| /* | |
| * Linux/Meta general interrupt handling code | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/irqchip/metag-ext.h> | |
| #include <linux/irqchip/metag.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/ratelimit.h> | |
| #include <asm/core_reg.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/uaccess.h> | |
| #ifdef CONFIG_4KSTACKS | |
| union irq_ctx { | |
| struct thread_info tinfo; | |
| u32 stack[THREAD_SIZE/sizeof(u32)]; | |
| }; | |
| static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; | |
| static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; | |
| #endif | |
| static struct irq_domain *root_domain; | |
| static unsigned int startup_meta_irq(struct irq_data *data) | |
| { | |
| tbi_startup_interrupt(data->hwirq); | |
| return 0; | |
| } | |
| static void shutdown_meta_irq(struct irq_data *data) | |
| { | |
| tbi_shutdown_interrupt(data->hwirq); | |
| } | |
| void do_IRQ(int irq, struct pt_regs *regs) | |
| { | |
| struct pt_regs *old_regs = set_irq_regs(regs); | |
| #ifdef CONFIG_4KSTACKS | |
| struct irq_desc *desc; | |
| union irq_ctx *curctx, *irqctx; | |
| u32 *isp; | |
| #endif | |
| irq_enter(); | |
| irq = irq_linear_revmap(root_domain, irq); | |
| #ifdef CONFIG_DEBUG_STACKOVERFLOW | |
| /* Debugging check for stack overflow: is there less than 1KB free? */ | |
| { | |
| unsigned long sp; | |
| sp = __core_reg_get(A0StP); | |
| sp &= THREAD_SIZE - 1; | |
| if (unlikely(sp > (THREAD_SIZE - 1024))) | |
| pr_err("Stack overflow in do_IRQ: %ld\n", sp); | |
| } | |
| #endif | |
| #ifdef CONFIG_4KSTACKS | |
| curctx = (union irq_ctx *) current_thread_info(); | |
| irqctx = hardirq_ctx[smp_processor_id()]; | |
| /* | |
| * this is where we switch to the IRQ stack. However, if we are | |
| * already using the IRQ stack (because we interrupted a hardirq | |
| * handler) we can't do that and just have to keep using the | |
| * current stack (which is the irq stack already after all) | |
| */ | |
| if (curctx != irqctx) { | |
| /* build the stack frame on the IRQ stack */ | |
| isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info)); | |
| irqctx->tinfo.task = curctx->tinfo.task; | |
| /* | |
| * Copy the softirq bits in preempt_count so that the | |
| * softirq checks work in the hardirq context. | |
| */ | |
| irqctx->tinfo.preempt_count = | |
| (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | | |
| (curctx->tinfo.preempt_count & SOFTIRQ_MASK); | |
| desc = irq_to_desc(irq); | |
| asm volatile ( | |
| "MOV D0.5,%0\n" | |
| "MOV D1Ar1,%1\n" | |
| "MOV D1RtP,%2\n" | |
| "MOV D0Ar2,%3\n" | |
| "SWAP A0StP,D0.5\n" | |
| "SWAP PC,D1RtP\n" | |
| "MOV A0StP,D0.5\n" | |
| : | |
| : "r" (isp), "r" (irq), "r" (desc->handle_irq), | |
| "r" (desc) | |
| : "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4", | |
| "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP", | |
| "D0.5" | |
| ); | |
| } else | |
| #endif | |
| generic_handle_irq(irq); | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| } | |
| #ifdef CONFIG_4KSTACKS | |
| static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; | |
| static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; | |
| /* | |
| * allocate per-cpu stacks for hardirq and for softirq processing | |
| */ | |
| void irq_ctx_init(int cpu) | |
| { | |
| union irq_ctx *irqctx; | |
| if (hardirq_ctx[cpu]) | |
| return; | |
| irqctx = (union irq_ctx *) &hardirq_stack[cpu * THREAD_SIZE]; | |
| irqctx->tinfo.task = NULL; | |
| irqctx->tinfo.exec_domain = NULL; | |
| irqctx->tinfo.cpu = cpu; | |
| irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; | |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); | |
| hardirq_ctx[cpu] = irqctx; | |
| irqctx = (union irq_ctx *) &softirq_stack[cpu * THREAD_SIZE]; | |
| irqctx->tinfo.task = NULL; | |
| irqctx->tinfo.exec_domain = NULL; | |
| irqctx->tinfo.cpu = cpu; | |
