = (pcdev->video_limit - pcdev->buf_total) / |
| PAGE_ALIGN(sizes[0]); |
| } |
| |
| *num_planes = 1; |
| |
| dev_dbg(icd->parent, "count=%d, size=%u\n", *count, sizes[0]); |
| |
| return 0; |
| } |
| |
| #define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */ |
| #define CEU_CETCR_IGRW (1 << 4) /* prohibited register access interrupt bit */ |
| #define CEU_CEIER_CPEIE (1 << 0) /* one-frame capture end interrupt */ |
| #define CEU_CEIER_VBP (1 << 20) /* vbp error */ |
| #define CEU_CAPCR_CTNCP (1 << 16) /* continuous capture mode (if set) */ |
| #define CEU_CEIER_MASK (CEU_CEIER_CPEIE | CEU_CEIER_VBP) |
| |
| |
| /* |
| * return value doesn't reflex the success/failure to queue the new buffer, |
| * but rather the status of the previous buffer. |
| */ |
| static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) |
| { |
| struct soc_camera_device *icd = pcdev->ici.icd; |
| dma_addr_t phys_addr_top, phys_addr_bottom; |
| unsigned long top1, top2; |
| unsigned long bottom1, bottom2; |
| u32 status; |
| bool planar; |
| int ret = 0; |
| |
| /* |
| * The hardware is _very_ picky about this sequence. Especially |
| * the CEU_CETCR_MAGIC value. It seems like we need to acknowledge |
| * several not-so-well documented interrupt sources in CETCR. |
| */ |
| ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) & ~CEU_CEIER_MASK); |
| status = ceu_read(pcdev, CETCR); |
| ceu_write(pcdev, CETCR, ~status & CEU_CETCR_MAGIC); |
| if (!pcdev->frozen) |
| ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) | CEU_CEIER_MASK); |
| ceu_write(pcdev, CAPCR, ceu_read(pcdev, CAPCR) & ~CEU_CAPCR_CTNCP); |
| ceu_write(pcdev, CETCR, CEU_CETCR_MAGIC ^ CEU_CETCR_IGRW); |
| |
| /* |
| * When a VBP interrupt occurs, a capture end interrupt does not occur |
| * and the image of that frame is not captured correctly. So, soft reset |
| * is needed here. |
| */ |
| if (status & CEU_CEIER_VBP) { |
| sh_mobile_ceu_soft_reset(pcdev); |
| ret = -EIO; |
| } |
| |
| if (pcdev->frozen) { |
| complete(&pcdev->complete); |
| return ret; |
| } |
| |
| if (!pcdev->active) |
| return ret; |
| |
| if (V4L2_FIELD_INTERLACED_BT == pcdev->field) { |
| top1 = CDBYR; |
| top2 = CDBCR; |
| bottom1 = CDAYR; |
| bottom2 = CDACR; |
| } else { |
| top1 = CDAYR; |
| top2 = CDACR; |
| bottom1 = CDBYR; |
| bottom2 = CDBCR; |
| } |
| |
| phys_addr_top = |
| vb2_dma_contig_plane_dma_addr(&pcdev->active->vb2_buf, 0); |
| |
| switch (icd->current_fmt->host_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| planar = true; |
| break; |
| default: |
| planar = false; |
| } |
| |
| ceu_write(pcdev, top1, phys_addr_top); |
| if (V4L2_FIELD_NONE != pcdev->field) { |
| phys_addr_bottom = phys_addr_top + icd->bytesperline; |
| ceu_write(pcdev, bottom1, phys_addr_bottom); |
| } |
| |
| if (planar) { |
| phys_addr_top += icd->bytesperline * icd->user_height; |
| ceu_write(pcdev, top2, phys_addr_top); |
| if (V4L2_FIELD_NONE != pcdev->field) { |
| phys_addr_bottom = phys_addr_top + icd->bytesperline; |
| ceu_write(pcdev, bottom2, phys_addr_bottom); |
| } |
| } |
| |
| ceu_write(pcdev, CAPSR, 0x1); /* start capture */ |
| |
| return ret; |
| } |
| |
| static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vbuf); |
| |
| /* Added list head initialization on alloc */ |
| WARN(!list_empty(&buf->queue), "Buffer %p on queue!\n", vb); |
| |
| return 0; |
| } |
| |
| static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vbuf); |
| unsigned long size; |
| |
| size = icd->sizeimage; |
| |
| if (vb2_plane_size(vb, 0) < size) { |
| dev_err(icd->parent, "Buffer #%d too small (%lu < %lu)\n", |
| vb->index, vb2_plane_size(vb, 0), size); |
| goto error; |
| } |
| |
| vb2_set_plane_payload(vb, 0, size); |
| |
| dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, |
| vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); |
| |
| #ifdef DEBUG |
| /* |
| * This can be useful if you want to see if we actually fill |
| * the buffer with something |
| */ |
| if (vb2_plane_vaddr(vb, 0)) |
| memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0)); |
| #endif |
| |
| spin_lock_irq(&pcdev->lock); |
| list_add_tail(&buf->queue, &pcdev->capture); |
| |
| if (!pcdev->active) { |
| /* |
| * Because there were no active buffer at this moment, |
| * we are not interested in the return value of |
| * sh_mobile_ceu_capture here. |
| */ |
| pcdev->active = vbuf; |
| sh_mobile_ceu_capture(pcdev); |
| } |
| spin_unlock_irq(&pcdev->lock); |
| |
| return; |
| |
| error: |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); |
| } |
| |
| static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vbuf); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| spin_lock_irq(&pcdev->lock); |
| |
| if (pcdev->active == vbuf) { |
| /* disable capture (release DMA buffer), reset */ |
| ceu_write(pcdev, CAPSR, 1 << 16); |
| pcdev->active = NULL; |
| } |
| |
| /* |
| * Doesn't hurt also if the list is empty, but it hurts, if queuing the |
| * buffer failed, and .buf_init() hasn't been called |
| */ |
| if (buf->queue.next) |
| list_del_init(&buf->queue); |
| |
| pcdev->buf_total -= PAGE_ALIGN(vb2_plane_size(vb, 0)); |
| dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__, |
| pcdev->buf_total); |
| |
| spin_unlock_irq(&pcdev->lock); |
| } |
| |
| static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| pcdev->buf_total += PAGE_ALIGN(vb2_plane_size(vb, 0)); |
| dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__, |
| pcdev->buf_total); |
| |
| /* This is for locking debugging only */ |
