| DVI Connector |
| ============== |
| |
| Required properties: |
| - compatible: "dvi-connector" |
| |
| Optional properties: |
| - label: a symbolic name for the connector |
| - ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC |
| - analog: the connector has DVI analog pins |
| - digital: the connector has DVI digital pins |
| - dual-link: the connector has pins for DVI dual-link |
| - hpd-gpios: HPD GPIO number |
| |
| Required nodes: |
| - Video port for DVI input |
| |
| Note: One (or both) of 'analog' or 'digital' must be set. |
| |
| Example |
| ------- |
| |
| dvi0: connector@0 { |
| compatible = "dvi-connector"; |
| label = "dvi"; |
| |
| digital; |
| |
| ddc-i2c-bus = <&i2c3>; |
| |
| port { |
| dvi_connector_in: endpoint { |
| remote-endpoint = <&tfp410_out>; |
| }; |
| }; |
| }; |
