| /* | |
| * Definitions for the 'struct sk_buff' memory handlers. | |
| * | |
| * Authors: | |
| * Alan Cox, <gw4pts@gw4pts.ampr.org> | |
| * Florian La Roche, <rzsfl@rz.uni-sb.de> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #ifndef _LINUX_SKBUFF_H | |
| #define _LINUX_SKBUFF_H | |
| #include <linux/kernel.h> | |
| #include <linux/compiler.h> | |
| #include <linux/time.h> | |
| #include <linux/cache.h> | |
| #include <asm/atomic.h> | |
| #include <asm/types.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/net.h> | |
| #include <linux/textsearch.h> | |
| #include <net/checksum.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/hrtimer.h> | |
| #define HAVE_ALLOC_SKB /* For the drivers to know */ | |
| #define HAVE_ALIGNABLE_SKB /* Ditto 8) */ | |
| /* Don't change this without changing skb_csum_unnecessary! */ | |
| #define CHECKSUM_NONE 0 | |
| #define CHECKSUM_UNNECESSARY 1 | |
| #define CHECKSUM_COMPLETE 2 | |
| #define CHECKSUM_PARTIAL 3 | |
| #define SKB_DATA_ALIGN(X) (((X) + (SMP_CACHE_BYTES - 1)) & \ | |
| ~(SMP_CACHE_BYTES - 1)) | |
| #define SKB_WITH_OVERHEAD(X) \ | |
| ((X) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) | |
| #define SKB_MAX_ORDER(X, ORDER) \ | |
| SKB_WITH_OVERHEAD((PAGE_SIZE << (ORDER)) - (X)) | |
| #define SKB_MAX_HEAD(X) (SKB_MAX_ORDER((X), 0)) | |
| #define SKB_MAX_ALLOC (SKB_MAX_ORDER(0, 2)) | |
| /* A. Checksumming of received packets by device. | |
| * | |
| * NONE: device failed to checksum this packet. | |
| * skb->csum is undefined. | |
| * | |
| * UNNECESSARY: device parsed packet and wouldbe verified checksum. | |
| * skb->csum is undefined. | |
| * It is bad option, but, unfortunately, many of vendors do this. | |
| * Apparently with secret goal to sell you new device, when you | |
| * will add new protocol to your host. F.e. IPv6. 8) | |
| * | |
| * COMPLETE: the most generic way. Device supplied checksum of _all_ | |
| * the packet as seen by netif_rx in skb->csum. | |
| * NOTE: Even if device supports only some protocols, but | |
| * is able to produce some skb->csum, it MUST use COMPLETE, | |
| * not UNNECESSARY. | |
| * | |
| * PARTIAL: identical to the case for output below. This may occur | |
| * on a packet received directly from another Linux OS, e.g., | |
| * a virtualised Linux kernel on the same host. The packet can | |
| * be treated in the same way as UNNECESSARY except that on | |
| * output (i.e., forwarding) the checksum must be filled in | |
| * by the OS or the hardware. | |
| * | |
| * B. Checksumming on output. | |
| * | |
| * NONE: skb is checksummed by protocol or csum is not required. | |
| * | |
| * PARTIAL: device is required to csum packet as seen by hard_start_xmit | |
| * from skb->csum_start to the end and to record the checksum | |
| * at skb->csum_start + skb->csum_offset. | |
| * | |
| * Device must show its capabilities in dev->features, set | |
| * at device setup time. | |
| * NETIF_F_HW_CSUM - it is clever device, it is able to checksum | |
| * everything. | |
| * NETIF_F_NO_CSUM - loopback or reliable single hop media. | |
| * NETIF_F_IP_CSUM - device is dumb. It is able to csum only | |
| * TCP/UDP over IPv4. Sigh. Vendors like this | |
| * way by an unknown reason. Though, see comment above | |
| * about CHECKSUM_UNNECESSARY. 8) | |
| * NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead. | |
| * | |
| * Any questions? No questions, good. --ANK | |
| */ | |
| struct net_device; | |
| struct scatterlist; | |
| struct pipe_inode_info; | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| struct nf_conntrack { | |
| atomic_t use; | |
| }; | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| struct nf_bridge_info { | |
| atomic_t use; | |
| struct net_device *physindev; | |
| struct net_device *physoutdev; | |
| unsigned int mask; | |
| unsigned long data[32 / sizeof(unsigned long)]; | |
| }; | |
| #endif | |
| struct sk_buff_head { | |
| /* These two members must be first. */ | |
| struct sk_buff *next; | |
| struct sk_buff *prev; | |
| __u32 qlen; | |
| spinlock_t lock; | |
| }; | |
| struct sk_buff; | |
| /* To allow 64K frame to be packed as single skb without frag_list */ | |
| #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) | |
| typedef struct skb_frag_struct skb_frag_t; | |
| struct skb_frag_struct { | |
| struct page *page; | |
| __u32 page_offset; | |
| __u32 size; | |
| }; | |
| /* This data is invariant across clones and lives at | |
| * the end of the header data, ie. at skb->end. | |
| */ | |
| struct skb_shared_info { | |
| atomic_t dataref; | |
| unsigned short nr_frags; | |
| unsigned short gso_size; | |
| /* Warning: this field is not always filled in (UFO)! */ | |
| unsigned short gso_segs; | |
| unsigned short gso_type; | |
| __be32 ip6_frag_id; | |
| #ifdef CONFIG_HAS_DMA | |
| unsigned int num_dma_maps; | |
| #endif | |
| struct sk_buff *frag_list; | |
| skb_frag_t frags[MAX_SKB_FRAGS]; | |
| #ifdef CONFIG_HAS_DMA | |
| dma_addr_t dma_maps[MAX_SKB_FRAGS + 1]; | |
| #endif | |
| }; | |
| /* We divide dataref into two halves. The higher 16 bits hold references | |
| * to the payload part of skb->data. The lower 16 bits hold references to | |
| * the entire skb->data. A clone of a headerless skb holds the length of | |
| * the header in skb->hdr_len. | |
| * | |
| * All users must obey the rule that the skb->data reference count must be | |
| * greater than or equal to the payload reference count. | |
| * | |
| * Holding a reference to the payload part means that the user does not | |
| * care about modifications to the header part of skb->data. | |
| */ | |
| #define SKB_DATAREF_SHIFT 16 | |
| #define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1) | |
| enum { | |
| SKB_FCLONE_UNAVAILABLE, | |
| SKB_FCLONE_ORIG, | |
| SKB_FCLONE_CLONE, | |
| }; | |
| enum { | |
| SKB_GSO_TCPV4 = 1 << 0, | |
| SKB_GSO_UDP = 1 << 1, | |
| /* This indicates the skb is from an untrusted source. */ | |
| SKB_GSO_DODGY = 1 << 2, | |
| /* This indicates the tcp segment has CWR set. */ | |
| SKB_GSO_TCP_ECN = 1 << 3, | |
| SKB_GSO_TCPV6 = 1 << 4, | |
| }; | |
| #if BITS_PER_LONG > 32 | |
| #define NET_SKBUFF_DATA_USES_OFFSET 1 | |
| #endif | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| typedef unsigned int sk_buff_data_t; | |
| #else | |
| typedef unsigned char *sk_buff_data_t; | |
| #endif | |
| /** | |
| * struct sk_buff - socket buffer | |
| * @next: Next buffer in list | |
| * @prev: Previous buffer in list | |
| * @sk: Socket we are owned by | |
| * @tstamp: Time we arrived | |
| * @dev: Device we arrived on/are leaving by | |
| * @transport_header: Transport layer header | |
| * @network_header: Network layer header | |
| * @mac_header: Link layer header | |
| * @dst: destination entry | |
| * @sp: the security path, used for xfrm | |
| * @cb: Control buffer. Free for use by every layer. Put private vars here | |
| * @len: Length of actual data | |
| * @data_len: Data length | |
| * @mac_len: Length of link layer header | |
| * @hdr_len: writable header length of cloned skb | |
| * @csum: Checksum (must include start/offset pair) | |
| * @csum_start: Offset from skb->head where checksumming should start | |
| * @csum_offset: Offset from csum_start where checksum should be stored | |
| * @local_df: allow local fragmentation | |
| * @cloned: Head may be cloned (check refcnt to be sure) | |
| * @nohdr: Payload reference only, must not modify header | |
| * @pkt_type: Packet class | |
| * @fclone: skbuff clone status | |
