| /* |
| * include/linux/mmc/sh_mmcif.h |
| * |
| * platform data for eMMC driver |
| * |
| * Copyright (C) 2010 Renesas Solutions Corp. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| * |
| */ |
| |
| #ifndef LINUX_MMC_SH_MMCIF_H |
| #define LINUX_MMC_SH_MMCIF_H |
| |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| |
| /* |
| * MMCIF : CE_CLK_CTRL [19:16] |
| * 1000 : Peripheral clock / 512 |
| * 0111 : Peripheral clock / 256 |
| * 0110 : Peripheral clock / 128 |
| * 0101 : Peripheral clock / 64 |
| * 0100 : Peripheral clock / 32 |
| * 0011 : Peripheral clock / 16 |
| * 0010 : Peripheral clock / 8 |
| * 0001 : Peripheral clock / 4 |
| * 0000 : Peripheral clock / 2 |
| * 1111 : Peripheral clock (sup_pclk set '1') |
| */ |
| |
| struct sh_mmcif_plat_data { |
| unsigned int slave_id_tx; /* embedded slave_id_[tr]x */ |
| unsigned int slave_id_rx; |
| u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ |
| unsigned long caps; |
| u32 ocr; |
| }; |
| |
| #define MMCIF_CE_CMD_SET 0x00000000 |
| #define MMCIF_CE_ARG 0x00000008 |
| #define MMCIF_CE_ARG_CMD12 0x0000000C |
| #define MMCIF_CE_CMD_CTRL 0x00000010 |
| #define MMCIF_CE_BLOCK_SET 0x00000014 |
| #define MMCIF_CE_CLK_CTRL 0x00000018 |
| #define MMCIF_CE_BUF_ACC 0x0000001C |
| #define MMCIF_CE_RESP3 0x00000020 |
| #define MMCIF_CE_RESP2 0x00000024 |
| #define MMCIF_CE_RESP1 0x00000028 |
| #define MMCIF_CE_RESP0 0x0000002C |
| #define MMCIF_CE_RESP_CMD12 0x00000030 |
| #define MMCIF_CE_DATA 0x00000034 |
| #define MMCIF_CE_INT 0x00000040 |
| #define MMCIF_CE_INT_MASK 0x00000044 |
| #define MMCIF_CE_HOST_STS1 0x00000048 |
| #define MMCIF_CE_HOST_STS2 0x0000004C |
| #define MMCIF_CE_CLK_CTRL2 0x00000070 |
| #define MMCIF_CE_VERSION 0x0000007C |
| |
| /* CE_BUF_ACC */ |
| #define BUF_ACC_DMAWEN (1 << 25) |
| #define BUF_ACC_DMAREN (1 << 24) |
| #define BUF_ACC_BUSW_32 (0 << 17) |
| #define BUF_ACC_BUSW_16 (1 << 17) |
| #define BUF_ACC_ATYP (1 << 16) |
| |
| /* CE_CLK_CTRL */ |
| #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ |
| #define CLK_CLEAR (0xf << 16) |
| #define CLK_SUP_PCLK (0xf << 16) |
| #define CLKDIV_4 (1 << 16) /* mmc clock frequency. |
| * n: bus clock/(2^(n+1)) */ |
| #define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ |
| #define SRSPTO_256 (2 << 12) /* resp timeout */ |
| #define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ |
| #define SRWDTO_29 (0xf << 4) /* read/write timeout */ |
| #define SCCSTO_29 (0xf << 0) /* ccs timeout */ |
| |
| /* CE_VERSION */ |
| #define SOFT_RST_ON (1 << 31) |
| #define SOFT_RST_OFF 0 |
| |
| static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) |
| { |
| return __raw_readl(addr + reg); |
| } |
| |
| static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) |
| { |
| __raw_writel(val, addr + reg); |
| } |
| |
| #define SH_MMCIF_BBS 512 /* boot block size */ |
| |
| static inline void sh_mmcif_boot_cmd_send(void __iomem *base, |
| unsigned long cmd, unsigned long arg) |
| { |
| sh_mmcif_writel(base, MMCIF_CE_INT, 0); |
| sh_mmcif_writel(base, MMCIF_CE_ARG, arg); |
| sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd); |
| } |
| |
| static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) |
| { |
| unsigned long tmp; |
| int cnt; |
| |
| for (cnt = 0; cnt < 1000000; cnt++) { |
| tmp = sh_mmcif_readl(base, MMCIF_CE_INT); |
| if (tmp & mask) { |
| sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask); |
| return 0; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static inline int sh_mmcif_boot_cmd(void __iomem *base, |
| unsigned long cmd, unsigned long arg) |
| { |
| sh_mmcif_boot_cmd_send(base, cmd, arg); |
| return sh_mmcif_boot_cmd_poll(base, 0x00010000); |
| } |
| |
| static inline int sh_mmcif_boot_do_read_single(void __iomem *base, |
| unsigned int block_nr, |
| unsigned long *buf) |
| { |
| int k; |
| |
| /* CMD13 - Status */ |
| sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000); |
| |
| if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900) |
| return -1; |
| |
| /* CMD17 - Read */ |
| sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS); |
| if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0) |
| return -1; |
| |
| for (k = 0; k < (SH_MMCIF_BBS / 4); k++) |
| buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA); |
| |
| return 0; |
| } |
| |
| static inline int sh_mmcif_boot_do_read(void __iomem *base, |
| unsigned long first_block, |
| unsigned long nr_blocks, |
| void *buf) |
| { |
| unsigned long k; |
| int ret = 0; |
| |
| /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ |
| sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, |
| CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | |
| SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); |
| |
| /* CMD9 - Get CSD */ |
| sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); |
| |
| /* CMD7 - Select the card */ |
| sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); |
| |
| /* CMD16 - Set the block size */ |
| sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS); |
| |
| for (k = 0; !ret && k < nr_blocks; k++) |
| ret = sh_mmcif_boot_do_read_single(base, first_block + k, |
| buf + (k * SH_MMCIF_BBS)); |
| |
| return ret; |
| } |
| |
| static inline void sh_mmcif_boot_init(void __iomem *base) |
| { |
| /* reset */ |
| sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON); |
| sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF); |
| |
| /* byte swap */ |
| sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); |
| |
| /* Set block size in MMCIF hardware */ |
| sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); |
| |
| /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ |
| sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, |
| CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | |
| SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); |
| |
| /* CMD0 */ |
| sh_mmcif_boot_cmd(base, 0x00000040, 0); |
| |
| /* CMD1 - Get OCR */ |
| do { |
| sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */ |
| } while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000) |
| != 0x80000000); |
| |
| /* CMD2 - Get CID */ |
| sh_mmcif_boot_cmd(base, 0x02806040, 0); |
| |
| /* CMD3 - Set card relative address */ |
| sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); |
| } |
| |
| #endif /* LINUX_MMC_SH_MMCIF_H */ |