| INIT_LIST_HEAD(&to_ceu_vb(vbuf)->queue); |
| return 0; |
| } |
| |
| static void sh_mobile_ceu_stop_streaming(struct vb2_queue *q) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(q); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct list_head *buf_head, *tmp; |
| struct vb2_v4l2_buffer *vbuf; |
| |
| spin_lock_irq(&pcdev->lock); |
| |
| pcdev->active = NULL; |
| |
| list_for_each_safe(buf_head, tmp, &pcdev->capture) { |
| vbuf = &list_entry(buf_head, struct sh_mobile_ceu_buffer, |
| queue)->vb; |
| vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); |
| list_del_init(buf_head); |
| } |
| |
| spin_unlock_irq(&pcdev->lock); |
| |
| sh_mobile_ceu_soft_reset(pcdev); |
| } |
| |
| static const struct vb2_ops sh_mobile_ceu_videobuf_ops = { |
| .queue_setup = sh_mobile_ceu_videobuf_setup, |
| .buf_prepare = sh_mobile_ceu_videobuf_prepare, |
| .buf_queue = sh_mobile_ceu_videobuf_queue, |
| .buf_cleanup = sh_mobile_ceu_videobuf_release, |
| .buf_init = sh_mobile_ceu_videobuf_init, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| .stop_streaming = sh_mobile_ceu_stop_streaming, |
| }; |
| |
| static irqreturn_t sh_mobile_ceu_irq(int irq, void *data) |
| { |
| struct sh_mobile_ceu_dev *pcdev = data; |
| struct vb2_v4l2_buffer *vbuf; |
| int ret; |
| |
| spin_lock(&pcdev->lock); |
| |
| vbuf = pcdev->active; |
| if (!vbuf) |
| /* Stale interrupt from a released buffer */ |
| goto out; |
| |
| list_del_init(&to_ceu_vb(vbuf)->queue); |
| |
| if (!list_empty(&pcdev->capture)) |
| pcdev->active = &list_entry(pcdev->capture.next, |
| struct sh_mobile_ceu_buffer, queue)->vb; |
| else |
| pcdev->active = NULL; |
| |
| ret = sh_mobile_ceu_capture(pcdev); |
| vbuf->vb2_buf.timestamp = ktime_get_ns(); |
| if (!ret) { |
| vbuf->field = pcdev->field; |
| vbuf->sequence = pcdev->sequence++; |
| } |
| vb2_buffer_done(&vbuf->vb2_buf, |
| ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); |
| |
| out: |
| spin_unlock(&pcdev->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) |
| { |
| dev_info(icd->parent, |
| "SuperH Mobile CEU driver attached to camera %d\n", |
| icd->devnum); |
| |
| return 0; |
| } |
| |
| static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) |
| { |
| dev_info(icd->parent, |
| "SuperH Mobile CEU driver detached from camera %d\n", |
| icd->devnum); |
| } |
| |
| /* Called with .host_lock held */ |
| static int sh_mobile_ceu_clock_start(struct soc_camera_host *ici) |
| { |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| pm_runtime_get_sync(ici->v4l2_dev.dev); |
| |
| pcdev->buf_total = 0; |
| |
| sh_mobile_ceu_soft_reset(pcdev); |
| |
| return 0; |
| } |
| |
| /* Called with .host_lock held */ |
| static void sh_mobile_ceu_clock_stop(struct soc_camera_host *ici) |
| { |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| /* disable capture, disable interrupts */ |
| ceu_write(pcdev, CEIER, 0); |
| sh_mobile_ceu_soft_reset(pcdev); |
| |
| /* make sure active buffer is canceled */ |
| spin_lock_irq(&pcdev->lock); |
| if (pcdev->active) { |
| list_del_init(&to_ceu_vb(pcdev->active)->queue); |
| vb2_buffer_done(&pcdev->active->vb2_buf, VB2_BUF_STATE_ERROR); |
| pcdev->active = NULL; |
| } |
| spin_unlock_irq(&pcdev->lock); |
| |
| pm_runtime_put(ici->v4l2_dev.dev); |
| } |
| |
| /* |
| * See chapter 29.4.12 "Capture Filter Control Register (CFLCR)" |
| * in SH7722 Hardware Manual |
| */ |
| static unsigned int size_dst(unsigned int src, unsigned int scale) |
| { |
| unsigned int mant_pre = scale >> 12; |
| if (!src || !scale) |
| return src; |
| return ((mant_pre + 2 * (src - 1)) / (2 * mant_pre) - 1) * |
| mant_pre * 4096 / scale + 1; |
| } |
| |
| static u16 calc_scale(unsigned int src, unsigned int *dst) |
| { |
| u16 scale; |
| |
| if (src == *dst) |
| return 0; |
| |
| scale = (src * 4096 / *dst) & ~7; |
| |
| while (scale > 4096 && size_dst(src, scale) < *dst) |
| scale -= 8; |
| |
| *dst = size_dst(src, scale); |
| |
| return scale; |
| } |
| |
| /* rect is guaranteed to not exceed the scaled camera rectangle */ |
| static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| unsigned int height, width, cdwdr_width, in_width, in_height; |
| unsigned int left_offset, top_offset; |
| u32 camor; |
| |
| dev_geo(icd->parent, "Crop %ux%u@%u:%u\n", |
| icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top); |
| |
| left_offset = cam->ceu_left; |
| top_offset = cam->ceu_top; |
| |
| WARN_ON(icd->user_width & 3 || icd->user_height & 3); |
| |
| width = icd->user_width; |
| |
| if (pcdev->image_mode) { |
| in_width = cam->width; |
| if (!pcdev->is_16bit) { |
| in_width *= 2; |
| left_offset *= 2; |
| } |
| } else { |
| unsigned int w_factor; |
| |
| switch (icd->current_fmt->host_fmt->packing) { |
| case SOC_MBUS_PACKING_2X8_PADHI: |
| w_factor = 2; |
| break; |
| default: |
| w_factor = 1; |
| } |
| |
| in_width = cam->width * w_factor; |
| left_offset *= w_factor; |
| } |
| |
| cdwdr_width = icd->bytesperline; |
| |
| height = icd->user_height; |
| in_height = cam->height; |
| if (V4L2_FIELD_NONE != pcdev->field) { |
| height = (height / 2) & ~3; |
| in_height /= 2; |
| top_offset /= 2; |
| cdwdr_width *= 2; |
| } |
| |
| /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ |
| camor = left_offset | (top_offset << 16); |
| |
| dev_geo(icd->parent, |
| "CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor, |
| (in_height << 16) | in_width, (height << 16) | width, |
| cdwdr_width); |
| |
| ceu_write(pcdev, CAMOR, camor); |
| ceu_write(pcdev, CAPWR, (in_height << 16) | in_width); |