| * @ip_summed: Driver fed us an IP checksum | |
| * @priority: Packet queueing priority | |
| * @users: User count - see {datagram,tcp}.c | |
| * @protocol: Packet protocol from driver | |
| * @truesize: Buffer size | |
| * @head: Head of buffer | |
| * @data: Data head pointer | |
| * @tail: Tail pointer | |
| * @end: End pointer | |
| * @destructor: Destruct function | |
| * @mark: Generic packet mark | |
| * @nfct: Associated connection, if any | |
| * @ipvs_property: skbuff is owned by ipvs | |
| * @peeked: this packet has been seen already, so stats have been | |
| * done for it, don't do them again | |
| * @nf_trace: netfilter packet trace flag | |
| * @nfctinfo: Relationship of this skb to the connection | |
| * @nfct_reasm: netfilter conntrack re-assembly pointer | |
| * @nf_bridge: Saved data about a bridged frame - see br_netfilter.c | |
| * @iif: ifindex of device we arrived on | |
| * @queue_mapping: Queue mapping for multiqueue devices | |
| * @tc_index: Traffic control index | |
| * @tc_verd: traffic control verdict | |
| * @ndisc_nodetype: router type (from link layer) | |
| * @do_not_encrypt: set to prevent encryption of this frame | |
| * @dma_cookie: a cookie to one of several possible DMA operations | |
| * done by skb DMA functions | |
| * @secmark: security marking | |
| * @vlan_tci: vlan tag control information | |
| */ | |
| struct sk_buff { | |
| /* These two members must be first. */ | |
| struct sk_buff *next; | |
| struct sk_buff *prev; | |
| struct sock *sk; | |
| ktime_t tstamp; | |
| struct net_device *dev; | |
| union { | |
| struct dst_entry *dst; | |
| struct rtable *rtable; | |
| }; | |
| struct sec_path *sp; | |
| /* | |
| * This is the control buffer. It is free to use for every | |
| * layer. Please put your private variables there. If you | |
| * want to keep them across layers you have to do a skb_clone() | |
| * first. This is owned by whoever has the skb queued ATM. | |
| */ | |
| char cb[48]; | |
| unsigned int len, | |
| data_len; | |
| __u16 mac_len, | |
| hdr_len; | |
| union { | |
| __wsum csum; | |
| struct { | |
| __u16 csum_start; | |
| __u16 csum_offset; | |
| }; | |
| }; | |
| __u32 priority; | |
| __u8 local_df:1, | |
| cloned:1, | |
| ip_summed:2, | |
| nohdr:1, | |
| nfctinfo:3; | |
| __u8 pkt_type:3, | |
| fclone:2, | |
| ipvs_property:1, | |
| peeked:1, | |
| nf_trace:1; | |
| __be16 protocol; | |
| void (*destructor)(struct sk_buff *skb); | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| struct nf_conntrack *nfct; | |
| struct sk_buff *nfct_reasm; | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| struct nf_bridge_info *nf_bridge; | |
| #endif | |
| int iif; | |
| __u16 queue_mapping; | |
| #ifdef CONFIG_NET_SCHED | |
| __u16 tc_index; /* traffic control index */ | |
| #ifdef CONFIG_NET_CLS_ACT | |
| __u16 tc_verd; /* traffic control verdict */ | |
| #endif | |
| #endif | |
| #ifdef CONFIG_IPV6_NDISC_NODETYPE | |
| __u8 ndisc_nodetype:2; | |
| #endif | |
| #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) | |
| __u8 do_not_encrypt:1; | |
| #endif | |
| /* 0/13/14 bit hole */ | |
| #ifdef CONFIG_NET_DMA | |
| dma_cookie_t dma_cookie; | |
| #endif | |
| #ifdef CONFIG_NETWORK_SECMARK | |
| __u32 secmark; | |
| #endif | |
| __u32 mark; | |
| __u16 vlan_tci; | |
| sk_buff_data_t transport_header; | |
| sk_buff_data_t network_header; | |
| sk_buff_data_t mac_header; | |
| /* These elements must be at the end, see alloc_skb() for details. */ | |
| sk_buff_data_t tail; | |
| sk_buff_data_t end; | |
| unsigned char *head, | |
| *data; | |
| unsigned int truesize; | |
| atomic_t users; | |
| }; | |
| #ifdef __KERNEL__ | |
| /* | |
| * Handling routines are only of interest to the kernel | |
| */ | |
| #include <linux/slab.h> | |
| #include <asm/system.h> | |
| #ifdef CONFIG_HAS_DMA | |
| #include <linux/dma-mapping.h> | |
| extern int skb_dma_map(struct device *dev, struct sk_buff *skb, | |
| enum dma_data_direction dir); | |
| extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb, | |
| enum dma_data_direction dir); | |
| #endif | |
| extern void kfree_skb(struct sk_buff *skb); | |
| extern void __kfree_skb(struct sk_buff *skb); | |
| extern struct sk_buff *__alloc_skb(unsigned int size, | |
| gfp_t priority, int fclone, int node); | |
| static inline struct sk_buff *alloc_skb(unsigned int size, | |
| gfp_t priority) | |
| { | |
| return __alloc_skb(size, priority, 0, -1); | |
| } | |
| static inline struct sk_buff *alloc_skb_fclone(unsigned int size, | |
| gfp_t priority) | |
| { | |
| return __alloc_skb(size, priority, 1, -1); | |
| } | |
| extern int skb_recycle_check(struct sk_buff *skb, int skb_size); | |
| extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src); | |
| extern struct sk_buff *skb_clone(struct sk_buff *skb, | |
| gfp_t priority); | |
| extern struct sk_buff *skb_copy(const struct sk_buff *skb, | |
| gfp_t priority); | |
| extern struct sk_buff *pskb_copy(struct sk_buff *skb, | |
| gfp_t gfp_mask); | |
| extern int pskb_expand_head(struct sk_buff *skb, | |
| int nhead, int ntail, | |
| gfp_t gfp_mask); | |
| extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb, | |
| unsigned int headroom); | |
| extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb, | |
| int newheadroom, int newtailroom, | |
| gfp_t priority); | |
| extern int skb_to_sgvec(struct sk_buff *skb, | |
| struct scatterlist *sg, int offset, | |
| int len); | |
| extern int skb_cow_data(struct sk_buff *skb, int tailbits, | |
| struct sk_buff **trailer); | |
| extern int skb_pad(struct sk_buff *skb, int pad); | |
| #define dev_kfree_skb(a) kfree_skb(a) | |
| extern void skb_over_panic(struct sk_buff *skb, int len, | |
| void *here); | |
| extern void skb_under_panic(struct sk_buff *skb, int len, | |
| void *here); | |
| extern void skb_truesize_bug(struct sk_buff *skb); | |
| static inline void skb_truesize_check(struct sk_buff *skb) | |
| { | |
| int len = sizeof(struct sk_buff) + skb->len; | |
| if (unlikely((int)skb->truesize < len)) | |
| skb_truesize_bug(skb); | |
| } | |
| extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, | |
| int getfrag(void *from, char *to, int offset, | |
| int len,int odd, struct sk_buff *skb), | |
| void *from, int length); | |
| struct skb_seq_state | |
| { | |
| __u32 lower_offset; | |
| __u32 upper_offset; | |
| __u32 frag_idx; | |
| __u32 stepped_offset; | |
| struct sk_buff *root_skb; | |
| struct sk_buff *cur_skb; | |
| __u8 *frag_data; | |
| }; | |
| extern void skb_prepare_seq_read(struct sk_buff *skb, | |
| unsigned int from, unsigned int to, | |
| struct skb_seq_state *st); | |
| extern unsigned int skb_seq_read(unsigned int consumed, const u8 **data, | |
| struct skb_seq_state *st); | |
| extern void skb_abort_seq_read(struct skb_seq_state *st); | |
| extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, | |
| unsigned int to, struct ts_config *config, | |
| struct ts_state *state); | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| static inline unsigned char *skb_end_pointer(const struct sk_buff *skb) | |
| { | |
| return skb->head + skb->end; | |
| } | |
| #else | |
| static inline unsigned char *skb_end_pointer(const struct sk_buff *skb) | |
| { | |
| return skb->end; | |
| } | |
| #endif | |
| /* Internal */ | |
| #define skb_shinfo(SKB) ((struct skb_shared_info *)(skb_end_pointer(SKB))) | |
| /** | |
| * skb_queue_empty - check if a queue is empty | |
| * @list: queue head | |
| * | |
