| menuconfig SND_FIREWIRE | |
| bool "FireWire sound devices" | |
| depends on FIREWIRE | |
| default y | |
| help | |
| Support for IEEE-1394/FireWire/iLink sound devices. | |
| if SND_FIREWIRE && FIREWIRE | |
| config SND_FIREWIRE_LIB | |
| tristate | |
| select SND_PCM | |
| select SND_RAWMIDI | |
| config SND_DICE | |
| tristate "DICE-based DACs (EXPERIMENTAL)" | |
| select SND_HWDEP | |
| select SND_FIREWIRE_LIB | |
| help | |
| Say Y here to include support for many DACs based on the DICE | |
| chip family (DICE-II/Jr/Mini) from TC Applied Technologies. | |
| At the moment, this driver supports playback only. If you | |
| want to use devices that support capturing, use FFADO instead. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-dice. | |
| config SND_FIREWIRE_SPEAKERS | |
| tristate "FireWire speakers" | |
| select SND_FIREWIRE_LIB | |
| help | |
| Say Y here to include support for the Griffin FireWave Surround | |
| and the LaCie FireWire Speakers. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-firewire-speakers. | |
| config SND_ISIGHT | |
| tristate "Apple iSight microphone" | |
| select SND_FIREWIRE_LIB | |
| help | |
| Say Y here to include support for the front and rear microphones | |
| of the Apple iSight web camera. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-isight. | |
| config SND_SCS1X | |
| tristate "Stanton Control System 1 MIDI" | |
| select SND_FIREWIRE_LIB | |
| help | |
| Say Y here to include support for the MIDI ports of the Stanton | |
| SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled | |
| by FFADO.) | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-scs1x. | |
| config SND_FIREWORKS | |
| tristate "Echo Fireworks board module support" | |
| select SND_FIREWIRE_LIB | |
| select SND_HWDEP | |
| help | |
| Say Y here to include support for FireWire devices based | |
| on Echo Digital Audio Fireworks board: | |
| * Mackie Onyx 400F/1200F | |
| * Echo AudioFire12/8(until 2009 July) | |
| * Echo AudioFire2/4/Pre8/8(since 2009 July) | |
| * Echo Fireworks 8/HDMI | |
| * Gibson Robot Interface Pack/GoldTop | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-fireworks. | |
| config SND_BEBOB | |
| tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware" | |
| select SND_FIREWIRE_LIB | |
| select SND_HWDEP | |
| help | |
| Say Y here to include support for FireWire devices based | |
| on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware: | |
| * Edirol FA-66/FA-101 | |
| * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 | |
| * BridgeCo RDAudio1/Audio5 | |
| * Mackie Onyx 1220/1620/1640 (FireWire I/O Card) | |
| * Mackie d.2 (FireWire Option) | |
| * Stanton FinalScratch 2 (ScratchAmp) | |
| * Tascam IF-FW/DM | |
| * Behringer XENIX UFX 1204/1604 | |
| * Behringer Digital Mixer X32 series (X-UF Card) | |
| * Apogee Rosetta 200/400 (X-FireWire card) | |
| * Apogee DA/AD/DD-16X (X-FireWire card) | |
| * Apogee Ensemble | |
| * ESI QuataFire 610 | |
| * AcousticReality eARMasterOne | |
| * CME MatrixKFW | |
| * Phonic Helix Board 12 MkII/18 MkII/24 MkII | |
| * Phonic Helix Board 12 Universal/18 Universal/24 Universal | |
| * Lynx Aurora 8/16 (LT-FW) | |
| * ICON FireXon | |
| * PrismSound Orpheus/ADA-8XR | |
| * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW | |
| * TerraTec EWS MIC2/EWS MIC8 | |
| * TerraTec Aureon 7.1 FireWire | |
| * Yamaha GO44/GO46 | |
| * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO | |
| * M-Audio FireWire410/AudioPhile/Solo | |
| * M-Audio Ozonic/NRV10/ProfireLightBridge | |
| * M-Audio FireWire 1814/ProjectMix IO | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-bebob. | |
| endif # SND_FIREWIRE |