| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Helper routines for R-Car sound ADG. |
| // |
| // Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| |
| #include <linux/clk-provider.h> |
| #include "rsnd.h" |
| |
| #define CLKA 0 |
| #define CLKB 1 |
| #define CLKC 2 |
| #define CLKI 3 |
| #define CLKMAX 4 |
| |
| #define CLKOUT 0 |
| #define CLKOUT1 1 |
| #define CLKOUT2 2 |
| #define CLKOUT3 3 |
| #define CLKOUTMAX 4 |
| |
| #define BRRx_MASK(x) (0x3FF & x) |
| |
| static struct rsnd_mod_ops adg_ops = { |
| .name = "adg", |
| }; |
| |
| struct rsnd_adg { |
| struct clk *clk[CLKMAX]; |
| struct clk *clkout[CLKOUTMAX]; |
| struct clk_onecell_data onecell; |
| struct rsnd_mod mod; |
| int clk_rate[CLKMAX]; |
| u32 flags; |
| u32 ckr; |
| u32 rbga; |
| u32 rbgb; |
| |
| int rbga_rate_for_441khz; /* RBGA */ |
| int rbgb_rate_for_48khz; /* RBGB */ |
| }; |
| |
| #define LRCLK_ASYNC (1 << 0) |
| #define AUDIO_OUT_48 (1 << 1) |
| |
| #define for_each_rsnd_clk(pos, adg, i) \ |
| for (i = 0; \ |
| (i < CLKMAX) && \ |
| ((pos) = adg->clk[i]); \ |
| i++) |
| #define for_each_rsnd_clkout(pos, adg, i) \ |
| for (i = 0; \ |
| (i < CLKOUTMAX) && \ |
| ((pos) = adg->clkout[i]); \ |
| i++) |
| #define rsnd_priv_to_adg(priv) ((struct rsnd_adg *)(priv)->adg) |
| |
| static const char * const clk_name[] = { |
| [CLKA] = "clk_a", |
| [CLKB] = "clk_b", |
| [CLKC] = "clk_c", |
| [CLKI] = "clk_i", |
| }; |
| |
| static u32 rsnd_adg_calculate_rbgx(unsigned long div) |
| { |
| int i, ratio; |
| |
| if (!div) |
| return 0; |
| |
| for (i = 3; i >= 0; i--) { |
| ratio = 2 << (i * 2); |
| if (0 == (div % ratio)) |
| return (u32)((i << 8) | ((div / ratio) - 1)); |
| } |
| |
| return ~0; |
| } |
| |
| static u32 rsnd_adg_ssi_ws_timing_gen2(struct rsnd_dai_stream *io) |
| { |
| struct rsnd_mod *ssi_mod = rsnd_io_to_mod_ssi(io); |
| int id = rsnd_mod_id(ssi_mod); |
| int ws = id; |
| |
| if (rsnd_ssi_is_pin_sharing(io)) { |
| switch (id) { |
| case 1: |
| case 2: |
| ws = 0; |
| break; |
| case 4: |
| ws = 3; |
| break; |
| case 8: |
| ws = 7; |
| break; |
| } |
| } |
| |
| return (0x6 + ws) << 8; |
| } |
| |
| static void __rsnd_adg_get_timesel_ratio(struct rsnd_priv *priv, |
| struct rsnd_dai_stream *io, |
| unsigned int target_rate, |
| unsigned int *target_val, |
| unsigned int *target_en) |
| { |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct device *dev = rsnd_priv_to_dev(priv); |
| int idx, sel, div, step; |
| unsigned int val, en; |
| unsigned int min, diff; |
| unsigned int sel_rate[] = { |
| adg->clk_rate[CLKA], /* 0000: CLKA */ |
| adg->clk_rate[CLKB], /* 0001: CLKB */ |
| adg->clk_rate[CLKC], /* 0010: CLKC */ |
| adg->rbga_rate_for_441khz, /* 0011: RBGA */ |
| adg->rbgb_rate_for_48khz, /* 0100: RBGB */ |
| }; |
| |
| min = ~0; |
| val = 0; |
| en = 0; |
| for (sel = 0; sel < ARRAY_SIZE(sel_rate); sel++) { |
| idx = 0; |
| step = 2; |
| |
| if (!sel_rate[sel]) |
| continue; |
| |
| for (div = 2; div <= 98304; div += step) { |
| diff = abs(target_rate - sel_rate[sel] / div); |
| if (min > diff) { |
| val = (sel << 8) | idx; |
| min = diff; |
| en = 1 << (sel + 1); /* fixme */ |
| } |
| |
| /* |
| * step of 0_0000 / 0_0001 / 0_1101 |
