| /* |
| * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com> |
| * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com> |
| * |
| * Derived from the PCAN project file driver/src/pcan_pci.c: |
| * |
| * Copyright (C) 2001-2006 PEAK System-Technik GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the version 2 of the GNU General Public License |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/netdevice.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| |
| #include "peak_canfd_user.h" |
| |
| MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>"); |
| MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards"); |
| MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe/M.2 FD CAN cards"); |
| MODULE_LICENSE("GPL v2"); |
| |
| #define PCIEFD_DRV_NAME "peak_pciefd" |
| |
| #define PEAK_PCI_VENDOR_ID 0x001c /* The PCI device and vendor IDs */ |
| #define PEAK_PCIEFD_ID 0x0013 /* for PCIe slot cards */ |
| #define PCAN_CPCIEFD_ID 0x0014 /* for Compact-PCI Serial slot cards */ |
| #define PCAN_PCIE104FD_ID 0x0017 /* for PCIe-104 Express slot cards */ |
| #define PCAN_MINIPCIEFD_ID 0x0018 /* for mini-PCIe slot cards */ |
| #define PCAN_PCIEFD_OEM_ID 0x0019 /* for PCIe slot OEM cards */ |
| #define PCAN_M2_ID 0x001a /* for M2 slot cards */ |
| |
| /* PEAK PCIe board access description */ |
| #define PCIEFD_BAR0_SIZE (64 * 1024) |
| #define PCIEFD_RX_DMA_SIZE (4 * 1024) |
| #define PCIEFD_TX_DMA_SIZE (4 * 1024) |
| |
| #define PCIEFD_TX_PAGE_SIZE (2 * 1024) |
| |
| /* System Control Registers */ |
| #define PCIEFD_REG_SYS_CTL_SET 0x0000 /* set bits */ |
| #define PCIEFD_REG_SYS_CTL_CLR 0x0004 /* clear bits */ |
| |
| /* Version info registers */ |
| #define PCIEFD_REG_SYS_VER1 0x0040 /* version reg #1 */ |
| #define PCIEFD_REG_SYS_VER2 0x0044 /* version reg #2 */ |
| |
| #define PCIEFD_FW_VERSION(x, y, z) (((u32)(x) << 24) | \ |
| ((u32)(y) << 16) | \ |
| ((u32)(z) << 8)) |
| |
| /* System Control Registers Bits */ |
| #define PCIEFD_SYS_CTL_TS_RST 0x00000001 /* timestamp clock */ |
| #define PCIEFD_SYS_CTL_CLK_EN 0x00000002 /* system clock */ |
| |
| /* CAN-FD channel addresses */ |
| #define PCIEFD_CANX_OFF(c) (((c) + 1) * 0x1000) |
| |
| #define PCIEFD_ECHO_SKB_MAX PCANFD_ECHO_SKB_DEF |
| |
| /* CAN-FD channel registers */ |
| #define PCIEFD_REG_CAN_MISC 0x0000 /* Misc. control */ |
| #define PCIEFD_REG_CAN_CLK_SEL 0x0008 /* Clock selector */ |
| #define PCIEFD_REG_CAN_CMD_PORT_L 0x0010 /* 64-bits command port */ |
| #define PCIEFD_REG_CAN_CMD_PORT_H 0x0014 |
| #define PCIEFD_REG_CAN_TX_REQ_ACC 0x0020 /* Tx request accumulator */ |
| #define PCIEFD_REG_CAN_TX_CTL_SET 0x0030 /* Tx control set register */ |
| #define PCIEFD_REG_CAN_TX_CTL_CLR 0x0038 /* Tx control clear register */ |
| #define PCIEFD_REG_CAN_TX_DMA_ADDR_L 0x0040 /* 64-bits addr for Tx DMA */ |
| #define PCIEFD_REG_CAN_TX_DMA_ADDR_H 0x0044 |
| #define PCIEFD_REG_CAN_RX_CTL_SET 0x0050 /* Rx control set register */ |
| #define PCIEFD_REG_CAN_RX_CTL_CLR 0x0058 /* Rx control clear register */ |
| #define PCIEFD_REG_CAN_RX_CTL_WRT 0x0060 /* Rx control write register */ |
| #define PCIEFD_REG_CAN_RX_CTL_ACK 0x0068 /* Rx control ACK register */ |
| #define PCIEFD_REG_CAN_RX_DMA_ADDR_L 0x0070 /* 64-bits addr for Rx DMA */ |
| #define PCIEFD_REG_CAN_RX_DMA_ADDR_H 0x0074 |
| |
| /* CAN-FD channel misc register bits */ |
