| /* | |
| * Copyright 2012-2015 Maxime Ripard | |
| * | |
| * Maxime Ripard <maxime.ripard@free-electrons.com> | |
| * | |
| * This file is dual-licensed: you can use it either under the terms | |
| * of the GPL or the X11 license, at your option. Note that this dual | |
| * licensing only applies to this file, and not this project as a | |
| * whole. | |
| * | |
| * a) This library is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This library is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * Or, alternatively, | |
| * | |
| * b) Permission is hereby granted, free of charge, to any person | |
| * obtaining a copy of this software and associated documentation | |
| * files (the "Software"), to deal in the Software without | |
| * restriction, including without limitation the rights to use, | |
| * copy, modify, merge, publish, distribute, sublicense, and/or | |
| * sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following | |
| * conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be | |
| * included in all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| */ | |
| #include "skeleton.dtsi" | |
| #include <dt-bindings/clock/sun5i-ccu.h> | |
| #include <dt-bindings/dma/sun4i-a10.h> | |
| #include <dt-bindings/reset/sun5i-ccu.h> | |
| / { | |
| interrupt-parent = <&intc>; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu0: cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a8"; | |
| reg = <0x0>; | |
| clocks = <&ccu CLK_CPU>; | |
| }; | |
| }; | |
| chosen { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| framebuffer@0 { | |
| compatible = "allwinner,simple-framebuffer", | |
| "simple-framebuffer"; | |
| allwinner,pipeline = "de_be0-lcd0"; | |
| clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, | |
| <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; | |
| status = "disabled"; | |
| }; | |
| framebuffer@1 { | |
| compatible = "allwinner,simple-framebuffer", | |
| "simple-framebuffer"; | |
| allwinner,pipeline = "de_be0-lcd0-tve0"; | |
| clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, | |
| <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, | |
| <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; | |
| status = "disabled"; | |
| }; | |
| }; | |
| clocks { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| osc24M: clk@1c20050 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <24000000>; | |
| clock-output-names = "osc24M"; | |
| }; | |
| osc32k: clk@0 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <32768>; | |
| clock-output-names = "osc32k"; | |
| }; | |
| }; | |
| soc@1c00000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| sram-controller@1c00000 { | |
| compatible = "allwinner,sun4i-a10-sram-controller"; | |
| reg = <0x01c00000 0x30>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| sram_a: sram@0 { | |
| compatible = "mmio-sram"; | |
| reg = <0x00000000 0xc000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0x00000000 0xc000>; | |
| }; | |
| emac_sram: sram-section@8000 { | |
| compatible = "allwinner,sun4i-a10-sram-a3-a4"; | |
| reg = <0x8000 0x4000>; | |
| status = "disabled"; | |
| }; | |
| sram_d: sram@10000 { | |
| compatible = "mmio-sram"; | |
| reg = <0x00010000 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0x00010000 0x1000>; | |
| otg_sram: sram-section@0 { | |
| compatible = "allwinner,sun4i-a10-sram-d"; | |
| reg = <0x0000 0x1000>; | |
| status = "disabled"; | |
| }; | |
| }; | |
| }; | |
| dma: dma-controller@1c02000 { | |
| compatible = "allwinner,sun4i-a10-dma"; | |
| reg = <0x01c02000 0x1000>; | |
| interrupts = <27>; | |
| clocks = <&ccu CLK_AHB_DMA>; | |
| #dma-cells = <2>; | |
| }; | |
| nfc: nand@1c03000 { | |
| compatible = "allwinner,sun4i-a10-nand"; | |
| reg = <0x01c03000 0x1000>; | |
| interrupts = <37>; | |
| clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <&dma SUN4I_DMA_DEDICATED 3>; | |
