| /* |
| * Copyright 2016,2017 IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) "xive: " fmt |
| |
| #include <linux/types.h> |
| #include <linux/irq.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/cpumask.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| |
| #include <asm/prom.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/irq.h> |
| #include <asm/errno.h> |
| #include <asm/xive.h> |
| #include <asm/xive-regs.h> |
| #include <asm/hvcall.h> |
| |
| #include "xive-internal.h" |
| |
| static u32 xive_queue_shift; |
| |
| struct xive_irq_bitmap { |
| unsigned long *bitmap; |
| unsigned int base; |
| unsigned int count; |
| spinlock_t lock; |
| struct list_head list; |
| }; |
| |
| static LIST_HEAD(xive_irq_bitmaps); |
| |
| static int xive_irq_bitmap_add(int base, int count) |
| { |
| struct xive_irq_bitmap *xibm; |
| |
| xibm = kzalloc(sizeof(*xibm), GFP_ATOMIC); |
| if (!xibm) |
| return -ENOMEM; |
| |
| spin_lock_init(&xibm->lock); |
| xibm->base = base; |
| xibm->count = count; |
| xibm->bitmap = kzalloc(xibm->count, GFP_KERNEL); |
| list_add(&xibm->list, &xive_irq_bitmaps); |
| |
| pr_info("Using IRQ range [%x-%x]", xibm->base, |
| xibm->base + xibm->count - 1); |
| return 0; |
| } |
| |
| static int __xive_irq_bitmap_alloc(struct xive_irq_bitmap *xibm) |
| { |
| int irq; |
| |
| irq = find_first_zero_bit(xibm->bitmap, xibm->count); |
| if (irq != xibm->count) { |
| set_bit(irq, xibm->bitmap); |
| irq += xibm->base; |
| } else { |
| irq = -ENOMEM; |
| } |
| |
| return irq; |
| } |
| |
| static int xive_irq_bitmap_alloc(void) |
| { |
| struct xive_irq_bitmap *xibm; |
| unsigned long flags; |
| int irq = -ENOENT; |
| |
| list_for_each_entry(xibm, &xive_irq_bitmaps, list) { |
| spin_lock_irqsave(&xibm->lock, flags); |
| irq = __xive_irq_bitmap_alloc(xibm); |
| spin_unlock_irqrestore(&xibm->lock, flags); |
| if (irq >= 0) |
| break; |
| } |
| return irq; |
| } |
| |
| static void xive_irq_bitmap_free(int irq) |
| { |
| unsigned long flags; |
| struct xive_irq_bitmap *xibm; |
| |
| list_for_each_entry(xibm, &xive_irq_bitmaps, list) { |
| if ((irq >= xibm->base) && (irq < xibm->base + xibm->count)) { |
| spin_lock_irqsave(&xibm->lock, flags); |
| clear_bit(irq - xibm->base, xibm->bitmap); |
| spin_unlock_irqrestore(&xibm->lock, flags); |
| break; |
| } |
| } |
| } |
| |
| |
| /* Based on the similar routines in RTAS */ |
| static unsigned int plpar_busy_delay_time(long rc) |
| { |
| unsigned int ms = 0; |
| |
| if (H_IS_LONG_BUSY(rc)) { |
| ms = get_longbusy_msecs(rc); |
| } else if (rc == H_BUSY) { |
| ms = 10; /* seems appropriate for XIVE hcalls */ |
| } |
| |
| return ms; |
| } |
| |
| static unsigned int plpar_busy_delay(int rc) |
| { |
| unsigned int ms; |
| |
| ms = plpar_busy_delay_time(rc); |
| if (ms) |
| mdelay(ms); |
| |
| return ms; |
| } |
| |
| /* |
| * Note: this call has a partition wide scope and can take a while to |
| * complete. If it returns H_LONG_BUSY_* it should be retried |
| * periodically. |
| */ |
| static long plpar_int_reset(unsigned long flags) |
| { |
| long rc; |
| |
| do { |
| rc = plpar_hcall_norets(H_INT_RESET, flags); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) |
| pr_err("H_INT_RESET failed %ld\n", rc); |
| |
| return rc; |
| } |
| |
| static long plpar_int_get_source_info(unsigned long flags, |
| unsigned long lisn, |
| unsigned long *src_flags, |
| unsigned long *eoi_page, |
| unsigned long *trig_page, |
| unsigned long *esb_shift) |
| { |
| unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; |
| long rc; |
| |
| do { |
| rc = plpar_hcall(H_INT_GET_SOURCE_INFO, retbuf, flags, lisn); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_GET_SOURCE_INFO lisn=%ld failed %ld\n", lisn, rc); |
| return rc; |
| } |
| |
| *src_flags = retbuf[0]; |
| *eoi_page = retbuf[1]; |
| *trig_page = retbuf[2]; |
| *esb_shift = retbuf[3]; |
| |
| pr_devel("H_INT_GET_SOURCE_INFO flags=%lx eoi=%lx trig=%lx shift=%lx\n", |
| retbuf[0], retbuf[1], retbuf[2], retbuf[3]); |
| |
| return 0; |
| } |
| |
| #define XIVE_SRC_SET_EISN (1ull << (63 - 62)) |
| #define XIVE_SRC_MASK (1ull << (63 - 63)) /* unused */ |
| |
| static long plpar_int_set_source_config(unsigned long flags, |
| unsigned long lisn, |
| unsigned long target, |
| unsigned long prio, |
| unsigned long sw_irq) |
| { |
| long rc; |
| |
| |
| pr_devel("H_INT_SET_SOURCE_CONFIG flags=%lx lisn=%lx target=%lx prio=%lx sw_irq=%lx\n", |
| flags, lisn, target, prio, sw_irq); |
| |
| |
| do { |
| rc = plpar_hcall_norets(H_INT_SET_SOURCE_CONFIG, flags, lisn, |
| target, prio, sw_irq); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_SET_SOURCE_CONFIG lisn=%ld target=%lx prio=%lx failed %ld\n", |
| lisn, target, prio, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static long plpar_int_get_queue_info(unsigned long flags, |
| unsigned long target, |
| unsigned long priority, |
| unsigned long *esn_page, |
| unsigned long *esn_size) |
| { |
| unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; |
| long rc; |
| |
| do { |
| rc = plpar_hcall(H_INT_GET_QUEUE_INFO, retbuf, flags, target, |
| priority); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_GET_QUEUE_INFO cpu=%ld prio=%ld failed %ld\n", |
| target, priority, rc); |
| return rc; |
| } |
| |
| *esn_page = retbuf[0]; |
| *esn_size = retbuf[1]; |
| |
| pr_devel("H_INT_GET_QUEUE_INFO page=%lx size=%lx\n", |
| retbuf[0], retbuf[1]); |
| |
| return 0; |
| } |
| |
| #define XIVE_EQ_ALWAYS_NOTIFY (1ull << (63 - 63)) |
| |
| static long plpar_int_set_queue_config(unsigned long flags, |
| unsigned long target, |
| unsigned long priority, |
| unsigned long qpage, |
| unsigned long qsize) |
| { |
| long rc; |
| |
| pr_devel("H_INT_SET_QUEUE_CONFIG flags=%lx target=%lx priority=%lx qpage=%lx qsize=%lx\n", |
| flags, target, priority, qpage, qsize); |
| |
| do { |
| rc = plpar_hcall_norets(H_INT_SET_QUEUE_CONFIG, flags, target, |
| priority, qpage, qsize); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_SET_QUEUE_CONFIG cpu=%ld prio=%ld qpage=%lx returned %ld\n", |
| target, priority, qpage, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static long plpar_int_sync(unsigned long flags, unsigned long lisn) |
| { |
| long rc; |
| |
| do { |
| rc = plpar_hcall_norets(H_INT_SYNC, flags, lisn); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_SYNC lisn=%ld returned %ld\n", lisn, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| #define XIVE_ESB_FLAG_STORE (1ull << (63 - 63)) |
| |
| static long plpar_int_esb(unsigned long flags, |
| unsigned long lisn, |
| unsigned long offset, |
| unsigned long in_data, |
| unsigned long *out_data) |
| { |
| unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; |
| long rc; |
| |
| pr_devel("H_INT_ESB flags=%lx lisn=%lx offset=%lx in=%lx\n", |
| flags, lisn, offset, in_data); |
| |
| do { |
| rc = plpar_hcall(H_INT_ESB, retbuf, flags, lisn, offset, |
| in_data); |
| } while (plpar_busy_delay(rc)); |
| |
| if (rc) { |
| pr_err("H_INT_ESB lisn=%ld offset=%ld returned %ld\n", |
| lisn, offset, rc); |
| return rc; |
| } |
| |
| *out_data = retbuf[0]; |
| |
| return 0; |
| } |
| |
| static u64 xive_spapr_esb_rw(u32 lisn, u32 offset, u64 data, bool write) |
| { |
| unsigned long read_data; |
| long rc; |
| |
| rc = plpar_int_esb(write ? XIVE_ESB_FLAG_STORE : 0, |
| lisn, offset, data, &read_data); |
| if (rc) |
| return -1; |
| |
| return write ? 0 : read_data; |
| } |
| |
| #define XIVE_SRC_H_INT_ESB (1ull << (63 - 60)) |
| #define XIVE_SRC_LSI (1ull << (63 - 61)) |
| #define XIVE_SRC_TRIGGER (1ull << (63 - 62)) |
| #define XIVE_SRC_STORE_EOI (1ull << (63 - 63)) |
| |
| static int xive_spapr_populate_irq_data(u32 hw_irq, struct xive_irq_data *data) |
| { |
| long rc; |
| unsigned long flags; |
| unsigned long eoi_page; |
| unsigned long trig_page; |
| unsigned long esb_shift; |
| |
| memset(data, 0, sizeof(*data)); |
| |
| rc = plpar_int_get_source_info(0, hw_irq, &flags, &eoi_page, &trig_page, |
| &esb_shift); |
| if (rc) |
| return -EINVAL; |
| |
| if (flags & XIVE_SRC_H_INT_ESB) |
| data->flags |= XIVE_IRQ_FLAG_H_INT_ESB; |
| if (flags & XIVE_SRC_STORE_EOI) |
| data->flags |= XIVE_IRQ_FLAG_STORE_EOI; |
| if (flags & XIVE_SRC_LSI) |
| data->flags |= XIVE_IRQ_FLAG_LSI; |
| data->eoi_page = eoi_page; |
| data->esb_shift = esb_shift; |
| data->trig_page = trig_page; |
| |
| data->hw_irq = hw_irq; |
| |
| /* |
| * No chip-id for the sPAPR backend. This has an impact how we |
| * pick a target. See xive_pick_irq_target(). |
| */ |
| data->src_chip = XIVE_INVALID_CHIP_ID; |
| |
| /* |
| * When the H_INT_ESB flag is set, the H_INT_ESB hcall should |
| * be used for interrupt management. Skip the remapping of the |
| * ESB pages which are not available. |
| */ |
| if (data->flags & XIVE_IRQ_FLAG_H_INT_ESB) |
| return 0; |
| |
| data->eoi_mmio = ioremap(data->eoi_page, 1u << data->esb_shift); |
| if (!data->eoi_mmio) { |
| pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq); |
| return -ENOMEM; |
| } |
| |
| /* Full function page supports trigger */ |
| if (flags & XIVE_SRC_TRIGGER) { |
| data->trig_mmio = data->eoi_mmio; |
| return 0; |
| } |
| |