| * Returns true if the queue is empty, false otherwise. | |
| */ | |
| static inline int skb_queue_empty(const struct sk_buff_head *list) | |
| { | |
| return list->next == (struct sk_buff *)list; | |
| } | |
| /** | |
| * skb_queue_is_last - check if skb is the last entry in the queue | |
| * @list: queue head | |
| * @skb: buffer | |
| * | |
| * Returns true if @skb is the last buffer on the list. | |
| */ | |
| static inline bool skb_queue_is_last(const struct sk_buff_head *list, | |
| const struct sk_buff *skb) | |
| { | |
| return (skb->next == (struct sk_buff *) list); | |
| } | |
| /** | |
| * skb_queue_next - return the next packet in the queue | |
| * @list: queue head | |
| * @skb: current buffer | |
| * | |
| * Return the next packet in @list after @skb. It is only valid to | |
| * call this if skb_queue_is_last() evaluates to false. | |
| */ | |
| static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list, | |
| const struct sk_buff *skb) | |
| { | |
| /* This BUG_ON may seem severe, but if we just return then we | |
| * are going to dereference garbage. | |
| */ | |
| BUG_ON(skb_queue_is_last(list, skb)); | |
| return skb->next; | |
| } | |
| /** | |
| * skb_get - reference buffer | |
| * @skb: buffer to reference | |
| * | |
| * Makes another reference to a socket buffer and returns a pointer | |
| * to the buffer. | |
| */ | |
| static inline struct sk_buff *skb_get(struct sk_buff *skb) | |
| { | |
| atomic_inc(&skb->users); | |
| return skb; | |
| } | |
| /* | |
| * If users == 1, we are the only owner and are can avoid redundant | |
| * atomic change. | |
| */ | |
| /** | |
| * skb_cloned - is the buffer a clone | |
| * @skb: buffer to check | |
| * | |
| * Returns true if the buffer was generated with skb_clone() and is | |
| * one of multiple shared copies of the buffer. Cloned buffers are | |
| * shared data so must not be written to under normal circumstances. | |
| */ | |
| static inline int skb_cloned(const struct sk_buff *skb) | |
| { | |
| return skb->cloned && | |
| (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1; | |
| } | |
| /** | |
| * skb_header_cloned - is the header a clone | |
| * @skb: buffer to check | |
| * | |
| * Returns true if modifying the header part of the buffer requires | |
| * the data to be copied. | |
| */ | |
| static inline int skb_header_cloned(const struct sk_buff *skb) | |
| { | |
| int dataref; | |
| if (!skb->cloned) | |
| return 0; | |
| dataref = atomic_read(&skb_shinfo(skb)->dataref); | |
| dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT); | |
| return dataref != 1; | |
| } | |
| /** | |
| * skb_header_release - release reference to header | |
| * @skb: buffer to operate on | |
| * | |
| * Drop a reference to the header part of the buffer. This is done | |
| * by acquiring a payload reference. You must not read from the header | |
| * part of skb->data after this. | |
| */ | |
| static inline void skb_header_release(struct sk_buff *skb) | |
| { | |
| BUG_ON(skb->nohdr); | |
| skb->nohdr = 1; | |
| atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref); | |
| } | |
| /** | |
| * skb_shared - is the buffer shared | |
| * @skb: buffer to check | |
| * | |
| * Returns true if more than one person has a reference to this | |
| * buffer. | |
| */ | |
| static inline int skb_shared(const struct sk_buff *skb) | |
| { | |
| return atomic_read(&skb->users) != 1; | |
| } | |
| /** | |
| * skb_share_check - check if buffer is shared and if so clone it | |
| * @skb: buffer to check | |
| * @pri: priority for memory allocation | |
| * | |
| * If the buffer is shared the buffer is cloned and the old copy | |
| * drops a reference. A new clone with a single reference is returned. | |
| * If the buffer is not shared the original buffer is returned. When | |
| * being called from interrupt status or with spinlocks held pri must | |
| * be GFP_ATOMIC. | |
| * | |
| * NULL is returned on a memory allocation failure. | |
| */ | |
| static inline struct sk_buff *skb_share_check(struct sk_buff *skb, | |
| gfp_t pri) | |
| { | |
| might_sleep_if(pri & __GFP_WAIT); | |
| if (skb_shared(skb)) { | |
| struct sk_buff *nskb = skb_clone(skb, pri); | |
| kfree_skb(skb); | |
| skb = nskb; | |
| } | |
| return skb; | |
| } | |
| /* | |
| * Copy shared buffers into a new sk_buff. We effectively do COW on | |
| * packets to handle cases where we have a local reader and forward | |
| * and a couple of other messy ones. The normal one is tcpdumping | |
| * a packet thats being forwarded. | |
| */ | |
| /** | |
| * skb_unshare - make a copy of a shared buffer | |
| * @skb: buffer to check | |
| * @pri: priority for memory allocation | |
| * | |
| * If the socket buffer is a clone then this function creates a new | |
| * copy of the data, drops a reference count on the old copy and returns | |
| * the new copy with the reference count at 1. If the buffer is not a clone | |
| * the original buffer is returned. When called with a spinlock held or | |
| * from interrupt state @pri must be %GFP_ATOMIC | |
| * | |
| * %NULL is returned on a memory allocation failure. | |
| */ | |
| static inline struct sk_buff *skb_unshare(struct sk_buff *skb, | |
| gfp_t pri) | |
| { | |
| might_sleep_if(pri & __GFP_WAIT); | |
| if (skb_cloned(skb)) { | |
| struct sk_buff *nskb = skb_copy(skb, pri); | |
| kfree_skb(skb); /* Free our shared copy */ | |
| skb = nskb; | |
| } | |
| return skb; | |
| } | |
| /** | |
| * skb_peek | |
| * @list_: list to peek at | |
| * | |
| * Peek an &sk_buff. Unlike most other operations you _MUST_ | |
| * be careful with this one. A peek leaves the buffer on the | |
| * list and someone else may run off with it. You must hold | |
| * the appropriate locks or have a private queue to do this. | |
| * | |
| * Returns %NULL for an empty list or a pointer to the head element. | |
| * The reference count is not incremented and the reference is therefore | |
| * volatile. Use with caution. | |
| */ | |
| static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) | |
| { | |
| struct sk_buff *list = ((struct sk_buff *)list_)->next; | |
| if (list == (struct sk_buff *)list_) | |
| list = NULL; | |
| return list; | |
| } | |
| /** | |
| * skb_peek_tail | |
| * @list_: list to peek at | |
| * | |
| * Peek an &sk_buff. Unlike most other operations you _MUST_ | |
| * be careful with this one. A peek leaves the buffer on the | |
| * list and someone else may run off with it. You must hold | |
| * the appropriate locks or have a private queue to do this. | |
| * | |
| * Returns %NULL for an empty list or a pointer to the tail element. | |
| * The reference count is not incremented and the reference is therefore | |
| * volatile. Use with caution. | |
| */ | |
| static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_) | |
| { | |
| struct sk_buff *list = ((struct sk_buff *)list_)->prev; | |
| if (list == (struct sk_buff *)list_) | |
| list = NULL; | |
| return list; | |
| } | |
| /** | |
| * skb_queue_len - get queue length | |
| * @list_: list to measure | |
| * | |
| * Return the length of an &sk_buff queue. | |
| */ | |
| static inline __u32 skb_queue_len(const struct sk_buff_head *list_) | |
| { | |
| return list_->qlen; | |
| } | |
| /** | |
| * __skb_queue_head_init - initialize non-spinlock portions of sk_buff_head | |
| * @list: queue to initialize | |
| * | |
| * This initializes only the list and queue length aspects of | |
| * an sk_buff_head object. This allows to initialize the list | |
