| /* |
| * arch/powerpc/platforms/83xx/mpc834x_mds.c |
| * |
| * MPC834x MDS board specific routines |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/system.h> |
| #include <asm/atomic.h> |
| #include <asm/time.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/udbg.h> |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| |
| #include "mpc83xx.h" |
| |
| #define BCSR5_INT_USB 0x02 |
| static int mpc834xemds_usb_cfg(void) |
| { |
| struct device_node *np; |
| void __iomem *bcsr_regs = NULL; |
| u8 bcsr5; |
| |
| mpc834x_usb_cfg(); |
| /* Map BCSR area */ |
| np = of_find_node_by_name(NULL, "bcsr"); |
| if (np) { |
| struct resource res; |
| |
| of_address_to_resource(np, 0, &res); |
| bcsr_regs = ioremap(res.start, resource_size(&res)); |
| of_node_put(np); |
| } |
| if (!bcsr_regs) |
| return -1; |
| |
| /* |
| * if Processor Board is plugged into PIB board, |
| * force to use the PHY on Processor Board |
| */ |
| bcsr5 = in_8(bcsr_regs + 5); |
| if (!(bcsr5 & BCSR5_INT_USB)) |
| out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); |
| iounmap(bcsr_regs); |
| return 0; |
| } |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init mpc834x_mds_setup_arch(void) |
| { |
| #ifdef CONFIG_PCI |
| struct device_node *np; |
| #endif |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc834x_mds_setup_arch()", 0); |
| |
| #ifdef CONFIG_PCI |
| for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") |
| mpc83xx_add_bridge(np); |
| #endif |
| |
| mpc834xemds_usb_cfg(); |
| } |
| |
| static void __init mpc834x_mds_init_IRQ(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_node_by_type(NULL, "ipic"); |
| if (!np) |
| return; |
| |
| ipic_init(np, 0); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| ipic_set_default_priority(); |
| } |
| |
| static struct of_device_id mpc834x_ids[] = { |
| { .type = "soc", }, |
| { .compatible = "soc", }, |
| { .compatible = "simple-bus", }, |
| { .compatible = "gianfar", }, |
| {}, |
| }; |
| |
| static int __init mpc834x_declare_of_platform_devices(void) |
| { |
| of_platform_bus_probe(NULL, mpc834x_ids, NULL); |
| return 0; |
| } |
| machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices); |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init mpc834x_mds_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| return of_flat_dt_is_compatible(root, "MPC834xMDS"); |
| } |
| |
| define_machine(mpc834x_mds) { |
| .name = "MPC834x MDS", |
| .probe = mpc834x_mds_probe, |
| .setup_arch = mpc834x_mds_setup_arch, |
| .init_IRQ = mpc834x_mds_init_IRQ, |
| .get_irq = ipic_get_irq, |
| .restart = mpc83xx_restart, |
| .time_init = mpc83xx_time_init, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |