include/linux/dio.h - linux-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /* header file for DIO boards for the HP300 architecture.
  * Maybe this should handle DIO-II later?
  * The general structure of this is vaguely based on how
  * the Amiga port handles Zorro boards.
  * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
  * Converted to driver model Jochen Friedrich <jochen@scram.de>
  *
  * The board IDs are from the NetBSD kernel, which for once provided
  * helpful comments...
  *
  * This goes with drivers/dio/dio.c
  */

 #ifndef _LINUX_DIO_H
 #define _LINUX_DIO_H

 /* The DIO boards in a system are distinguished by 'select codes' which
  * range from 0-63 (DIO) and 132-255 (DIO-II).
  * The DIO board with select code sc is located at physical address
  *     0x600000 + sc * 0x10000
  * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
  * [0x800000-0x1000000) are for additional space required by things
  * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
  * On Linux, this is currently all mapped into the virtual address space
  * at 0xf0000000 on bootup.
  * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
  * which is address range [0x1000000-0x20000000) -- too big to map completely,
  * so currently we just don't handle DIO-II boards.  It wouldn't be hard to
  * do with ioremap() though.
  */

 #include <linux/device.h>

 #ifdef __KERNEL__

 #include <asm/hp300hw.h>

 typedef __u16 dio_id;

     /*
      *  DIO devices
      */

 struct dio_dev {
 	struct dio_bus *bus;
 	dio_id id;
 	int scode;
 	struct dio_driver *driver;	/* which driver has allocated this device */
 	struct device dev;		/* Generic device interface */
 	u8 ipl;
 	char name[64];
 	struct resource resource;
 };

 #define to_dio_dev(n) container_of(n, struct dio_dev, dev)

     /*
      *  DIO bus
      */

 struct dio_bus {
 	struct list_head devices;           /* list of devices on this bus */
 	unsigned int num_resources;         /* number of resources */
 	struct resource resources[2];       /* address space routed to this bus */
 	struct device dev;
 	char name[10];
 };

 extern struct dio_bus dio_bus;      /* Single DIO bus */
 extern struct bus_type dio_bus_type;

     /*
      *  DIO device IDs
      */

 struct dio_device_id {
 	dio_id id;                    /* Device ID or DIO_WILDCARD */
 	unsigned long driver_data;    /* Data private to the driver */
 };

     /*
      *  DIO device drivers
      */

 struct dio_driver {
 	struct list_head node;
 	char *name;
 	const struct dio_device_id *id_table;     /* NULL if wants all devices */
 	int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
 /* New device inserted */
 	void (*remove)(struct dio_dev *z);        /* Device removed (NULL if not a hot-plug capable driver) */
 	struct device_driver driver;
 };

 #define to_dio_driver(drv)    container_of(drv, struct dio_driver, driver)

 /* DIO/DIO-II boards all have the following 8bit registers.
  * These are offsets from the base of the device.
  */
 #define DIO_IDOFF     0x01             /* primary device ID */
 #define DIO_IPLOFF    0x03             /* interrupt priority level */
 #define DIO_SECIDOFF  0x15             /* secondary device ID */
 #define DIOII_SIZEOFF 0x101            /* device size, DIO-II only */
 #define DIO_VIRADDRBASE 0xf0000000UL   /* vir addr where IOspace is mapped */

 #define DIO_BASE                0x600000        /* start of DIO space */
 #define DIO_END                 0x1000000       /* end of DIO space */
 #define DIO_DEVSIZE             0x10000         /* size of a DIO device */

 #define DIOII_BASE              0x01000000      /* start of DIO-II space */
 #define DIOII_END               0x20000000      /* end of DIO-II space */
 #define DIOII_DEVSIZE           0x00400000      /* size of a DIO-II device */

 /* Highest valid select code. If we add DIO-II support this should become
  * 256 for everything except HP320, which only has DIO.
  */
 #define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
 #define DIOII_SCBASE 132 /* lowest DIO-II select code */
 #define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
 #define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)

 /* macros to read device IDs, given base address */
 #define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
 #define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)

 /* extract the interrupt level */
 #define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)

 /* find the size of a DIO-II board's address space.
  * DIO boards are all fixed length.
  */
 #define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)

 /* general purpose macro for both DIO and DIO-II */
 #define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)

 /* The hardware has primary and secondary IDs; we encode these in a single
  * int as PRIMARY ID & (SECONDARY ID << 8).
  * In practice this is only important for framebuffers,
  * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
  */
 #define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
 /* macro to determine whether a given primary ID requires a secondary ID byte */
 #define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
 #define DIO_WILDCARD 0xff

 /* Now a whole slew of macros giving device IDs and descriptive strings: */
 #define DIO_ID_DCA0     0x02 /* 98644A serial */
 #define DIO_DESC_DCA0 "98644A DCA0 serial"
 #define DIO_ID_DCA0REM  0x82 /* 98644A serial */
 #define DIO_DESC_DCA0REM "98644A DCA0REM serial"
 #define DIO_ID_DCA1     0x42 /* 98644A serial */
 #define DIO_DESC_DCA1 "98644A DCA1 serial"
 #define DIO_ID_DCA1REM  0xc2 /* 98644A serial */
 #define DIO_DESC_DCA1REM "98644A DCA1REM serial"
 #define DIO_ID_DCM      0x05 /* 98642A serial MUX */
 #define DIO_DESC_DCM "98642A DCM serial MUX"
 #define DIO_ID_DCMREM   0x85 /* 98642A serial MUX */
 #define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
 #define DIO_ID_LAN      0x15 /* 98643A LAN */
 #define DIO_DESC_LAN "98643A LANCE ethernet"
 #define DIO_ID_FHPIB    0x08 /* 98625A/98625B fast HP-IB */
 #define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
 #define DIO_ID_NHPIB    0x01 /* 98624A HP-IB (normal ie slow) */
 #define DIO_DESC_NHPIB "98624A HPIB"
 #define DIO_ID_SCSI0    0x07 /* 98265A SCSI */
 #define DIO_DESC_SCSI0 "98265A SCSI0"
 #define DIO_ID_SCSI1    0x27 /* ditto */
 #define DIO_DESC_SCSI1 "98265A SCSI1"
 #define DIO_ID_SCSI2    0x47 /* ditto */
 #define DIO_DESC_SCSI2 "98265A SCSI2"
 #define DIO_ID_SCSI3    0x67 /* ditto */
 #define DIO_DESC_SCSI3 "98265A SCSI3"
 #define DIO_ID_FBUFFER  0x39 /* framebuffer: flavour is distinguished by secondary ID */
 #define DIO_DESC_FBUFFER "bitmapped display"
 /* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
 #define DIO_ID_MISC0    0x03 /* 98622A */
 #define DIO_DESC_MISC0 "98622A"
 #define DIO_ID_MISC1    0x04 /* 98623A */
 #define DIO_DESC_MISC1 "98623A"
 #define DIO_ID_PARALLEL 0x06 /* internal parallel */
 #define DIO_DESC_PARALLEL "internal parallel"
 #define DIO_ID_MISC2    0x09 /* 98287A keyboard */
 #define DIO_DESC_MISC2 "98287A keyboard"
 #define DIO_ID_MISC3    0x0a /* HP98635A FP accelerator */
 #define DIO_DESC_MISC3 "HP98635A FP accelerator"
 #define DIO_ID_MISC4    0x0b /* timer */
 #define DIO_DESC_MISC4 "timer"
 #define DIO_ID_MISC5    0x12 /* 98640A */
 #define DIO_DESC_MISC5 "98640A"
 #define DIO_ID_MISC6    0x16 /* 98659A */
 #define DIO_DESC_MISC6 "98659A"
 #define DIO_ID_MISC7    0x19 /* 237 display */
 #define DIO_DESC_MISC7 "237 display"
 #define DIO_ID_MISC8    0x1a /* quad-wide card */
 #define DIO_DESC_MISC8 "quad-wide card"
 #define DIO_ID_MISC9    0x1b /* 98253A */
 #define DIO_DESC_MISC9 "98253A"
 #define DIO_ID_MISC10   0x1c /* 98627A */
 #define DIO_DESC_MISC10 "98253A"
 #define DIO_ID_MISC11   0x1d /* 98633A */
 #define DIO_DESC_MISC11 "98633A"
 #define DIO_ID_MISC12   0x1e /* 98259A */
 #define DIO_DESC_MISC12 "98259A"
 #define DIO_ID_MISC13   0x1f /* 8741 */
 #define DIO_DESC_MISC13 "8741"
 #define DIO_ID_VME      0x31 /* 98577A VME adapter */
 #define DIO_DESC_VME "98577A VME adapter"
 #define DIO_ID_DCL      0x34 /* 98628A serial */
 #define DIO_DESC_DCL "98628A DCL serial"
 #define DIO_ID_DCLREM   0xb4 /* 98628A serial */
 #define DIO_DESC_DCLREM "98628A DCLREM serial"
 /* These are the secondary IDs for the framebuffers */
 #define DIO_ID2_GATORBOX    0x01 /* 98700/98710 "gatorbox" */
 #define DIO_DESC2_GATORBOX       "98700/98710 \"gatorbox\" display"
 #define DIO_ID2_TOPCAT      0x02 /* 98544/98545/98547 "topcat" */
 #define DIO_DESC2_TOPCAT         "98544/98545/98547 \"topcat\" display"
 #define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
 #define DIO_DESC2_RENAISSANCE    "98720/98721 \"renaissance\" display"
 #define DIO_ID2_LRCATSEYE   0x05 /* lowres "catseye" */
 #define DIO_DESC2_LRCATSEYE      "low-res catseye display"
 #define DIO_ID2_HRCCATSEYE  0x06 /* highres colour "catseye" */
 #define DIO_DESC2_HRCCATSEYE     "high-res color catseye display"
 #define DIO_ID2_HRMCATSEYE  0x07 /* highres mono "catseye" */
 #define DIO_DESC2_HRMCATSEYE     "high-res mono catseye display"
 #define DIO_ID2_DAVINCI     0x08 /* 98730/98731 "davinci" */
 #define DIO_DESC2_DAVINCI        "98730/98731 \"davinci\" display"
 #define DIO_ID2_XXXCATSEYE  0x09 /* "catseye" */
 #define DIO_DESC2_XXXCATSEYE     "catseye display"
 #define DIO_ID2_HYPERION    0x0e /* A1096A "hyperion" */
 #define DIO_DESC2_HYPERION       "A1096A \"hyperion\" display"
 #define DIO_ID2_XGENESIS    0x0b /* "x-genesis"; no NetBSD support */
 #define DIO_DESC2_XGENESIS       "\"x-genesis\" display"
 #define DIO_ID2_TIGER       0x0c /* "tiger"; no NetBSD support */
 #define DIO_DESC2_TIGER          "\"tiger\" display"
 #define DIO_ID2_YGENESIS    0x0d /* "y-genesis"; no NetBSD support */
 #define DIO_DESC2_YGENESIS       "\"y-genesis\" display"
 /* if you add new IDs then you should tell dio.c about them so it can
  * identify them...
  */

 extern int dio_find(int deviceid);
 extern unsigned long dio_scodetophysaddr(int scode);
 extern int dio_create_sysfs_dev_files(struct dio_dev *);

 /* New-style probing */
 extern int dio_register_driver(struct dio_driver *);
 extern void dio_unregister_driver(struct dio_driver *);
 extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
 static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
 {
     return d->driver;
 }

 #define dio_resource_start(d) ((d)->resource.start)
 #define dio_resource_end(d)   ((d)->resource.end)
 #define dio_resource_len(d)   (resource_size(&(d)->resource))
 #define dio_resource_flags(d) ((d)->resource.flags)

 #define dio_request_device(d, name) \
     request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
 #define dio_release_device(d) \
     release_mem_region(dio_resource_start(d), dio_resource_len(d))

 /* Similar to the helpers above, these manipulate per-dio_dev
  * driver-specific data.  They are really just a wrapper around
  * the generic device structure functions of these calls.
  */
 static inline void *dio_get_drvdata (struct dio_dev *d)
 {
 	return dev_get_drvdata(&d->dev);
 }

 static inline void dio_set_drvdata (struct dio_dev *d, void *data)
 {
 	dev_set_drvdata(&d->dev, data);
 }

 #endif /* __KERNEL__ */
 #endif /* ndef _LINUX_DIO_H */
	/* SPDX-License-Identifier: GPL-2.0 */
	/* header file for DIO boards for the HP300 architecture.
	* Maybe this should handle DIO-II later?
	* The general structure of this is vaguely based on how
	* the Amiga port handles Zorro boards.
	* Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
	* Converted to driver model Jochen Friedrich <jochen@scram.de>
	*
	* The board IDs are from the NetBSD kernel, which for once provided
	* helpful comments...
	*
	* This goes with drivers/dio/dio.c
	*/

	#ifndef _LINUX_DIO_H
	#define _LINUX_DIO_H

	/* The DIO boards in a system are distinguished by 'select codes' which
	* range from 0-63 (DIO) and 132-255 (DIO-II).
	* The DIO board with select code sc is located at physical address
	* 0x600000 + sc * 0x10000
	* So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
	* [0x800000-0x1000000) are for additional space required by things
	* like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
	* On Linux, this is currently all mapped into the virtual address space
	* at 0xf0000000 on bootup.
	* DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
	* which is address range [0x1000000-0x20000000) -- too big to map completely,
	* so currently we just don't handle DIO-II boards. It wouldn't be hard to
	* do with ioremap() though.
	*/

	#include <linux/device.h>

	#ifdef __KERNEL__

	#include <asm/hp300hw.h>

	typedef __u16 dio_id;

	/*
	* DIO devices
	*/

	struct dio_dev {
	struct dio_bus *bus;
	dio_id id;
	int scode;
	struct dio_driver driver; / which driver has allocated this device */
	struct device dev; /* Generic device interface */
	u8 ipl;
	char name[64];
	struct resource resource;
	};

	#define to_dio_dev(n) container_of(n, struct dio_dev, dev)

	/*
	* DIO bus
	*/

	struct dio_bus {
	struct list_head devices; /* list of devices on this bus */
	unsigned int num_resources; /* number of resources */
	struct resource resources[2]; /* address space routed to this bus */
	struct device dev;
	char name[10];
	};

	extern struct dio_bus dio_bus; /* Single DIO bus */
	extern struct bus_type dio_bus_type;

	/*
	* DIO device IDs
	*/

	struct dio_device_id {
	dio_id id; /* Device ID or DIO_WILDCARD */
	unsigned long driver_data; /* Data private to the driver */
	};

	/*
	* DIO device drivers
	*/

	struct dio_driver {
	struct list_head node;
	char *name;
	const struct dio_device_id id_table; / NULL if wants all devices */
	int (probe)(struct dio_dev z, const struct dio_device_id *id);
	/* New device inserted */
	void (remove)(struct dio_dev z); /* Device removed (NULL if not a hot-plug capable driver) */
	struct device_driver driver;
	};

	#define to_dio_driver(drv) container_of(drv, struct dio_driver, driver)

	/* DIO/DIO-II boards all have the following 8bit registers.
	* These are offsets from the base of the device.
	*/
	#define DIO_IDOFF 0x01 /* primary device ID */
	#define DIO_IPLOFF 0x03 /* interrupt priority level */
	#define DIO_SECIDOFF 0x15 /* secondary device ID */
	#define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
	#define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */

	#define DIO_BASE 0x600000 /* start of DIO space */
	#define DIO_END 0x1000000 /* end of DIO space */
	#define DIO_DEVSIZE 0x10000 /* size of a DIO device */

	#define DIOII_BASE 0x01000000 /* start of DIO-II space */
	#define DIOII_END 0x20000000 /* end of DIO-II space */
	#define DIOII_DEVSIZE 0x00400000 /* size of a DIO-II device */

	/* Highest valid select code. If we add DIO-II support this should become
	* 256 for everything except HP320, which only has DIO.
	*/
	#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
	#define DIOII_SCBASE 132 /* lowest DIO-II select code */
	#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
	#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)

	/* macros to read device IDs, given base address */
	#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
	#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)

	/* extract the interrupt level */
	#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)

	/* find the size of a DIO-II board's address space.
	* DIO boards are all fixed length.
	*/
	#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)

	/* general purpose macro for both DIO and DIO-II */
	#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)

	/* The hardware has primary and secondary IDs; we encode these in a single
	* int as PRIMARY ID & (SECONDARY ID << 8).
	* In practice this is only important for framebuffers,
	* and everybody else just sets ID fields equal to the DIO_ID_FOO value.
	*/
	#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) \| ((int)pr & 0xff))
	/* macro to determine whether a given primary ID requires a secondary ID byte */
	#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
	#define DIO_WILDCARD 0xff

	/* Now a whole slew of macros giving device IDs and descriptive strings: */
	#define DIO_ID_DCA0 0x02 /* 98644A serial */
	#define DIO_DESC_DCA0 "98644A DCA0 serial"
	#define DIO_ID_DCA0REM 0x82 /* 98644A serial */
	#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
	#define DIO_ID_DCA1 0x42 /* 98644A serial */
	#define DIO_DESC_DCA1 "98644A DCA1 serial"
	#define DIO_ID_DCA1REM 0xc2 /* 98644A serial */
	#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
	#define DIO_ID_DCM 0x05 /* 98642A serial MUX */
	#define DIO_DESC_DCM "98642A DCM serial MUX"
	#define DIO_ID_DCMREM 0x85 /* 98642A serial MUX */
	#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
	#define DIO_ID_LAN 0x15 /* 98643A LAN */
	#define DIO_DESC_LAN "98643A LANCE ethernet"
	#define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
	#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
	#define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
	#define DIO_DESC_NHPIB "98624A HPIB"
	#define DIO_ID_SCSI0 0x07 /* 98265A SCSI */
	#define DIO_DESC_SCSI0 "98265A SCSI0"
	#define DIO_ID_SCSI1 0x27 /* ditto */
	#define DIO_DESC_SCSI1 "98265A SCSI1"
	#define DIO_ID_SCSI2 0x47 /* ditto */
	#define DIO_DESC_SCSI2 "98265A SCSI2"
	#define DIO_ID_SCSI3 0x67 /* ditto */
	#define DIO_DESC_SCSI3 "98265A SCSI3"
	#define DIO_ID_FBUFFER 0x39 /* framebuffer: flavour is distinguished by secondary ID */
	#define DIO_DESC_FBUFFER "bitmapped display"
	/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
	#define DIO_ID_MISC0 0x03 /* 98622A */
	#define DIO_DESC_MISC0 "98622A"
	#define DIO_ID_MISC1 0x04 /* 98623A */
	#define DIO_DESC_MISC1 "98623A"
	#define DIO_ID_PARALLEL 0x06 /* internal parallel */
	#define DIO_DESC_PARALLEL "internal parallel"
	#define DIO_ID_MISC2 0x09 /* 98287A keyboard */
	#define DIO_DESC_MISC2 "98287A keyboard"
	#define DIO_ID_MISC3 0x0a /* HP98635A FP accelerator */
	#define DIO_DESC_MISC3 "HP98635A FP accelerator"
	#define DIO_ID_MISC4 0x0b /* timer */
	#define DIO_DESC_MISC4 "timer"
	#define DIO_ID_MISC5 0x12 /* 98640A */
	#define DIO_DESC_MISC5 "98640A"
	#define DIO_ID_MISC6 0x16 /* 98659A */
	#define DIO_DESC_MISC6 "98659A"
	#define DIO_ID_MISC7 0x19 /* 237 display */
	#define DIO_DESC_MISC7 "237 display"
	#define DIO_ID_MISC8 0x1a /* quad-wide card */
	#define DIO_DESC_MISC8 "quad-wide card"
	#define DIO_ID_MISC9 0x1b /* 98253A */
	#define DIO_DESC_MISC9 "98253A"
	#define DIO_ID_MISC10 0x1c /* 98627A */
	#define DIO_DESC_MISC10 "98253A"
	#define DIO_ID_MISC11 0x1d /* 98633A */
	#define DIO_DESC_MISC11 "98633A"
	#define DIO_ID_MISC12 0x1e /* 98259A */
	#define DIO_DESC_MISC12 "98259A"
	#define DIO_ID_MISC13 0x1f /* 8741 */
	#define DIO_DESC_MISC13 "8741"
	#define DIO_ID_VME 0x31 /* 98577A VME adapter */
	#define DIO_DESC_VME "98577A VME adapter"
	#define DIO_ID_DCL 0x34 /* 98628A serial */
	#define DIO_DESC_DCL "98628A DCL serial"
	#define DIO_ID_DCLREM 0xb4 /* 98628A serial */
	#define DIO_DESC_DCLREM "98628A DCLREM serial"
	/* These are the secondary IDs for the framebuffers */
	#define DIO_ID2_GATORBOX 0x01 /* 98700/98710 "gatorbox" */
	#define DIO_DESC2_GATORBOX "98700/98710 \"gatorbox\" display"
	#define DIO_ID2_TOPCAT 0x02 /* 98544/98545/98547 "topcat" */
	#define DIO_DESC2_TOPCAT "98544/98545/98547 \"topcat\" display"
	#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
	#define DIO_DESC2_RENAISSANCE "98720/98721 \"renaissance\" display"
	#define DIO_ID2_LRCATSEYE 0x05 /* lowres "catseye" */
	#define DIO_DESC2_LRCATSEYE "low-res catseye display"
	#define DIO_ID2_HRCCATSEYE 0x06 /* highres colour "catseye" */
	#define DIO_DESC2_HRCCATSEYE "high-res color catseye display"
	#define DIO_ID2_HRMCATSEYE 0x07 /* highres mono "catseye" */
	#define DIO_DESC2_HRMCATSEYE "high-res mono catseye display"
	#define DIO_ID2_DAVINCI 0x08 /* 98730/98731 "davinci" */
	#define DIO_DESC2_DAVINCI "98730/98731 \"davinci\" display"
	#define DIO_ID2_XXXCATSEYE 0x09 /* "catseye" */
	#define DIO_DESC2_XXXCATSEYE "catseye display"
	#define DIO_ID2_HYPERION 0x0e /* A1096A "hyperion" */
	#define DIO_DESC2_HYPERION "A1096A \"hyperion\" display"
	#define DIO_ID2_XGENESIS 0x0b /* "x-genesis"; no NetBSD support */
	#define DIO_DESC2_XGENESIS "\"x-genesis\" display"
	#define DIO_ID2_TIGER 0x0c /* "tiger"; no NetBSD support */
	#define DIO_DESC2_TIGER "\"tiger\" display"
	#define DIO_ID2_YGENESIS 0x0d /* "y-genesis"; no NetBSD support */
	#define DIO_DESC2_YGENESIS "\"y-genesis\" display"
	/* if you add new IDs then you should tell dio.c about them so it can
	* identify them...
	*/

	extern int dio_find(int deviceid);
	extern unsigned long dio_scodetophysaddr(int scode);
	extern int dio_create_sysfs_dev_files(struct dio_dev *);

	/* New-style probing */
	extern int dio_register_driver(struct dio_driver *);
	extern void dio_unregister_driver(struct dio_driver *);
	extern const struct dio_device_id dio_match_device(const struct dio_device_id ids, const struct dio_dev *z);
	static inline struct dio_driver dio_dev_driver(const struct dio_dev d)
	{
	return d->driver;
	}

	#define dio_resource_start(d) ((d)->resource.start)
	#define dio_resource_end(d) ((d)->resource.end)
	#define dio_resource_len(d) (resource_size(&(d)->resource))
	#define dio_resource_flags(d) ((d)->resource.flags)

	#define dio_request_device(d, name) \
	request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
	#define dio_release_device(d) \
	release_mem_region(dio_resource_start(d), dio_resource_len(d))

	/* Similar to the helpers above, these manipulate per-dio_dev
	* driver-specific data. They are really just a wrapper around
	* the generic device structure functions of these calls.
	*/
	static inline void dio_get_drvdata (struct dio_dev d)
	{
	return dev_get_drvdata(&d->dev);
	}

	static inline void dio_set_drvdata (struct dio_dev d, void data)
	{
	dev_set_drvdata(&d->dev, data);
	}

	#endif /* __KERNEL__ */
	#endif /* ndef _LINUX_DIO_H */