| #ifndef _SMBNO_H_ | |
| #define _SMBNO_H_ | |
| /* these define the attribute byte as seen by DOS */ | |
| #define aRONLY (1L<<0) | |
| #define aHIDDEN (1L<<1) | |
| #define aSYSTEM (1L<<2) | |
| #define aVOLID (1L<<3) | |
| #define aDIR (1L<<4) | |
| #define aARCH (1L<<5) | |
| /* error classes */ | |
| #define SUCCESS 0 /* The request was successful. */ | |
| #define ERRDOS 0x01 /* Error is from the core DOS operating system set. */ | |
| #define ERRSRV 0x02 /* Error is generated by the server network file manager.*/ | |
| #define ERRHRD 0x03 /* Error is an hardware error. */ | |
| #define ERRCMD 0xFF /* Command was not in the "SMB" format. */ | |
| /* SMB X/Open error codes for the ERRdos error class */ | |
| #define ERRbadfunc 1 /* Invalid function (or system call) */ | |
| #define ERRbadfile 2 /* File not found (pathname error) */ | |
| #define ERRbadpath 3 /* Directory not found */ | |
| #define ERRnofids 4 /* Too many open files */ | |
| #define ERRnoaccess 5 /* Access denied */ | |
| #define ERRbadfid 6 /* Invalid fid */ | |
| #define ERRbadmcb 7 /* Memory control blocks destroyed */ | |
| #define ERRnomem 8 /* Out of memory */ | |
| #define ERRbadmem 9 /* Invalid memory block address */ | |
| #define ERRbadenv 10 /* Invalid environment */ | |
| #define ERRbadformat 11 /* Invalid format */ | |
| #define ERRbadaccess 12 /* Invalid open mode */ | |
| #define ERRbaddata 13 /* Invalid data (only from ioctl call) */ | |
| #define ERRres 14 /* reserved */ | |
| #define ERRbaddrive 15 /* Invalid drive */ | |
| #define ERRremcd 16 /* Attempt to delete current directory */ | |
| #define ERRdiffdevice 17 /* rename/move across different filesystems */ | |
| #define ERRnofiles 18 /* no more files found in file search */ | |
| #define ERRbadshare 32 /* Share mode on file conflict with open mode */ | |
| #define ERRlock 33 /* Lock request conflicts with existing lock */ | |
| #define ERRfilexists 80 /* File in operation already exists */ | |
| #define ERRbadpipe 230 /* Named pipe invalid */ | |
| #define ERRpipebusy 231 /* All instances of pipe are busy */ | |
| #define ERRpipeclosing 232 /* named pipe close in progress */ | |
| #define ERRnotconnected 233 /* No process on other end of named pipe */ | |
| #define ERRmoredata 234 /* More data to be returned */ | |
| #define ERROR_INVALID_PARAMETER 87 | |
| #define ERROR_DISK_FULL 112 | |
| #define ERROR_INVALID_NAME 123 | |
| #define ERROR_DIR_NOT_EMPTY 145 | |
| #define ERROR_NOT_LOCKED 158 | |
| #define ERROR_ALREADY_EXISTS 183 /* see also 80 ? */ | |
| #define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */ | |
| #define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not supported */ | |
| /* Error codes for the ERRSRV class */ | |
| #define ERRerror 1 /* Non specific error code */ | |
| #define ERRbadpw 2 /* Bad password */ | |
| #define ERRbadtype 3 /* reserved */ | |
| #define ERRaccess 4 /* No permissions to do the requested operation */ | |
| #define ERRinvnid 5 /* tid invalid */ | |
| #define ERRinvnetname 6 /* Invalid servername */ | |
| #define ERRinvdevice 7 /* Invalid device */ | |
| #define ERRqfull 49 /* Print queue full */ | |
| #define ERRqtoobig 50 /* Queued item too big */ | |
| #define ERRinvpfid 52 /* Invalid print file in smb_fid */ | |
| #define ERRsmbcmd 64 /* Unrecognised command */ | |
| #define ERRsrverror 65 /* smb server internal error */ | |
| #define ERRfilespecs 67 /* fid and pathname invalid combination */ | |
| #define ERRbadlink 68 /* reserved */ | |
| #define ERRbadpermits 69 /* Access specified for a file is not valid */ | |
| #define ERRbadpid 70 /* reserved */ | |
| #define ERRsetattrmode 71 /* attribute mode invalid */ | |
| #define ERRpaused 81 /* Message server paused */ | |
| #define ERRmsgoff 82 /* Not receiving messages */ | |
| #define ERRnoroom 83 /* No room for message */ | |
| #define ERRrmuns 87 /* too many remote usernames */ | |
| #define ERRtimeout 88 /* operation timed out */ | |
| #define ERRnoresource 89 /* No resources currently available for request. */ | |
| #define ERRtoomanyuids 90 /* too many userids */ | |
| #define ERRbaduid 91 /* bad userid */ | |
| #define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */ | |
| #define ERRuseSTD 251 /* temporarily unable to use raw mode, use std.mode */ | |
| #define ERRcontMPX 252 /* resume MPX mode */ | |
| #define ERRbadPW /* reserved */ | |
| #define ERRnosupport 0xFFFF | |
| /* Error codes for the ERRHRD class */ | |
| #define ERRnowrite 19 /* read only media */ | |
| #define ERRbadunit 20 /* Unknown device */ | |
| #define ERRnotready 21 /* Drive not ready */ | |
| #define ERRbadcmd 22 /* Unknown command */ | |
| #define ERRdata 23 /* Data (CRC) error */ | |
| #define ERRbadreq 24 /* Bad request structure length */ | |
| #define ERRseek 25 | |
| #define ERRbadmedia 26 | |
| #define ERRbadsector 27 | |
| #define ERRnopaper 28 | |
| #define ERRwrite 29 /* write fault */ | |
| #define ERRread 30 /* read fault */ | |
| #define ERRgeneral 31 /* General hardware failure */ | |
| #define ERRwrongdisk 34 | |
| #define ERRFCBunavail 35 | |
| #define ERRsharebufexc 36 /* share buffer exceeded */ | |
| #define ERRdiskfull 39 | |
| /* | |
| * Access modes when opening a file | |
| */ | |
| #define SMB_ACCMASK 0x0003 | |
| #define SMB_O_RDONLY 0x0000 | |
| #define SMB_O_WRONLY 0x0001 | |
| #define SMB_O_RDWR 0x0002 | |
| /* offsets into message for common items */ | |
| #define smb_com 8 | |
| #define smb_rcls 9 | |
| #define smb_reh 10 | |
| #define smb_err 11 | |
| #define smb_flg 13 | |
| #define smb_flg2 14 | |
| #define smb_reb 13 | |
| #define smb_tid 28 | |
| #define smb_pid 30 | |
| #define smb_uid 32 | |
| #define smb_mid 34 | |
| #define smb_wct 36 | |
| #define smb_vwv 37 | |
| #define smb_vwv0 37 | |
| #define smb_vwv1 39 | |
| #define smb_vwv2 41 | |
| #define smb_vwv3 43 | |
| #define smb_vwv4 45 | |
| #define smb_vwv5 47 | |
| #define smb_vwv6 49 | |
| #define smb_vwv7 51 | |
| #define smb_vwv8 53 | |
| #define smb_vwv9 55 | |
| #define smb_vwv10 57 | |
| #define smb_vwv11 59 | |
| #define smb_vwv12 61 | |
| #define smb_vwv13 63 | |
| #define smb_vwv14 65 | |
| /* these are the trans2 sub fields for primary requests */ | |
| #define smb_tpscnt smb_vwv0 | |
| #define smb_tdscnt smb_vwv1 | |
| #define smb_mprcnt smb_vwv2 | |
| #define smb_mdrcnt smb_vwv3 | |
| #define smb_msrcnt smb_vwv4 | |
| #define smb_flags smb_vwv5 | |
| #define smb_timeout smb_vwv6 | |
| #define smb_pscnt smb_vwv9 | |
| #define smb_psoff smb_vwv10 | |
| #define smb_dscnt smb_vwv11 | |
| #define smb_dsoff smb_vwv12 | |
| #define smb_suwcnt smb_vwv13 | |
| #define smb_setup smb_vwv14 | |
| #define smb_setup0 smb_setup | |
| #define smb_setup1 (smb_setup+2) | |
| #define smb_setup2 (smb_setup+4) | |
| /* these are for the secondary requests */ | |
| #define smb_spscnt smb_vwv2 | |
| #define smb_spsoff smb_vwv3 | |
| #define smb_spsdisp smb_vwv4 | |
| #define smb_sdscnt smb_vwv5 | |
| #define smb_sdsoff smb_vwv6 | |
| #define smb_sdsdisp smb_vwv7 | |
| #define smb_sfid smb_vwv8 | |
| /* and these for responses */ | |
| #define smb_tprcnt smb_vwv0 | |
| #define smb_tdrcnt smb_vwv1 | |
| #define smb_prcnt smb_vwv3 | |
| #define smb_proff smb_vwv4 | |
| #define smb_prdisp smb_vwv5 | |
| #define smb_drcnt smb_vwv6 | |
| #define smb_droff smb_vwv7 | |
| #define smb_drdisp smb_vwv8 | |
| /* the complete */ | |
| #define SMBmkdir 0x00 /* create directory */ | |
| #define SMBrmdir 0x01 /* delete directory */ | |
| #define SMBopen 0x02 /* open file */ | |
| #define SMBcreate 0x03 /* create file */ | |
| #define SMBclose 0x04 /* close file */ | |
| #define SMBflush 0x05 /* flush file */ | |
| #define SMBunlink 0x06 /* delete file */ | |
| #define SMBmv 0x07 /* rename file */ | |
| #define SMBgetatr 0x08 /* get file attributes */ | |
| #define SMBsetatr 0x09 /* set file attributes */ | |
| #define SMBread 0x0A /* read from file */ | |
| #define SMBwrite 0x0B /* write to file */ | |
| #define SMBlock 0x0C /* lock byte range */ | |
| #define SMBunlock 0x0D /* unlock byte range */ | |
| #define SMBctemp 0x0E /* create temporary file */ | |
| #define SMBmknew 0x0F /* make new file */ | |
| #define SMBchkpth 0x10 /* check directory path */ | |
| #define SMBexit 0x11 /* process exit */ | |
| #define SMBlseek 0x12 /* seek */ | |
| #define SMBtcon 0x70 /* tree connect */ | |
| #define SMBtconX 0x75 /* tree connect and X*/ | |
| #define SMBtdis 0x71 /* tree disconnect */ | |
| #define SMBnegprot 0x72 /* negotiate protocol */ | |
| #define SMBdskattr 0x80 /* get disk attributes */ | |
| #define SMBsearch 0x81 /* search directory */ | |
| #define SMBsplopen 0xC0 /* open print spool file */ | |
| #define SMBsplwr 0xC1 /* write to print spool file */ | |
| #define SMBsplclose 0xC2 /* close print spool file */ | |
| #define SMBsplretq 0xC3 /* return print queue */ | |
| #define SMBsends 0xD0 /* send single block message */ | |
| #define SMBsendb 0xD1 /* send broadcast message */ | |
| #define SMBfwdname 0xD2 /* forward user name */ | |
| #define SMBcancelf 0xD3 /* cancel forward */ | |
| #define SMBgetmac 0xD4 /* get machine name */ | |