| * aspects of an sk_buff_head without reinitializing things like | |
| * the spinlock. It can also be used for on-stack sk_buff_head | |
| * objects where the spinlock is known to not be used. | |
| */ | |
| static inline void __skb_queue_head_init(struct sk_buff_head *list) | |
| { | |
| list->prev = list->next = (struct sk_buff *)list; | |
| list->qlen = 0; | |
| } | |
| /* | |
| * This function creates a split out lock class for each invocation; | |
| * this is needed for now since a whole lot of users of the skb-queue | |
| * infrastructure in drivers have different locking usage (in hardirq) | |
| * than the networking core (in softirq only). In the long run either the | |
| * network layer or drivers should need annotation to consolidate the | |
| * main types of usage into 3 classes. | |
| */ | |
| static inline void skb_queue_head_init(struct sk_buff_head *list) | |
| { | |
| spin_lock_init(&list->lock); | |
| __skb_queue_head_init(list); | |
| } | |
| static inline void skb_queue_head_init_class(struct sk_buff_head *list, | |
| struct lock_class_key *class) | |
| { | |
| skb_queue_head_init(list); | |
| lockdep_set_class(&list->lock, class); | |
| } | |
| /* | |
| * Insert an sk_buff on a list. | |
| * | |
| * The "__skb_xxxx()" functions are the non-atomic ones that | |
| * can only be called with interrupts disabled. | |
| */ | |
| extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); | |
| static inline void __skb_insert(struct sk_buff *newsk, | |
| struct sk_buff *prev, struct sk_buff *next, | |
| struct sk_buff_head *list) | |
| { | |
| newsk->next = next; | |
| newsk->prev = prev; | |
| next->prev = prev->next = newsk; | |
| list->qlen++; | |
| } | |
| static inline void __skb_queue_splice(const struct sk_buff_head *list, | |
| struct sk_buff *prev, | |
| struct sk_buff *next) | |
| { | |
| struct sk_buff *first = list->next; | |
| struct sk_buff *last = list->prev; | |
| first->prev = prev; | |
| prev->next = first; | |
| last->next = next; | |
| next->prev = last; | |
| } | |
| /** | |
| * skb_queue_splice - join two skb lists, this is designed for stacks | |
| * @list: the new list to add | |
| * @head: the place to add it in the first list | |
| */ | |
| static inline void skb_queue_splice(const struct sk_buff_head *list, | |
| struct sk_buff_head *head) | |
| { | |
| if (!skb_queue_empty(list)) { | |
| __skb_queue_splice(list, (struct sk_buff *) head, head->next); | |
| head->qlen += list->qlen; | |
| } | |
| } | |
| /** | |
| * skb_queue_splice - join two skb lists and reinitialise the emptied list | |
| * @list: the new list to add | |
| * @head: the place to add it in the first list | |
| * | |
| * The list at @list is reinitialised | |
| */ | |
| static inline void skb_queue_splice_init(struct sk_buff_head *list, | |
| struct sk_buff_head *head) | |
| { | |
| if (!skb_queue_empty(list)) { | |
| __skb_queue_splice(list, (struct sk_buff *) head, head->next); | |
| head->qlen += list->qlen; | |
| __skb_queue_head_init(list); | |
| } | |
| } | |
| /** | |
| * skb_queue_splice_tail - join two skb lists, each list being a queue | |
| * @list: the new list to add | |
| * @head: the place to add it in the first list | |
| */ | |
| static inline void skb_queue_splice_tail(const struct sk_buff_head *list, | |
| struct sk_buff_head *head) | |
| { | |
| if (!skb_queue_empty(list)) { | |
| __skb_queue_splice(list, head->prev, (struct sk_buff *) head); | |
| head->qlen += list->qlen; | |
| } | |
| } | |
| /** | |
| * skb_queue_splice_tail - join two skb lists and reinitialise the emptied list | |
| * @list: the new list to add | |
| * @head: the place to add it in the first list | |
| * | |
| * Each of the lists is a queue. | |
| * The list at @list is reinitialised | |
| */ | |
| static inline void skb_queue_splice_tail_init(struct sk_buff_head *list, | |
| struct sk_buff_head *head) | |
| { | |
| if (!skb_queue_empty(list)) { | |
| __skb_queue_splice(list, head->prev, (struct sk_buff *) head); | |
| head->qlen += list->qlen; | |
| __skb_queue_head_init(list); | |
| } | |
| } | |
| /** | |
| * __skb_queue_after - queue a buffer at the list head | |
| * @list: list to use | |
| * @prev: place after this buffer | |
| * @newsk: buffer to queue | |
| * | |
| * Queue a buffer int the middle of a list. This function takes no locks | |
| * and you must therefore hold required locks before calling it. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| static inline void __skb_queue_after(struct sk_buff_head *list, | |
| struct sk_buff *prev, | |
| struct sk_buff *newsk) | |
| { | |
| __skb_insert(newsk, prev, prev->next, list); | |
| } | |
| extern void skb_append(struct sk_buff *old, struct sk_buff *newsk, | |
| struct sk_buff_head *list); | |
| static inline void __skb_queue_before(struct sk_buff_head *list, | |
| struct sk_buff *next, | |
| struct sk_buff *newsk) | |
| { | |
| __skb_insert(newsk, next->prev, next, list); | |
| } | |
| /** | |
| * __skb_queue_head - queue a buffer at the list head | |
| * @list: list to use | |
| * @newsk: buffer to queue | |
| * | |
| * Queue a buffer at the start of a list. This function takes no locks | |
| * and you must therefore hold required locks before calling it. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk); | |
| static inline void __skb_queue_head(struct sk_buff_head *list, | |
| struct sk_buff *newsk) | |
| { | |
| __skb_queue_after(list, (struct sk_buff *)list, newsk); | |
| } | |
| /** | |
| * __skb_queue_tail - queue a buffer at the list tail | |
| * @list: list to use | |
| * @newsk: buffer to queue | |
| * | |
| * Queue a buffer at the end of a list. This function takes no locks | |
| * and you must therefore hold required locks before calling it. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk); | |
| static inline void __skb_queue_tail(struct sk_buff_head *list, | |
| struct sk_buff *newsk) | |
| { | |
| __skb_queue_before(list, (struct sk_buff *)list, newsk); | |
| } | |
| /* | |
| * remove sk_buff from list. _Must_ be called atomically, and with | |
| * the list known.. | |
| */ | |
| extern void skb_unlink(struct sk_buff *skb, struct sk_buff_head *list); | |
| static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list) | |
| { | |
| struct sk_buff *next, *prev; | |
| list->qlen--; | |
| next = skb->next; | |
| prev = skb->prev; | |
| skb->next = skb->prev = NULL; | |
| next->prev = prev; | |
| prev->next = next; | |
| } | |
| /** | |
| * __skb_dequeue - remove from the head of the queue | |
| * @list: list to dequeue from | |
| * | |
| * Remove the head of the list. This function does not take any locks | |
| * so must be used with appropriate locks held only. The head item is | |
| * returned or %NULL if the list is empty. | |
| */ | |
| extern struct sk_buff *skb_dequeue(struct sk_buff_head *list); | |
| static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list) | |
| { | |
| struct sk_buff *skb = skb_peek(list); | |
| if (skb) | |
| __skb_unlink(skb, list); | |
| return skb; | |
| } | |
| /** | |
| * __skb_dequeue_tail - remove from the tail of the queue | |
| * @list: list to dequeue from | |
| * | |
| * Remove the tail of the list. This function does not take any locks | |
| * so must be used with appropriate locks held only. The tail item is | |
| * returned or %NULL if the list is empty. | |
| */ | |
| extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list); | |
| static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list) | |
| { | |