| irqctx->tinfo.preempt_count = 0; | |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); | |
| softirq_ctx[cpu] = irqctx; | |
| pr_info("CPU %u irqstacks, hard=%p soft=%p\n", | |
| cpu, hardirq_ctx[cpu], softirq_ctx[cpu]); | |
| } | |
| void irq_ctx_exit(int cpu) | |
| { | |
| hardirq_ctx[smp_processor_id()] = NULL; | |
| } | |
| extern asmlinkage void __do_softirq(void); | |
| void do_softirq_own_stack(void) | |
| { | |
| struct thread_info *curctx; | |
| union irq_ctx *irqctx; | |
| u32 *isp; | |
| curctx = current_thread_info(); | |
| irqctx = softirq_ctx[smp_processor_id()]; | |
| irqctx->tinfo.task = curctx->task; | |
| /* build the stack frame on the softirq stack */ | |
| isp = (u32 *) ((char *)irqctx + sizeof(struct thread_info)); | |
| asm volatile ( | |
| "MOV D0.5,%0\n" | |
| "SWAP A0StP,D0.5\n" | |
| "CALLR D1RtP,___do_softirq\n" | |
| "MOV A0StP,D0.5\n" | |
| : | |
| : "r" (isp) | |
| : "memory", "cc", "D1Ar1", "D0Ar2", "D1Ar3", "D0Ar4", | |
| "D1Ar5", "D0Ar6", "D0Re0", "D1Re0", "D0.4", "D1RtP", | |
| "D0.5" | |
| ); | |
| } | |
| #endif | |
| static struct irq_chip meta_irq_type = { | |
| .name = "META-IRQ", | |
| .irq_startup = startup_meta_irq, | |
| .irq_shutdown = shutdown_meta_irq, | |
| }; | |
| /** | |
| * tbisig_map() - Map a TBI signal number to a virtual IRQ number. | |
| * @hw: Number of the TBI signal. Must be in range. | |
| * | |
| * Returns: The virtual IRQ number of the TBI signal number IRQ specified by | |
| * @hw. | |
| */ | |
| int tbisig_map(unsigned int hw) | |
| { | |
| return irq_create_mapping(root_domain, hw); | |
| } | |
| /** | |
| * metag_tbisig_map() - map a tbi signal to a Linux virtual IRQ number | |
| * @d: root irq domain | |
| * @irq: virtual irq number | |
| * @hw: hardware irq number (TBI signal number) | |
| * | |
| * This sets up a virtual irq for a specified TBI signal number. | |
| */ | |
| static int metag_tbisig_map(struct irq_domain *d, unsigned int irq, | |
| irq_hw_number_t hw) | |
| { | |
| #ifdef CONFIG_SMP | |
| irq_set_chip_and_handler(irq, &meta_irq_type, handle_percpu_irq); | |
| #else | |
| irq_set_chip_and_handler(irq, &meta_irq_type, handle_simple_irq); | |
| #endif | |
| return 0; | |
| } | |
| static const struct irq_domain_ops metag_tbisig_domain_ops = { | |
| .map = metag_tbisig_map, | |
| }; | |
| /* | |
| * void init_IRQ(void) | |
| * | |
| * Parameters: None | |
| * | |
| * Returns: Nothing | |
| * | |
| * This function should be called during kernel startup to initialize | |
| * the IRQ handling routines. | |
| */ | |
| void __init init_IRQ(void) | |
| { | |
| root_domain = irq_domain_add_linear(NULL, 32, | |
| &metag_tbisig_domain_ops, NULL); | |
| if (unlikely(!root_domain)) | |
| panic("init_IRQ: cannot add root IRQ domain"); | |
| irq_ctx_init(smp_processor_id()); | |
| init_internal_IRQ(); | |
| init_external_IRQ(); | |
| if (machine_desc->init_irq) | |
| machine_desc->init_irq(); | |
| } | |
| int __init arch_probe_nr_irqs(void) | |
| { | |
| if (machine_desc->nr_irqs) | |
| nr_irqs = machine_desc->nr_irqs; | |
| return 0; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* | |
| * The CPU has been marked offline. Migrate IRQs off this CPU. If | |
| * the affinity settings do not allow other CPUs, force them onto any | |
| * available CPU. | |
| */ | |
| void migrate_irqs(void) | |
| { | |
| unsigned int i, cpu = smp_processor_id(); | |
| for_each_active_irq(i) { | |
| struct irq_data *data = irq_get_irq_data(i); | |
| unsigned int newcpu; | |
| if (irqd_is_per_cpu(data)) | |
| continue; | |
| if (!cpumask_test_cpu(cpu, data->affinity)) | |
| continue; | |
| newcpu = cpumask_any_and(data->affinity, cpu_online_mask); | |
| if (newcpu >= nr_cpu_ids) { | |
| pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n", | |
| i, cpu); | |
| cpumask_setall(data->affinity); | |
| } | |
| irq_set_affinity(i, data->affinity); | |
| } | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ |