| /* |
| * Intel Haswell SST DSP driver |
| * |
| * Copyright (C) 2013, Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/sched.h> |
| #include <linux/export.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/pci.h> |
| #include <linux/firmware.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "../common/sst-dsp.h" |
| #include "../common/sst-dsp-priv.h" |
| #include "../haswell/sst-haswell-ipc.h" |
| |
| #include <trace/events/hswadsp.h> |
| |
| #define SST_HSW_FW_SIGNATURE_SIZE 4 |
| #define SST_HSW_FW_SIGN "$SST" |
| #define SST_HSW_FW_LIB_SIGN "$LIB" |
| |
| #define SST_WPT_SHIM_OFFSET 0xFB000 |
| #define SST_LP_SHIM_OFFSET 0xE7000 |
| #define SST_WPT_IRAM_OFFSET 0xA0000 |
| #define SST_LP_IRAM_OFFSET 0x80000 |
| #define SST_WPT_DSP_DRAM_OFFSET 0x400000 |
| #define SST_WPT_DSP_IRAM_OFFSET 0x00000 |
| #define SST_LPT_DSP_DRAM_OFFSET 0x400000 |
| #define SST_LPT_DSP_IRAM_OFFSET 0x00000 |
| |
| #define SST_SHIM_PM_REG 0x84 |
| |
| #define SST_HSW_IRAM 1 |
| #define SST_HSW_DRAM 2 |
| #define SST_HSW_REGS 3 |
| |
| struct dma_block_info { |
| __le32 type; /* IRAM/DRAM */ |
| __le32 size; /* Bytes */ |
| __le32 ram_offset; /* Offset in I/DRAM */ |
| __le32 rsvd; /* Reserved field */ |
| } __attribute__((packed)); |
| |
| struct fw_module_info { |
| __le32 persistent_size; |
| __le32 scratch_size; |
| } __attribute__((packed)); |
| |
| struct fw_header { |
| unsigned char signature[SST_HSW_FW_SIGNATURE_SIZE]; /* FW signature */ |
| __le32 file_size; /* size of fw minus this header */ |
| __le32 modules; /* # of modules */ |
| __le32 file_format; /* version of header format */ |
| __le32 reserved[4]; |
| } __attribute__((packed)); |
| |
| struct fw_module_header { |
| unsigned char signature[SST_HSW_FW_SIGNATURE_SIZE]; /* module signature */ |
| __le32 mod_size; /* size of module */ |
| __le32 blocks; /* # of blocks */ |
| __le16 padding; |
| __le16 type; /* codec type, pp lib */ |
| __le32 entry_point; |
| struct fw_module_info info; |
| } __attribute__((packed)); |
| |
| static void hsw_free(struct sst_dsp *sst); |
| |
| static int hsw_parse_module(struct sst_dsp *dsp, struct sst_fw *fw, |
| struct fw_module_header *module) |
| { |
| struct dma_block_info *block; |
| struct sst_module *mod; |
| struct sst_module_template template; |
| int count, ret; |
| void __iomem *ram; |
| int type = le16_to_cpu(module->type); |
| int entry_point = le32_to_cpu(module->entry_point); |
| |
| /* TODO: allowed module types need to be configurable */ |
| if (type != SST_HSW_MODULE_BASE_FW && |
| type != SST_HSW_MODULE_PCM_SYSTEM && |
| type != SST_HSW_MODULE_PCM && |
| type != SST_HSW_MODULE_PCM_REFERENCE && |
| type != SST_HSW_MODULE_PCM_CAPTURE && |
| type != SST_HSW_MODULE_WAVES && |
| type != SST_HSW_MODULE_LPAL) |
| return 0; |
| |
| dev_dbg(dsp->dev, "new module sign 0x%s size 0x%x blocks 0x%x type 0x%x\n", |
| module->signature, module->mod_size, |
| module->blocks, type); |
| dev_dbg(dsp->dev, " entrypoint 0x%x\n", entry_point); |
| dev_dbg(dsp->dev, " persistent 0x%x scratch 0x%x\n", |
| module->info.persistent_size, module->info.scratch_size); |
| |
| memset(&template, 0, sizeof(template)); |
| template.id = type; |
| template.entry = entry_point - 4; |
| template.persistent_size = le32_to_cpu(module->info.persistent_size); |
| template.scratch_size = le32_to_cpu(module->info.scratch_size); |
| |
| mod = sst_module_new(fw, &template, NULL); |
| if (mod == NULL) |
| return -ENOMEM; |
| |
| block = (void *)module + sizeof(*module); |
| |
| for (count = 0; count < le32_to_cpu(module->blocks); count++) { |
| |
| if (le32_to_cpu(block->size) <= 0) { |
| dev_err(dsp->dev, |
| "error: block %d size invalid\n", count); |
| sst_module_free(mod); |
| return -EINVAL; |
| } |
| |
| switch (le32_to_cpu(block->type)) { |
| case SST_HSW_IRAM: |
| ram = dsp->addr.lpe; |
| mod->offset = le32_to_cpu(block->ram_offset) + |
| dsp->addr.iram_offset; |
| mod->type = SST_MEM_IRAM; |
| break; |
| case SST_HSW_DRAM: |
| case SST_HSW_REGS: |
| ram = dsp->addr.lpe; |
| mod->offset = le32_to_cpu(block->ram_offset); |
| mod->type = SST_MEM_DRAM; |
| break; |
| default: |
| dev_err(dsp->dev, "error: bad type 0x%x for block 0x%x\n", |
| block->type, count); |
| sst_module_free(mod); |
| return -EINVAL; |
| } |
| |
| mod->size = le32_to_cpu(block->size); |
| mod->data = (void *)block + sizeof(*block); |
| mod->data_offset = mod->data - fw->dma_buf; |
| |
| dev_dbg(dsp->dev, "module block %d type 0x%x " |
| "size 0x%x ==> ram %p offset 0x%x\n", |
| count, mod->type, block->size, ram, |
| block->ram_offset); |
| |
| ret = sst_module_alloc_blocks(mod); |
| if (ret < 0) { |
| dev_err(dsp->dev, "error: could not allocate blocks for module %d\n", |
| count); |
| sst_module_free(mod); |
| return ret; |
| } |
| |
| block = (void *)block + sizeof(*block) + |
| le32_to_cpu(block->size); |
| } |
| mod->state = SST_MODULE_STATE_LOADED; |
| |
| return 0; |
| } |
| |
| static int hsw_parse_fw_image(struct sst_fw *sst_fw) |
| { |
| struct fw_header *header; |
| struct fw_module_header *module; |
| struct sst_dsp *dsp = sst_fw->dsp; |
| int ret, count; |
| |
| /* Read the header information from the data pointer */ |
| header = (struct fw_header *)sst_fw->dma_buf; |
| |
| /* verify FW */ |
| if ((strncmp(header->signature, SST_HSW_FW_SIGN, 4) != 0) || |
| (sst_fw->size != |
| le32_to_cpu(header->file_size) + sizeof(*header))) { |
| dev_err(dsp->dev, "error: invalid fw sign/filesize mismatch\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dsp->dev, "header size=0x%x modules=0x%x fmt=0x%x size=%zu\n", |
| header->file_size, header->modules, |
| header->file_format, sizeof(*header)); |
| |
| /* parse each module */ |
| module = (void *)sst_fw->dma_buf + sizeof(*header); |
| for (count = 0; count < le32_to_cpu(header->modules); count++) { |
| |
| /* module */ |
| ret = hsw_parse_module(dsp, sst_fw, module); |
| if (ret < 0) { |
| dev_err(dsp->dev, "error: invalid module %d\n", count); |
| return ret; |
| } |
| module = (void *)module + sizeof(*module) + |
| le32_to_cpu(module->mod_size); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t hsw_irq(int irq, void *context) |
| { |
| struct sst_dsp *sst = (struct sst_dsp *) context; |
| u32 isr; |
| int ret = IRQ_NONE; |
| |
| spin_lock(&sst->spinlock); |
| |
| /* Interrupt arrived, check src */ |
| isr = sst_dsp_shim_read_unlocked(sst, SST_ISRX); |
| if (isr & SST_ISRX_DONE) { |
| trace_sst_irq_done(isr, |
| sst_dsp_shim_read_unlocked(sst, SST_IMRX)); |
| |
| /* Mask Done interrupt before return */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_IMRX, |
| SST_IMRX_DONE, SST_IMRX_DONE); |
| ret = IRQ_WAKE_THREAD; |
| } |
| |
| if (isr & SST_ISRX_BUSY) { |
| trace_sst_irq_busy(isr, |
