| /* | |
| * | |
| * Driver for the 3Com Bluetooth PCMCIA card | |
| * | |
| * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> | |
| * Jose Orlando Pereira <jop@di.uminho.pt> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation; | |
| * | |
| * Software distributed under the License is distributed on an "AS | |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
| * implied. See the License for the specific language governing | |
| * rights and limitations under the License. | |
| * | |
| * The initial developer of the original code is David A. Hinds | |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/ioport.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/string.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_reg.h> | |
| #include <linux/bitops.h> | |
| #include <asm/io.h> | |
| #include <linux/device.h> | |
| #include <linux/firmware.h> | |
| #include <pcmcia/cistpl.h> | |
| #include <pcmcia/ciscode.h> | |
| #include <pcmcia/ds.h> | |
| #include <pcmcia/cisreg.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| /* ======================== Module parameters ======================== */ | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | |
| MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_FIRMWARE("BT3CPCC.bin"); | |
| /* ======================== Local structures ======================== */ | |
| typedef struct bt3c_info_t { | |
| struct pcmcia_device *p_dev; | |
| struct hci_dev *hdev; | |
| spinlock_t lock; /* For serializing operations */ | |
| struct sk_buff_head txq; | |
| unsigned long tx_state; | |
| unsigned long rx_state; | |
| unsigned long rx_count; | |
| struct sk_buff *rx_skb; | |
| } bt3c_info_t; | |
| static int bt3c_config(struct pcmcia_device *link); | |
| static void bt3c_release(struct pcmcia_device *link); | |
| static void bt3c_detach(struct pcmcia_device *p_dev); | |
| /* Transmit states */ | |
| #define XMIT_SENDING 1 | |
| #define XMIT_WAKEUP 2 | |
| #define XMIT_WAITING 8 | |
| /* Receiver states */ | |
| #define RECV_WAIT_PACKET_TYPE 0 | |
| #define RECV_WAIT_EVENT_HEADER 1 | |
| #define RECV_WAIT_ACL_HEADER 2 | |
| #define RECV_WAIT_SCO_HEADER 3 | |
| #define RECV_WAIT_DATA 4 | |
| /* ======================== Special I/O functions ======================== */ | |
| #define DATA_L 0 | |
| #define DATA_H 1 | |
| #define ADDR_L 2 | |
| #define ADDR_H 3 | |
| #define CONTROL 4 | |
| static inline void bt3c_address(unsigned int iobase, unsigned short addr) | |
| { | |
| outb(addr & 0xff, iobase + ADDR_L); | |
| outb((addr >> 8) & 0xff, iobase + ADDR_H); | |
| } | |
| static inline void bt3c_put(unsigned int iobase, unsigned short value) | |
| { | |
| outb(value & 0xff, iobase + DATA_L); | |
| outb((value >> 8) & 0xff, iobase + DATA_H); | |
| } | |
| static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value) | |
| { | |
| bt3c_address(iobase, addr); | |
| bt3c_put(iobase, value); | |
| } | |
| static inline unsigned short bt3c_get(unsigned int iobase) | |
| { | |
| unsigned short value = inb(iobase + DATA_L); | |
| value |= inb(iobase + DATA_H) << 8; | |
| return value; | |
| } | |
| static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr) | |
| { | |
| bt3c_address(iobase, addr); | |
| return bt3c_get(iobase); | |
| } | |
| /* ======================== Interrupt handling ======================== */ | |
| static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | |
| { | |
| int actual = 0; | |
| bt3c_address(iobase, 0x7080); | |
| /* Fill FIFO with current frame */ | |
| while (actual < len) { | |
| /* Transmit next byte */ | |
| bt3c_put(iobase, buf[actual]); | |
| actual++; | |
| } | |
| bt3c_io_write(iobase, 0x7005, actual); | |
| return actual; | |
| } | |
| static void bt3c_write_wakeup(bt3c_info_t *info) | |
| { | |
| if (!info) { | |
| BT_ERR("Unknown device"); | |
| return; | |
| } | |
| if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) | |
| return; | |
| do { | |
| unsigned int iobase = info->p_dev->resource[0]->start; | |
| register struct sk_buff *skb; | |
| int len; | |
| if (!pcmcia_dev_present(info->p_dev)) | |
| break; | |
| if (!(skb = skb_dequeue(&(info->txq)))) { | |
| clear_bit(XMIT_SENDING, &(info->tx_state)); | |
| break; | |
| } | |
| /* Send frame */ | |
| len = bt3c_write(iobase, 256, skb->data, skb->len); | |
| if (len != skb->len) { | |
| BT_ERR("Very strange"); | |
| } | |
| kfree_skb(skb); | |
| info->hdev->stat.byte_tx += len; | |
| } while (0); | |
| } | |
| static void bt3c_receive(bt3c_info_t *info) | |
| { | |
| unsigned int iobase; | |
| int size = 0, avail; | |
| if (!info) { | |
| BT_ERR("Unknown device"); | |
| return; | |
| } | |
| iobase = info->p_dev->resource[0]->start; | |
| avail = bt3c_read(iobase, 0x7006); | |
| //printk("bt3c_cs: receiving %d bytes\n", avail); | |
| bt3c_address(iobase, 0x7480); | |
| while (size < avail) { | |
| size++; | |
| info->hdev->stat.byte_rx++; | |
| /* Allocate packet */ | |
| if (info->rx_skb == NULL) { | |
| info->rx_state = RECV_WAIT_PACKET_TYPE; | |
| info->rx_count = 0; | |
| if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | |
| BT_ERR("Can't allocate mem for new packet"); | |
| return; | |
| } | |
| } | |
| if (info->rx_state == RECV_WAIT_PACKET_TYPE) { | |
| info->rx_skb->dev = (void *) info->hdev; | |
| bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L); | |
| inb(iobase + DATA_H); | |
| //printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type); | |
| switch (bt_cb(info->rx_skb)->pkt_type) { | |
| case HCI_EVENT_PKT: | |
| info->rx_state = RECV_WAIT_EVENT_HEADER; | |
| info->rx_count = HCI_EVENT_HDR_SIZE; | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| info->rx_state = RECV_WAIT_ACL_HEADER; | |
| info->rx_count = HCI_ACL_HDR_SIZE; | |
| break; | |
| case HCI_SCODATA_PKT: | |
| info->rx_state = RECV_WAIT_SCO_HEADER; | |
| info->rx_count = HCI_SCO_HDR_SIZE; | |
| break; | |
| default: | |
| /* Unknown packet */ | |
| BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type); | |
| info->hdev->stat.err_rx++; | |
| clear_bit(HCI_RUNNING, &(info->hdev->flags)); | |
| kfree_skb(info->rx_skb); | |
| info->rx_skb = NULL; | |
| break; | |
| } | |
| } else { | |
| __u8 x = inb(iobase + DATA_L); | |
| *skb_put(info->rx_skb, 1) = x; | |
| inb(iobase + DATA_H); | |
| info->rx_count--; | |
| if (info->rx_count == 0) { | |
| int dlen; | |
| struct hci_event_hdr *eh; | |
| struct hci_acl_hdr *ah; | |
| struct hci_sco_hdr *sh; | |
| switch (info->rx_state) { | |
| case RECV_WAIT_EVENT_HEADER: | |
| eh = hci_event_hdr(info->rx_skb); | |
| info->rx_state = RECV_WAIT_DATA; | |
| info->rx_count = eh->plen; | |
| break; | |
| case RECV_WAIT_ACL_HEADER: | |
| ah = hci_acl_hdr(info->rx_skb); | |
| dlen = __le16_to_cpu(ah->dlen); | |