| struct sk_buff *skb = skb_peek_tail(list); | |
| if (skb) | |
| __skb_unlink(skb, list); | |
| return skb; | |
| } | |
| static inline int skb_is_nonlinear(const struct sk_buff *skb) | |
| { | |
| return skb->data_len; | |
| } | |
| static inline unsigned int skb_headlen(const struct sk_buff *skb) | |
| { | |
| return skb->len - skb->data_len; | |
| } | |
| static inline int skb_pagelen(const struct sk_buff *skb) | |
| { | |
| int i, len = 0; | |
| for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) | |
| len += skb_shinfo(skb)->frags[i].size; | |
| return len + skb_headlen(skb); | |
| } | |
| static inline void skb_fill_page_desc(struct sk_buff *skb, int i, | |
| struct page *page, int off, int size) | |
| { | |
| skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
| frag->page = page; | |
| frag->page_offset = off; | |
| frag->size = size; | |
| skb_shinfo(skb)->nr_frags = i + 1; | |
| } | |
| extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, | |
| int off, int size); | |
| #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags) | |
| #define SKB_FRAG_ASSERT(skb) BUG_ON(skb_shinfo(skb)->frag_list) | |
| #define SKB_LINEAR_ASSERT(skb) BUG_ON(skb_is_nonlinear(skb)) | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb) | |
| { | |
| return skb->head + skb->tail; | |
| } | |
| static inline void skb_reset_tail_pointer(struct sk_buff *skb) | |
| { | |
| skb->tail = skb->data - skb->head; | |
| } | |
| static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset) | |
| { | |
| skb_reset_tail_pointer(skb); | |
| skb->tail += offset; | |
| } | |
| #else /* NET_SKBUFF_DATA_USES_OFFSET */ | |
| static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb) | |
| { | |
| return skb->tail; | |
| } | |
| static inline void skb_reset_tail_pointer(struct sk_buff *skb) | |
| { | |
| skb->tail = skb->data; | |
| } | |
| static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset) | |
| { | |
| skb->tail = skb->data + offset; | |
| } | |
| #endif /* NET_SKBUFF_DATA_USES_OFFSET */ | |
| /* | |
| * Add data to an sk_buff | |
| */ | |
| extern unsigned char *skb_put(struct sk_buff *skb, unsigned int len); | |
| static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len) | |
| { | |
| unsigned char *tmp = skb_tail_pointer(skb); | |
| SKB_LINEAR_ASSERT(skb); | |
| skb->tail += len; | |
| skb->len += len; | |
| return tmp; | |
| } | |
| extern unsigned char *skb_push(struct sk_buff *skb, unsigned int len); | |
| static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len) | |
| { | |
| skb->data -= len; | |
| skb->len += len; | |
| return skb->data; | |
| } | |
| extern unsigned char *skb_pull(struct sk_buff *skb, unsigned int len); | |
| static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len) | |
| { | |
| skb->len -= len; | |
| BUG_ON(skb->len < skb->data_len); | |
| return skb->data += len; | |
| } | |
| extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta); | |
| static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (len > skb_headlen(skb) && | |
| !__pskb_pull_tail(skb, len - skb_headlen(skb))) | |
| return NULL; | |
| skb->len -= len; | |
| return skb->data += len; | |
| } | |
| static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len) | |
| { | |
| return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len); | |
| } | |
| static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (likely(len <= skb_headlen(skb))) | |
| return 1; | |
| if (unlikely(len > skb->len)) | |
| return 0; | |
| return __pskb_pull_tail(skb, len - skb_headlen(skb)) != NULL; | |
| } | |
| /** | |
| * skb_headroom - bytes at buffer head | |
| * @skb: buffer to check | |
| * | |
| * Return the number of bytes of free space at the head of an &sk_buff. | |
| */ | |
| static inline unsigned int skb_headroom(const struct sk_buff *skb) | |
| { | |
| return skb->data - skb->head; | |
| } | |
| /** | |
| * skb_tailroom - bytes at buffer end | |
| * @skb: buffer to check | |
| * | |
| * Return the number of bytes of free space at the tail of an sk_buff | |
| */ | |
| static inline int skb_tailroom(const struct sk_buff *skb) | |
| { | |
| return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail; | |
| } | |
| /** | |
| * skb_reserve - adjust headroom | |
| * @skb: buffer to alter | |
| * @len: bytes to move | |
| * | |
| * Increase the headroom of an empty &sk_buff by reducing the tail | |
| * room. This is only allowed for an empty buffer. | |
| */ | |
| static inline void skb_reserve(struct sk_buff *skb, int len) | |
| { | |
| skb->data += len; | |
| skb->tail += len; | |
| } | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| static inline unsigned char *skb_transport_header(const struct sk_buff *skb) | |
| { | |
| return skb->head + skb->transport_header; | |
| } | |
| static inline void skb_reset_transport_header(struct sk_buff *skb) | |
| { | |
| skb->transport_header = skb->data - skb->head; | |
| } | |
| static inline void skb_set_transport_header(struct sk_buff *skb, | |
| const int offset) | |
| { | |
| skb_reset_transport_header(skb); | |
| skb->transport_header += offset; | |
| } | |
| static inline unsigned char *skb_network_header(const struct sk_buff *skb) | |
| { | |
| return skb->head + skb->network_header; | |
| } | |
| static inline void skb_reset_network_header(struct sk_buff *skb) | |
| { | |
| skb->network_header = skb->data - skb->head; | |
| } | |
| static inline void skb_set_network_header(struct sk_buff *skb, const int offset) | |
| { | |
| skb_reset_network_header(skb); | |
| skb->network_header += offset; | |
| } | |
| static inline unsigned char *skb_mac_header(const struct sk_buff *skb) | |
| { | |
| return skb->head + skb->mac_header; | |
| } | |
| static inline int skb_mac_header_was_set(const struct sk_buff *skb) | |
| { | |
| return skb->mac_header != ~0U; | |
| } | |
| static inline void skb_reset_mac_header(struct sk_buff *skb) | |
| { | |
| skb->mac_header = skb->data - skb->head; | |
| } | |
| static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) | |
| { | |
| skb_reset_mac_header(skb); | |
| skb->mac_header += offset; | |
| } | |
| #else /* NET_SKBUFF_DATA_USES_OFFSET */ | |
| static inline unsigned char *skb_transport_header(const struct sk_buff *skb) | |
| { | |
| return skb->transport_header; | |
| } | |
| static inline void skb_reset_transport_header(struct sk_buff *skb) | |
| { | |
| skb->transport_header = skb->data; | |
| } | |
| static inline void skb_set_transport_header(struct sk_buff *skb, | |
| const int offset) | |
| { | |
| skb->transport_header = skb->data + offset; | |
| } | |
| static inline unsigned char *skb_network_header(const struct sk_buff *skb) | |
| { | |
| return skb->network_header; | |
| } | |
| static inline void skb_reset_network_header(struct sk_buff *skb) | |
| { | |
| skb->network_header = skb->data; | |
| } | |
| static inline void skb_set_network_header(struct sk_buff *skb, const int offset) | |
| { | |
| skb->network_header = skb->data + offset; | |
| } | |
| static inline unsigned char *skb_mac_header(const struct sk_buff *skb) | |
| { | |
| return skb->mac_header; | |
| } | |
| static inline int skb_mac_header_was_set(const struct sk_buff *skb) | |
| { | |
| return skb->mac_header != NULL; | |
| } | |
| static inline void skb_reset_mac_header(struct sk_buff *skb) | |
| { | |
| skb->mac_header = skb->data; | |
| } | |
| static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) | |
| { | |
| skb->mac_header = skb->data + offset; | |
| } | |