| #define CANFD_MISC_TS_RST 0x00000001 /* timestamp cnt rst */ |
| |
| /* CAN-FD channel Clock SELector Source & DIVider */ |
| #define CANFD_CLK_SEL_DIV_MASK 0x00000007 |
| #define CANFD_CLK_SEL_DIV_60MHZ 0x00000000 /* SRC=240MHz only */ |
| #define CANFD_CLK_SEL_DIV_40MHZ 0x00000001 /* SRC=240MHz only */ |
| #define CANFD_CLK_SEL_DIV_30MHZ 0x00000002 /* SRC=240MHz only */ |
| #define CANFD_CLK_SEL_DIV_24MHZ 0x00000003 /* SRC=240MHz only */ |
| #define CANFD_CLK_SEL_DIV_20MHZ 0x00000004 /* SRC=240MHz only */ |
| |
| #define CANFD_CLK_SEL_SRC_MASK 0x00000008 /* 0=80MHz, 1=240MHz */ |
| #define CANFD_CLK_SEL_SRC_240MHZ 0x00000008 |
| #define CANFD_CLK_SEL_SRC_80MHZ (~CANFD_CLK_SEL_SRC_240MHZ & \ |
| CANFD_CLK_SEL_SRC_MASK) |
| |
| #define CANFD_CLK_SEL_20MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| CANFD_CLK_SEL_DIV_20MHZ) |
| #define CANFD_CLK_SEL_24MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| CANFD_CLK_SEL_DIV_24MHZ) |
| #define CANFD_CLK_SEL_30MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| CANFD_CLK_SEL_DIV_30MHZ) |
| #define CANFD_CLK_SEL_40MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| CANFD_CLK_SEL_DIV_40MHZ) |
| #define CANFD_CLK_SEL_60MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| CANFD_CLK_SEL_DIV_60MHZ) |
| #define CANFD_CLK_SEL_80MHZ (CANFD_CLK_SEL_SRC_80MHZ) |
| |
| /* CAN-FD channel Rx/Tx control register bits */ |
| #define CANFD_CTL_UNC_BIT 0x00010000 /* Uncached DMA mem */ |
| #define CANFD_CTL_RST_BIT 0x00020000 /* reset DMA action */ |
| #define CANFD_CTL_IEN_BIT 0x00040000 /* IRQ enable */ |
| |
| /* Rx IRQ Count and Time Limits */ |
| #define CANFD_CTL_IRQ_CL_DEF 16 /* Rx msg max nb per IRQ in Rx DMA */ |
| #define CANFD_CTL_IRQ_TL_DEF 10 /* Time before IRQ if < CL (x100 µs) */ |
| |
| #define CANFD_OPTIONS_SET (CANFD_OPTION_ERROR | CANFD_OPTION_BUSLOAD) |
| |
| /* Tx anticipation window (link logical address should be aligned on 2K |
| * boundary) |
| */ |
| #define PCIEFD_TX_PAGE_COUNT (PCIEFD_TX_DMA_SIZE / PCIEFD_TX_PAGE_SIZE) |
| |
| #define CANFD_MSG_LNK_TX 0x1001 /* Tx msgs link */ |
| |
| /* 32-bits IRQ status fields, heading Rx DMA area */ |
| static inline int pciefd_irq_tag(u32 irq_status) |
| { |
| return irq_status & 0x0000000f; |
| } |
| |
| static inline int pciefd_irq_rx_cnt(u32 irq_status) |
| { |
| return (irq_status & 0x000007f0) >> 4; |
| } |
| |
| static inline int pciefd_irq_is_lnk(u32 irq_status) |
| { |
| return irq_status & 0x00010000; |
| } |
| |
| /* Rx record */ |
| struct pciefd_rx_dma { |
| __le32 irq_status; |
| __le32 sys_time_low; |
| __le32 sys_time_high; |
| struct pucan_rx_msg msg[0]; |
| } __packed __aligned(4); |
| |
| /* Tx Link record */ |
| struct pciefd_tx_link { |
| __le16 size; |
| __le16 type; |
| __le32 laddr_lo; |
| __le32 laddr_hi; |
| } __packed __aligned(4); |
| |
| /* Tx page descriptor */ |
| struct pciefd_page { |
| void *vbase; /* page virtual address */ |
| dma_addr_t lbase; /* page logical address */ |
| u32 offset; |
| u32 size; |
| }; |
| |
| /* CAN-FD channel object */ |
| struct pciefd_board; |
| struct pciefd_can { |
| struct peak_canfd_priv ucan; /* must be the first member */ |
| void __iomem *reg_base; /* channel config base addr */ |
| struct pciefd_board *board; /* reverse link */ |
| |
| struct pucan_command pucan_cmd; /* command buffer */ |
| |
| dma_addr_t rx_dma_laddr; /* DMA virtual and logical addr */ |