| info->rx_state = RECV_WAIT_DATA; | |
| info->rx_count = dlen; | |
| break; | |
| case RECV_WAIT_SCO_HEADER: | |
| sh = hci_sco_hdr(info->rx_skb); | |
| info->rx_state = RECV_WAIT_DATA; | |
| info->rx_count = sh->dlen; | |
| break; | |
| case RECV_WAIT_DATA: | |
| hci_recv_frame(info->rx_skb); | |
| info->rx_skb = NULL; | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| bt3c_io_write(iobase, 0x7006, 0x0000); | |
| } | |
| static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) | |
| { | |
| bt3c_info_t *info = dev_inst; | |
| unsigned int iobase; | |
| int iir; | |
| irqreturn_t r = IRQ_NONE; | |
| if (!info || !info->hdev) | |
| /* our irq handler is shared */ | |
| return IRQ_NONE; | |
| iobase = info->p_dev->resource[0]->start; | |
| spin_lock(&(info->lock)); | |
| iir = inb(iobase + CONTROL); | |
| if (iir & 0x80) { | |
| int stat = bt3c_read(iobase, 0x7001); | |
| if ((stat & 0xff) == 0x7f) { | |
| BT_ERR("Very strange (stat=0x%04x)", stat); | |
| } else if ((stat & 0xff) != 0xff) { | |
| if (stat & 0x0020) { | |
| int status = bt3c_read(iobase, 0x7002) & 0x10; | |
| BT_INFO("%s: Antenna %s", info->hdev->name, | |
| status ? "out" : "in"); | |
| } | |
| if (stat & 0x0001) | |
| bt3c_receive(info); | |
| if (stat & 0x0002) { | |
| //BT_ERR("Ack (stat=0x%04x)", stat); | |
| clear_bit(XMIT_SENDING, &(info->tx_state)); | |
| bt3c_write_wakeup(info); | |
| } | |
| bt3c_io_write(iobase, 0x7001, 0x0000); | |
| outb(iir, iobase + CONTROL); | |
| } | |
| r = IRQ_HANDLED; | |
| } | |
| spin_unlock(&(info->lock)); | |
| return r; | |
| } | |
| /* ======================== HCI interface ======================== */ | |
| static int bt3c_hci_flush(struct hci_dev *hdev) | |
| { | |
| bt3c_info_t *info = hci_get_drvdata(hdev); | |
| /* Drop TX queue */ | |
| skb_queue_purge(&(info->txq)); | |
| return 0; | |
| } | |
| static int bt3c_hci_open(struct hci_dev *hdev) | |
| { | |
| set_bit(HCI_RUNNING, &(hdev->flags)); | |
| return 0; | |
| } | |
| static int bt3c_hci_close(struct hci_dev *hdev) | |
| { | |
| if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) | |
| return 0; | |
| bt3c_hci_flush(hdev); | |
| return 0; | |
| } | |
| static int bt3c_hci_send_frame(struct sk_buff *skb) | |
| { | |
| bt3c_info_t *info; | |
| struct hci_dev *hdev = (struct hci_dev *)(skb->dev); | |
| unsigned long flags; | |
| if (!hdev) { | |
| BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | |
| return -ENODEV; | |
| } | |
| info = hci_get_drvdata(hdev); | |
| switch (bt_cb(skb)->pkt_type) { | |
| case HCI_COMMAND_PKT: | |
| hdev->stat.cmd_tx++; | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| hdev->stat.acl_tx++; | |
| break; | |
| case HCI_SCODATA_PKT: | |
| hdev->stat.sco_tx++; | |
| break; | |
| }; | |
| /* Prepend skb with frame type */ | |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | |
| skb_queue_tail(&(info->txq), skb); | |
| spin_lock_irqsave(&(info->lock), flags); | |
| bt3c_write_wakeup(info); | |
| spin_unlock_irqrestore(&(info->lock), flags); | |
| return 0; | |
| } | |
| static int bt3c_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | |
| { | |
| return -ENOIOCTLCMD; | |
| } | |
| /* ======================== Card services HCI interaction ======================== */ | |
| static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware, | |
| int count) | |
| { | |
| char *ptr = (char *) firmware; | |
| char b[9]; | |
| unsigned int iobase, size, addr, fcs, tmp; | |
| int i, err = 0; | |
| iobase = info->p_dev->resource[0]->start; | |
| /* Reset */ | |
| bt3c_io_write(iobase, 0x8040, 0x0404); | |
| bt3c_io_write(iobase, 0x8040, 0x0400); | |
| udelay(1); | |
| bt3c_io_write(iobase, 0x8040, 0x0404); | |
| udelay(17); | |
| /* Load */ | |
| while (count) { | |
| if (ptr[0] != 'S') { | |
| BT_ERR("Bad address in firmware"); | |
| err = -EFAULT; | |
| goto error; | |
| } | |
| memset(b, 0, sizeof(b)); | |
| memcpy(b, ptr + 2, 2); | |
| size = simple_strtoul(b, NULL, 16); | |
| memset(b, 0, sizeof(b)); | |
| memcpy(b, ptr + 4, 8); | |
| addr = simple_strtoul(b, NULL, 16); | |
| memset(b, 0, sizeof(b)); | |
| memcpy(b, ptr + (size * 2) + 2, 2); | |
| fcs = simple_strtoul(b, NULL, 16); | |
| memset(b, 0, sizeof(b)); | |
| for (tmp = 0, i = 0; i < size; i++) { | |
| memcpy(b, ptr + (i * 2) + 2, 2); | |
| tmp += simple_strtol(b, NULL, 16); | |
| } | |
| if (((tmp + fcs) & 0xff) != 0xff) { | |
| BT_ERR("Checksum error in firmware"); | |
| err = -EILSEQ; | |
| goto error; | |
| } | |
| if (ptr[1] == '3') { | |
| bt3c_address(iobase, addr); | |
| memset(b, 0, sizeof(b)); | |
| for (i = 0; i < (size - 4) / 2; i++) { | |
| memcpy(b, ptr + (i * 4) + 12, 4); | |
| tmp = simple_strtoul(b, NULL, 16); | |
| bt3c_put(iobase, tmp); | |
| } | |
| } | |
| ptr += (size * 2) + 6; | |
| count -= (size * 2) + 6; | |
| } | |
| udelay(17); | |
| /* Boot */ | |
| bt3c_address(iobase, 0x3000); | |
| outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL); | |
| error: | |
| udelay(17); | |
| /* Clear */ | |
| bt3c_io_write(iobase, 0x7006, 0x0000); | |
| bt3c_io_write(iobase, 0x7005, 0x0000); | |
| bt3c_io_write(iobase, 0x7001, 0x0000); | |
| return err; | |
| } | |
| static int bt3c_open(bt3c_info_t *info) | |
| { | |
| const struct firmware *firmware; | |
| struct hci_dev *hdev; | |
| int err; | |
| spin_lock_init(&(info->lock)); | |
| skb_queue_head_init(&(info->txq)); | |
| info->rx_state = RECV_WAIT_PACKET_TYPE; | |
| info->rx_count = 0; | |
| info->rx_skb = NULL; | |
| /* Initialize HCI device */ | |
| hdev = hci_alloc_dev(); | |
| if (!hdev) { | |
| BT_ERR("Can't allocate HCI device"); | |
| return -ENOMEM; | |
| } | |
| info->hdev = hdev; | |
| hdev->bus = HCI_PCCARD; | |
| hci_set_drvdata(hdev, info); | |
| SET_HCIDEV_DEV(hdev, &info->p_dev->dev); | |
| hdev->open = bt3c_hci_open; | |
| hdev->close = bt3c_hci_close; | |
| hdev->flush = bt3c_hci_flush; | |
| hdev->send = bt3c_hci_send_frame; | |
| hdev->ioctl = bt3c_hci_ioctl; | |
| /* Load firmware */ | |
| err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev); | |
| if (err < 0) { | |
| BT_ERR("Firmware request failed"); | |
| goto error; | |
| } | |
| err = bt3c_load_firmware(info, firmware->data, firmware->size); | |
| release_firmware(firmware); | |
| if (err < 0) { | |
| BT_ERR("Firmware loading failed"); | |
| goto error; | |
| } | |
| /* Timeout before it is safe to send the first HCI packet */ | |
| msleep(1000); | |
| /* Register HCI device */ | |
| err = hci_register_dev(hdev); | |
| if (err < 0) { | |
| BT_ERR("Can't register HCI device"); | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| info->hdev = NULL; | |
| hci_free_dev(hdev); | |
| return err; | |
| } | |
| static int bt3c_close(bt3c_info_t *info) | |