| #endif /* NET_SKBUFF_DATA_USES_OFFSET */ | |
| static inline int skb_transport_offset(const struct sk_buff *skb) | |
| { | |
| return skb_transport_header(skb) - skb->data; | |
| } | |
| static inline u32 skb_network_header_len(const struct sk_buff *skb) | |
| { | |
| return skb->transport_header - skb->network_header; | |
| } | |
| static inline int skb_network_offset(const struct sk_buff *skb) | |
| { | |
| return skb_network_header(skb) - skb->data; | |
| } | |
| /* | |
| * CPUs often take a performance hit when accessing unaligned memory | |
| * locations. The actual performance hit varies, it can be small if the | |
| * hardware handles it or large if we have to take an exception and fix it | |
| * in software. | |
| * | |
| * Since an ethernet header is 14 bytes network drivers often end up with | |
| * the IP header at an unaligned offset. The IP header can be aligned by | |
| * shifting the start of the packet by 2 bytes. Drivers should do this | |
| * with: | |
| * | |
| * skb_reserve(NET_IP_ALIGN); | |
| * | |
| * The downside to this alignment of the IP header is that the DMA is now | |
| * unaligned. On some architectures the cost of an unaligned DMA is high | |
| * and this cost outweighs the gains made by aligning the IP header. | |
| * | |
| * Since this trade off varies between architectures, we allow NET_IP_ALIGN | |
| * to be overridden. | |
| */ | |
| #ifndef NET_IP_ALIGN | |
| #define NET_IP_ALIGN 2 | |
| #endif | |
| /* | |
| * The networking layer reserves some headroom in skb data (via | |
| * dev_alloc_skb). This is used to avoid having to reallocate skb data when | |
| * the header has to grow. In the default case, if the header has to grow | |
| * 16 bytes or less we avoid the reallocation. | |
| * | |
| * Unfortunately this headroom changes the DMA alignment of the resulting | |
| * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive | |
| * on some architectures. An architecture can override this value, | |
| * perhaps setting it to a cacheline in size (since that will maintain | |
| * cacheline alignment of the DMA). It must be a power of 2. | |
| * | |
| * Various parts of the networking layer expect at least 16 bytes of | |
| * headroom, you should not reduce this. | |
| */ | |
| #ifndef NET_SKB_PAD | |
| #define NET_SKB_PAD 16 | |
| #endif | |
| extern int ___pskb_trim(struct sk_buff *skb, unsigned int len); | |
| static inline void __skb_trim(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (unlikely(skb->data_len)) { | |
| WARN_ON(1); | |
| return; | |
| } | |
| skb->len = len; | |
| skb_set_tail_pointer(skb, len); | |
| } | |
| extern void skb_trim(struct sk_buff *skb, unsigned int len); | |
| static inline int __pskb_trim(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (skb->data_len) | |
| return ___pskb_trim(skb, len); | |
| __skb_trim(skb, len); | |
| return 0; | |
| } | |
| static inline int pskb_trim(struct sk_buff *skb, unsigned int len) | |
| { | |
| return (len < skb->len) ? __pskb_trim(skb, len) : 0; | |
| } | |
| /** | |
| * pskb_trim_unique - remove end from a paged unique (not cloned) buffer | |
| * @skb: buffer to alter | |
| * @len: new length | |
| * | |
| * This is identical to pskb_trim except that the caller knows that | |
| * the skb is not cloned so we should never get an error due to out- | |
| * of-memory. | |
| */ | |
| static inline void pskb_trim_unique(struct sk_buff *skb, unsigned int len) | |
| { | |
| int err = pskb_trim(skb, len); | |
| BUG_ON(err); | |
| } | |
| /** | |
| * skb_orphan - orphan a buffer | |
| * @skb: buffer to orphan | |
| * | |
| * If a buffer currently has an owner then we call the owner's | |
| * destructor function and make the @skb unowned. The buffer continues | |
| * to exist but is no longer charged to its former owner. | |
| */ | |
| static inline void skb_orphan(struct sk_buff *skb) | |
| { | |
| if (skb->destructor) | |
| skb->destructor(skb); | |
| skb->destructor = NULL; | |
| skb->sk = NULL; | |
| } | |
| /** | |
| * __skb_queue_purge - empty a list | |
| * @list: list to empty | |
| * | |
| * Delete all buffers on an &sk_buff list. Each buffer is removed from | |
| * the list and one reference dropped. This function does not take the | |
| * list lock and the caller must hold the relevant locks to use it. | |
| */ | |
| extern void skb_queue_purge(struct sk_buff_head *list); | |
| static inline void __skb_queue_purge(struct sk_buff_head *list) | |
| { | |
| struct sk_buff *skb; | |
| while ((skb = __skb_dequeue(list)) != NULL) | |
| kfree_skb(skb); | |
| } | |
| /** | |
| * __dev_alloc_skb - allocate an skbuff for receiving | |
| * @length: length to allocate | |
| * @gfp_mask: get_free_pages mask, passed to alloc_skb | |
| * | |
| * Allocate a new &sk_buff and assign it a usage count of one. The | |
| * buffer has unspecified headroom built in. Users should allocate | |
| * the headroom they think they need without accounting for the | |
| * built in space. The built in space is used for optimisations. | |
| * | |
| * %NULL is returned if there is no free memory. | |
| */ | |
| static inline struct sk_buff *__dev_alloc_skb(unsigned int length, | |
| gfp_t gfp_mask) | |
| { | |
| struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask); | |
| if (likely(skb)) | |
| skb_reserve(skb, NET_SKB_PAD); | |
| return skb; | |
| } | |
| extern struct sk_buff *dev_alloc_skb(unsigned int length); | |
| extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev, | |
| unsigned int length, gfp_t gfp_mask); | |
| /** | |
| * netdev_alloc_skb - allocate an skbuff for rx on a specific device | |
| * @dev: network device to receive on | |
| * @length: length to allocate | |
| * | |
| * Allocate a new &sk_buff and assign it a usage count of one. The | |
| * buffer has unspecified headroom built in. Users should allocate | |
| * the headroom they think they need without accounting for the | |
| * built in space. The built in space is used for optimisations. | |
| * | |
| * %NULL is returned if there is no free memory. Although this function | |
| * allocates memory it can be called from an interrupt. | |
| */ | |
| static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev, | |
| unsigned int length) | |
| { | |
| return __netdev_alloc_skb(dev, length, GFP_ATOMIC); | |
| } | |
| extern struct page *__netdev_alloc_page(struct net_device *dev, gfp_t gfp_mask); | |
| /** | |
| * netdev_alloc_page - allocate a page for ps-rx on a specific device | |
| * @dev: network device to receive on | |
| * | |
| * Allocate a new page node local to the specified device. | |
| * | |
| * %NULL is returned if there is no free memory. | |
| */ | |
| static inline struct page *netdev_alloc_page(struct net_device *dev) | |
| { | |
| return __netdev_alloc_page(dev, GFP_ATOMIC); | |
| } | |
| static inline void netdev_free_page(struct net_device *dev, struct page *page) | |
| { | |
| __free_page(page); | |
| } | |
| /** | |
| * skb_clone_writable - is the header of a clone writable | |
| * @skb: buffer to check | |
| * @len: length up to which to write | |
| * | |
| * Returns true if modifying the header part of the cloned buffer | |
| * does not requires the data to be copied. | |
| */ | |
| static inline int skb_clone_writable(struct sk_buff *skb, unsigned int len) | |
| { | |
| return !skb_header_cloned(skb) && | |
| skb_headroom(skb) + len <= skb->hdr_len; | |
| } | |
| static inline int __skb_cow(struct sk_buff *skb, unsigned int headroom, | |
| int cloned) | |