| /* CFSZR clipping is applied _after_ the scaling filter (CFLCR) */ |
| ceu_write(pcdev, CFSZR, (height << 16) | width); |
| ceu_write(pcdev, CDWDR, cdwdr_width); |
| } |
| |
| static u32 capture_save_reset(struct sh_mobile_ceu_dev *pcdev) |
| { |
| u32 capsr = ceu_read(pcdev, CAPSR); |
| ceu_write(pcdev, CAPSR, 1 << 16); /* reset, stop capture */ |
| return capsr; |
| } |
| |
| static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr) |
| { |
| unsigned long timeout = jiffies + 10 * HZ; |
| |
| /* |
| * Wait until the end of the current frame. It can take a long time, |
| * but if it has been aborted by a CAPSR reset, it shoule exit sooner. |
| */ |
| while ((ceu_read(pcdev, CSTSR) & 1) && time_before(jiffies, timeout)) |
| msleep(1); |
| |
| if (time_after(jiffies, timeout)) { |
| dev_err(pcdev->ici.v4l2_dev.dev, |
| "Timeout waiting for frame end! Interface problem?\n"); |
| return; |
| } |
| |
| /* Wait until reset clears, this shall not hang... */ |
| while (ceu_read(pcdev, CAPSR) & (1 << 16)) |
| udelay(10); |
| |
| /* Anything to restore? */ |
| if (capsr & ~(1 << 16)) |
| ceu_write(pcdev, CAPSR, capsr); |
| } |
| |
| #define CEU_BUS_FLAGS (V4L2_MBUS_MASTER | \ |
| V4L2_MBUS_PCLK_SAMPLE_RISING | \ |
| V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ |
| V4L2_MBUS_HSYNC_ACTIVE_LOW | \ |
| V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ |
| V4L2_MBUS_VSYNC_ACTIVE_LOW | \ |
| V4L2_MBUS_DATA_ACTIVE_HIGH) |
| |
| /* Capture is not running, no interrupts, no locking needed */ |
| static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; |
| unsigned long value, common_flags = CEU_BUS_FLAGS; |
| u32 capsr = capture_save_reset(pcdev); |
| unsigned int yuv_lineskip; |
| int ret; |
| |
| /* |
| * If the client doesn't implement g_mbus_config, we just use our |
| * platform data |
| */ |
| ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); |
| if (!ret) { |
| common_flags = soc_mbus_config_compatible(&cfg, |
| common_flags); |
| if (!common_flags) |
| return -EINVAL; |
| } else if (ret != -ENOIOCTLCMD) { |
| return ret; |
| } |
| |
| /* Make choises, based on platform preferences */ |
| if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && |
| (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { |
| if (pcdev->flags & SH_CEU_FLAG_HSYNC_LOW) |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; |
| else |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; |
| } |
| |
| if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) && |
| (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) { |
| if (pcdev->flags & SH_CEU_FLAG_VSYNC_LOW) |
| common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH; |
| else |
| common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW; |
| } |
| |
| cfg.flags = common_flags; |
| ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg); |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| return ret; |
| |
| if (icd->current_fmt->host_fmt->bits_per_sample > 8) |
| pcdev->is_16bit = 1; |
| else |
| pcdev->is_16bit = 0; |
| |
| ceu_write(pcdev, CRCNTR, 0); |
| ceu_write(pcdev, CRCMPR, 0); |
| |
| value = 0x00000010; /* data fetch by default */ |
| yuv_lineskip = 0x10; |
| |
| switch (icd->current_fmt->host_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| /* convert 4:2:2 -> 4:2:0 */ |
| yuv_lineskip = 0; /* skip for NV12/21, no skip for NV16/61 */ |
| /* fall-through */ |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| switch (cam->code) { |
| case MEDIA_BUS_FMT_UYVY8_2X8: |
| value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */ |
| break; |
| case MEDIA_BUS_FMT_VYUY8_2X8: |
| value = 0x00000100; /* Cr0, Y0, Cb0, Y1 */ |
| break; |
| case MEDIA_BUS_FMT_YUYV8_2X8: |
| value = 0x00000200; /* Y0, Cb0, Y1, Cr0 */ |
| break; |
| case MEDIA_BUS_FMT_YVYU8_2X8: |
| value = 0x00000300; /* Y0, Cr0, Y1, Cb0 */ |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| if (icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV21 || |
| icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV61) |
| value ^= 0x00000100; /* swap U, V to change from NV1x->NVx1 */ |
| |
| value |= common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0; |
| value |= common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0; |
| |
| if (pcdev->is_16bit) |
| value |= 1 << 12; |
| else if (pcdev->flags & SH_CEU_FLAG_LOWER_8BIT) |
| value |= 2 << 12; |
| |
| ceu_write(pcdev, CAMCR, value); |
| |
| ceu_write(pcdev, CAPCR, 0x00300000); |
| |
| switch (pcdev->field) { |
| case V4L2_FIELD_INTERLACED_TB: |
| value = 0x101; |
| break; |
| case V4L2_FIELD_INTERLACED_BT: |
| value = 0x102; |
| break; |
| default: |
| value = 0; |
| break; |
| } |
| ceu_write(pcdev, CAIFR, value); |
| |
| sh_mobile_ceu_set_rect(icd); |
| mdelay(1); |
| |
| dev_geo(icd->parent, "CFLCR 0x%x\n", pcdev->cflcr); |
| ceu_write(pcdev, CFLCR, pcdev->cflcr); |
| |
| /* |
| * A few words about byte order (observed in Big Endian mode) |
| * |
| * In data fetch mode bytes are received in chunks of 8 bytes. |
| * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first) |
| * |
| * The data is however by default written to memory in reverse order: |
| * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte) |
| * |
| * The lowest three bits of CDOCR allows us to do swapping, |
| * using 7 we swap the data bytes to match the incoming order: |
| * D0, D1, D2, D3, D4, D5, D6, D7 |
| */ |
| value = 0x00000007 | yuv_lineskip; |
| |
| ceu_write(pcdev, CDOCR, value); |
| ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ |
| |
| capture_restore(pcdev, capsr); |
