| /* | |
| * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. | |
| * | |
| * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) | |
| * | |
| * Based on the dvb-usb-framework code and the | |
| * original Terratec Cinergy T2 driver by: | |
| * | |
| * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and | |
| * Holger Waechtler <holger@qanu.de> | |
| * | |
| * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| */ | |
| #include "cinergyT2.h" | |
| /* debug */ | |
| int dvb_usb_cinergyt2_debug; | |
| module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " | |
| "(or-able))."); | |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | |
| struct cinergyt2_state { | |
| u8 rc_counter; | |
| }; | |
| /* We are missing a release hook with usb_device data */ | |
| static struct dvb_usb_device *cinergyt2_usb_device; | |
| static struct dvb_usb_device_properties cinergyt2_properties; | |
| static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) | |
| { | |
| char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; | |
| char result[64]; | |
| return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, | |
| sizeof(result), 0); | |
| } | |
| static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) | |
| { | |
| char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; | |
| char state[3]; | |
| return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); | |
| } | |
| static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) | |
| { | |
| char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; | |
| char state[3]; | |
| int ret; | |
| adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); | |
| ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, | |
| sizeof(state), 0); | |
| if (ret < 0) { | |
| deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " | |
| "state info\n"); | |
| } | |
| /* Copy this pointer as we are gonna need it in the release phase */ | |
| cinergyt2_usb_device = adap->dev; | |
| return 0; | |
| } | |
| static struct rc_map_table rc_map_cinergyt2_table[] = { | |
| { 0x0401, KEY_POWER }, | |
| { 0x0402, KEY_1 }, | |
| { 0x0403, KEY_2 }, | |
| { 0x0404, KEY_3 }, | |
| { 0x0405, KEY_4 }, | |
| { 0x0406, KEY_5 }, | |
| { 0x0407, KEY_6 }, | |
| { 0x0408, KEY_7 }, | |
| { 0x0409, KEY_8 }, | |
| { 0x040a, KEY_9 }, | |
| { 0x040c, KEY_0 }, | |
| { 0x040b, KEY_VIDEO }, | |
| { 0x040d, KEY_REFRESH }, | |
| { 0x040e, KEY_SELECT }, | |
| { 0x040f, KEY_EPG }, | |
| { 0x0410, KEY_UP }, | |
| { 0x0414, KEY_DOWN }, | |
| { 0x0411, KEY_LEFT }, | |
| { 0x0413, KEY_RIGHT }, | |
| { 0x0412, KEY_OK }, | |
| { 0x0415, KEY_TEXT }, | |
| { 0x0416, KEY_INFO }, | |
| { 0x0417, KEY_RED }, | |
| { 0x0418, KEY_GREEN }, | |
| { 0x0419, KEY_YELLOW }, | |
| { 0x041a, KEY_BLUE }, | |
| { 0x041c, KEY_VOLUMEUP }, | |
| { 0x041e, KEY_VOLUMEDOWN }, | |
| { 0x041d, KEY_MUTE }, | |
| { 0x041b, KEY_CHANNELUP }, | |
| { 0x041f, KEY_CHANNELDOWN }, | |
| { 0x0440, KEY_PAUSE }, | |
| { 0x044c, KEY_PLAY }, | |
| { 0x0458, KEY_RECORD }, | |
| { 0x0454, KEY_PREVIOUS }, | |
| { 0x0448, KEY_STOP }, | |
| { 0x045c, KEY_NEXT } | |
| }; | |
| /* Number of keypresses to ignore before detect repeating */ | |
| #define RC_REPEAT_DELAY 3 | |
| static int repeatable_keys[] = { | |
| KEY_UP, | |
| KEY_DOWN, | |
| KEY_LEFT, | |
| KEY_RIGHT, | |
| KEY_VOLUMEUP, | |
| KEY_VOLUMEDOWN, | |
| KEY_CHANNELUP, | |
| KEY_CHANNELDOWN | |
| }; | |
| static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) | |
| { | |
| struct cinergyt2_state *st = d->priv; | |
| u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; | |
| int i; | |
| *state = REMOTE_NO_KEY_PRESSED; | |
| dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); | |
| if (key[4] == 0xff) { | |
| /* key repeat */ | |
| st->rc_counter++; | |
| if (st->rc_counter > RC_REPEAT_DELAY) { | |
| for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { | |
| if (d->last_event == repeatable_keys[i]) { | |
| *state = REMOTE_KEY_REPEAT; | |
| *event = d->last_event; | |
| deb_rc("repeat key, event %x\n", | |
| *event); | |
| return 0; | |
| } | |
| } | |
| deb_rc("repeated key (non repeatable)\n"); | |
| } | |
| return 0; | |
| } | |
| /* hack to pass checksum on the custom field */ | |
| key[2] = ~key[1]; | |
| dvb_usb_nec_rc_key_to_event(d, key, event, state); | |
| if (key[0] != 0) { | |
| if (*event != d->last_event) | |
| st->rc_counter = 0; | |
| deb_rc("key: %*ph\n", 5, key); | |
| } | |
| return 0; | |
| } | |
| static int cinergyt2_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| return dvb_usb_device_init(intf, &cinergyt2_properties, | |
| THIS_MODULE, NULL, adapter_nr); | |
| } | |
| static struct usb_device_id cinergyt2_usb_table[] = { | |
| { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); | |
| static struct dvb_usb_device_properties cinergyt2_properties = { | |
| .size_of_priv = sizeof(struct cinergyt2_state), | |
| .num_adapters = 1, | |
| .adapter = { | |
| { | |
| .num_frontends = 1, | |
| .fe = {{ | |
| .streaming_ctrl = cinergyt2_streaming_ctrl, | |
| .frontend_attach = cinergyt2_frontend_attach, | |
| /* parameter for the MPEG2-data transfer */ | |
| .stream = { | |
| .type = USB_BULK, | |
| .count = 5, | |
| .endpoint = 0x02, | |
| .u = { | |
| .bulk = { | |
| .buffersize = 512, | |
| } | |
| } | |
| }, | |
| }}, | |
| } | |
| }, | |
| .power_ctrl = cinergyt2_power_ctrl, | |
| .rc.legacy = { | |
| .rc_interval = 50, | |
| .rc_map_table = rc_map_cinergyt2_table, | |
| .rc_map_size = ARRAY_SIZE(rc_map_cinergyt2_table), | |
| .rc_query = cinergyt2_rc_query, | |
| }, | |
| .generic_bulk_ctrl_endpoint = 1, | |
| .num_device_descs = 1, | |
| .devices = { | |
| { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", | |
| .cold_ids = {NULL}, | |
| .warm_ids = { &cinergyt2_usb_table[0], NULL }, | |
| }, | |
| { NULL }, | |
| } | |
| }; | |
| static struct usb_driver cinergyt2_driver = { | |
| .name = "cinergyT2", | |
| .probe = cinergyt2_usb_probe, | |
| .disconnect = dvb_usb_device_exit, | |
| .id_table = cinergyt2_usb_table | |
| }; | |
| module_usb_driver(cinergyt2_driver); | |
| MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Tomi Orava"); |