| sst_dsp_shim_read_unlocked(sst, SST_IMRX)); |
| |
| /* Mask Busy interrupt before return */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_IMRX, |
| SST_IMRX_BUSY, SST_IMRX_BUSY); |
| ret = IRQ_WAKE_THREAD; |
| } |
| |
| spin_unlock(&sst->spinlock); |
| return ret; |
| } |
| |
| static void hsw_set_dsp_D3(struct sst_dsp *sst) |
| { |
| u32 val; |
| u32 reg; |
| |
| /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| /* enable power gating and switch off DRAM & IRAM blocks */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); |
| val |= SST_VDRTCL0_DSRAMPGE_MASK | |
| SST_VDRTCL0_ISRAMPGE_MASK; |
| val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD); |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| /* switch off audio PLL */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| val |= SST_VDRTCL2_APLLSE_MASK; |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| /* disable MCLK(clkctl.smos = 0) */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, |
| SST_CLKCTL_MASK, 0); |
| |
| /* Set D3 state, delay 50 us */ |
| val = readl(sst->addr.pci_cfg + SST_PMCS); |
| val |= SST_PMCS_PS_MASK; |
| writel(val, sst->addr.pci_cfg + SST_PMCS); |
| udelay(50); |
| |
| /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| udelay(50); |
| |
| } |
| |
| static void hsw_reset(struct sst_dsp *sst) |
| { |
| /* put DSP into reset and stall */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, |
| SST_CSR_RST | SST_CSR_STALL, |
| SST_CSR_RST | SST_CSR_STALL); |
| |
| /* keep in reset for 10ms */ |
| mdelay(10); |
| |
| /* take DSP out of reset and keep stalled for FW loading */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, |
| SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL); |
| } |
| |
| static int hsw_set_dsp_D0(struct sst_dsp *sst) |
| { |
| int tries = 10; |
| u32 reg, fw_dump_bit; |
| |
| /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| /* Disable D3PG (VDRTCTL0.D3PGD = 1) */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); |
| reg |= SST_VDRTCL0_D3PGD; |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| /* Set D0 state */ |
| reg = readl(sst->addr.pci_cfg + SST_PMCS); |
| reg &= ~SST_PMCS_PS_MASK; |
| writel(reg, sst->addr.pci_cfg + SST_PMCS); |
| |
| /* check that ADSP shim is enabled */ |
| while (tries--) { |
| reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK; |
| if (reg == 0) |
| goto finish; |
| |
| msleep(1); |
| } |
| |
| return -ENODEV; |
| |
| finish: |
| /* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, |
| SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0); |
| |
| /* stall DSP core, set clk to 192/96Mhz */ |
| sst_dsp_shim_update_bits_unlocked(sst, |
| SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK, |
| SST_CSR_STALL | SST_CSR_DCS(4)); |
| |
| /* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, |
| SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0, |
| SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0); |
| |
| /* Stall and reset core, set CSR */ |
| hsw_reset(sst); |
| |
| /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| udelay(50); |
| |
| /* switch on audio PLL */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| reg &= ~SST_VDRTCL2_APLLSE_MASK; |
| writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| /* set default power gating control, enable power gating control for all blocks. that is, |