| |
| /* not in bundle mode: skip CBDSR, CDAYR2, CDACR2, CDBYR2, CDBCR2 */ |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd, |
| unsigned char buswidth) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| unsigned long common_flags = CEU_BUS_FLAGS; |
| struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; |
| int ret; |
| |
| ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); |
| if (!ret) |
| common_flags = soc_mbus_config_compatible(&cfg, |
| common_flags); |
| else if (ret != -ENOIOCTLCMD) |
| return ret; |
| |
| if (!common_flags || buswidth > 16) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const struct soc_mbus_pixelfmt sh_mobile_ceu_formats[] = { |
| { |
| .fourcc = V4L2_PIX_FMT_NV12, |
| .name = "NV12", |
| .bits_per_sample = 8, |
| .packing = SOC_MBUS_PACKING_1_5X8, |
| .order = SOC_MBUS_ORDER_LE, |
| .layout = SOC_MBUS_LAYOUT_PLANAR_2Y_C, |
| }, { |
| .fourcc = V4L2_PIX_FMT_NV21, |
| .name = "NV21", |
| .bits_per_sample = 8, |
| .packing = SOC_MBUS_PACKING_1_5X8, |
| .order = SOC_MBUS_ORDER_LE, |
| .layout = SOC_MBUS_LAYOUT_PLANAR_2Y_C, |
| }, { |
| .fourcc = V4L2_PIX_FMT_NV16, |
| .name = "NV16", |
| .bits_per_sample = 8, |
| .packing = SOC_MBUS_PACKING_2X8_PADHI, |
| .order = SOC_MBUS_ORDER_LE, |
| .layout = SOC_MBUS_LAYOUT_PLANAR_Y_C, |
| }, { |
| .fourcc = V4L2_PIX_FMT_NV61, |
| .name = "NV61", |
| .bits_per_sample = 8, |
| .packing = SOC_MBUS_PACKING_2X8_PADHI, |
| .order = SOC_MBUS_ORDER_LE, |
| .layout = SOC_MBUS_LAYOUT_PLANAR_Y_C, |
| }, |
| }; |
| |
| /* This will be corrected as we get more formats */ |
| static bool sh_mobile_ceu_packing_supported(const struct soc_mbus_pixelfmt *fmt) |
| { |
| return fmt->packing == SOC_MBUS_PACKING_NONE || |
| (fmt->bits_per_sample == 8 && |
| fmt->packing == SOC_MBUS_PACKING_1_5X8) || |
| (fmt->bits_per_sample == 8 && |
| fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) || |
| (fmt->bits_per_sample > 8 && |
| fmt->packing == SOC_MBUS_PACKING_EXTEND16); |
| } |
| |
| static struct soc_camera_device *ctrl_to_icd(struct v4l2_ctrl *ctrl) |
| { |
| return container_of(ctrl->handler, struct soc_camera_device, |
| ctrl_handler); |
| } |
| |
| static int sh_mobile_ceu_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct soc_camera_device *icd = ctrl_to_icd(ctrl); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_SHARPNESS: |
| switch (icd->current_fmt->host_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| ceu_write(pcdev, CLFCR, !ctrl->val); |
| return 0; |
| } |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct v4l2_ctrl_ops sh_mobile_ceu_ctrl_ops = { |
| .s_ctrl = sh_mobile_ceu_s_ctrl, |
| }; |
| |
| static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx, |
| struct soc_camera_format_xlate *xlate) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct device *dev = icd->parent; |
| struct soc_camera_host *ici = to_soc_camera_host(dev); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| int ret, k, n; |
| int formats = 0; |
| struct sh_mobile_ceu_cam *cam; |
| struct v4l2_subdev_mbus_code_enum code = { |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| .index = idx, |
| }; |
| const struct soc_mbus_pixelfmt *fmt; |
| |
| ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); |
| if (ret < 0) |
| /* No more formats */ |
| return 0; |
| |
| fmt = soc_mbus_get_fmtdesc(code.code); |
| if (!fmt) { |
| dev_warn(dev, "unsupported format code #%u: %d\n", idx, code.code); |
| return 0; |
| } |
| |
| ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample); |
| if (ret < 0) |
| return 0; |
| |
| if (!icd->host_priv) { |
| struct v4l2_subdev_format fmt = { |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| }; |
| struct v4l2_mbus_framefmt *mf = &fmt.format; |
| struct v4l2_rect rect; |
| int shift = 0; |
| |
| /* Add our control */ |
| v4l2_ctrl_new_std(&icd->ctrl_handler, &sh_mobile_ceu_ctrl_ops, |
| V4L2_CID_SHARPNESS, 0, 1, 1, 1); |
| if (icd->ctrl_handler.error) |
| return icd->ctrl_handler.error; |
| |
| /* FIXME: subwindow is lost between close / open */ |
| |
| /* Cache current client geometry */ |
| ret = soc_camera_client_g_rect(sd, &rect); |
| if (ret < 0) |
| return ret; |
| |
| /* First time */ |
| ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * All currently existing CEU implementations support 2560x1920 |
| * or larger frames. If the sensor is proposing too big a frame, |
| * don't bother with possibly supportred by the CEU larger |
| * sizes, just try VGA multiples. If needed, this can be |
| * adjusted in the future. |
| */ |
| while ((mf->width > pcdev->max_width || |
| mf->height > pcdev->max_height) && shift < 4) { |
| /* Try 2560x1920, 1280x960, 640x480, 320x240 */ |
| mf->width = 2560 >> shift; |
| mf->height = 1920 >> shift; |
| ret = v4l2_device_call_until_err(sd->v4l2_dev, |
| soc_camera_grp_id(icd), pad, |
| set_fmt, NULL, &fmt); |
| if (ret < 0) |
| return ret; |
| shift++; |
| } |
| |
| if (shift == 4) { |
| dev_err(dev, "Failed to configure the client below %ux%x\n", |
| mf->width, mf->height); |
| return -EIO; |
| } |
| |
| dev_geo(dev, "camera fmt %ux%u\n", mf->width, mf->height); |
| |
| cam = kzalloc(sizeof(*cam), GFP_KERNEL); |
| if (!cam) |
| return -ENOMEM; |
| |
| /* We are called with current camera crop, initialise subrect with it */ |
| cam->rect = rect; |
| cam->subrect = rect; |
| |
| cam->width = mf->width; |
| cam->height = mf->height; |
| |
| icd->host_priv = cam; |
| } else { |
| cam = icd->host_priv; |
| } |
| |
| /* Beginning of a pass */ |
| if (!idx) |