| data->trig_mmio = ioremap(data->trig_page, 1u << data->esb_shift); |
| if (!data->trig_mmio) { |
| pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static int xive_spapr_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq) |
| { |
| long rc; |
| |
| rc = plpar_int_set_source_config(XIVE_SRC_SET_EISN, hw_irq, target, |
| prio, sw_irq); |
| |
| return rc == 0 ? 0 : -ENXIO; |
| } |
| |
| /* This can be called multiple time to change a queue configuration */ |
| static int xive_spapr_configure_queue(u32 target, struct xive_q *q, u8 prio, |
| __be32 *qpage, u32 order) |
| { |
| s64 rc = 0; |
| unsigned long esn_page; |
| unsigned long esn_size; |
| u64 flags, qpage_phys; |
| |
| /* If there's an actual queue page, clean it */ |
| if (order) { |
| if (WARN_ON(!qpage)) |
| return -EINVAL; |
| qpage_phys = __pa(qpage); |
| } else { |
| qpage_phys = 0; |
| } |
| |
| /* Initialize the rest of the fields */ |
| q->msk = order ? ((1u << (order - 2)) - 1) : 0; |
| q->idx = 0; |
| q->toggle = 0; |
| |
| rc = plpar_int_get_queue_info(0, target, prio, &esn_page, &esn_size); |
| if (rc) { |
| pr_err("Error %lld getting queue info CPU %d prio %d\n", rc, |
| target, prio); |
| rc = -EIO; |
| goto fail; |
| } |
| |
| /* TODO: add support for the notification page */ |
| q->eoi_phys = esn_page; |
| |
| /* Default is to always notify */ |
| flags = XIVE_EQ_ALWAYS_NOTIFY; |
| |
| /* Configure and enable the queue in HW */ |
| rc = plpar_int_set_queue_config(flags, target, prio, qpage_phys, order); |
| if (rc) { |
| pr_err("Error %lld setting queue for CPU %d prio %d\n", rc, |
| target, prio); |
| rc = -EIO; |
| } else { |
| q->qpage = qpage; |
| } |
| fail: |
| return rc; |
| } |
| |
| static int xive_spapr_setup_queue(unsigned int cpu, struct xive_cpu *xc, |
| u8 prio) |
| { |
| struct xive_q *q = &xc->queue[prio]; |
| __be32 *qpage; |
| |
| qpage = xive_queue_page_alloc(cpu, xive_queue_shift); |
| if (IS_ERR(qpage)) |
| return PTR_ERR(qpage); |
| |
| return xive_spapr_configure_queue(get_hard_smp_processor_id(cpu), |
| q, prio, qpage, xive_queue_shift); |
| } |
| |
| static void xive_spapr_cleanup_queue(unsigned int cpu, struct xive_cpu *xc, |
| u8 prio) |
| { |
| struct xive_q *q = &xc->queue[prio]; |
| unsigned int alloc_order; |
| long rc; |
| int hw_cpu = get_hard_smp_processor_id(cpu); |
| |
| rc = plpar_int_set_queue_config(0, hw_cpu, prio, 0, 0); |
| if (rc) |
| pr_err("Error %ld setting queue for CPU %d prio %d\n", rc, |
| hw_cpu, prio); |
| |
| alloc_order = xive_alloc_order(xive_queue_shift); |
| free_pages((unsigned long)q->qpage, alloc_order); |
| q->qpage = NULL; |
| } |
| |
| static bool xive_spapr_match(struct device_node *node) |
| { |
| /* Ignore cascaded controllers for the moment */ |
| return 1; |
| } |
| |
| #ifdef CONFIG_SMP |
| static int xive_spapr_get_ipi(unsigned int cpu, struct xive_cpu *xc) |
| { |
| int irq = xive_irq_bitmap_alloc(); |
| |
| if (irq < 0) { |
| pr_err("Failed to allocate IPI on CPU %d\n", cpu); |
| return -ENXIO; |
| } |
| |
| xc->hw_ipi = irq; |
| return 0; |
| } |
| |