| void *rx_dma_vaddr; /* for Rx and Tx areas */ |
| dma_addr_t tx_dma_laddr; |
| void *tx_dma_vaddr; |
| |
| struct pciefd_page tx_pages[PCIEFD_TX_PAGE_COUNT]; |
| u16 tx_pages_free; /* free Tx pages counter */ |
| u16 tx_page_index; /* current page used for Tx */ |
| spinlock_t tx_lock; |
| |
| u32 irq_status; |
| u32 irq_tag; /* next irq tag */ |
| }; |
| |
| /* PEAK-PCIe FD board object */ |
| struct pciefd_board { |
| void __iomem *reg_base; |
| struct pci_dev *pci_dev; |
| int can_count; |
| spinlock_t cmd_lock; /* 64-bits cmds must be atomic */ |
| struct pciefd_can *can[0]; /* array of network devices */ |
| }; |
| |
| /* supported device ids. */ |
| static const struct pci_device_id peak_pciefd_tbl[] = { |
| {PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, peak_pciefd_tbl); |
| |
| /* read a 32 bits value from a SYS block register */ |
| static inline u32 pciefd_sys_readreg(const struct pciefd_board *priv, u16 reg) |
| { |
| return readl(priv->reg_base + reg); |
| } |
| |
| /* write a 32 bits value into a SYS block register */ |
| static inline void pciefd_sys_writereg(const struct pciefd_board *priv, |
| u32 val, u16 reg) |
| { |
| writel(val, priv->reg_base + reg); |
| } |
| |
| /* read a 32 bits value from CAN-FD block register */ |
| static inline u32 pciefd_can_readreg(const struct pciefd_can *priv, u16 reg) |
| { |
| return readl(priv->reg_base + reg); |
| } |
| |
| /* write a 32 bits value into a CAN-FD block register */ |
| static inline void pciefd_can_writereg(const struct pciefd_can *priv, |
| u32 val, u16 reg) |
| { |
| writel(val, priv->reg_base + reg); |
| } |
| |
| /* give a channel logical Rx DMA address to the board */ |
| static void pciefd_can_setup_rx_dma(struct pciefd_can *priv) |
| { |
| #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| const u32 dma_addr_h = (u32)(priv->rx_dma_laddr >> 32); |
| #else |
| const u32 dma_addr_h = 0; |
| #endif |
| |
| /* (DMA must be reset for Rx) */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET); |
| |
| /* write the logical address of the Rx DMA area for this channel */ |
| pciefd_can_writereg(priv, (u32)priv->rx_dma_laddr, |
| PCIEFD_REG_CAN_RX_DMA_ADDR_L); |
| pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_RX_DMA_ADDR_H); |
| |
| /* also indicates that Rx DMA is cacheable */ |
| pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_RX_CTL_CLR); |
| } |
| |
| /* clear channel logical Rx DMA address from the board */ |
| static void pciefd_can_clear_rx_dma(struct pciefd_can *priv) |
| { |
| /* DMA must be reset for Rx */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET); |
| |
| /* clear the logical address of the Rx DMA area for this channel */ |
| pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_L); |
| pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_H); |
| } |
| |
| /* give a channel logical Tx DMA address to the board */ |
| static void pciefd_can_setup_tx_dma(struct pciefd_can *priv) |
| { |
| #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| const u32 dma_addr_h = (u32)(priv->tx_dma_laddr >> 32); |
| #else |
| const u32 dma_addr_h = 0; |
| #endif |
| |
| /* (DMA must be reset for Tx) */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET); |
| |
| /* write the logical address of the Tx DMA area for this channel */ |
| pciefd_can_writereg(priv, (u32)priv->tx_dma_laddr, |
| PCIEFD_REG_CAN_TX_DMA_ADDR_L); |
| pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_TX_DMA_ADDR_H); |
| |
| /* also indicates that Tx DMA is cacheable */ |
| pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_TX_CTL_CLR); |
| } |
| |
| /* clear channel logical Tx DMA address from the board */ |
| static void pciefd_can_clear_tx_dma(struct pciefd_can *priv) |
| { |
| /* DMA must be reset for Tx */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET); |
| |
| /* clear the logical address of the Tx DMA area for this channel */ |
| pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_L); |
| pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_H); |
| } |
| |
| static void pciefd_can_ack_rx_dma(struct pciefd_can *priv) |
| { |
| /* read value of current IRQ tag and inc it for next one */ |
| priv->irq_tag = le32_to_cpu(*(__le32 *)priv->rx_dma_vaddr); |
| priv->irq_tag++; |
| priv->irq_tag &= 0xf; |
| |
| /* write the next IRQ tag for this CAN */ |
| pciefd_can_writereg(priv, priv->irq_tag, PCIEFD_REG_CAN_RX_CTL_ACK); |
| } |
| |
| /* IRQ handler */ |
| static irqreturn_t pciefd_irq_handler(int irq, void *arg) |
| { |
| struct pciefd_can *priv = arg; |
| struct pciefd_rx_dma *rx_dma = priv->rx_dma_vaddr; |
| |
| /* INTA mode only to sync with PCIe transaction */ |
| if (!pci_dev_msi_enabled(priv->board->pci_dev)) |
| (void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1); |
| |
| /* read IRQ status from the first 32-bits of the Rx DMA area */ |
| priv->irq_status = le32_to_cpu(rx_dma->irq_status); |
| |
| /* check if this (shared) IRQ is for this CAN */ |
| if (pciefd_irq_tag(priv->irq_status) != priv->irq_tag) |
| return IRQ_NONE; |
| |
| /* handle rx messages (if any) */ |
| peak_canfd_handle_msgs_list(&priv->ucan, |
| rx_dma->msg, |
| pciefd_irq_rx_cnt(priv->irq_status)); |
| |
| /* handle tx link interrupt (if any) */ |
| if (pciefd_irq_is_lnk(priv->irq_status)) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| priv->tx_pages_free++; |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| /* wake producer up (only if enough room in echo_skb array) */ |
| spin_lock_irqsave(&priv->ucan.echo_lock, flags); |
| if (!priv->ucan.can.echo_skb[priv->ucan.echo_idx]) |
| netif_wake_queue(priv->ucan.ndev); |
| |
| spin_unlock_irqrestore(&priv->ucan.echo_lock, flags); |
| } |
| |
| /* re-enable Rx DMA transfer for this CAN */ |
| pciefd_can_ack_rx_dma(priv); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pciefd_enable_tx_path(struct peak_canfd_priv *ucan) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| int i; |
| |
| /* initialize the Tx pages descriptors */ |
| priv->tx_pages_free = PCIEFD_TX_PAGE_COUNT - 1; |
| priv->tx_page_index = 0; |
| |
| priv->tx_pages[0].vbase = priv->tx_dma_vaddr; |
| priv->tx_pages[0].lbase = priv->tx_dma_laddr; |
| |
| for (i = 0; i < PCIEFD_TX_PAGE_COUNT; i++) { |
| priv->tx_pages[i].offset = 0; |
| priv->tx_pages[i].size = PCIEFD_TX_PAGE_SIZE - |
| sizeof(struct pciefd_tx_link); |
| if (i) { |
| priv->tx_pages[i].vbase = |
| priv->tx_pages[i - 1].vbase + |
| PCIEFD_TX_PAGE_SIZE; |
| priv->tx_pages[i].lbase = |
| priv->tx_pages[i - 1].lbase + |
| PCIEFD_TX_PAGE_SIZE; |
| } |
| } |
| |
| /* setup Tx DMA addresses into IP core */ |
| pciefd_can_setup_tx_dma(priv); |
| |
| /* start (TX_RST=0) Tx Path */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_CLR); |
| |
| return 0; |
| } |
| |
| /* board specific CANFD command pre-processing */ |
| static int pciefd_pre_cmd(struct peak_canfd_priv *ucan) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd); |
| int err; |
| |
| /* pre-process command */ |
| switch (cmd) { |
| case PUCAN_CMD_NORMAL_MODE: |
| case PUCAN_CMD_LISTEN_ONLY_MODE: |
| |
| if (ucan->can.state == CAN_STATE_BUS_OFF) |
| break; |
| |
| /* going into operational mode: setup IRQ handler */ |
| err = request_irq(priv->ucan.ndev->irq, |
| pciefd_irq_handler, |
| IRQF_SHARED, |
| PCIEFD_DRV_NAME, |
| priv); |
| if (err) |
| return err; |
| |
| /* setup Rx DMA address */ |
| pciefd_can_setup_rx_dma(priv); |
| |
| /* setup max count of msgs per IRQ */ |
| pciefd_can_writereg(priv, (CANFD_CTL_IRQ_TL_DEF) << 8 | |
| CANFD_CTL_IRQ_CL_DEF, |
| PCIEFD_REG_CAN_RX_CTL_WRT); |
| |
| /* clear DMA RST for Rx (Rx start) */ |
| pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, |
| PCIEFD_REG_CAN_RX_CTL_CLR); |
| |
| /* reset timestamps */ |
| pciefd_can_writereg(priv, !CANFD_MISC_TS_RST, |
| PCIEFD_REG_CAN_MISC); |
| |
| /* do an initial ACK */ |
| pciefd_can_ack_rx_dma(priv); |
| |
| /* enable IRQ for this CAN after having set next irq_tag */ |
| pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, |
| PCIEFD_REG_CAN_RX_CTL_SET); |
| |
| /* Tx path will be setup as soon as RX_BARRIER is received */ |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* write a command */ |
| static int pciefd_write_cmd(struct peak_canfd_priv *ucan) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| unsigned long flags; |
| |
| /* 64-bits command is atomic */ |
| spin_lock_irqsave(&priv->board->cmd_lock, flags); |
| |
| pciefd_can_writereg(priv, *(u32 *)ucan->cmd_buffer, |
| PCIEFD_REG_CAN_CMD_PORT_L); |
| pciefd_can_writereg(priv, *(u32 *)(ucan->cmd_buffer + 4), |
| PCIEFD_REG_CAN_CMD_PORT_H); |
| |
| spin_unlock_irqrestore(&priv->board->cmd_lock, flags); |
| |
| return 0; |
| } |
| |
| /* board specific CANFD command post-processing */ |
| static int pciefd_post_cmd(struct peak_canfd_priv *ucan) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd); |
| |
| switch (cmd) { |
| case PUCAN_CMD_RESET_MODE: |
| |
| if (ucan->can.state == CAN_STATE_STOPPED) |
| break; |
| |
| /* controller now in reset mode: */ |
| |
| /* disable IRQ for this CAN */ |
| pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, |
| PCIEFD_REG_CAN_RX_CTL_CLR); |
| |
| /* stop and reset DMA addresses in Tx/Rx engines */ |
| pciefd_can_clear_tx_dma(priv); |
| pciefd_can_clear_rx_dma(priv); |
| |
| /* wait for above commands to complete (read cycle) */ |
| (void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1); |
| |
| free_irq(priv->ucan.ndev->irq, priv); |
| |
| ucan->can.state = CAN_STATE_STOPPED; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void *pciefd_alloc_tx_msg(struct peak_canfd_priv *ucan, u16 msg_size, |
| int *room_left) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| struct pciefd_page *page = priv->tx_pages + priv->tx_page_index; |
| unsigned long flags; |
| void *msg; |
| |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| |
| if (page->offset + msg_size > page->size) { |
| struct pciefd_tx_link *lk; |
| |
| /* not enough space in this page: try another one */ |
| if (!priv->tx_pages_free) { |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| /* Tx overflow */ |
| return NULL; |
| } |
| |
| priv->tx_pages_free--; |
| |
| /* keep address of the very last free slot of current page */ |
| lk = page->vbase + page->offset; |
| |
| /* next, move on a new free page */ |
| priv->tx_page_index = (priv->tx_page_index + 1) % |
| PCIEFD_TX_PAGE_COUNT; |
| page = priv->tx_pages + priv->tx_page_index; |
| |
| /* put link record to this new page at the end of prev one */ |
| lk->size = cpu_to_le16(sizeof(*lk)); |
| lk->type = cpu_to_le16(CANFD_MSG_LNK_TX); |
| lk->laddr_lo = cpu_to_le32(page->lbase); |
| |
| #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| lk->laddr_hi = cpu_to_le32(page->lbase >> 32); |
| #else |
| lk->laddr_hi = 0; |
| #endif |
| /* next msgs will be put from the begininng of this new page */ |
| page->offset = 0; |
| } |
| |
| *room_left = priv->tx_pages_free * page->size; |
| |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| msg = page->vbase + page->offset; |
| |
| /* give back room left in the tx ring */ |
| *room_left += page->size - (page->offset + msg_size); |
| |
| return msg; |
| } |
| |
| static int pciefd_write_tx_msg(struct peak_canfd_priv *ucan, |
| struct pucan_tx_msg *msg) |
| { |
| struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| struct pciefd_page *page = priv->tx_pages + priv->tx_page_index; |
| |
| /* this slot is now reserved for writing the frame */ |
| page->offset += le16_to_cpu(msg->size); |
| |
| /* tell the board a frame has been written in Tx DMA area */ |
| pciefd_can_writereg(priv, 1, PCIEFD_REG_CAN_TX_REQ_ACC); |
| |
| return 0; |
| } |
| |
| /* probe for CAN-FD channel #pciefd_board->can_count */ |
| static int pciefd_can_probe(struct pciefd_board *pciefd) |
| { |
| struct net_device *ndev; |
| struct pciefd_can *priv; |
| u32 clk; |
| int err; |
| |
| /* allocate the candev object with default isize of echo skbs ring */ |
| ndev = alloc_peak_canfd_dev(sizeof(*priv), pciefd->can_count, |
| PCIEFD_ECHO_SKB_MAX); |
| if (!ndev) { |
| dev_err(&pciefd->pci_dev->dev, |
| "failed to alloc candev object\n"); |
| goto failure; |
| } |
| |
| priv = netdev_priv(ndev); |
| |
| /* fill-in candev private object: */ |
| |
| /* setup PCIe-FD own callbacks */ |
| priv->ucan.pre_cmd = pciefd_pre_cmd; |
| priv->ucan.write_cmd = pciefd_write_cmd; |
| priv->ucan.post_cmd = pciefd_post_cmd; |
| priv->ucan.enable_tx_path = pciefd_enable_tx_path; |
| priv->ucan.alloc_tx_msg = pciefd_alloc_tx_msg; |
| priv->ucan.write_tx_msg = pciefd_write_tx_msg; |
| |
| /* setup PCIe-FD own command buffer */ |
| priv->ucan.cmd_buffer = &priv->pucan_cmd; |
| priv->ucan.cmd_maxlen = sizeof(priv->pucan_cmd); |
| |
| priv->board = pciefd; |
| |
| /* CAN config regs block address */ |
| priv->reg_base = pciefd->reg_base + PCIEFD_CANX_OFF(priv->ucan.index); |
| |
| /* allocate non-cacheable DMA'able 4KB memory area for Rx */ |
| priv->rx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev, |
| PCIEFD_RX_DMA_SIZE, |
| &priv->rx_dma_laddr, |
| GFP_KERNEL); |
| if (!priv->rx_dma_vaddr) { |
| dev_err(&pciefd->pci_dev->dev, |
| "Rx dmam_alloc_coherent(%u) failure\n", |
| PCIEFD_RX_DMA_SIZE); |
| goto err_free_candev; |
| } |
| |
| /* allocate non-cacheable DMA'able 4KB memory area for Tx */ |
| priv->tx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev, |
| PCIEFD_TX_DMA_SIZE, |
| &priv->tx_dma_laddr, |
