| /* | |
| * An I2C driver for the Philips PCF8563 RTC | |
| * Copyright 2005-06 Tower Technologies | |
| * | |
| * Author: Alessandro Zummo <a.zummo@towertech.it> | |
| * Maintainers: http://www.nslu2-linux.org/ | |
| * | |
| * based on the other drivers in this same directory. | |
| * | |
| * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/i2c.h> | |
| #include <linux/bcd.h> | |
| #include <linux/rtc.h> | |
| #define DRV_VERSION "0.4.2" | |
| /* Addresses to scan: none | |
| * This chip cannot be reliably autodetected. An empty eeprom | |
| * located at 0x51 will pass the validation routine due to | |
| * the way the registers are implemented. | |
| */ | |
| static unsigned short normal_i2c[] = { I2C_CLIENT_END }; | |
| /* Module parameters */ | |
| I2C_CLIENT_INSMOD; | |
| #define PCF8563_REG_ST1 0x00 /* status */ | |
| #define PCF8563_REG_ST2 0x01 | |
| #define PCF8563_REG_SC 0x02 /* datetime */ | |
| #define PCF8563_REG_MN 0x03 | |
| #define PCF8563_REG_HR 0x04 | |
| #define PCF8563_REG_DM 0x05 | |
| #define PCF8563_REG_DW 0x06 | |
| #define PCF8563_REG_MO 0x07 | |
| #define PCF8563_REG_YR 0x08 | |
| #define PCF8563_REG_AMN 0x09 /* alarm */ | |
| #define PCF8563_REG_AHR 0x0A | |
| #define PCF8563_REG_ADM 0x0B | |
| #define PCF8563_REG_ADW 0x0C | |
| #define PCF8563_REG_CLKO 0x0D /* clock out */ | |
| #define PCF8563_REG_TMRC 0x0E /* timer control */ | |
| #define PCF8563_REG_TMR 0x0F /* timer */ | |
| #define PCF8563_SC_LV 0x80 /* low voltage */ | |
| #define PCF8563_MO_C 0x80 /* century */ | |
| static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind); | |
| static int pcf8563_detach(struct i2c_client *client); | |
| /* | |
| * In the routines that deal directly with the pcf8563 hardware, we use | |
| * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. | |
| */ | |
| static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) | |
| { | |
| unsigned char buf[13] = { PCF8563_REG_ST1 }; | |
| struct i2c_msg msgs[] = { | |
| { client->addr, 0, 1, buf }, /* setup read ptr */ | |
| { client->addr, I2C_M_RD, 13, buf }, /* read status + date */ | |
| }; | |
| /* read registers */ | |
| if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { | |
| dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | |
| return -EIO; | |
| } | |
| if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) | |
| dev_info(&client->dev, | |
| "low voltage detected, date/time is not reliable.\n"); | |
| dev_dbg(&client->dev, | |
| "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " | |
| "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", | |
| __FUNCTION__, | |
| buf[0], buf[1], buf[2], buf[3], | |
| buf[4], buf[5], buf[6], buf[7], | |
| buf[8]); | |
| tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F); | |
| tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F); | |
| tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ | |
| tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F); | |
| tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; | |
| tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ | |
| tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR]) | |
| + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0); | |
| dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " | |
| "mday=%d, mon=%d, year=%d, wday=%d\n", | |
| __FUNCTION__, | |
| tm->tm_sec, tm->tm_min, tm->tm_hour, | |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | |
| /* the clock can give out invalid datetime, but we cannot return | |
| * -EINVAL otherwise hwclock will refuse to set the time on bootup. | |
| */ | |
| if (rtc_valid_tm(tm) < 0) | |
| dev_err(&client->dev, "retrieved date/time is not valid.\n"); | |
| return 0; | |
| } | |
| static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) | |
| { | |
| int i, err; | |
| unsigned char buf[9]; | |
| dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " | |
| "mday=%d, mon=%d, year=%d, wday=%d\n", | |
| __FUNCTION__, | |
| tm->tm_sec, tm->tm_min, tm->tm_hour, | |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | |
| /* hours, minutes and seconds */ | |
| buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec); | |
| buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min); | |
| buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour); | |
| buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday); | |
| /* month, 1 - 12 */ | |
| buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1); | |
| /* year and century */ | |
| buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100); | |
| if (tm->tm_year / 100) | |
| buf[PCF8563_REG_MO] |= PCF8563_MO_C; | |
| buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; | |
| /* write register's data */ | |
| for (i = 0; i < 7; i++) { | |
| unsigned char data[2] = { PCF8563_REG_SC + i, | |
| buf[PCF8563_REG_SC + i] }; | |
| err = i2c_master_send(client, data, sizeof(data)); | |
| if (err != sizeof(data)) { | |
| dev_err(&client->dev, | |
| "%s: err=%d addr=%02x, data=%02x\n", | |
| __FUNCTION__, err, data[0], data[1]); | |
| return -EIO; | |
| } | |
| }; | |
| return 0; | |
| } | |
| struct pcf8563_limit | |
| { | |
| unsigned char reg; | |
| unsigned char mask; | |
| unsigned char min; | |
| unsigned char max; | |
| }; | |
| static int pcf8563_validate_client(struct i2c_client *client) | |
| { | |
| int i; | |
| static const struct pcf8563_limit pattern[] = { | |
| /* register, mask, min, max */ | |
| { PCF8563_REG_SC, 0x7F, 0, 59 }, | |
| { PCF8563_REG_MN, 0x7F, 0, 59 }, | |
| { PCF8563_REG_HR, 0x3F, 0, 23 }, | |
| { PCF8563_REG_DM, 0x3F, 0, 31 }, | |
| { PCF8563_REG_MO, 0x1F, 0, 12 }, | |
| }; | |
| /* check limits (only registers with bcd values) */ | |
| for (i = 0; i < ARRAY_SIZE(pattern); i++) { | |
| int xfer; | |
| unsigned char value; | |
| unsigned char buf = pattern[i].reg; | |
| struct i2c_msg msgs[] = { | |
| { client->addr, 0, 1, &buf }, | |
| { client->addr, I2C_M_RD, 1, &buf }, | |
| }; | |
| xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); | |
| if (xfer != ARRAY_SIZE(msgs)) { | |
| dev_err(&client->adapter->dev, | |
| "%s: could not read register 0x%02X\n", | |
| __FUNCTION__, pattern[i].reg); | |
| return -EIO; | |
| } | |
| value = BCD2BIN(buf & pattern[i].mask); | |
| if (value > pattern[i].max || | |
| value < pattern[i].min) { | |
| dev_dbg(&client->adapter->dev, | |
| "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, " | |
| "max=%d, value=%d, raw=0x%02X\n", | |
| __FUNCTION__, i, pattern[i].reg, pattern[i].mask, | |
| pattern[i].min, pattern[i].max, | |
| value, buf); | |
| return -ENODEV; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| return pcf8563_get_datetime(to_i2c_client(dev), tm); | |
| } | |
| static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| return pcf8563_set_datetime(to_i2c_client(dev), tm); | |
| } | |
| static struct rtc_class_ops pcf8563_rtc_ops = { | |
| .read_time = pcf8563_rtc_read_time, | |
| .set_time = pcf8563_rtc_set_time, | |
| }; | |
| static int pcf8563_attach(struct i2c_adapter *adapter) | |
| { | |
| return i2c_probe(adapter, &addr_data, pcf8563_probe); | |
| } | |
| static struct i2c_driver pcf8563_driver = { | |
| .driver = { | |
| .name = "pcf8563", | |
| }, | |
| .id = I2C_DRIVERID_PCF8563, | |
| .attach_adapter = &pcf8563_attach, | |
| .detach_client = &pcf8563_detach, | |
| }; | |
| static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) | |
| { | |
| struct i2c_client *client; | |
| struct rtc_device *rtc; | |
| int err = 0; | |
| dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| client->addr = address; | |
| client->driver = &pcf8563_driver; | |
| client->adapter = adapter; | |
| strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE); | |
| /* Verify the chip is really an PCF8563 */ | |
| if (kind < 0) { | |
| if (pcf8563_validate_client(client) < 0) { | |
| err = -ENODEV; | |
| goto exit_kfree; | |
| } | |
| } | |
| /* Inform the i2c layer */ | |
| if ((err = i2c_attach_client(client))) | |
| goto exit_kfree; | |
| dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); | |
| rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev, | |
| &pcf8563_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(rtc)) { | |
| err = PTR_ERR(rtc); | |
| goto exit_detach; | |
| } | |
| i2c_set_clientdata(client, rtc); | |
| return 0; | |
| exit_detach: | |
| i2c_detach_client(client); | |
| exit_kfree: | |
| kfree(client); | |
| exit: | |
| return err; | |
| } | |
| static int pcf8563_detach(struct i2c_client *client) | |
| { | |
| int err; | |
| struct rtc_device *rtc = i2c_get_clientdata(client); | |
| if (rtc) | |
| rtc_device_unregister(rtc); | |
| if ((err = i2c_detach_client(client))) | |
| return err; | |
| kfree(client); | |
| return 0; | |
| } | |
| static int __init pcf8563_init(void) | |
| { | |
| return i2c_add_driver(&pcf8563_driver); | |
| } | |
| static void __exit pcf8563_exit(void) | |
| { | |
| i2c_del_driver(&pcf8563_driver); | |
| } | |
| MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); | |
| MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(DRV_VERSION); | |
| module_init(pcf8563_init); | |
| module_exit(pcf8563_exit); |