| * are out of order |
| */ |
| if ((idx > 2) && (idx % 2)) |
| step *= 2; |
| if (idx == 0x1c) { |
| div += step; |
| step *= 2; |
| } |
| idx++; |
| } |
| } |
| |
| if (min == ~0) { |
| dev_err(dev, "no Input clock\n"); |
| return; |
| } |
| |
| *target_val = val; |
| if (target_en) |
| *target_en = en; |
| } |
| |
| static void rsnd_adg_get_timesel_ratio(struct rsnd_priv *priv, |
| struct rsnd_dai_stream *io, |
| unsigned int in_rate, |
| unsigned int out_rate, |
| u32 *in, u32 *out, u32 *en) |
| { |
| struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); |
| unsigned int target_rate; |
| u32 *target_val; |
| u32 _in; |
| u32 _out; |
| u32 _en; |
| |
| /* default = SSI WS */ |
| _in = |
| _out = rsnd_adg_ssi_ws_timing_gen2(io); |
| |
| target_rate = 0; |
| target_val = NULL; |
| _en = 0; |
| if (runtime->rate != in_rate) { |
| target_rate = out_rate; |
| target_val = &_out; |
| } else if (runtime->rate != out_rate) { |
| target_rate = in_rate; |
| target_val = &_in; |
| } |
| |
| if (target_rate) |
| __rsnd_adg_get_timesel_ratio(priv, io, |
| target_rate, |
| target_val, &_en); |
| |
| if (in) |
| *in = _in; |
| if (out) |
| *out = _out; |
| if (en) |
| *en = _en; |
| } |
| |
| int rsnd_adg_set_cmd_timsel_gen2(struct rsnd_mod *cmd_mod, |
| struct rsnd_dai_stream *io) |
| { |
| struct rsnd_priv *priv = rsnd_mod_to_priv(cmd_mod); |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct rsnd_mod *adg_mod = rsnd_mod_get(adg); |
| int id = rsnd_mod_id(cmd_mod); |
| int shift = (id % 2) ? 16 : 0; |
| u32 mask, val; |
| |
| rsnd_adg_get_timesel_ratio(priv, io, |
| rsnd_src_get_in_rate(priv, io), |
| rsnd_src_get_out_rate(priv, io), |
| NULL, &val, NULL); |
| |
| val = val << shift; |
| mask = 0x0f1f << shift; |
| |
| rsnd_mod_bset(adg_mod, CMDOUT_TIMSEL, mask, val); |
| |
| return 0; |
| } |
| |
| int rsnd_adg_set_src_timesel_gen2(struct rsnd_mod *src_mod, |
| struct rsnd_dai_stream *io, |
| unsigned int in_rate, |
| unsigned int out_rate) |
| { |
| struct rsnd_priv *priv = rsnd_mod_to_priv(src_mod); |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct rsnd_mod *adg_mod = rsnd_mod_get(adg); |
| u32 in, out; |
| u32 mask, en; |
| int id = rsnd_mod_id(src_mod); |
| int shift = (id % 2) ? 16 : 0; |
| |
| rsnd_mod_confirm_src(src_mod); |
| |
| rsnd_adg_get_timesel_ratio(priv, io, |
| in_rate, out_rate, |
| &in, &out, &en); |
| |
| in = in << shift; |
| out = out << shift; |
| mask = 0x0f1f << shift; |
| |
| switch (id / 2) { |
| case 0: |
| rsnd_mod_bset(adg_mod, SRCIN_TIMSEL0, mask, in); |
| rsnd_mod_bset(adg_mod, SRCOUT_TIMSEL0, mask, out); |
| break; |
| case 1: |
| rsnd_mod_bset(adg_mod, SRCIN_TIMSEL1, mask, in); |
| rsnd_mod_bset(adg_mod, SRCOUT_TIMSEL1, mask, out); |
| break; |
| case 2: |
| rsnd_mod_bset(adg_mod, SRCIN_TIMSEL2, mask, in); |
| rsnd_mod_bset(adg_mod, SRCOUT_TIMSEL2, mask, out); |
| break; |
| case 3: |
| rsnd_mod_bset(adg_mod, SRCIN_TIMSEL3, mask, in); |
| rsnd_mod_bset(adg_mod, SRCOUT_TIMSEL3, mask, out); |
| break; |
| case 4: |
| rsnd_mod_bset(adg_mod, SRCIN_TIMSEL4, mask, in); |
| rsnd_mod_bset(adg_mod, SRCOUT_TIMSEL4, mask, out); |
| break; |
| } |
| |
| if (en) |