| can't be accessed, please enable each block before accessing. */ |
| reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); |
| reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK; |
| /* for D0, always enable the block(DSRAM[0]) used for FW dump */ |
| fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT; |
| writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| |
| /* disable DMA finish function for SSP0 & SSP1 */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1, |
| SST_CSR2_SDFD_SSP1); |
| |
| /* set on-demond mode on engine 0,1 for all channels */ |
| sst_dsp_shim_update_bits(sst, SST_HMDC, |
| SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH, |
| SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH); |
| |
| /* Enable Interrupt from both sides */ |
| sst_dsp_shim_update_bits(sst, SST_IMRX, (SST_IMRX_BUSY | SST_IMRX_DONE), |
| 0x0); |
| sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY | |
| SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0); |
| |
| /* clear IPC registers */ |
| sst_dsp_shim_write(sst, SST_IPCX, 0x0); |
| sst_dsp_shim_write(sst, SST_IPCD, 0x0); |
| sst_dsp_shim_write(sst, 0x80, 0x6); |
| sst_dsp_shim_write(sst, 0xe0, 0x300a); |
| |
| return 0; |
| } |
| |
| static void hsw_boot(struct sst_dsp *sst) |
| { |
| /* set oportunistic mode on engine 0,1 for all channels */ |
| sst_dsp_shim_update_bits(sst, SST_HMDC, |
| SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH, 0); |
| |
| /* set DSP to RUN */ |
| sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_STALL, 0x0); |
| } |
| |
| static void hsw_stall(struct sst_dsp *sst) |
| { |
| /* stall DSP */ |
| sst_dsp_shim_update_bits(sst, SST_CSR, |
| SST_CSR_24MHZ_LPCS | SST_CSR_STALL, |
| SST_CSR_STALL | SST_CSR_24MHZ_LPCS); |
| } |
| |
| static void hsw_sleep(struct sst_dsp *sst) |
| { |
| dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n"); |
| |
| /* put DSP into reset and stall */ |
| sst_dsp_shim_update_bits(sst, SST_CSR, |
| SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL, |
| SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS); |
| |
| hsw_set_dsp_D3(sst); |
| dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n"); |
| } |
| |
| static int hsw_wake(struct sst_dsp *sst) |
| { |
| int ret; |
| |
| dev_dbg(sst->dev, "HSW_PM dsp runtime resume\n"); |
| |
| ret = hsw_set_dsp_D0(sst); |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(sst->dev, "HSW_PM dsp runtime resume exit\n"); |
| |
| return 0; |
| } |
| |
| struct sst_adsp_memregion { |
| u32 start; |
| u32 end; |
| int blocks; |
| enum sst_mem_type type; |
| }; |
| |
| /* lynx point ADSP mem regions */ |
| static const struct sst_adsp_memregion lp_region[] = { |
| {0x00000, 0x40000, 8, SST_MEM_DRAM}, /* D-SRAM0 - 8 * 32kB */ |
| {0x40000, 0x80000, 8, SST_MEM_DRAM}, /* D-SRAM1 - 8 * 32kB */ |
| {0x80000, 0xE0000, 12, SST_MEM_IRAM}, /* I-SRAM - 12 * 32kB */ |
| }; |
| |
| /* wild cat point ADSP mem regions */ |
| static const struct sst_adsp_memregion wpt_region[] = { |
| {0x00000, 0xA0000, 20, SST_MEM_DRAM}, /* D-SRAM0,D-SRAM1,D-SRAM2 - 20 * 32kB */ |
| {0xA0000, 0xF0000, 10, SST_MEM_IRAM}, /* I-SRAM - 10 * 32kB */ |
| }; |
| |
| static int hsw_acpi_resource_map(struct sst_dsp *sst, struct sst_pdata *pdata) |
| { |
| /* ADSP DRAM & IRAM */ |