| static void xive_spapr_put_ipi(unsigned int cpu, struct xive_cpu *xc) |
| { |
| if (xc->hw_ipi == XIVE_BAD_IRQ) |
| return; |
| |
| xive_irq_bitmap_free(xc->hw_ipi); |
| xc->hw_ipi = XIVE_BAD_IRQ; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| static void xive_spapr_shutdown(void) |
| { |
| plpar_int_reset(0); |
| } |
| |
| /* |
| * Perform an "ack" cycle on the current thread. Grab the pending |
| * active priorities and update the CPPR to the most favored one. |
| */ |
| static void xive_spapr_update_pending(struct xive_cpu *xc) |
| { |
| u8 nsr, cppr; |
| u16 ack; |
| |
| /* |
| * Perform the "Acknowledge O/S to Register" cycle. |
| * |
| * Let's speedup the access to the TIMA using the raw I/O |
| * accessor as we don't need the synchronisation routine of |
| * the higher level ones |
| */ |
| ack = be16_to_cpu(__raw_readw(xive_tima + TM_SPC_ACK_OS_REG)); |
| |
| /* Synchronize subsequent queue accesses */ |
| mb(); |
| |
| /* |
| * Grab the CPPR and the "NSR" field which indicates the source |
| * of the interrupt (if any) |
| */ |
| cppr = ack & 0xff; |
| nsr = ack >> 8; |
| |
| if (nsr & TM_QW1_NSR_EO) { |
| if (cppr == 0xff) |
| return; |
| /* Mark the priority pending */ |
| xc->pending_prio |= 1 << cppr; |
| |
| /* |
| * A new interrupt should never have a CPPR less favored |
| * than our current one. |
| */ |
| if (cppr >= xc->cppr) |
| pr_err("CPU %d odd ack CPPR, got %d at %d\n", |
| smp_processor_id(), cppr, xc->cppr); |
| |
| /* Update our idea of what the CPPR is */ |
| xc->cppr = cppr; |
| } |
| } |
| |
| static void xive_spapr_eoi(u32 hw_irq) |
| { |
| /* Not used */; |
| } |
| |
| static void xive_spapr_setup_cpu(unsigned int cpu, struct xive_cpu *xc) |
| { |
| /* Only some debug on the TIMA settings */ |
| pr_debug("(HW value: %08x %08x %08x)\n", |
| in_be32(xive_tima + TM_QW1_OS + TM_WORD0), |
| in_be32(xive_tima + TM_QW1_OS + TM_WORD1), |
| in_be32(xive_tima + TM_QW1_OS + TM_WORD2)); |
| } |
| |
| static void xive_spapr_teardown_cpu(unsigned int cpu, struct xive_cpu *xc) |
| { |
| /* Nothing to do */; |
| } |
| |
| static void xive_spapr_sync_source(u32 hw_irq) |
| { |
| /* Specs are unclear on what this is doing */ |
| plpar_int_sync(0, hw_irq); |
| } |
| |
| static const struct xive_ops xive_spapr_ops = { |
| .populate_irq_data = xive_spapr_populate_irq_data, |
| .configure_irq = xive_spapr_configure_irq, |
| .setup_queue = xive_spapr_setup_queue, |
| .cleanup_queue = xive_spapr_cleanup_queue, |
| .match = xive_spapr_match, |
| .shutdown = xive_spapr_shutdown, |
| .update_pending = xive_spapr_update_pending, |
| .eoi = xive_spapr_eoi, |
| .setup_cpu = xive_spapr_setup_cpu, |
| .teardown_cpu = xive_spapr_teardown_cpu, |
| .sync_source = xive_spapr_sync_source, |
| .esb_rw = xive_spapr_esb_rw, |
| #ifdef CONFIG_SMP |
| .get_ipi = xive_spapr_get_ipi, |
| .put_ipi = xive_spapr_put_ipi, |
| #endif /* CONFIG_SMP */ |
| .name = "spapr", |
| }; |
| |
| /* |
| * get max priority from "/ibm,plat-res-int-priorities" |
| */ |
| static bool xive_get_max_prio(u8 *max_prio) |
| { |
| struct device_node *rootdn; |
| const __be32 *reg; |
| u32 len; |
| int prio, found; |
| |
| rootdn = of_find_node_by_path("/"); |
| if (!rootdn) { |
| pr_err("not root node found !\n"); |
| return false; |
| } |
| |
| reg = of_get_property(rootdn, "ibm,plat-res-int-priorities", &len); |
| if (!reg) { |
| pr_err("Failed to read 'ibm,plat-res-int-priorities' property\n"); |
| return false; |
| } |
| |
| if (len % (2 * sizeof(u32)) != 0) { |
| pr_err("invalid 'ibm,plat-res-int-priorities' property\n"); |
| return false; |
| } |
| |
| /* HW supports priorities in the range [0-7] and 0xFF is a |
| * wildcard priority used to mask. We scan the ranges reserved |
| * by the hypervisor to find the lowest priority we can use. |
| */ |
| found = 0xFF; |
| for (prio = 0; prio < 8; prio++) { |
| int reserved = 0; |
| int i; |
| |
| for (i = 0; i < len / (2 * sizeof(u32)); i++) { |
| int base = be32_to_cpu(reg[2 * i]); |
| int range = be32_to_cpu(reg[2 * i + 1]); |
| |
| if (prio >= base && prio < base + range) |
| reserved++; |
| } |
| |
| if (!reserved) |
| found = prio; |
| } |
| |
| if (found == 0xFF) { |
| pr_err("no valid priority found in 'ibm,plat-res-int-priorities'\n"); |
| return false; |
| } |
| |
| *max_prio = found; |
| return true; |
| } |
| |
| bool __init xive_spapr_init(void) |
| { |
| struct device_node *np; |
| struct resource r; |
| void __iomem *tima; |
| struct property *prop; |
| u8 max_prio; |
| u32 val; |
| u32 len; |
| const __be32 *reg; |
| int i; |
| |
| if (xive_cmdline_disabled) |
| return false; |
| |
| pr_devel("%s()\n", __func__); |
| np = of_find_compatible_node(NULL, NULL, "ibm,power-ivpe"); |
| if (!np) { |
| pr_devel("not found !\n"); |
| return false; |
| } |
| pr_devel("Found %s\n", np->full_name); |
| |
| /* Resource 1 is the OS ring TIMA */ |
| if (of_address_to_resource(np, 1, &r)) { |
| pr_err("Failed to get thread mgmnt area resource\n"); |
| return false; |
| } |
| tima = ioremap(r.start, resource_size(&r)); |
| if (!tima) { |
| pr_err("Failed to map thread mgmnt area\n"); |
| return false; |
| } |
| |
| if (!xive_get_max_prio(&max_prio)) |
| return false; |
| |
| /* Feed the IRQ number allocator with the ranges given in the DT */ |
| reg = of_get_property(np, "ibm,xive-lisn-ranges", &len); |
| if (!reg) { |
| pr_err("Failed to read 'ibm,xive-lisn-ranges' property\n"); |
| return false; |
| } |
| |
| if (len % (2 * sizeof(u32)) != 0) { |
| pr_err("invalid 'ibm,xive-lisn-ranges' property\n"); |
| return false; |
| } |
| |
| for (i = 0; i < len / (2 * sizeof(u32)); i++, reg += 2) |
| xive_irq_bitmap_add(be32_to_cpu(reg[0]), |
| be32_to_cpu(reg[1])); |
| |
| /* Iterate the EQ sizes and pick one */ |
| of_property_for_each_u32(np, "ibm,xive-eq-sizes", prop, reg, val) { |
| xive_queue_shift = val; |
| if (val == PAGE_SHIFT) |
| break; |
| } |
| |
| /* Initialize XIVE core with our backend */ |
| if (!xive_core_init(&xive_spapr_ops, tima, TM_QW1_OS, max_prio)) |
| return false; |
| |
| pr_info("Using %dkB queues\n", 1 << (xive_queue_shift - 10)); |
| return true; |
| } |