| CS4265 audio CODEC | |
| This device supports I2C only. | |
| Required properties: | |
| - compatible : "cirrus,cs4265" | |
| - reg : the I2C address of the device for I2C. The I2C address depends on | |
| the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. | |
| If it is low, the i2c address is 0x4e. | |
| Optional properties: | |
| - reset-gpios : a GPIO spec for the reset pin. If specified, it will be | |
| deasserted before communication to the codec starts. | |
| Examples: | |
| codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ | |
| compatible = "cirrus,cs4265"; | |
| reg = <0x4f>; | |
| }; | |
| codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ | |
| compatible = "cirrus,cs4265"; | |
| reg = <0x4e>; | |
| }; |