| cam->extra_fmt = NULL; |
| |
| switch (code.code) { |
| case MEDIA_BUS_FMT_UYVY8_2X8: |
| case MEDIA_BUS_FMT_VYUY8_2X8: |
| case MEDIA_BUS_FMT_YUYV8_2X8: |
| case MEDIA_BUS_FMT_YVYU8_2X8: |
| if (cam->extra_fmt) |
| break; |
| |
| /* |
| * Our case is simple so far: for any of the above four camera |
| * formats we add all our four synthesized NV* formats, so, |
| * just marking the device with a single flag suffices. If |
| * the format generation rules are more complex, you would have |
| * to actually hang your already added / counted formats onto |
| * the host_priv pointer and check whether the format you're |
| * going to add now is already there. |
| */ |
| cam->extra_fmt = sh_mobile_ceu_formats; |
| |
| n = ARRAY_SIZE(sh_mobile_ceu_formats); |
| formats += n; |
| for (k = 0; xlate && k < n; k++) { |
| xlate->host_fmt = &sh_mobile_ceu_formats[k]; |
| xlate->code = code.code; |
| xlate++; |
| dev_dbg(dev, "Providing format %s using code %d\n", |
| sh_mobile_ceu_formats[k].name, code.code); |
| } |
| break; |
| default: |
| if (!sh_mobile_ceu_packing_supported(fmt)) |
| return 0; |
| } |
| |
| /* Generic pass-through */ |
| formats++; |
| if (xlate) { |
| xlate->host_fmt = fmt; |
| xlate->code = code.code; |
| xlate++; |
| dev_dbg(dev, "Providing format %s in pass-through mode\n", |
| fmt->name); |
| } |
| |
| return formats; |
| } |
| |
| static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) |
| { |
| kfree(icd->host_priv); |
| icd->host_priv = NULL; |
| } |
| |
| #define scale_down(size, scale) soc_camera_shift_scale(size, 12, scale) |
| #define calc_generic_scale(in, out) soc_camera_calc_scale(in, 12, out) |
| |
| /* |
| * CEU can scale and crop, but we don't want to waste bandwidth and kill the |
| * framerate by always requesting the maximum image from the client. See |
| * Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst for a description of |
| * scaling and cropping algorithms and for the meaning of referenced here steps. |
| */ |
| static int sh_mobile_ceu_set_selection(struct soc_camera_device *icd, |
| struct v4l2_selection *sel) |
| { |
| struct v4l2_rect *rect = &sel->r; |
| struct device *dev = icd->parent; |
| struct soc_camera_host *ici = to_soc_camera_host(dev); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct v4l2_selection cam_sel; |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_rect *cam_rect = &cam_sel.r; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct v4l2_subdev_format fmt = { |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| }; |
| struct v4l2_mbus_framefmt *mf = &fmt.format; |
| unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v, |
| out_width, out_height; |
| int interm_width, interm_height; |
| u32 capsr, cflcr; |
| int ret; |
| |
| dev_geo(dev, "S_SELECTION(%ux%u@%u:%u)\n", rect->width, rect->height, |
| rect->left, rect->top); |
| |
| /* During camera cropping its output window can change too, stop CEU */ |
| capsr = capture_save_reset(pcdev); |
| dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr); |
| |
| /* |
| * 1. - 2. Apply iterative camera S_SELECTION for new input window, read back |
| * actual camera rectangle. |
| */ |
| ret = soc_camera_client_s_selection(sd, sel, &cam_sel, |
| &cam->rect, &cam->subrect); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "1-2: camera cropped to %ux%u@%u:%u\n", |
| cam_rect->width, cam_rect->height, |
| cam_rect->left, cam_rect->top); |
| |
| /* On success cam_crop contains current camera crop */ |
| |
| /* 3. Retrieve camera output window */ |
| ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); |
| if (ret < 0) |
| return ret; |
| |
| if (mf->width > pcdev->max_width || mf->height > pcdev->max_height) |
| return -EINVAL; |
| |
| /* 4. Calculate camera scales */ |
| scale_cam_h = calc_generic_scale(cam_rect->width, mf->width); |
| scale_cam_v = calc_generic_scale(cam_rect->height, mf->height); |
| |
| /* Calculate intermediate window */ |
| interm_width = scale_down(rect->width, scale_cam_h); |
| interm_height = scale_down(rect->height, scale_cam_v); |
| |
| if (interm_width < icd->user_width) { |
| u32 new_scale_h; |
| |
| new_scale_h = calc_generic_scale(rect->width, icd->user_width); |
| |
| mf->width = scale_down(cam_rect->width, new_scale_h); |
| } |
| |
| if (interm_height < icd->user_height) { |
| u32 new_scale_v; |
| |
| new_scale_v = calc_generic_scale(rect->height, icd->user_height); |
| |
| mf->height = scale_down(cam_rect->height, new_scale_v); |
| } |
| |
| if (interm_width < icd->user_width || interm_height < icd->user_height) { |
| ret = v4l2_device_call_until_err(sd->v4l2_dev, |
| soc_camera_grp_id(icd), pad, |
| set_fmt, NULL, &fmt); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "New camera output %ux%u\n", mf->width, mf->height); |
| scale_cam_h = calc_generic_scale(cam_rect->width, mf->width); |
| scale_cam_v = calc_generic_scale(cam_rect->height, mf->height); |
| interm_width = scale_down(rect->width, scale_cam_h); |
| interm_height = scale_down(rect->height, scale_cam_v); |
| } |
| |
| /* Cache camera output window */ |
| cam->width = mf->width; |
| cam->height = mf->height; |
| |
| if (pcdev->image_mode) { |
| out_width = min(interm_width, icd->user_width); |
| out_height = min(interm_height, icd->user_height); |
| } else { |
| out_width = interm_width; |
| out_height = interm_height; |
| } |
| |
| /* |
| * 5. Calculate CEU scales from camera scales from results of (5) and |
| * the user window |
| */ |
| scale_ceu_h = calc_scale(interm_width, &out_width); |
