| /* $Id: elf.h,v 1.32 2002/02/09 19:49:31 davem Exp $ */ | |
| #ifndef __ASM_SPARC64_ELF_H | |
| #define __ASM_SPARC64_ELF_H | |
| /* | |
| * ELF register definitions.. | |
| */ | |
| #include <asm/ptrace.h> | |
| #ifdef __KERNEL__ | |
| #include <asm/processor.h> | |
| #include <asm/uaccess.h> | |
| #endif | |
| /* | |
| * Sparc section types | |
| */ | |
| #define STT_REGISTER 13 | |
| /* | |
| * Sparc ELF relocation types | |
| */ | |
| #define R_SPARC_NONE 0 | |
| #define R_SPARC_8 1 | |
| #define R_SPARC_16 2 | |
| #define R_SPARC_32 3 | |
| #define R_SPARC_DISP8 4 | |
| #define R_SPARC_DISP16 5 | |
| #define R_SPARC_DISP32 6 | |
| #define R_SPARC_WDISP30 7 | |
| #define R_SPARC_WDISP22 8 | |
| #define R_SPARC_HI22 9 | |
| #define R_SPARC_22 10 | |
| #define R_SPARC_13 11 | |
| #define R_SPARC_LO10 12 | |
| #define R_SPARC_GOT10 13 | |
| #define R_SPARC_GOT13 14 | |
| #define R_SPARC_GOT22 15 | |
| #define R_SPARC_PC10 16 | |
| #define R_SPARC_PC22 17 | |
| #define R_SPARC_WPLT30 18 | |
| #define R_SPARC_COPY 19 | |
| #define R_SPARC_GLOB_DAT 20 | |
| #define R_SPARC_JMP_SLOT 21 | |
| #define R_SPARC_RELATIVE 22 | |
| #define R_SPARC_UA32 23 | |
| #define R_SPARC_PLT32 24 | |
| #define R_SPARC_HIPLT22 25 | |
| #define R_SPARC_LOPLT10 26 | |
| #define R_SPARC_PCPLT32 27 | |
| #define R_SPARC_PCPLT22 28 | |
| #define R_SPARC_PCPLT10 29 | |
| #define R_SPARC_10 30 | |
| #define R_SPARC_11 31 | |
| #define R_SPARC_64 32 | |
| #define R_SPARC_OLO10 33 | |
| #define R_SPARC_WDISP16 40 | |
| #define R_SPARC_WDISP19 41 | |
| #define R_SPARC_7 43 | |
| #define R_SPARC_5 44 | |
| #define R_SPARC_6 45 | |
| /* Bits present in AT_HWCAP, primarily for Sparc32. */ | |
| #define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */ | |
| #define HWCAP_SPARC_STBAR 2 | |
| #define HWCAP_SPARC_SWAP 4 | |
| #define HWCAP_SPARC_MULDIV 8 | |
| #define HWCAP_SPARC_V9 16 | |
| #define HWCAP_SPARC_ULTRA3 32 | |
| /* | |
| * These are used to set parameters in the core dumps. | |
| */ | |
| #ifndef ELF_ARCH | |
| #define ELF_ARCH EM_SPARCV9 | |
| #define ELF_CLASS ELFCLASS64 | |
| #define ELF_DATA ELFDATA2MSB | |
| typedef unsigned long elf_greg_t; | |
| #define ELF_NGREG 36 | |
| typedef elf_greg_t elf_gregset_t[ELF_NGREG]; | |
| /* Format of 64-bit elf_gregset_t is: | |
| * G0 --> G7 | |
| * O0 --> O7 | |
| * L0 --> L7 | |
| * I0 --> I7 | |
| * TSTATE | |
| * TPC | |
| * TNPC | |
| * Y | |
| */ | |
| #define ELF_CORE_COPY_REGS(__elf_regs, __pt_regs) \ | |
| do { unsigned long *dest = &(__elf_regs[0]); \ | |
| struct pt_regs *src = (__pt_regs); \ | |
| unsigned long __user *sp; \ | |
| int i; \ | |
| for(i = 0; i < 16; i++) \ | |
| dest[i] = src->u_regs[i]; \ | |
| /* Don't try this at home kids... */ \ | |
| sp = (unsigned long __user *) \ | |
| ((src->u_regs[14] + STACK_BIAS) \ | |
| & 0xfffffffffffffff8UL); \ | |
| for(i = 0; i < 16; i++) \ | |
| __get_user(dest[i+16], &sp[i]); \ | |
| dest[32] = src->tstate; \ | |
| dest[33] = src->tpc; \ | |
| dest[34] = src->tnpc; \ | |
| dest[35] = src->y; \ | |
| } while (0); | |
| typedef struct { | |
| unsigned long pr_regs[32]; | |
| unsigned long pr_fsr; | |
| unsigned long pr_gsr; | |
| unsigned long pr_fprs; | |
| } elf_fpregset_t; | |
| #endif | |
| #define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs) \ | |
| ({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread_info->kregs); 1; }) | |
| /* | |
| * This is used to ensure we don't load something for the wrong architecture. | |
| */ | |
| #ifndef elf_check_arch | |
| #define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) /* Might be EM_SPARCV9 or EM_SPARC */ | |
| #endif | |
| #define USE_ELF_CORE_DUMP | |
| #define ELF_EXEC_PAGESIZE PAGE_SIZE | |
| /* This is the location that an ET_DYN program is loaded if exec'ed. Typical | |
| use of this is to invoke "./ld.so someprog" to test out a new version of | |
| the loader. We need to make sure that it is out of the way of the program | |
| that it will "exec", and that there is sufficient room for the brk. */ | |
| #ifndef ELF_ET_DYN_BASE | |
| #define ELF_ET_DYN_BASE 0x0000010000000000UL | |
| #endif | |
| /* This yields a mask that user programs can use to figure out what | |
| instruction set this cpu supports. */ | |
| /* On Ultra, we support all of the v8 capabilities. */ | |
| #define ELF_HWCAP ((HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ | |
| HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV | \ | |
| HWCAP_SPARC_V9) | \ | |
| ((tlb_type == cheetah || tlb_type == cheetah_plus) ? \ | |
| HWCAP_SPARC_ULTRA3 : 0)) | |
| /* This yields a string that ld.so will use to load implementation | |
| specific libraries for optimization. This is more specific in | |
| intent than poking at uname or /proc/cpuinfo. */ | |
| #define ELF_PLATFORM (NULL) | |
| #ifdef __KERNEL__ | |
| #define SET_PERSONALITY(ex, ibcs2) \ | |
| do { unsigned long new_flags = current_thread_info()->flags; \ | |
| new_flags &= _TIF_32BIT; \ | |
| if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ | |
| new_flags |= _TIF_32BIT; \ | |
| else \ | |
| new_flags &= ~_TIF_32BIT; \ | |
| if ((current_thread_info()->flags & _TIF_32BIT) \ | |
| != new_flags) \ | |
| set_thread_flag(TIF_ABI_PENDING); \ | |
| else \ | |
| clear_thread_flag(TIF_ABI_PENDING); \ | |
| /* flush_thread will update pgd cache */ \ | |
| if (ibcs2) \ | |
| set_personality(PER_SVR4); \ | |
| else if (current->personality != PER_LINUX32) \ | |
| set_personality(PER_LINUX); \ | |
| } while (0) | |
| #endif | |
| #endif /* !(__ASM_SPARC64_ELF_H) */ |