| /* |
| * PCI bus driver for Bosch C_CAN/D_CAN controller |
| * |
| * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com> |
| * |
| * Borrowed from c_can_platform.c |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| |
| #include <linux/can/dev.h> |
| |
| #include "c_can.h" |
| |
| #define PCI_DEVICE_ID_PCH_CAN 0x8818 |
| #define PCH_PCI_SOFT_RESET 0x01fc |
| |
| enum c_can_pci_reg_align { |
| C_CAN_REG_ALIGN_16, |
| C_CAN_REG_ALIGN_32, |
| C_CAN_REG_32, |
| }; |
| |
| struct c_can_pci_data { |
| /* Specify if is C_CAN or D_CAN */ |
| enum c_can_dev_id type; |
| /* Set the register alignment in the memory */ |
| enum c_can_pci_reg_align reg_align; |
| /* Set the frequency */ |
| unsigned int freq; |
| /* PCI bar number */ |
| int bar; |
| /* Callback for reset */ |
| void (*init)(const struct c_can_priv *priv, bool enable); |
| }; |
| |
| /* |
| * 16-bit c_can registers can be arranged differently in the memory |
| * architecture of different implementations. For example: 16-bit |
| * registers can be aligned to a 16-bit boundary or 32-bit boundary etc. |
| * Handle the same by providing a common read/write interface. |
| */ |
| static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv, |
| enum reg index) |
| { |
| return readw(priv->base + priv->regs[index]); |
| } |
| |
| static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv, |
| enum reg index, u16 val) |
| { |
| writew(val, priv->base + priv->regs[index]); |
| } |
| |
| static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv, |
| enum reg index) |
| { |
| return readw(priv->base + 2 * priv->regs[index]); |
| } |
| |
| static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv, |
| enum reg index, u16 val) |
| { |
| writew(val, priv->base + 2 * priv->regs[index]); |
| } |
| |
| static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv, |
| enum reg index) |
| { |
| return (u16)ioread32(priv->base + 2 * priv->regs[index]); |
| } |
| |
| static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv, |
| enum reg index, u16 val) |
| { |
| iowrite32((u32)val, priv->base + 2 * priv->regs[index]); |
| } |
| |
| static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index) |
| { |
| u32 val; |
| |
| val = priv->read_reg(priv, index); |
| val |= ((u32) priv->read_reg(priv, index + 1)) << 16; |
| |
| return val; |
| } |
| |
| static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index, |
| u32 val) |
| { |
| priv->write_reg(priv, index + 1, val >> 16); |
| priv->write_reg(priv, index, val); |
| } |
| |
| static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable) |
| { |
| if (enable) { |
| u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET; |
| |
| /* write to sw reset register */ |
| iowrite32(1, addr); |
| iowrite32(0, addr); |
| } |
| } |
| |
| static int c_can_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data; |
| struct c_can_priv *priv; |
| struct net_device *dev; |
| void __iomem *addr; |
| int ret; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "pci_enable_device FAILED\n"); |
| goto out; |
| } |
| |
| ret = pci_request_regions(pdev, KBUILD_MODNAME); |
| if (ret) { |
| dev_err(&pdev->dev, "pci_request_regions FAILED\n"); |
| goto out_disable_device; |
| } |
| |
| ret = pci_enable_msi(pdev); |
| if (!ret) { |
| dev_info(&pdev->dev, "MSI enabled\n"); |
| pci_set_master(pdev); |
| } |
| |
| addr = pci_iomap(pdev, c_can_pci_data->bar, |
| pci_resource_len(pdev, c_can_pci_data->bar)); |
| if (!addr) { |
| dev_err(&pdev->dev, |
| "device has no PCI memory resources, " |
| "failing adapter\n"); |
| ret = -ENOMEM; |
| goto out_release_regions; |