| sst->addr.lpe_base = pdata->lpe_base; |
| sst->addr.lpe = ioremap(pdata->lpe_base, pdata->lpe_size); |
| if (!sst->addr.lpe) |
| return -ENODEV; |
| |
| /* ADSP PCI MMIO config space */ |
| sst->addr.pci_cfg = ioremap(pdata->pcicfg_base, pdata->pcicfg_size); |
| if (!sst->addr.pci_cfg) { |
| iounmap(sst->addr.lpe); |
| return -ENODEV; |
| } |
| |
| /* SST Shim */ |
| sst->addr.shim = sst->addr.lpe + sst->addr.shim_offset; |
| return 0; |
| } |
| |
| struct sst_sram_shift { |
| u32 dev_id; /* SST Device IDs */ |
| u32 iram_shift; |
| u32 dram_shift; |
| }; |
| |
| static const struct sst_sram_shift sram_shift[] = { |
| {SST_DEV_ID_LYNX_POINT, 6, 16}, /* lp */ |
| {SST_DEV_ID_WILDCAT_POINT, 2, 12}, /* wpt */ |
| }; |
| |
| static u32 hsw_block_get_bit(struct sst_mem_block *block) |
| { |
| u32 bit = 0, shift = 0, index; |
| struct sst_dsp *sst = block->dsp; |
| |
| for (index = 0; index < ARRAY_SIZE(sram_shift); index++) { |
| if (sram_shift[index].dev_id == sst->id) |
| break; |
| } |
| |
| if (index < ARRAY_SIZE(sram_shift)) { |
| switch (block->type) { |
| case SST_MEM_DRAM: |
| shift = sram_shift[index].dram_shift; |
| break; |
| case SST_MEM_IRAM: |
| shift = sram_shift[index].iram_shift; |
| break; |
| default: |
| shift = 0; |
| } |
| } else |
| shift = 0; |
| |
| bit = 1 << (block->index + shift); |
| |
| return bit; |
| } |
| |
| /*dummy read a SRAM block.*/ |
| static void sst_mem_block_dummy_read(struct sst_mem_block *block) |
| { |
| u32 size; |
| u8 tmp_buf[4]; |
| struct sst_dsp *sst = block->dsp; |
| |
| size = block->size > 4 ? 4 : block->size; |
| memcpy_fromio(tmp_buf, sst->addr.lpe + block->offset, size); |
| } |
| |
| /* enable 32kB memory block - locks held by caller */ |
| static int hsw_block_enable(struct sst_mem_block *block) |
| { |
| struct sst_dsp *sst = block->dsp; |
| u32 bit, val; |
| |
| if (block->users++ > 0) |
| return 0; |
| |
| dev_dbg(block->dsp->dev, " enabled block %d:%d at offset 0x%x\n", |
| block->type, block->index, block->offset); |
| |
| /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| val &= ~SST_VDRTCL2_DCLCGE; |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); |
| bit = hsw_block_get_bit(block); |
| writel(val & ~bit, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| /* wait 18 DSP clock ticks */ |
| udelay(10); |
| |
| /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| val |= SST_VDRTCL2_DCLCGE; |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| udelay(50); |
| |
| /*add a dummy read before the SRAM block is written, otherwise the writing may miss bytes sometimes.*/ |
| sst_mem_block_dummy_read(block); |
| return 0; |
| } |
| |
| /* disable 32kB memory block - locks held by caller */ |
| static int hsw_block_disable(struct sst_mem_block *block) |
| { |
| struct sst_dsp *sst = block->dsp; |
| u32 bit, val; |
| |
| if (--block->users > 0) |
| return 0; |
| |
| dev_dbg(block->dsp->dev, " disabled block %d:%d at offset 0x%x\n", |
| block->type, block->index, block->offset); |
| |
| /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| val &= ~SST_VDRTCL2_DCLCGE; |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); |
| bit = hsw_block_get_bit(block); |
| /* don't disable DSRAM[0], keep it always enable for FW dump*/ |
| if (bit != (1 << SST_VDRTCL0_DSRAMPGE_SHIFT)) |
| writel(val | bit, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| /* wait 18 DSP clock ticks */ |