| dma-names = "rxtx"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| spi0: spi@1c05000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c05000 0x1000>; | |
| interrupts = <10>; | |
| clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <&dma SUN4I_DMA_DEDICATED 27>, | |
| <&dma SUN4I_DMA_DEDICATED 26>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| spi1: spi@1c06000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c06000 0x1000>; | |
| interrupts = <11>; | |
| clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <&dma SUN4I_DMA_DEDICATED 9>, | |
| <&dma SUN4I_DMA_DEDICATED 8>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| tve0: tv-encoder@1c0a000 { | |
| compatible = "allwinner,sun4i-a10-tv-encoder"; | |
| reg = <0x01c0a000 0x1000>; | |
| clocks = <&ccu CLK_AHB_TVE>; | |
| resets = <&ccu RST_TVE>; | |
| status = "disabled"; | |
| port { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| tve0_in_tcon0: endpoint@0 { | |
| reg = <0>; | |
| remote-endpoint = <&tcon0_out_tve0>; | |
| }; | |
| }; | |
| }; | |
| emac: ethernet@1c0b000 { | |
| compatible = "allwinner,sun4i-a10-emac"; | |
| reg = <0x01c0b000 0x1000>; | |
| interrupts = <55>; | |
| clocks = <&ccu CLK_AHB_EMAC>; | |
| allwinner,sram = <&emac_sram 1>; | |
| status = "disabled"; | |
| }; | |
| mdio: mdio@1c0b080 { | |
| compatible = "allwinner,sun4i-a10-mdio"; | |
| reg = <0x01c0b080 0x14>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| tcon0: lcd-controller@1c0c000 { | |
| compatible = "allwinner,sun5i-a13-tcon"; | |
| reg = <0x01c0c000 0x1000>; | |
| interrupts = <44>; | |
| resets = <&ccu RST_LCD>; | |
| reset-names = "lcd"; | |
| clocks = <&ccu CLK_AHB_LCD>, | |
| <&ccu CLK_TCON_CH0>, | |
| <&ccu CLK_TCON_CH1>; | |
| clock-names = "ahb", | |
| "tcon-ch0", | |
| "tcon-ch1"; | |
| clock-output-names = "tcon-pixel-clock"; | |
| status = "disabled"; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| tcon0_in: port@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0>; | |
| tcon0_in_be0: endpoint@0 { | |
| reg = <0>; | |
| remote-endpoint = <&be0_out_tcon0>; | |
| }; | |
| }; | |
| tcon0_out: port@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <1>; | |
| tcon0_out_tve0: endpoint@1 { | |
| reg = <1>; | |
| remote-endpoint = <&tve0_in_tcon0>; | |
| allwinner,tcon-channel = <1>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| mmc0: mmc@1c0f000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c0f000 0x1000>; | |
| clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <32>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| mmc1: mmc@1c10000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c10000 0x1000>; | |
| clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <33>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| mmc2: mmc@1c11000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c11000 0x1000>; | |
| clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <34>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| usb_otg: usb@1c13000 { | |
| compatible = "allwinner,sun4i-a10-musb"; | |
| reg = <0x01c13000 0x0400>; | |
| clocks = <&ccu CLK_AHB_OTG>; | |
| interrupts = <38>; | |
| interrupt-names = "mc"; | |
| phys = <&usbphy 0>; | |
| phy-names = "usb"; | |
| extcon = <&usbphy 0>; | |
| allwinner,sram = <&otg_sram 1>; | |
| status = "disabled"; | |
| }; | |
| usbphy: phy@1c13400 { | |
| #phy-cells = <1>; | |
| compatible = "allwinner,sun5i-a13-usb-phy"; | |
| reg = <0x01c13400 0x10 0x01c14800 0x4>; | |
| reg-names = "phy_ctrl", "pmu1"; | |
| clocks = <&ccu CLK_USB_PHY0>; | |
| clock-names = "usb_phy"; | |
| resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; | |
| reset-names = "usb0_reset", "usb1_reset"; | |
| status = "disabled"; | |
| }; | |
| ehci0: usb@1c14000 { | |
| compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; | |
| reg = <0x01c14000 0x100>; | |
| interrupts = <39>; | |
| clocks = <&ccu CLK_AHB_EHCI>; | |
| phys = <&usbphy 1>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| ohci0: usb@1c14400 { | |
| compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; | |
| reg = <0x01c14400 0x100>; | |
| interrupts = <40>; | |
| clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; | |
| phys = <&usbphy 1>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| crypto: crypto-engine@1c15000 { | |
| compatible = "allwinner,sun5i-a13-crypto", | |
| "allwinner,sun4i-a10-crypto"; | |
| reg = <0x01c15000 0x1000>; | |
| interrupts = <54>; | |
| clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; | |
| clock-names = "ahb", "mod"; | |
| }; | |
| spi2: spi@1c17000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c17000 0x1000>; | |
| interrupts = <12>; | |
| clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <&dma SUN4I_DMA_DEDICATED 29>, | |
| <&dma SUN4I_DMA_DEDICATED 28>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| ccu: clock@1c20000 { | |
| reg = <0x01c20000 0x400>; | |
| clocks = <&osc24M>, <&osc32k>; | |
| clock-names = "hosc", "losc"; | |
| #clock-cells = <1>; | |
| #reset-cells = <1>; | |
| }; | |
| intc: interrupt-controller@1c20400 { | |
| compatible = "allwinner,sun4i-a10-ic"; | |
| reg = <0x01c20400 0x400>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| }; | |
| pio: pinctrl@1c20800 { | |
| reg = <0x01c20800 0x400>; | |
| interrupts = <28>; | |
| clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; | |
| clock-names = "apb", "hosc", "losc"; | |
| gpio-controller; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| #gpio-cells = <3>; | |
| emac_pins_a: emac0@0 { | |
| pins = "PD6", "PD7", "PD10", | |
| "PD11", "PD12", "PD13", "PD14", | |
| "PD15", "PD18", "PD19", "PD20", | |
| "PD21", "PD22", "PD23", "PD24", | |
| "PD25", "PD26", "PD27"; | |
| function = "emac"; | |
| }; | |
| i2c0_pins_a: i2c0@0 { | |
| pins = "PB0", "PB1"; | |
| function = "i2c0"; | |
| }; | |
| i2c1_pins_a: i2c1@0 { | |
| pins = "PB15", "PB16"; | |
| function = "i2c1"; | |
| }; | |
| i2c2_pins_a: i2c2@0 { | |
| pins = "PB17", "PB18"; | |
| function = "i2c2"; | |
| }; | |
| ir0_rx_pins_a: ir0@0 { | |
| pins = "PB4"; | |
| function = "ir0"; | |
| }; | |
| lcd_rgb565_pins: lcd_rgb565@0 { | |
| pins = "PD3", "PD4", "PD5", "PD6", "PD7", | |
| "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", | |
| "PD19", "PD20", "PD21", "PD22", "PD23", | |
| "PD24", "PD25", "PD26", "PD27"; | |
| function = "lcd0"; | |
| }; | |
| lcd_rgb666_pins: lcd_rgb666@0 { | |
| pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", | |
| "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", | |
| "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", | |
| "PD24", "PD25", "PD26", "PD27"; | |
| function = "lcd0"; | |
| }; | |
| mmc0_pins_a: mmc0@0 { | |
| pins = "PF0", "PF1", "PF2", "PF3", | |
| "PF4", "PF5"; | |
| function = "mmc0"; | |
| drive-strength = <30>; | |
| bias-pull-up; | |
| }; | |
| mmc2_pins_a: mmc2@0 { | |
| pins = "PC6", "PC7", "PC8", "PC9", | |
| "PC10", "PC11", "PC12", "PC13", | |
| "PC14", "PC15"; | |
| function = "mmc2"; | |
| drive-strength = <30>; | |
| bias-pull-up; | |
| }; | |
| mmc2_4bit_pins_a: mmc2-4bit@0 { | |
| pins = "PC6", "PC7", "PC8", "PC9", | |
| "PC10", "PC11"; | |
| function = "mmc2"; | |
| drive-strength = <30>; | |
| bias-pull-up; | |
| }; | |
| nand_pins_a: nand-base0@0 { | |
| pins = "PC0", "PC1", "PC2", | |
| "PC5", "PC8", "PC9", "PC10", | |
| "PC11", "PC12", "PC13", "PC14", | |
| "PC15"; | |
| function = "nand0"; | |
| }; | |
| nand_cs0_pins_a: nand-cs@0 { | |
| pins = "PC4"; | |
| function = "nand0"; | |
| }; | |
| nand_rb0_pins_a: nand-rb@0 { | |
| pins = "PC6"; | |
| function = "nand0"; | |
| }; | |
| spi2_pins_a: spi2@0 { | |
| pins = "PE1", "PE2", "PE3"; | |
| function = "spi2"; | |
| }; | |
| spi2_cs0_pins_a: spi2-cs0@0 { | |
| pins = "PE0"; | |
| function = "spi2"; | |
| }; | |
| uart1_pins_a: uart1@0 { | |
| pins = "PE10", "PE11"; | |
| function = "uart1"; | |
| }; | |
| uart1_pins_b: uart1@1 { | |