| rsnd_mod_bset(adg_mod, DIV_EN, en, en); |
| |
| return 0; |
| } |
| |
| static void rsnd_adg_set_ssi_clk(struct rsnd_mod *ssi_mod, u32 val) |
| { |
| struct rsnd_priv *priv = rsnd_mod_to_priv(ssi_mod); |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct rsnd_mod *adg_mod = rsnd_mod_get(adg); |
| struct device *dev = rsnd_priv_to_dev(priv); |
| int id = rsnd_mod_id(ssi_mod); |
| int shift = (id % 4) * 8; |
| u32 mask = 0xFF << shift; |
| |
| rsnd_mod_confirm_ssi(ssi_mod); |
| |
| val = val << shift; |
| |
| /* |
| * SSI 8 is not connected to ADG. |
| * it works with SSI 7 |
| */ |
| if (id == 8) |
| return; |
| |
| switch (id / 4) { |
| case 0: |
| rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL0, mask, val); |
| break; |
| case 1: |
| rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL1, mask, val); |
| break; |
| case 2: |
| rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL2, mask, val); |
| break; |
| } |
| |
| dev_dbg(dev, "AUDIO_CLK_SEL is 0x%x\n", val); |
| } |
| |
| int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate) |
| { |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct clk *clk; |
| int i; |
| int sel_table[] = { |
| [CLKA] = 0x1, |
| [CLKB] = 0x2, |
| [CLKC] = 0x3, |
| [CLKI] = 0x0, |
| }; |
| |
| /* |
| * find suitable clock from |
| * AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI. |
| */ |
| for_each_rsnd_clk(clk, adg, i) { |
| if (rate == adg->clk_rate[i]) |
| return sel_table[i]; |
| } |
| |
| /* |
| * find divided clock from BRGA/BRGB |
| */ |
| if (rate == adg->rbga_rate_for_441khz) |
| return 0x10; |
| |
| if (rate == adg->rbgb_rate_for_48khz) |
| return 0x20; |
| |
| return -EIO; |
| } |
| |
| int rsnd_adg_ssi_clk_stop(struct rsnd_mod *ssi_mod) |
| { |
| rsnd_adg_set_ssi_clk(ssi_mod, 0); |
| |
| return 0; |
| } |
| |
| int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *ssi_mod, unsigned int rate) |
| { |
| struct rsnd_priv *priv = rsnd_mod_to_priv(ssi_mod); |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct rsnd_mod *adg_mod = rsnd_mod_get(adg); |
| int data; |
| u32 ckr = 0; |
| |
| data = rsnd_adg_clk_query(priv, rate); |
| if (data < 0) |
| return data; |
| |
| rsnd_adg_set_ssi_clk(ssi_mod, data); |
| |
| if (rsnd_flags_has(adg, LRCLK_ASYNC)) { |
| if (rsnd_flags_has(adg, AUDIO_OUT_48)) |
| ckr = 0x80000000; |
| } else { |
| if (0 == (rate % 8000)) |
| ckr = 0x80000000; |
| } |
| |
| rsnd_mod_bset(adg_mod, BRGCKR, 0x80770000, adg->ckr | ckr); |
| rsnd_mod_write(adg_mod, BRRA, adg->rbga); |
| rsnd_mod_write(adg_mod, BRRB, adg->rbgb); |
| |
| dev_dbg(dev, "CLKOUT is based on BRG%c (= %dHz)\n", |
| (ckr) ? 'B' : 'A', |
| (ckr) ? adg->rbgb_rate_for_48khz : |
| adg->rbga_rate_for_441khz); |
| |
| return 0; |
| } |
| |
| void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable) |
| { |
| struct rsnd_adg *adg = rsnd_priv_to_adg(priv); |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct clk *clk; |
| int i, ret; |
| |
| for_each_rsnd_clk(clk, adg, i) { |
| ret = 0; |
| if (enable) { |
| ret = clk_prepare_enable(clk); |
| |
| /* |
| * We shouldn't use clk_get_rate() under |
| * atomic context. Let's keep it when |
| * rsnd_adg_clk_enable() was called |
