| /* USB OTG (On The Go) defines */ | |
| /* | |
| * | |
| * These APIs may be used between USB controllers. USB device drivers | |
| * (for either host or peripheral roles) don't use these calls; they | |
| * continue to use just usb_device and usb_gadget. | |
| */ | |
| #ifndef __LINUX_USB_PHY_H | |
| #define __LINUX_USB_PHY_H | |
| #include <linux/notifier.h> | |
| enum usb_phy_events { | |
| USB_EVENT_NONE, /* no events or cable disconnected */ | |
| USB_EVENT_VBUS, /* vbus valid event */ | |
| USB_EVENT_ID, /* id was grounded */ | |
| USB_EVENT_CHARGER, /* usb dedicated charger */ | |
| USB_EVENT_ENUMERATED, /* gadget driver enumerated */ | |
| }; | |
| /* associate a type with PHY */ | |
| enum usb_phy_type { | |
| USB_PHY_TYPE_UNDEFINED, | |
| USB_PHY_TYPE_USB2, | |
| USB_PHY_TYPE_USB3, | |
| }; | |
| /* OTG defines lots of enumeration states before device reset */ | |
| enum usb_otg_state { | |
| OTG_STATE_UNDEFINED = 0, | |
| /* single-role peripheral, and dual-role default-b */ | |
| OTG_STATE_B_IDLE, | |
| OTG_STATE_B_SRP_INIT, | |
| OTG_STATE_B_PERIPHERAL, | |
| /* extra dual-role default-b states */ | |
| OTG_STATE_B_WAIT_ACON, | |
| OTG_STATE_B_HOST, | |
| /* dual-role default-a */ | |
| OTG_STATE_A_IDLE, | |
| OTG_STATE_A_WAIT_VRISE, | |
| OTG_STATE_A_WAIT_BCON, | |
| OTG_STATE_A_HOST, | |
| OTG_STATE_A_SUSPEND, | |
| OTG_STATE_A_PERIPHERAL, | |
| OTG_STATE_A_WAIT_VFALL, | |
| OTG_STATE_A_VBUS_ERR, | |
| }; | |
| struct usb_phy; | |
| struct usb_otg; | |
| /* for transceivers connected thru an ULPI interface, the user must | |
| * provide access ops | |
| */ | |
| struct usb_phy_io_ops { | |
| int (*read)(struct usb_phy *x, u32 reg); | |
| int (*write)(struct usb_phy *x, u32 val, u32 reg); | |
| }; | |
| struct usb_phy { | |
| struct device *dev; | |
| const char *label; | |
| unsigned int flags; | |
| enum usb_phy_type type; | |
| enum usb_otg_state state; | |
| enum usb_phy_events last_event; | |
| struct usb_otg *otg; | |
| struct device *io_dev; | |
| struct usb_phy_io_ops *io_ops; | |
| void __iomem *io_priv; | |
| /* for notification of usb_phy_events */ | |
| struct atomic_notifier_head notifier; | |
| /* to pass extra port status to the root hub */ | |
| u16 port_status; | |
| u16 port_change; | |
| /* to support controllers that have multiple transceivers */ | |
| struct list_head head; | |
| /* initialize/shutdown the OTG controller */ | |
| int (*init)(struct usb_phy *x); | |
| void (*shutdown)(struct usb_phy *x); | |
| /* effective for B devices, ignored for A-peripheral */ | |
| int (*set_power)(struct usb_phy *x, | |
| unsigned mA); | |
| /* for non-OTG B devices: set transceiver into suspend mode */ | |
| int (*set_suspend)(struct usb_phy *x, | |
| int suspend); | |
| /* notify phy connect status change */ | |
| int (*notify_connect)(struct usb_phy *x, int port); | |
| int (*notify_disconnect)(struct usb_phy *x, int port); | |
| }; | |
| /* for board-specific init logic */ | |
| extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); | |
| extern void usb_remove_phy(struct usb_phy *); | |
| /* helpers for direct access thru low-level io interface */ | |
| static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) | |
| { | |
| if (x->io_ops && x->io_ops->read) | |
| return x->io_ops->read(x, reg); | |
| return -EINVAL; | |
| } | |
| static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) | |
| { | |
| if (x->io_ops && x->io_ops->write) | |
| return x->io_ops->write(x, val, reg); | |
| return -EINVAL; | |
| } | |
| static inline int | |
| usb_phy_init(struct usb_phy *x) | |
| { | |
| if (x->init) | |
| return x->init(x); | |
| return 0; | |
| } | |
| static inline void | |
| usb_phy_shutdown(struct usb_phy *x) | |
| { | |
| if (x->shutdown) | |
| x->shutdown(x); | |
| } | |
| /* for usb host and peripheral controller drivers */ | |
| #ifdef CONFIG_USB_OTG_UTILS | |
| extern struct usb_phy *usb_get_phy(enum usb_phy_type type); | |
| extern struct usb_phy *devm_usb_get_phy(struct device *dev, | |
| enum usb_phy_type type); | |
| extern void usb_put_phy(struct usb_phy *); | |
| extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); | |
| #else | |
| static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) | |
| { | |
| return NULL; | |
| } | |
| static inline struct usb_phy *devm_usb_get_phy(struct device *dev, | |
| enum usb_phy_type type) | |
| { | |
| return NULL; | |
| } | |
| static inline void usb_put_phy(struct usb_phy *x) | |
| { | |
| } | |
| static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) | |
| { | |
| } | |
| #endif | |
| static inline int | |
| usb_phy_set_power(struct usb_phy *x, unsigned mA) | |
| { | |
| if (x && x->set_power) | |
| return x->set_power(x, mA); | |
| return 0; | |
| } | |
| /* Context: can sleep */ | |
| static inline int | |
| usb_phy_set_suspend(struct usb_phy *x, int suspend) | |
| { | |
| if (x->set_suspend != NULL) | |
| return x->set_suspend(x, suspend); | |
| else | |
| return 0; | |
| } | |
| static inline int | |
| usb_phy_notify_connect(struct usb_phy *x, int port) | |
| { | |
| if (x->notify_connect) | |
| return x->notify_connect(x, port); | |
| else | |
| return 0; | |
| } | |
| static inline int | |
| usb_phy_notify_disconnect(struct usb_phy *x, int port) | |
| { | |
| if (x->notify_disconnect) | |
| return x->notify_disconnect(x, port); | |
| else | |
| return 0; | |
| } | |
| /* notifiers */ | |
| static inline int | |
| usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) | |
| { | |
| return atomic_notifier_chain_register(&x->notifier, nb); | |
| } | |
| static inline void | |
| usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) | |
| { | |
| atomic_notifier_chain_unregister(&x->notifier, nb); | |
| } | |
| static inline const char *usb_phy_type_string(enum usb_phy_type type) | |
| { | |
| switch (type) { | |
| case USB_PHY_TYPE_USB2: | |
| return "USB2 PHY"; | |
| case USB_PHY_TYPE_USB3: | |
| return "USB3 PHY"; | |
| default: | |
| return "UNKNOWN PHY TYPE"; | |
| } | |
| } | |
| #endif /* __LINUX_USB_PHY_H */ |