| } |
| |
| /* allocate the c_can device */ |
| dev = alloc_c_can_dev(); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto out_iounmap; |
| } |
| |
| priv = netdev_priv(dev); |
| pci_set_drvdata(pdev, dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| dev->irq = pdev->irq; |
| priv->base = addr; |
| priv->device = &pdev->dev; |
| |
| if (!c_can_pci_data->freq) { |
| dev_err(&pdev->dev, "no clock frequency defined\n"); |
| ret = -ENODEV; |
| goto out_free_c_can; |
| } else { |
| priv->can.clock.freq = c_can_pci_data->freq; |
| } |
| |
| /* Configure CAN type */ |
| switch (c_can_pci_data->type) { |
| case BOSCH_C_CAN: |
| priv->regs = reg_map_c_can; |
| break; |
| case BOSCH_D_CAN: |
| priv->regs = reg_map_d_can; |
| break; |
| default: |
| ret = -EINVAL; |
| goto out_free_c_can; |
| } |
| |
| priv->type = c_can_pci_data->type; |
| |
| /* Configure access to registers */ |
| switch (c_can_pci_data->reg_align) { |
| case C_CAN_REG_ALIGN_32: |
| priv->read_reg = c_can_pci_read_reg_aligned_to_32bit; |
| priv->write_reg = c_can_pci_write_reg_aligned_to_32bit; |
| break; |
| case C_CAN_REG_ALIGN_16: |
| priv->read_reg = c_can_pci_read_reg_aligned_to_16bit; |
| priv->write_reg = c_can_pci_write_reg_aligned_to_16bit; |
| break; |
| case C_CAN_REG_32: |
| priv->read_reg = c_can_pci_read_reg_32bit; |
| priv->write_reg = c_can_pci_write_reg_32bit; |
| break; |
| default: |
| ret = -EINVAL; |
| goto out_free_c_can; |
| } |
| priv->read_reg32 = c_can_pci_read_reg32; |
| priv->write_reg32 = c_can_pci_write_reg32; |
| |
| priv->raminit = c_can_pci_data->init; |
| |
| ret = register_c_can_dev(dev); |
| if (ret) { |
| dev_err(&pdev->dev, "registering %s failed (err=%d)\n", |
| KBUILD_MODNAME, ret); |
| goto out_free_c_can; |
| } |
| |
| dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n", |
| KBUILD_MODNAME, priv->regs, dev->irq); |
| |
| return 0; |
| |
| out_free_c_can: |
| free_c_can_dev(dev); |
| out_iounmap: |
| pci_iounmap(pdev, addr); |
| out_release_regions: |
| pci_disable_msi(pdev); |
| pci_clear_master(pdev); |
| pci_release_regions(pdev); |
| out_disable_device: |
| pci_disable_device(pdev); |
| out: |
| return ret; |
| } |
| |
| static void c_can_pci_remove(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct c_can_priv *priv = netdev_priv(dev); |
| |
| unregister_c_can_dev(dev); |
| |
| free_c_can_dev(dev); |
| |
| pci_iounmap(pdev, priv->base); |
| pci_disable_msi(pdev); |
| pci_clear_master(pdev); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static const struct c_can_pci_data c_can_sta2x11= { |
| .type = BOSCH_C_CAN, |
| .reg_align = C_CAN_REG_ALIGN_32, |
| .freq = 52000000, /* 52 Mhz */ |
| .bar = 0, |
| }; |
| |
| static const struct c_can_pci_data c_can_pch = { |
| .type = BOSCH_C_CAN, |
| .reg_align = C_CAN_REG_32, |
| .freq = 50000000, /* 50 MHz */ |
| .init = c_can_pci_reset_pch, |
| .bar = 1, |
| }; |
| |
| #define C_CAN_ID(_vend, _dev, _driverdata) { \ |
| PCI_DEVICE(_vend, _dev), \ |
| .driver_data = (unsigned long)&_driverdata, \ |
| } |
| |
| static const struct pci_device_id c_can_pci_tbl[] = { |
| C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN, |
| c_can_sta2x11), |
| C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN, |
| c_can_pch), |
| {}, |
| }; |
| static struct pci_driver c_can_pci_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = c_can_pci_tbl, |
| .probe = c_can_pci_probe, |
| .remove = c_can_pci_remove, |
| }; |
| |
| module_pci_driver(c_can_pci_driver); |
| |
| MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller"); |
| MODULE_DEVICE_TABLE(pci, c_can_pci_tbl); |