| #define SMBsendstrt 0xD5 /* send start of multi-block message */ | |
| #define SMBsendend 0xD6 /* send end of multi-block message */ | |
| #define SMBsendtxt 0xD7 /* send text of multi-block message */ | |
| /* Core+ protocol */ | |
| #define SMBlockread 0x13 /* Lock a range and read */ | |
| #define SMBwriteunlock 0x14 /* Unlock a range then write */ | |
| #define SMBreadbraw 0x1a /* read a block of data with no smb header */ | |
| #define SMBwritebraw 0x1d /* write a block of data with no smb header */ | |
| #define SMBwritec 0x20 /* secondary write request */ | |
| #define SMBwriteclose 0x2c /* write a file then close it */ | |
| /* dos extended protocol */ | |
| #define SMBreadBraw 0x1A /* read block raw */ | |
| #define SMBreadBmpx 0x1B /* read block multiplexed */ | |
| #define SMBreadBs 0x1C /* read block (secondary response) */ | |
| #define SMBwriteBraw 0x1D /* write block raw */ | |
| #define SMBwriteBmpx 0x1E /* write block multiplexed */ | |
| #define SMBwriteBs 0x1F /* write block (secondary request) */ | |
| #define SMBwriteC 0x20 /* write complete response */ | |
| #define SMBsetattrE 0x22 /* set file attributes expanded */ | |
| #define SMBgetattrE 0x23 /* get file attributes expanded */ | |
| #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */ | |
| #define SMBtrans 0x25 /* transaction - name, bytes in/out */ | |
| #define SMBtranss 0x26 /* transaction (secondary request/response) */ | |
| #define SMBioctl 0x27 /* IOCTL */ | |
| #define SMBioctls 0x28 /* IOCTL (secondary request/response) */ | |
| #define SMBcopy 0x29 /* copy */ | |
| #define SMBmove 0x2A /* move */ | |
| #define SMBecho 0x2B /* echo */ | |
| #define SMBopenX 0x2D /* open and X */ | |
| #define SMBreadX 0x2E /* read and X */ | |
| #define SMBwriteX 0x2F /* write and X */ | |
| #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */ | |
| #define SMBtconX 0x75 /* tree connect and X */ | |
| #define SMBffirst 0x82 /* find first */ | |
| #define SMBfunique 0x83 /* find unique */ | |
| #define SMBfclose 0x84 /* find close */ | |
| #define SMBinvalid 0xFE /* invalid command */ | |
| /* Extended 2.0 protocol */ | |
| #define SMBtrans2 0x32 /* TRANS2 protocol set */ | |
| #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */ | |
| #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */ | |
| #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */ | |
| #define SMBulogoffX 0x74 /* user logoff */ | |
| /* these are the TRANS2 sub commands */ | |
| #define TRANSACT2_OPEN 0 | |
| #define TRANSACT2_FINDFIRST 1 | |
| #define TRANSACT2_FINDNEXT 2 | |
| #define TRANSACT2_QFSINFO 3 | |
| #define TRANSACT2_SETFSINFO 4 | |
| #define TRANSACT2_QPATHINFO 5 | |
| #define TRANSACT2_SETPATHINFO 6 | |
| #define TRANSACT2_QFILEINFO 7 | |
| #define TRANSACT2_SETFILEINFO 8 | |
| #define TRANSACT2_FSCTL 9 | |
| #define TRANSACT2_IOCTL 10 | |
| #define TRANSACT2_FINDNOTIFYFIRST 11 | |
| #define TRANSACT2_FINDNOTIFYNEXT 12 | |
| #define TRANSACT2_MKDIR 13 | |
| /* Information Levels - Shared? */ | |
| #define SMB_INFO_STANDARD 1 | |