| */ |
| adg->clk_rate[i] = clk_get_rate(adg->clk[i]); |
| } else { |
| clk_disable_unprepare(clk); |
| } |
| |
| if (ret < 0) |
| dev_warn(dev, "can't use clk %d\n", i); |
| } |
| } |
| |
| static void rsnd_adg_get_clkin(struct rsnd_priv *priv, |
| struct rsnd_adg *adg) |
| { |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct clk *clk; |
| int i; |
| |
| for (i = 0; i < CLKMAX; i++) { |
| clk = devm_clk_get(dev, clk_name[i]); |
| adg->clk[i] = IS_ERR(clk) ? NULL : clk; |
| } |
| } |
| |
| static void rsnd_adg_get_clkout(struct rsnd_priv *priv, |
| struct rsnd_adg *adg) |
| { |
| struct clk *clk; |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct device_node *np = dev->of_node; |
| struct property *prop; |
| u32 ckr, rbgx, rbga, rbgb; |
| u32 rate, div; |
| #define REQ_SIZE 2 |
| u32 req_rate[REQ_SIZE] = {}; |
| uint32_t count = 0; |
| unsigned long req_48kHz_rate, req_441kHz_rate; |
| int i, req_size; |
| const char *parent_clk_name = NULL; |
| static const char * const clkout_name[] = { |
| [CLKOUT] = "audio_clkout", |
| [CLKOUT1] = "audio_clkout1", |
| [CLKOUT2] = "audio_clkout2", |
| [CLKOUT3] = "audio_clkout3", |
| }; |
| int brg_table[] = { |
| [CLKA] = 0x0, |
| [CLKB] = 0x1, |
| [CLKC] = 0x4, |
| [CLKI] = 0x2, |
| }; |
| |
| ckr = 0; |
| rbga = 2; /* default 1/6 */ |
| rbgb = 2; /* default 1/6 */ |
| |
| /* |
| * ADG supports BRRA/BRRB output only |
| * this means all clkout0/1/2/3 will be same rate |
| */ |
| prop = of_find_property(np, "clock-frequency", NULL); |
| if (!prop) |
| goto rsnd_adg_get_clkout_end; |
| |
| req_size = prop->length / sizeof(u32); |
| if (req_size > REQ_SIZE) { |
| dev_err(dev, |
| "too many clock-frequency, use top %d\n", REQ_SIZE); |
| req_size = REQ_SIZE; |
| } |
| |
| of_property_read_u32_array(np, "clock-frequency", req_rate, req_size); |
| req_48kHz_rate = 0; |
| req_441kHz_rate = 0; |
| for (i = 0; i < req_size; i++) { |
| if (0 == (req_rate[i] % 44100)) |
| req_441kHz_rate = req_rate[i]; |
| if (0 == (req_rate[i] % 48000)) |
| req_48kHz_rate = req_rate[i]; |
| } |
| |
| if (req_rate[0] % 48000 == 0) |
| rsnd_flags_set(adg, AUDIO_OUT_48); |
| |
| if (of_get_property(np, "clkout-lr-asynchronous", NULL)) |
| rsnd_flags_set(adg, LRCLK_ASYNC); |
| |
| /* |
| * This driver is assuming that AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC |
| * have 44.1kHz or 48kHz base clocks for now. |
| * |
| * SSI itself can divide parent clock by 1/1 - 1/16 |
| * see |
| * rsnd_adg_ssi_clk_try_start() |
| * rsnd_ssi_master_clk_start() |
| */ |
| adg->rbga_rate_for_441khz = 0; |
| adg->rbgb_rate_for_48khz = 0; |
| for_each_rsnd_clk(clk, adg, i) { |
| rate = clk_get_rate(clk); |
| |
| if (0 == rate) /* not used */ |
| continue; |
| |
| /* RBGA */ |
| if (!adg->rbga_rate_for_441khz && (0 == rate % 44100)) { |
| div = 6; |
| if (req_441kHz_rate) |
| div = rate / req_441kHz_rate; |
| rbgx = rsnd_adg_calculate_rbgx(div); |
| if (BRRx_MASK(rbgx) == rbgx) { |
| rbga = rbgx; |
| adg->rbga_rate_for_441khz = rate / div; |
| ckr |= brg_table[i] << 20; |
| if (req_441kHz_rate && |
| !rsnd_flags_has(adg, AUDIO_OUT_48)) |
| parent_clk_name = __clk_get_name(clk); |
| } |
| } |
| |
| /* RBGB */ |