| scale_ceu_v = calc_scale(interm_height, &out_height); |
| |
| dev_geo(dev, "5: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v); |
| |
| /* Apply CEU scales. */ |
| cflcr = scale_ceu_h | (scale_ceu_v << 16); |
| if (cflcr != pcdev->cflcr) { |
| pcdev->cflcr = cflcr; |
| ceu_write(pcdev, CFLCR, cflcr); |
| } |
| |
| icd->user_width = out_width & ~3; |
| icd->user_height = out_height & ~3; |
| /* Offsets are applied at the CEU scaling filter input */ |
| cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_cam_h) & ~1; |
| cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_cam_v) & ~1; |
| |
| /* 6. Use CEU cropping to crop to the new window. */ |
| sh_mobile_ceu_set_rect(icd); |
| |
| cam->subrect = *rect; |
| |
| dev_geo(dev, "6: CEU cropped to %ux%u@%u:%u\n", |
| icd->user_width, icd->user_height, |
| cam->ceu_left, cam->ceu_top); |
| |
| /* Restore capture. The CE bit can be cleared by the hardware */ |
| if (pcdev->active) |
| capsr |= 1; |
| capture_restore(pcdev, capsr); |
| |
| /* Even if only camera cropping succeeded */ |
| return ret; |
| } |
| |
| static int sh_mobile_ceu_get_selection(struct soc_camera_device *icd, |
| struct v4l2_selection *sel) |
| { |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| |
| sel->r = cam->subrect; |
| |
| return 0; |
| } |
| |
| /* Similar to set_crop multistage iterative algorithm */ |
| static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| struct device *dev = icd->parent; |
| struct soc_camera_host *ici = to_soc_camera_host(dev); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_mbus_framefmt mf; |
| __u32 pixfmt = pix->pixelformat; |
| const struct soc_camera_format_xlate *xlate; |
| unsigned int ceu_sub_width = pcdev->max_width, |
| ceu_sub_height = pcdev->max_height; |
| u16 scale_v, scale_h; |
| int ret; |
| bool image_mode; |
| enum v4l2_field field; |
| |
| switch (pix->field) { |
| default: |
| pix->field = V4L2_FIELD_NONE; |
| /* fall-through */ |
| case V4L2_FIELD_INTERLACED_TB: |
| case V4L2_FIELD_INTERLACED_BT: |
| case V4L2_FIELD_NONE: |
| field = pix->field; |
| break; |
| case V4L2_FIELD_INTERLACED: |
| field = V4L2_FIELD_INTERLACED_TB; |
| break; |
| } |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); |
| if (!xlate) { |
| dev_warn(dev, "Format %x not found\n", pixfmt); |
| return -EINVAL; |
| } |
| |
| /* 1.-4. Calculate desired client output geometry */ |
| soc_camera_calc_client_output(icd, &cam->rect, &cam->subrect, pix, &mf, 12); |
| mf.field = pix->field; |
| mf.colorspace = pix->colorspace; |
| mf.code = xlate->code; |
| |
| switch (pixfmt) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| image_mode = true; |
| break; |
| default: |
| image_mode = false; |
| } |
| |
| dev_geo(dev, "S_FMT(pix=0x%x, fld 0x%x, code 0x%x, %ux%u)\n", pixfmt, mf.field, mf.code, |
| pix->width, pix->height); |
| |
| dev_geo(dev, "4: request camera output %ux%u\n", mf.width, mf.height); |
| |
| /* 5. - 9. */ |
| ret = soc_camera_client_scale(icd, &cam->rect, &cam->subrect, |
| &mf, &ceu_sub_width, &ceu_sub_height, |
| image_mode && V4L2_FIELD_NONE == field, 12); |
| |
| dev_geo(dev, "5-9: client scale return %d\n", ret); |
| |
| /* Done with the camera. Now see if we can improve the result */ |
| |
| dev_geo(dev, "fmt %ux%u, requested %ux%u\n", |
| mf.width, mf.height, pix->width, pix->height); |
| if (ret < 0) |
| return ret; |
| |
| if (mf.code != xlate->code) |
| return -EINVAL; |
| |
| /* 9. Prepare CEU crop */ |
| cam->width = mf.width; |
| cam->height = mf.height; |
| |
| /* 10. Use CEU scaling to scale to the requested user window. */ |
| |
| /* We cannot scale up */ |
| if (pix->width > ceu_sub_width) |
| ceu_sub_width = pix->width; |
| |
| if (pix->height > ceu_sub_height) |
| ceu_sub_height = pix->height; |
| |
| pix->colorspace = mf.colorspace; |
| |
| if (image_mode) { |
| /* Scale pix->{width x height} down to width x height */ |
| scale_h = calc_scale(ceu_sub_width, &pix->width); |
| scale_v = calc_scale(ceu_sub_height, &pix->height); |
| } else { |
| pix->width = ceu_sub_width; |
| pix->height = ceu_sub_height; |
| scale_h = 0; |
| scale_v = 0; |
| } |
| |
| pcdev->cflcr = scale_h | (scale_v << 16); |
| |
| /* |
| * We have calculated CFLCR, the actual configuration will be performed |
| * in sh_mobile_ceu_set_bus_param() |
| */ |
| |
| dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n", |
| ceu_sub_width, scale_h, pix->width, |
| ceu_sub_height, scale_v, pix->height); |
| |
| cam->code = xlate->code; |
| icd->current_fmt = xlate; |
| |
| pcdev->field = field; |
| pcdev->image_mode = image_mode; |
| |
| /* CFSZR requirement */ |
| pix->width &= ~3; |
| pix->height &= ~3; |
| |
| return 0; |
| } |
| |
| #define CEU_CHDW_MAX 8188U /* Maximum line stride */ |
| |
| static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| const struct soc_camera_format_xlate *xlate; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct v4l2_subdev_pad_config pad_cfg; |
| struct v4l2_subdev_format format = { |
| .which = V4L2_SUBDEV_FORMAT_TRY, |
| }; |
| struct v4l2_mbus_framefmt *mf = &format.format; |
| __u32 pixfmt = pix->pixelformat; |
| int width, height; |
| int ret; |
| |
| dev_geo(icd->parent, "TRY_FMT(pix=0x%x, %ux%u)\n", |
| pixfmt, pix->width, pix->height); |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); |
| if (!xlate) { |
| xlate = icd->current_fmt; |
| dev_dbg(icd->parent, "Format %x not found, keeping %x\n", |
| pixfmt, xlate->host_fmt->fourcc); |
| pixfmt = xlate->host_fmt->fourcc; |
| pix->pixelformat = pixfmt; |
| pix->colorspace = icd->colorspace; |