| { | |
| int delta = 0; | |
| if (headroom < NET_SKB_PAD) | |
| headroom = NET_SKB_PAD; | |
| if (headroom > skb_headroom(skb)) | |
| delta = headroom - skb_headroom(skb); | |
| if (delta || cloned) | |
| return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0, | |
| GFP_ATOMIC); | |
| return 0; | |
| } | |
| /** | |
| * skb_cow - copy header of skb when it is required | |
| * @skb: buffer to cow | |
| * @headroom: needed headroom | |
| * | |
| * If the skb passed lacks sufficient headroom or its data part | |
| * is shared, data is reallocated. If reallocation fails, an error | |
| * is returned and original skb is not changed. | |
| * | |
| * The result is skb with writable area skb->head...skb->tail | |
| * and at least @headroom of space at head. | |
| */ | |
| static inline int skb_cow(struct sk_buff *skb, unsigned int headroom) | |
| { | |
| return __skb_cow(skb, headroom, skb_cloned(skb)); | |
| } | |
| /** | |
| * skb_cow_head - skb_cow but only making the head writable | |
| * @skb: buffer to cow | |
| * @headroom: needed headroom | |
| * | |
| * This function is identical to skb_cow except that we replace the | |
| * skb_cloned check by skb_header_cloned. It should be used when | |
| * you only need to push on some header and do not need to modify | |
| * the data. | |
| */ | |
| static inline int skb_cow_head(struct sk_buff *skb, unsigned int headroom) | |
| { | |
| return __skb_cow(skb, headroom, skb_header_cloned(skb)); | |
| } | |
| /** | |
| * skb_padto - pad an skbuff up to a minimal size | |
| * @skb: buffer to pad | |
| * @len: minimal length | |
| * | |
| * Pads up a buffer to ensure the trailing bytes exist and are | |
| * blanked. If the buffer already contains sufficient data it | |
| * is untouched. Otherwise it is extended. Returns zero on | |
| * success. The skb is freed on error. | |
| */ | |
| static inline int skb_padto(struct sk_buff *skb, unsigned int len) | |
| { | |
| unsigned int size = skb->len; | |
| if (likely(size >= len)) | |
| return 0; | |
| return skb_pad(skb, len - size); | |
| } | |
| static inline int skb_add_data(struct sk_buff *skb, | |
| char __user *from, int copy) | |
| { | |
| const int off = skb->len; | |
| if (skb->ip_summed == CHECKSUM_NONE) { | |
| int err = 0; | |
| __wsum csum = csum_and_copy_from_user(from, skb_put(skb, copy), | |
| copy, 0, &err); | |
| if (!err) { | |
| skb->csum = csum_block_add(skb->csum, csum, off); | |
| return 0; | |
| } | |
| } else if (!copy_from_user(skb_put(skb, copy), from, copy)) | |
| return 0; | |
| __skb_trim(skb, off); | |
| return -EFAULT; | |
| } | |
| static inline int skb_can_coalesce(struct sk_buff *skb, int i, | |
| struct page *page, int off) | |
| { | |
| if (i) { | |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; | |
| return page == frag->page && | |
| off == frag->page_offset + frag->size; | |
| } | |
| return 0; | |
| } | |
| static inline int __skb_linearize(struct sk_buff *skb) | |
| { | |
| return __pskb_pull_tail(skb, skb->data_len) ? 0 : -ENOMEM; | |
| } | |
| /** | |
| * skb_linearize - convert paged skb to linear one | |
| * @skb: buffer to linarize | |
| * | |
| * If there is no free memory -ENOMEM is returned, otherwise zero | |
| * is returned and the old skb data released. | |
| */ | |
| static inline int skb_linearize(struct sk_buff *skb) | |
| { | |
| return skb_is_nonlinear(skb) ? __skb_linearize(skb) : 0; | |
| } | |
| /** | |
| * skb_linearize_cow - make sure skb is linear and writable | |
| * @skb: buffer to process | |
| * | |
| * If there is no free memory -ENOMEM is returned, otherwise zero | |
| * is returned and the old skb data released. | |
| */ | |
| static inline int skb_linearize_cow(struct sk_buff *skb) | |
| { | |
| return skb_is_nonlinear(skb) || skb_cloned(skb) ? | |
| __skb_linearize(skb) : 0; | |
| } | |
| /** | |
| * skb_postpull_rcsum - update checksum for received skb after pull | |
| * @skb: buffer to update | |
| * @start: start of data before pull | |
| * @len: length of data pulled | |
| * | |
| * After doing a pull on a received packet, you need to call this to | |
| * update the CHECKSUM_COMPLETE checksum, or set ip_summed to | |
| * CHECKSUM_NONE so that it can be recomputed from scratch. | |
| */ | |
| static inline void skb_postpull_rcsum(struct sk_buff *skb, | |
| const void *start, unsigned int len) | |
| { | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) | |
| skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0)); | |
| } | |
| unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); | |
| /** | |
| * pskb_trim_rcsum - trim received skb and update checksum | |
| * @skb: buffer to trim | |
| * @len: new length | |
| * | |
| * This is exactly the same as pskb_trim except that it ensures the | |
| * checksum of received packets are still valid after the operation. | |
| */ | |
| static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (likely(len >= skb->len)) | |
| return 0; | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) | |
| skb->ip_summed = CHECKSUM_NONE; | |
| return __pskb_trim(skb, len); | |
| } | |
| #define skb_queue_walk(queue, skb) \ | |
| for (skb = (queue)->next; \ | |
| prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ | |
| skb = skb->next) | |
| #define skb_queue_walk_safe(queue, skb, tmp) \ | |
| for (skb = (queue)->next, tmp = skb->next; \ | |
| skb != (struct sk_buff *)(queue); \ | |
| skb = tmp, tmp = skb->next) | |
| #define skb_queue_walk_from(queue, skb) \ | |
| for (; prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ | |
| skb = skb->next) | |
| #define skb_queue_walk_from_safe(queue, skb, tmp) \ | |
| for (tmp = skb->next; \ | |
| skb != (struct sk_buff *)(queue); \ | |
| skb = tmp, tmp = skb->next) | |
| #define skb_queue_reverse_walk(queue, skb) \ | |
| for (skb = (queue)->prev; \ | |
| prefetch(skb->prev), (skb != (struct sk_buff *)(queue)); \ | |
| skb = skb->prev) | |
| extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, | |
| int *peeked, int *err); | |
| extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, | |
| int noblock, int *err); | |
| extern unsigned int datagram_poll(struct file *file, struct socket *sock, | |
| struct poll_table_struct *wait); | |
| extern int skb_copy_datagram_iovec(const struct sk_buff *from, | |
| int offset, struct iovec *to, | |
| int size); | |
| extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, | |
| int hlen, | |
| struct iovec *iov); | |
| extern int skb_copy_datagram_from_iovec(struct sk_buff *skb, | |
| int offset, | |
| struct iovec *from, | |
| int len); | |
| extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); | |
| extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, | |
| unsigned int flags); | |
| extern __wsum skb_checksum(const struct sk_buff *skb, int offset, | |
| int len, __wsum csum); | |
| extern int skb_copy_bits(const struct sk_buff *skb, int offset, | |
| void *to, int len); | |
| extern int skb_store_bits(struct sk_buff *skb, int offset, | |
| const void *from, int len); | |
| extern __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, | |
| int offset, u8 *to, int len, | |
| __wsum csum); | |
| extern int skb_splice_bits(struct sk_buff *skb, | |
| unsigned int offset, | |
| struct pipe_inode_info *pipe, | |
| unsigned int len, | |
| unsigned int flags); | |
| extern void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to); | |
| extern void skb_split(struct sk_buff *skb, | |
| struct sk_buff *skb1, const u32 len); | |