| GFP_KERNEL); |
| if (!priv->tx_dma_vaddr) { |
| dev_err(&pciefd->pci_dev->dev, |
| "Tx dmam_alloc_coherent(%u) failure\n", |
| PCIEFD_TX_DMA_SIZE); |
| goto err_free_candev; |
| } |
| |
| /* CAN clock in RST mode */ |
| pciefd_can_writereg(priv, CANFD_MISC_TS_RST, PCIEFD_REG_CAN_MISC); |
| |
| /* read current clock value */ |
| clk = pciefd_can_readreg(priv, PCIEFD_REG_CAN_CLK_SEL); |
| switch (clk) { |
| case CANFD_CLK_SEL_20MHZ: |
| priv->ucan.can.clock.freq = 20 * 1000 * 1000; |
| break; |
| case CANFD_CLK_SEL_24MHZ: |
| priv->ucan.can.clock.freq = 24 * 1000 * 1000; |
| break; |
| case CANFD_CLK_SEL_30MHZ: |
| priv->ucan.can.clock.freq = 30 * 1000 * 1000; |
| break; |
| case CANFD_CLK_SEL_40MHZ: |
| priv->ucan.can.clock.freq = 40 * 1000 * 1000; |
| break; |
| case CANFD_CLK_SEL_60MHZ: |
| priv->ucan.can.clock.freq = 60 * 1000 * 1000; |
| break; |
| default: |
| pciefd_can_writereg(priv, CANFD_CLK_SEL_80MHZ, |
| PCIEFD_REG_CAN_CLK_SEL); |
| |
| /* fallthough */ |
| case CANFD_CLK_SEL_80MHZ: |
| priv->ucan.can.clock.freq = 80 * 1000 * 1000; |
| break; |
| } |
| |
| ndev->irq = pciefd->pci_dev->irq; |
| |
| SET_NETDEV_DEV(ndev, &pciefd->pci_dev->dev); |
| |
| err = register_candev(ndev); |
| if (err) { |
| dev_err(&pciefd->pci_dev->dev, |
| "couldn't register CAN device: %d\n", err); |
| goto err_free_candev; |
| } |
| |
| spin_lock_init(&priv->tx_lock); |
| |
| /* save the object address in the board structure */ |
| pciefd->can[pciefd->can_count] = priv; |
| |
| dev_info(&pciefd->pci_dev->dev, "%s at reg_base=0x%p irq=%d\n", |
| ndev->name, priv->reg_base, ndev->irq); |
| |
| return 0; |
| |
| err_free_candev: |
| free_candev(ndev); |
| |
| failure: |
| return -ENOMEM; |
| } |
| |
| /* remove a CAN-FD channel by releasing all of its resources */ |
| static void pciefd_can_remove(struct pciefd_can *priv) |
| { |
| /* unregister (close) the can device to go back to RST mode first */ |
| unregister_candev(priv->ucan.ndev); |
| |
| /* finally, free the candev object */ |
| free_candev(priv->ucan.ndev); |
| } |
| |
| /* remove all CAN-FD channels by releasing their own resources */ |
| static void pciefd_can_remove_all(struct pciefd_board *pciefd) |
| { |
| while (pciefd->can_count > 0) |
| pciefd_can_remove(pciefd->can[--pciefd->can_count]); |
| } |
| |
| /* probe for the entire device */ |
| static int peak_pciefd_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct pciefd_board *pciefd; |
| int err, can_count; |
| u16 sub_sys_id; |
| u8 hw_ver_major; |
| u8 hw_ver_minor; |
| u8 hw_ver_sub; |
| u32 v2; |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| err = pci_request_regions(pdev, PCIEFD_DRV_NAME); |
| if (err) |
| goto err_disable_pci; |
| |
| /* the number of channels depends on sub-system id */ |
| err = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sub_sys_id); |
| if (err) |
| goto err_release_regions; |
| |
| dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", |
| pdev->vendor, pdev->device, sub_sys_id); |
| |
| if (sub_sys_id >= 0x0012) |
| can_count = 4; |
| else if (sub_sys_id >= 0x0010) |
| can_count = 3; |
| else if (sub_sys_id >= 0x0004) |
| can_count = 2; |
| else |
| can_count = 1; |
| |
| /* allocate board structure object */ |
| pciefd = devm_kzalloc(&pdev->dev, struct_size(pciefd, can, can_count), |
| GFP_KERNEL); |
| if (!pciefd) { |
| err = -ENOMEM; |