| } |
| |
| /* FIXME: calculate using depth and bus width */ |
| |
| /* CFSZR requires height and width to be 4-pixel aligned */ |
| v4l_bound_align_image(&pix->width, 2, pcdev->max_width, 2, |
| &pix->height, 4, pcdev->max_height, 2, 0); |
| |
| width = pix->width; |
| height = pix->height; |
| |
| /* limit to sensor capabilities */ |
| mf->width = pix->width; |
| mf->height = pix->height; |
| mf->field = pix->field; |
| mf->code = xlate->code; |
| mf->colorspace = pix->colorspace; |
| |
| ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), |
| pad, set_fmt, &pad_cfg, &format); |
| if (ret < 0) |
| return ret; |
| |
| pix->width = mf->width; |
| pix->height = mf->height; |
| pix->field = mf->field; |
| pix->colorspace = mf->colorspace; |
| |
| switch (pixfmt) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| /* FIXME: check against rect_max after converting soc-camera */ |
| /* We can scale precisely, need a bigger image from camera */ |
| if (pix->width < width || pix->height < height) { |
| /* |
| * We presume, the sensor behaves sanely, i.e., if |
| * requested a bigger rectangle, it will not return a |
| * smaller one. |
| */ |
| mf->width = pcdev->max_width; |
| mf->height = pcdev->max_height; |
| ret = v4l2_device_call_until_err(sd->v4l2_dev, |
| soc_camera_grp_id(icd), pad, |
| set_fmt, &pad_cfg, &format); |
| if (ret < 0) { |
| /* Shouldn't actually happen... */ |
| dev_err(icd->parent, |
| "FIXME: client try_fmt() = %d\n", ret); |
| return ret; |
| } |
| } |
| /* We will scale exactly */ |
| if (mf->width > width) |
| pix->width = width; |
| if (mf->height > height) |
| pix->height = height; |
| |
| pix->bytesperline = max(pix->bytesperline, pix->width); |
| pix->bytesperline = min(pix->bytesperline, CEU_CHDW_MAX); |
| pix->bytesperline &= ~3; |
| break; |
| |
| default: |
| /* Configurable stride isn't supported in pass-through mode. */ |
| pix->bytesperline = 0; |
| } |
| |
| pix->width &= ~3; |
| pix->height &= ~3; |
| pix->sizeimage = 0; |
| |
| dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n", |
| __func__, ret, pix->pixelformat, pix->width, pix->height); |
| |
| return ret; |
| } |
| |
| static int sh_mobile_ceu_set_liveselection(struct soc_camera_device *icd, |
| struct v4l2_selection *sel) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| u32 out_width = icd->user_width, out_height = icd->user_height; |
| int ret; |
| |
| /* Freeze queue */ |
| pcdev->frozen = 1; |
| /* Wait for frame */ |
| ret = wait_for_completion_interruptible(&pcdev->complete); |
| /* Stop the client */ |
| ret = v4l2_subdev_call(sd, video, s_stream, 0); |
| if (ret < 0) |
| dev_warn(icd->parent, |
| "Client failed to stop the stream: %d\n", ret); |
| else |
| /* Do the crop, if it fails, there's nothing more we can do */ |
| sh_mobile_ceu_set_selection(icd, sel); |
| |
| dev_geo(icd->parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height); |
| |
| if (icd->user_width != out_width || icd->user_height != out_height) { |
| struct v4l2_format f = { |
| .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| .fmt.pix = { |
| .width = out_width, |
| .height = out_height, |
| .pixelformat = icd->current_fmt->host_fmt->fourcc, |
| .field = pcdev->field, |
| .colorspace = icd->colorspace, |
| }, |
| }; |
| ret = sh_mobile_ceu_set_fmt(icd, &f); |
| if (!ret && (out_width != f.fmt.pix.width || |
| out_height != f.fmt.pix.height)) |
| ret = -EINVAL; |
| if (!ret) { |
| icd->user_width = out_width & ~3; |
| icd->user_height = out_height & ~3; |
| ret = sh_mobile_ceu_set_bus_param(icd); |
| } |
| } |
| |
| /* Thaw the queue */ |
| pcdev->frozen = 0; |
| spin_lock_irq(&pcdev->lock); |
| sh_mobile_ceu_capture(pcdev); |
| spin_unlock_irq(&pcdev->lock); |
| /* Start the client */ |
| ret = v4l2_subdev_call(sd, video, s_stream, 1); |
| return ret; |
| } |
| |
| static __poll_t sh_mobile_ceu_poll(struct file *file, poll_table *pt) |
| { |
| struct soc_camera_device *icd = file->private_data; |
| |
| return vb2_poll(&icd->vb2_vidq, file, pt); |
| } |
| |
| static int sh_mobile_ceu_querycap(struct soc_camera_host *ici, |
| struct v4l2_capability *cap) |
| { |
| strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card)); |
| strlcpy(cap->driver, "sh_mobile_ceu", sizeof(cap->driver)); |
| strlcpy(cap->bus_info, "platform:sh_mobile_ceu", sizeof(cap->bus_info)); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q, |
| struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_MMAP | VB2_USERPTR; |
| q->drv_priv = icd; |
| q->ops = &sh_mobile_ceu_videobuf_ops; |
| q->mem_ops = &vb2_dma_contig_memops; |
| q->buf_struct_size = sizeof(struct sh_mobile_ceu_buffer); |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->lock = &ici->host_lock; |
| q->dev = ici->v4l2_dev.dev; |
| |
| return vb2_queue_init(q); |
| } |
| |
| static struct soc_camera_host_ops sh_mobile_ceu_host_ops = { |
| .owner = THIS_MODULE, |
| .add = sh_mobile_ceu_add_device, |
| .remove = sh_mobile_ceu_remove_device, |
| .clock_start = sh_mobile_ceu_clock_start, |
| .clock_stop = sh_mobile_ceu_clock_stop, |
| .get_formats = sh_mobile_ceu_get_formats, |
| .put_formats = sh_mobile_ceu_put_formats, |
| .get_selection = sh_mobile_ceu_get_selection, |
| .set_selection = sh_mobile_ceu_set_selection, |
| .set_liveselection = sh_mobile_ceu_set_liveselection, |
| .set_fmt = sh_mobile_ceu_set_fmt, |
| .try_fmt = sh_mobile_ceu_try_fmt, |
| .poll = sh_mobile_ceu_poll, |
| .querycap = sh_mobile_ceu_querycap, |
| .set_bus_param = sh_mobile_ceu_set_bus_param, |
