| /* | |
| * arch/powerpc/sysdev/qe_lib/qe_ic.h | |
| * | |
| * QUICC ENGINE Interrupt Controller Header | |
| * | |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. | |
| * | |
| * Author: Li Yang <leoli@freescale.com> | |
| * Based on code from Shlomi Gridish <gridish@freescale.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #ifndef _POWERPC_SYSDEV_QE_IC_H | |
| #define _POWERPC_SYSDEV_QE_IC_H | |
| #include <asm/qe_ic.h> | |
| #define NR_QE_IC_INTS 64 | |
| /* QE IC registers offset */ | |
| #define QEIC_CICR 0x00 | |
| #define QEIC_CIVEC 0x04 | |
| #define QEIC_CRIPNR 0x08 | |
| #define QEIC_CIPNR 0x0c | |
| #define QEIC_CIPXCC 0x10 | |
| #define QEIC_CIPYCC 0x14 | |
| #define QEIC_CIPWCC 0x18 | |
| #define QEIC_CIPZCC 0x1c | |
| #define QEIC_CIMR 0x20 | |
| #define QEIC_CRIMR 0x24 | |
| #define QEIC_CICNR 0x28 | |
| #define QEIC_CIPRTA 0x30 | |
| #define QEIC_CIPRTB 0x34 | |
| #define QEIC_CRICR 0x3c | |
| #define QEIC_CHIVEC 0x60 | |
| /* Interrupt priority registers */ | |
| #define CIPCC_SHIFT_PRI0 29 | |
| #define CIPCC_SHIFT_PRI1 26 | |
| #define CIPCC_SHIFT_PRI2 23 | |
| #define CIPCC_SHIFT_PRI3 20 | |
| #define CIPCC_SHIFT_PRI4 13 | |
| #define CIPCC_SHIFT_PRI5 10 | |
| #define CIPCC_SHIFT_PRI6 7 | |
| #define CIPCC_SHIFT_PRI7 4 | |
| /* CICR priority modes */ | |
| #define CICR_GWCC 0x00040000 | |
| #define CICR_GXCC 0x00020000 | |
| #define CICR_GYCC 0x00010000 | |
| #define CICR_GZCC 0x00080000 | |
| #define CICR_GRTA 0x00200000 | |
| #define CICR_GRTB 0x00400000 | |
| #define CICR_HPIT_SHIFT 8 | |
| #define CICR_HPIT_MASK 0x00000300 | |
| #define CICR_HP_SHIFT 24 | |
| #define CICR_HP_MASK 0x3f000000 | |
| /* CICNR */ | |
| #define CICNR_WCC1T_SHIFT 20 | |
| #define CICNR_ZCC1T_SHIFT 28 | |
| #define CICNR_YCC1T_SHIFT 12 | |
| #define CICNR_XCC1T_SHIFT 4 | |
| /* CRICR */ | |
| #define CRICR_RTA1T_SHIFT 20 | |
| #define CRICR_RTB1T_SHIFT 28 | |
| /* Signal indicator */ | |
| #define SIGNAL_MASK 3 | |
| #define SIGNAL_HIGH 2 | |
| #define SIGNAL_LOW 0 | |
| struct qe_ic { | |
| /* Control registers offset */ | |
| volatile u32 __iomem *regs; | |
| /* The remapper for this QEIC */ | |
| struct irq_domain *irqhost; | |
| /* The "linux" controller struct */ | |
| struct irq_chip hc_irq; | |
| /* VIRQ numbers of QE high/low irqs */ | |
| unsigned int virq_high; | |
| unsigned int virq_low; | |
| }; | |
| /* | |
| * QE interrupt controller internal structure | |
| */ | |
| struct qe_ic_info { | |
| u32 mask; /* location of this source at the QIMR register. */ | |
| u32 mask_reg; /* Mask register offset */ | |
| u8 pri_code; /* for grouped interrupts sources - the interrupt | |
| code as appears at the group priority register */ | |
| u32 pri_reg; /* Group priority register offset */ | |
| }; | |
| #endif /* _POWERPC_SYSDEV_QE_IC_H */ |