| goto err_release_regions; |
| } |
| |
| /* initialize the board structure */ |
| pciefd->pci_dev = pdev; |
| spin_lock_init(&pciefd->cmd_lock); |
| |
| /* save the PCI BAR0 virtual address for further system regs access */ |
| pciefd->reg_base = pci_iomap(pdev, 0, PCIEFD_BAR0_SIZE); |
| if (!pciefd->reg_base) { |
| dev_err(&pdev->dev, "failed to map PCI resource #0\n"); |
| err = -ENOMEM; |
| goto err_release_regions; |
| } |
| |
| /* read the firmware version number */ |
| v2 = pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER2); |
| |
| hw_ver_major = (v2 & 0x0000f000) >> 12; |
| hw_ver_minor = (v2 & 0x00000f00) >> 8; |
| hw_ver_sub = (v2 & 0x000000f0) >> 4; |
| |
| dev_info(&pdev->dev, |
| "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count, |
| hw_ver_major, hw_ver_minor, hw_ver_sub); |
| |
| #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| /* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and |
| * 64-bit logical addresses: this workaround forces usage of 32-bit |
| * DMA addresses only when such a fw is detected. |
| */ |
| if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) < |
| PCIEFD_FW_VERSION(3, 3, 0)) { |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| dev_warn(&pdev->dev, |
| "warning: can't set DMA mask %llxh (err %d)\n", |
| DMA_BIT_MASK(32), err); |
| } |
| #endif |
| |
| /* stop system clock */ |
| pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, |
| PCIEFD_REG_SYS_CTL_CLR); |
| |
| pci_set_master(pdev); |
| |
| /* create now the corresponding channels objects */ |
| while (pciefd->can_count < can_count) { |
| err = pciefd_can_probe(pciefd); |
| if (err) |
| goto err_free_canfd; |
| |
| pciefd->can_count++; |
| } |
| |
| /* set system timestamps counter in RST mode */ |
| pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST, |
| PCIEFD_REG_SYS_CTL_SET); |
| |
| /* wait a bit (read cycle) */ |
| (void)pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER1); |
| |
| /* free all clocks */ |
| pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST, |
| PCIEFD_REG_SYS_CTL_CLR); |
| |
| /* start system clock */ |
| pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, |
| PCIEFD_REG_SYS_CTL_SET); |
| |
| /* remember the board structure address in the device user data */ |
| pci_set_drvdata(pdev, pciefd); |
| |
| return 0; |
| |
| err_free_canfd: |
| pciefd_can_remove_all(pciefd); |
| |
| pci_iounmap(pdev, pciefd->reg_base); |
| |
| err_release_regions: |
| pci_release_regions(pdev); |
| |
| err_disable_pci: |
| pci_disable_device(pdev); |
| |
| /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while |
| * the probe() function must return a negative errno in case of failure |
| * (err is unchanged if negative) */ |
| return pcibios_err_to_errno(err); |
| } |
| |
| /* free the board structure object, as well as its resources: */ |
| static void peak_pciefd_remove(struct pci_dev *pdev) |
| { |
| struct pciefd_board *pciefd = pci_get_drvdata(pdev); |
| |
| /* release CAN-FD channels resources */ |
| pciefd_can_remove_all(pciefd); |
| |
| pci_iounmap(pdev, pciefd->reg_base); |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver peak_pciefd_driver = { |
| .name = PCIEFD_DRV_NAME, |
| .id_table = peak_pciefd_tbl, |
| .probe = peak_pciefd_probe, |
| .remove = peak_pciefd_remove, |
| }; |
| |
| module_pci_driver(peak_pciefd_driver); |