| .init_videobuf2 = sh_mobile_ceu_init_videobuf, |
| }; |
| |
| struct bus_wait { |
| struct notifier_block notifier; |
| struct completion completion; |
| struct device *dev; |
| }; |
| |
| static int bus_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct device *dev = data; |
| struct bus_wait *wait = container_of(nb, struct bus_wait, notifier); |
| |
| if (wait->dev != dev) |
| return NOTIFY_DONE; |
| |
| switch (action) { |
| case BUS_NOTIFY_UNBOUND_DRIVER: |
| /* Protect from module unloading */ |
| wait_for_completion(&wait->completion); |
| return NOTIFY_OK; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static int sh_mobile_ceu_probe(struct platform_device *pdev) |
| { |
| struct sh_mobile_ceu_dev *pcdev; |
| struct resource *res; |
| void __iomem *base; |
| unsigned int irq; |
| int err; |
| struct bus_wait wait = { |
| .completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion), |
| .notifier.notifier_call = bus_notify, |
| }; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (!res || (int)irq <= 0) { |
| dev_err(&pdev->dev, "Not enough CEU platform resources.\n"); |
| return -ENODEV; |
| } |
| |
| pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev), GFP_KERNEL); |
| if (!pcdev) { |
| dev_err(&pdev->dev, "Could not allocate pcdev\n"); |
| return -ENOMEM; |
| } |
| |
| INIT_LIST_HEAD(&pcdev->capture); |
| spin_lock_init(&pcdev->lock); |
| init_completion(&pcdev->complete); |
| |
| pcdev->pdata = pdev->dev.platform_data; |
| if (!pcdev->pdata && !pdev->dev.of_node) { |
| dev_err(&pdev->dev, "CEU platform data not set.\n"); |
| return -EINVAL; |
| } |
| |
| /* TODO: implement per-device bus flags */ |
| if (pcdev->pdata) { |
| pcdev->max_width = pcdev->pdata->max_width; |
| pcdev->max_height = pcdev->pdata->max_height; |
| pcdev->flags = pcdev->pdata->flags; |
| } |
| pcdev->field = V4L2_FIELD_NONE; |
| |
| if (!pcdev->max_width) { |
| unsigned int v; |
| err = of_property_read_u32(pdev->dev.of_node, "renesas,max-width", &v); |
| if (!err) |
| pcdev->max_width = v; |
| |
| if (!pcdev->max_width) |
| pcdev->max_width = 2560; |
| } |
| if (!pcdev->max_height) { |
| unsigned int v; |
| err = of_property_read_u32(pdev->dev.of_node, "renesas,max-height", &v); |
| if (!err) |
| pcdev->max_height = v; |
| |
| if (!pcdev->max_height) |
| pcdev->max_height = 1920; |
| } |
| |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| pcdev->irq = irq; |
| pcdev->base = base; |
| pcdev->video_limit = 0; /* only enabled if second resource exists */ |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| err = dma_declare_coherent_memory(&pdev->dev, res->start, |
| res->start, |
| resource_size(res), |
| DMA_MEMORY_EXCLUSIVE); |
| if (err) { |
| dev_err(&pdev->dev, "Unable to declare CEU memory.\n"); |
| return err; |
| } |
| |
| pcdev->video_limit = resource_size(res); |
| } |
| |
| /* request irq */ |
| err = devm_request_irq(&pdev->dev, pcdev->irq, sh_mobile_ceu_irq, |
| 0, dev_name(&pdev->dev), pcdev); |
| if (err) { |
| dev_err(&pdev->dev, "Unable to register CEU interrupt.\n"); |
| goto exit_release_mem; |
| } |
| |
| pm_suspend_ignore_children(&pdev->dev, true); |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_resume(&pdev->dev); |
| |
| pcdev->ici.priv = pcdev; |
| pcdev->ici.v4l2_dev.dev = &pdev->dev; |
| pcdev->ici.nr = pdev->id; |
| pcdev->ici.drv_name = dev_name(&pdev->dev); |
| pcdev->ici.ops = &sh_mobile_ceu_host_ops; |
| pcdev->ici.capabilities = SOCAM_HOST_CAP_STRIDE; |
| |
| if (pcdev->pdata && pcdev->pdata->asd_sizes) { |
| pcdev->ici.asd = pcdev->pdata->asd; |
| pcdev->ici.asd_sizes = pcdev->pdata->asd_sizes; |
| } |
| |
| err = soc_camera_host_register(&pcdev->ici); |
| if (err) |
| goto exit_free_clk; |
| |
| return 0; |
| |
| exit_free_clk: |
| pm_runtime_disable(&pdev->dev); |
| exit_release_mem: |
| if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) |
| dma_release_declared_memory(&pdev->dev); |
| return err; |
| } |
| |
| static int sh_mobile_ceu_remove(struct platform_device *pdev) |
| { |
| struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); |
| |
| soc_camera_host_unregister(soc_host); |
| pm_runtime_disable(&pdev->dev); |
| if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) |
| dma_release_declared_memory(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_runtime_nop(struct device *dev) |
| { |
| /* Runtime PM callback shared between ->runtime_suspend() |
| * and ->runtime_resume(). Simply returns success. |
| * |
| * This driver re-initializes all registers after |
| * pm_runtime_get_sync() anyway so there is no need |
| * to save and restore registers here. |
| */ |
| return 0; |
| } |
| |
| static const struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = { |
| .runtime_suspend = sh_mobile_ceu_runtime_nop, |
| .runtime_resume = sh_mobile_ceu_runtime_nop, |
| }; |
| |
| static const struct of_device_id sh_mobile_ceu_of_match[] = { |
| { .compatible = "renesas,sh-mobile-ceu" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sh_mobile_ceu_of_match); |
| |
| static struct platform_driver sh_mobile_ceu_driver = { |
| .driver = { |
| .name = "sh_mobile_ceu", |
| .pm = &sh_mobile_ceu_dev_pm_ops, |
| .of_match_table = sh_mobile_ceu_of_match, |
| }, |
| .probe = sh_mobile_ceu_probe, |
| .remove = sh_mobile_ceu_remove, |
| }; |
| |
| module_platform_driver(sh_mobile_ceu_driver); |
| |
| MODULE_DESCRIPTION("SuperH Mobile CEU driver"); |
| MODULE_AUTHOR("Magnus Damm"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.1.0"); |
| MODULE_ALIAS("platform:sh_mobile_ceu"); |