| extern struct sk_buff *skb_segment(struct sk_buff *skb, int features); | |
| static inline void *skb_header_pointer(const struct sk_buff *skb, int offset, | |
| int len, void *buffer) | |
| { | |
| int hlen = skb_headlen(skb); | |
| if (hlen - offset >= len) | |
| return skb->data + offset; | |
| if (skb_copy_bits(skb, offset, buffer, len) < 0) | |
| return NULL; | |
| return buffer; | |
| } | |
| static inline void skb_copy_from_linear_data(const struct sk_buff *skb, | |
| void *to, | |
| const unsigned int len) | |
| { | |
| memcpy(to, skb->data, len); | |
| } | |
| static inline void skb_copy_from_linear_data_offset(const struct sk_buff *skb, | |
| const int offset, void *to, | |
| const unsigned int len) | |
| { | |
| memcpy(to, skb->data + offset, len); | |
| } | |
| static inline void skb_copy_to_linear_data(struct sk_buff *skb, | |
| const void *from, | |
| const unsigned int len) | |
| { | |
| memcpy(skb->data, from, len); | |
| } | |
| static inline void skb_copy_to_linear_data_offset(struct sk_buff *skb, | |
| const int offset, | |
| const void *from, | |
| const unsigned int len) | |
| { | |
| memcpy(skb->data + offset, from, len); | |
| } | |
| extern void skb_init(void); | |
| /** | |
| * skb_get_timestamp - get timestamp from a skb | |
| * @skb: skb to get stamp from | |
| * @stamp: pointer to struct timeval to store stamp in | |
| * | |
| * Timestamps are stored in the skb as offsets to a base timestamp. | |
| * This function converts the offset back to a struct timeval and stores | |
| * it in stamp. | |
| */ | |
| static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp) | |
| { | |
| *stamp = ktime_to_timeval(skb->tstamp); | |
| } | |
| static inline void __net_timestamp(struct sk_buff *skb) | |
| { | |
| skb->tstamp = ktime_get_real(); | |
| } | |
| static inline ktime_t net_timedelta(ktime_t t) | |
| { | |
| return ktime_sub(ktime_get_real(), t); | |
| } | |
| static inline ktime_t net_invalid_timestamp(void) | |
| { | |
| return ktime_set(0, 0); | |
| } | |
| extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len); | |
| extern __sum16 __skb_checksum_complete(struct sk_buff *skb); | |
| static inline int skb_csum_unnecessary(const struct sk_buff *skb) | |
| { | |
| return skb->ip_summed & CHECKSUM_UNNECESSARY; | |
| } | |
| /** | |
| * skb_checksum_complete - Calculate checksum of an entire packet | |
| * @skb: packet to process | |
| * | |
| * This function calculates the checksum over the entire packet plus | |
| * the value of skb->csum. The latter can be used to supply the | |
| * checksum of a pseudo header as used by TCP/UDP. It returns the | |
| * checksum. | |
| * | |
| * For protocols that contain complete checksums such as ICMP/TCP/UDP, | |
| * this function can be used to verify that checksum on received | |
| * packets. In that case the function should return zero if the | |
| * checksum is correct. In particular, this function will return zero | |
| * if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the | |
| * hardware has already verified the correctness of the checksum. | |
| */ | |
| static inline __sum16 skb_checksum_complete(struct sk_buff *skb) | |
| { | |
| return skb_csum_unnecessary(skb) ? | |
| 0 : __skb_checksum_complete(skb); | |
| } | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| extern void nf_conntrack_destroy(struct nf_conntrack *nfct); | |
| static inline void nf_conntrack_put(struct nf_conntrack *nfct) | |
| { | |
| if (nfct && atomic_dec_and_test(&nfct->use)) | |
| nf_conntrack_destroy(nfct); | |
| } | |
| static inline void nf_conntrack_get(struct nf_conntrack *nfct) | |
| { | |
| if (nfct) | |
| atomic_inc(&nfct->use); | |
| } | |
| static inline void nf_conntrack_get_reasm(struct sk_buff *skb) | |
| { | |
| if (skb) | |
| atomic_inc(&skb->users); | |
| } | |
| static inline void nf_conntrack_put_reasm(struct sk_buff *skb) | |
| { | |
| if (skb) | |
| kfree_skb(skb); | |
| } | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge) | |
| { | |
| if (nf_bridge && atomic_dec_and_test(&nf_bridge->use)) | |
| kfree(nf_bridge); | |
| } | |
| static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge) | |
| { | |
| if (nf_bridge) | |
| atomic_inc(&nf_bridge->use); | |
| } | |
| #endif /* CONFIG_BRIDGE_NETFILTER */ | |
| static inline void nf_reset(struct sk_buff *skb) | |
| { | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| nf_conntrack_put(skb->nfct); | |
| skb->nfct = NULL; | |
| nf_conntrack_put_reasm(skb->nfct_reasm); | |
| skb->nfct_reasm = NULL; | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| nf_bridge_put(skb->nf_bridge); | |
| skb->nf_bridge = NULL; | |
| #endif | |
| } | |
| /* Note: This doesn't put any conntrack and bridge info in dst. */ | |
| static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src) | |
| { | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| dst->nfct = src->nfct; | |
| nf_conntrack_get(src->nfct); | |
| dst->nfctinfo = src->nfctinfo; | |
| dst->nfct_reasm = src->nfct_reasm; | |
| nf_conntrack_get_reasm(src->nfct_reasm); | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| dst->nf_bridge = src->nf_bridge; | |
| nf_bridge_get(src->nf_bridge); | |
| #endif | |
| } | |
| static inline void nf_copy(struct sk_buff *dst, const struct sk_buff *src) | |
| { | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| nf_conntrack_put(dst->nfct); | |
| nf_conntrack_put_reasm(dst->nfct_reasm); | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| nf_bridge_put(dst->nf_bridge); | |
| #endif | |
| __nf_copy(dst, src); | |
| } | |
| #ifdef CONFIG_NETWORK_SECMARK | |
| static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from) | |
| { | |
| to->secmark = from->secmark; | |
| } | |
| static inline void skb_init_secmark(struct sk_buff *skb) | |
| { | |
| skb->secmark = 0; | |
| } | |
| #else | |
| static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from) | |
| { } | |
| static inline void skb_init_secmark(struct sk_buff *skb) | |
| { } | |
| #endif | |
| static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping) | |
| { | |
| skb->queue_mapping = queue_mapping; | |
| } | |
| static inline u16 skb_get_queue_mapping(struct sk_buff *skb) | |
| { | |
| return skb->queue_mapping; | |
| } | |
| static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from) | |
| { | |
| to->queue_mapping = from->queue_mapping; | |
| } | |
| static inline int skb_is_gso(const struct sk_buff *skb) | |
| { | |
| return skb_shinfo(skb)->gso_size; | |
| } | |
| static inline int skb_is_gso_v6(const struct sk_buff *skb) | |
| { | |
| return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; | |
| } | |
| extern void __skb_warn_lro_forwarding(const struct sk_buff *skb); | |
| static inline bool skb_warn_if_lro(const struct sk_buff *skb) | |
| { | |
| /* LRO sets gso_size but not gso_type, whereas if GSO is really | |
| * wanted then gso_type will be set. */ | |
| struct skb_shared_info *shinfo = skb_shinfo(skb); | |
| if (shinfo->gso_size != 0 && unlikely(shinfo->gso_type == 0)) { | |
| __skb_warn_lro_forwarding(skb); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static inline void skb_forward_csum(struct sk_buff *skb) | |
| { | |
| /* Unfortunately we don't support this one. Any brave souls? */ | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) | |
| skb->ip_summed = CHECKSUM_NONE; | |
| } | |
| bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off); | |
| #endif /* __KERNEL__ */ | |
| #endif /* _LINUX_SKBUFF_H */ |