| { | |
| struct hci_dev *hdev = info->hdev; | |
| if (!hdev) | |
| return -ENODEV; | |
| bt3c_hci_close(hdev); | |
| hci_unregister_dev(hdev); | |
| hci_free_dev(hdev); | |
| return 0; | |
| } | |
| static int bt3c_probe(struct pcmcia_device *link) | |
| { | |
| bt3c_info_t *info; | |
| /* Create new info device */ | |
| info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->p_dev = link; | |
| link->priv = info; | |
| link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | | |
| CONF_AUTO_SET_IO; | |
| return bt3c_config(link); | |
| } | |
| static void bt3c_detach(struct pcmcia_device *link) | |
| { | |
| bt3c_release(link); | |
| } | |
| static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) | |
| { | |
| int *try = priv_data; | |
| if (!try) | |
| p_dev->io_lines = 16; | |
| if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) | |
| return -EINVAL; | |
| p_dev->resource[0]->end = 8; | |
| p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
| p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | |
| return pcmcia_request_io(p_dev); | |
| } | |
| static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, | |
| void *priv_data) | |
| { | |
| static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | |
| int j; | |
| if (p_dev->io_lines > 3) | |
| return -ENODEV; | |
| p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
| p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | |
| p_dev->resource[0]->end = 8; | |
| for (j = 0; j < 5; j++) { | |
| p_dev->resource[0]->start = base[j]; | |
| p_dev->io_lines = base[j] ? 16 : 3; | |
| if (!pcmcia_request_io(p_dev)) | |
| return 0; | |
| } | |
| return -ENODEV; | |
| } | |
| static int bt3c_config(struct pcmcia_device *link) | |
| { | |
| bt3c_info_t *info = link->priv; | |
| int i; | |
| unsigned long try; | |
| /* First pass: look for a config entry that looks normal. | |
| Two tries: without IO aliases, then with aliases */ | |
| for (try = 0; try < 2; try++) | |
| if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try)) | |
| goto found_port; | |
| /* Second pass: try to find an entry that isn't picky about | |
| its base address, then try to grab any standard serial port | |
| address, and finally try to get any free port. */ | |
| if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL)) | |
| goto found_port; | |
| BT_ERR("No usable port range found"); | |
| goto failed; | |
| found_port: | |
| i = pcmcia_request_irq(link, &bt3c_interrupt); | |
| if (i != 0) | |
| goto failed; | |
| i = pcmcia_enable_device(link); | |
| if (i != 0) | |
| goto failed; | |
| if (bt3c_open(info) != 0) | |
| goto failed; | |
| return 0; | |
| failed: | |
| bt3c_release(link); | |
| return -ENODEV; | |
| } | |
| static void bt3c_release(struct pcmcia_device *link) | |
| { | |
| bt3c_info_t *info = link->priv; | |
| bt3c_close(info); | |
| pcmcia_disable_device(link); | |
| } | |
| static const struct pcmcia_device_id bt3c_ids[] = { | |
| PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02), | |
| PCMCIA_DEVICE_NULL | |
| }; | |
| MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); | |
| static struct pcmcia_driver bt3c_driver = { | |
| .owner = THIS_MODULE, | |
| .name = "bt3c_cs", | |
| .probe = bt3c_probe, | |
| .remove = bt3c_detach, | |
| .id_table = bt3c_ids, | |
| }; | |
| module_pcmcia_driver(bt3c_driver); |