| udelay(10); |
| |
| /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ |
| val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); |
| val |= SST_VDRTCL2_DCLCGE; |
| writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); |
| |
| udelay(50); |
| |
| return 0; |
| } |
| |
| static const struct sst_block_ops sst_hsw_ops = { |
| .enable = hsw_block_enable, |
| .disable = hsw_block_disable, |
| }; |
| |
| static int hsw_init(struct sst_dsp *sst, struct sst_pdata *pdata) |
| { |
| const struct sst_adsp_memregion *region; |
| struct device *dev; |
| int ret = -ENODEV, i, j, region_count; |
| u32 offset, size, fw_dump_bit; |
| |
| dev = sst->dma_dev; |
| |
| switch (sst->id) { |
| case SST_DEV_ID_LYNX_POINT: |
| region = lp_region; |
| region_count = ARRAY_SIZE(lp_region); |
| sst->addr.iram_offset = SST_LP_IRAM_OFFSET; |
| sst->addr.dsp_iram_offset = SST_LPT_DSP_IRAM_OFFSET; |
| sst->addr.dsp_dram_offset = SST_LPT_DSP_DRAM_OFFSET; |
| sst->addr.shim_offset = SST_LP_SHIM_OFFSET; |
| break; |
| case SST_DEV_ID_WILDCAT_POINT: |
| region = wpt_region; |
| region_count = ARRAY_SIZE(wpt_region); |
| sst->addr.iram_offset = SST_WPT_IRAM_OFFSET; |
| sst->addr.dsp_iram_offset = SST_WPT_DSP_IRAM_OFFSET; |
| sst->addr.dsp_dram_offset = SST_WPT_DSP_DRAM_OFFSET; |
| sst->addr.shim_offset = SST_WPT_SHIM_OFFSET; |
| break; |
| default: |
| dev_err(dev, "error: failed to get mem resources\n"); |
| return ret; |
| } |
| |
| ret = hsw_acpi_resource_map(sst, pdata); |
| if (ret < 0) { |
| dev_err(dev, "error: failed to map resources\n"); |
| return ret; |
| } |
| |
| /* enable the DSP SHIM */ |
| ret = hsw_set_dsp_D0(sst); |
| if (ret < 0) { |
| dev_err(dev, "error: failed to set DSP D0 and reset SHIM\n"); |
| return ret; |
| } |
| |
| ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(31)); |
| if (ret) |
| return ret; |
| |
| |
| /* register DSP memory blocks - ideally we should get this from ACPI */ |
| for (i = 0; i < region_count; i++) { |
| offset = region[i].start; |
| size = (region[i].end - region[i].start) / region[i].blocks; |
| |
| /* register individual memory blocks */ |
| for (j = 0; j < region[i].blocks; j++) { |
| sst_mem_block_register(sst, offset, size, |
| region[i].type, &sst_hsw_ops, j, sst); |
| offset += size; |
| } |
| } |
| |
| /* always enable the block(DSRAM[0]) used for FW dump */ |
| fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT; |
| /* set default power gating control, enable power gating control for all blocks. that is, |
| can't be accessed, please enable each block before accessing. */ |
| writel(0xffffffff & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0); |
| |
| return 0; |
| } |
| |
| static void hsw_free(struct sst_dsp *sst) |
| { |
| sst_mem_block_unregister_all(sst); |
| iounmap(sst->addr.lpe); |
| iounmap(sst->addr.pci_cfg); |
| } |
| |
| struct sst_ops haswell_ops = { |
| .reset = hsw_reset, |
| .boot = hsw_boot, |
| .stall = hsw_stall, |
| .wake = hsw_wake, |
| .sleep = hsw_sleep, |
| .write = sst_shim32_write, |
| .read = sst_shim32_read, |
| .write64 = sst_shim32_write64, |
| .read64 = sst_shim32_read64, |
| .ram_read = sst_memcpy_fromio_32, |
| .ram_write = sst_memcpy_toio_32, |
| .irq_handler = hsw_irq, |
| .init = hsw_init, |
| .free = hsw_free, |
| .parse_fw = hsw_parse_fw_image, |
| }; |