| if (!adg->rbgb_rate_for_48khz && (0 == rate % 48000)) { |
| div = 6; |
| if (req_48kHz_rate) |
| div = rate / req_48kHz_rate; |
| rbgx = rsnd_adg_calculate_rbgx(div); |
| if (BRRx_MASK(rbgx) == rbgx) { |
| rbgb = rbgx; |
| adg->rbgb_rate_for_48khz = rate / div; |
| ckr |= brg_table[i] << 16; |
| if (req_48kHz_rate && |
| rsnd_flags_has(adg, AUDIO_OUT_48)) |
| parent_clk_name = __clk_get_name(clk); |
| } |
| } |
| } |
| |
| /* |
| * ADG supports BRRA/BRRB output only. |
| * this means all clkout0/1/2/3 will be * same rate |
| */ |
| |
| of_property_read_u32(np, "#clock-cells", &count); |
| /* |
| * for clkout |
| */ |
| if (!count) { |
| clk = clk_register_fixed_rate(dev, clkout_name[CLKOUT], |
| parent_clk_name, 0, req_rate[0]); |
| if (!IS_ERR(clk)) { |
| adg->clkout[CLKOUT] = clk; |
| of_clk_add_provider(np, of_clk_src_simple_get, clk); |
| } |
| } |
| /* |
| * for clkout0/1/2/3 |
| */ |
| else { |
| for (i = 0; i < CLKOUTMAX; i++) { |
| clk = clk_register_fixed_rate(dev, clkout_name[i], |
| parent_clk_name, 0, |
| req_rate[0]); |
| if (!IS_ERR(clk)) |
| adg->clkout[i] = clk; |
| } |
| adg->onecell.clks = adg->clkout; |
| adg->onecell.clk_num = CLKOUTMAX; |
| of_clk_add_provider(np, of_clk_src_onecell_get, |
| &adg->onecell); |
| } |
| |
| rsnd_adg_get_clkout_end: |
| adg->ckr = ckr; |
| adg->rbga = rbga; |
| adg->rbgb = rbgb; |
| } |
| |
| #ifdef DEBUG |
| static void rsnd_adg_clk_dbg_info(struct rsnd_priv *priv, struct rsnd_adg *adg) |
| { |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct clk *clk; |
| int i; |
| |
| for_each_rsnd_clk(clk, adg, i) |
| dev_dbg(dev, "%s : %p : %ld\n", |
| clk_name[i], clk, clk_get_rate(clk)); |
| |
| dev_dbg(dev, "BRGCKR = 0x%08x, BRRA/BRRB = 0x%x/0x%x\n", |
| adg->ckr, adg->rbga, adg->rbgb); |
| dev_dbg(dev, "BRGA (for 44100 base) = %d\n", adg->rbga_rate_for_441khz); |
| dev_dbg(dev, "BRGB (for 48000 base) = %d\n", adg->rbgb_rate_for_48khz); |
| |
| /* |
| * Actual CLKOUT will be exchanged in rsnd_adg_ssi_clk_try_start() |
| * by BRGCKR::BRGCKR_31 |
| */ |
| for_each_rsnd_clkout(clk, adg, i) |
| dev_dbg(dev, "clkout %d : %p : %ld\n", i, |
| clk, clk_get_rate(clk)); |
| } |
| #else |
| #define rsnd_adg_clk_dbg_info(priv, adg) |
| #endif |
| |
| int rsnd_adg_probe(struct rsnd_priv *priv) |
| { |
| struct rsnd_adg *adg; |
| struct device *dev = rsnd_priv_to_dev(priv); |
| int ret; |
| |
| adg = devm_kzalloc(dev, sizeof(*adg), GFP_KERNEL); |
| if (!adg) |
| return -ENOMEM; |
| |
| ret = rsnd_mod_init(priv, &adg->mod, &adg_ops, |
| NULL, NULL, 0, 0); |
| if (ret) |
| return ret; |
| |
| rsnd_adg_get_clkin(priv, adg); |
| rsnd_adg_get_clkout(priv, adg); |
| rsnd_adg_clk_dbg_info(priv, adg); |
| |
| priv->adg = adg; |
| |
| rsnd_adg_clk_enable(priv); |
| |
| return 0; |
| } |
| |
| void rsnd_adg_remove(struct rsnd_priv *priv) |
| { |
| struct device *dev = rsnd_priv_to_dev(priv); |
| struct device_node *np = dev->of_node; |
| struct rsnd_adg *adg = priv->adg; |
| struct clk *clk; |
| int i; |
| |
| for_each_rsnd_clkout(clk, adg, i) |
| if (adg->clkout[i]) |
| clk_unregister_fixed_rate(adg->clkout[i]); |
| |
| of_clk_del_provider(np); |
| |
| rsnd_adg_clk_disable(priv); |
| } |