| #define SMB_INFO_QUERY_EA_SIZE 2 | |
| #define SMB_INFO_QUERY_EAS_FROM_LIST 3 | |
| #define SMB_INFO_QUERY_ALL_EAS 4 | |
| #define SMB_INFO_IS_NAME_VALID 6 | |
| /* Information Levels - TRANSACT2_FINDFIRST */ | |
| #define SMB_FIND_FILE_DIRECTORY_INFO 0x101 | |
| #define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102 | |
| #define SMB_FIND_FILE_NAMES_INFO 0x103 | |
| #define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104 | |
| /* Information Levels - TRANSACT2_QPATHINFO */ | |
| #define SMB_QUERY_FILE_BASIC_INFO 0x101 | |
| #define SMB_QUERY_FILE_STANDARD_INFO 0x102 | |
| #define SMB_QUERY_FILE_EA_INFO 0x103 | |
| #define SMB_QUERY_FILE_NAME_INFO 0x104 | |
| #define SMB_QUERY_FILE_ALL_INFO 0x107 | |
| #define SMB_QUERY_FILE_ALT_NAME_INFO 0x108 | |
| #define SMB_QUERY_FILE_STREAM_INFO 0x109 | |
| #define SMB_QUERY_FILE_COMPRESSION_INFO 0x10b | |
| /* Information Levels - TRANSACT2_SETFILEINFO */ | |
| #define SMB_SET_FILE_BASIC_INFO 0x101 | |
| #define SMB_SET_FILE_DISPOSITION_INFO 0x102 | |
| #define SMB_SET_FILE_ALLOCATION_INFO 0x103 | |
| #define SMB_SET_FILE_END_OF_FILE_INFO 0x104 | |
| /* smb_flg field flags */ | |
| #define SMB_FLAGS_SUPPORT_LOCKREAD 0x01 | |
| #define SMB_FLAGS_CLIENT_BUF_AVAIL 0x02 | |
| #define SMB_FLAGS_RESERVED 0x04 | |
| #define SMB_FLAGS_CASELESS_PATHNAMES 0x08 | |
| #define SMB_FLAGS_CANONICAL_PATHNAMES 0x10 | |
| #define SMB_FLAGS_REQUEST_OPLOCK 0x20 | |
| #define SMB_FLAGS_REQUEST_BATCH_OPLOCK 0x40 | |
| #define SMB_FLAGS_REPLY 0x80 | |
| /* smb_flg2 field flags (samba-2.2.0/source/include/smb.h) */ | |
| #define SMB_FLAGS2_LONG_PATH_COMPONENTS 0x0001 | |
| #define SMB_FLAGS2_EXTENDED_ATTRIBUTES 0x0002 | |
| #define SMB_FLAGS2_DFS_PATHNAMES 0x1000 | |
| #define SMB_FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000 | |
| #define SMB_FLAGS2_32_BIT_ERROR_CODES 0x4000 | |
| #define SMB_FLAGS2_UNICODE_STRINGS 0x8000 | |
| /* | |
| * UNIX stuff (from samba trans2.h) | |
| */ | |
| #define MIN_UNIX_INFO_LEVEL 0x200 | |
| #define MAX_UNIX_INFO_LEVEL 0x2FF | |
| #define SMB_FIND_FILE_UNIX 0x202 | |
| #define SMB_QUERY_FILE_UNIX_BASIC 0x200 | |
| #define SMB_QUERY_FILE_UNIX_LINK 0x201 | |
| #define SMB_QUERY_FILE_UNIX_HLINK 0x202 | |
| #define SMB_SET_FILE_UNIX_BASIC 0x200 | |
| #define SMB_SET_FILE_UNIX_LINK 0x201 | |
| #define SMB_SET_FILE_UNIX_HLINK 0x203 | |
| #define SMB_QUERY_CIFS_UNIX_INFO 0x200 | |
| /* values which means "don't change it" */ | |
| #define SMB_MODE_NO_CHANGE 0xFFFFFFFF | |
| #define SMB_UID_NO_CHANGE 0xFFFFFFFF | |
| #define SMB_GID_NO_CHANGE 0xFFFFFFFF | |
| #define SMB_TIME_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL | |
| #define SMB_SIZE_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL | |
| /* UNIX filetype mappings. */ | |
| #define UNIX_TYPE_FILE 0 | |
| #define UNIX_TYPE_DIR 1 | |
| #define UNIX_TYPE_SYMLINK 2 | |
| #define UNIX_TYPE_CHARDEV 3 | |
| #define UNIX_TYPE_BLKDEV 4 | |
| #define UNIX_TYPE_FIFO 5 | |
| #define UNIX_TYPE_SOCKET 6 | |
| #define UNIX_TYPE_UNKNOWN 0xFFFFFFFF | |
| #endif /* _SMBNO_H_ */ |