| pins = "PG3", "PG4"; | |
| function = "uart1"; | |
| }; | |
| uart2_pins_a: uart2@0 { | |
| pins = "PD2", "PD3"; | |
| function = "uart2"; | |
| }; | |
| uart2_cts_rts_pins_a: uart2-cts-rts@0 { | |
| pins = "PD4", "PD5"; | |
| function = "uart2"; | |
| }; | |
| uart3_pins_a: uart3@0 { | |
| pins = "PG9", "PG10"; | |
| function = "uart3"; | |
| }; | |
| uart3_cts_rts_pins_a: uart3-cts-rts@0 { | |
| pins = "PG11", "PG12"; | |
| function = "uart3"; | |
| }; | |
| pwm0_pins: pwm0 { | |
| pins = "PB2"; | |
| function = "pwm"; | |
| }; | |
| }; | |
| timer@1c20c00 { | |
| compatible = "allwinner,sun4i-a10-timer"; | |
| reg = <0x01c20c00 0x90>; | |
| interrupts = <22>; | |
| clocks = <&ccu CLK_HOSC>; | |
| }; | |
| wdt: watchdog@1c20c90 { | |
| compatible = "allwinner,sun4i-a10-wdt"; | |
| reg = <0x01c20c90 0x10>; | |
| }; | |
| ir0: ir@1c21800 { | |
| compatible = "allwinner,sun4i-a10-ir"; | |
| clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; | |
| clock-names = "apb", "ir"; | |
| interrupts = <5>; | |
| reg = <0x01c21800 0x40>; | |
| status = "disabled"; | |
| }; | |
| lradc: lradc@1c22800 { | |
| compatible = "allwinner,sun4i-a10-lradc-keys"; | |
| reg = <0x01c22800 0x100>; | |
| interrupts = <31>; | |
| status = "disabled"; | |
| }; | |
| codec: codec@1c22c00 { | |
| #sound-dai-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-codec"; | |
| reg = <0x01c22c00 0x40>; | |
| interrupts = <30>; | |
| clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; | |
| clock-names = "apb", "codec"; | |
| dmas = <&dma SUN4I_DMA_NORMAL 19>, | |
| <&dma SUN4I_DMA_NORMAL 19>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| }; | |
| sid: eeprom@1c23800 { | |
| compatible = "allwinner,sun4i-a10-sid"; | |
| reg = <0x01c23800 0x10>; | |
| }; | |
| rtp: rtp@1c25000 { | |
| compatible = "allwinner,sun5i-a13-ts"; | |
| reg = <0x01c25000 0x100>; | |
| interrupts = <29>; | |
| #thermal-sensor-cells = <0>; | |
| }; | |
| uart0: serial@1c28000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28000 0x400>; | |
| interrupts = <1>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&ccu CLK_APB1_UART0>; | |
| status = "disabled"; | |
| }; | |
| uart1: serial@1c28400 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28400 0x400>; | |
| interrupts = <2>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&ccu CLK_APB1_UART1>; | |
| status = "disabled"; | |
| }; | |
| uart2: serial@1c28800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28800 0x400>; | |
| interrupts = <3>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&ccu CLK_APB1_UART2>; | |
| status = "disabled"; | |
| }; | |
| uart3: serial@1c28c00 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28c00 0x400>; | |
| interrupts = <4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&ccu CLK_APB1_UART3>; | |
| status = "disabled"; | |
| }; | |
| i2c0: i2c@1c2ac00 { | |
| compatible = "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2ac00 0x400>; | |
| interrupts = <7>; | |
| clocks = <&ccu CLK_APB1_I2C0>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c1: i2c@1c2b000 { | |
| compatible = "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2b000 0x400>; | |
| interrupts = <8>; | |
| clocks = <&ccu CLK_APB1_I2C1>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c2: i2c@1c2b400 { | |
| compatible = "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2b400 0x400>; | |
| interrupts = <9>; | |
| clocks = <&ccu CLK_APB1_I2C2>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| timer@1c60000 { | |
| compatible = "allwinner,sun5i-a13-hstimer"; | |
| reg = <0x01c60000 0x1000>; | |
| interrupts = <82>, <83>; | |
| clocks = <&ccu CLK_AHB_HSTIMER>; | |
| }; | |
| fe0: display-frontend@1e00000 { | |
| compatible = "allwinner,sun5i-a13-display-frontend"; | |
| reg = <0x01e00000 0x20000>; | |
| interrupts = <47>; | |
| clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, | |
| <&ccu CLK_DRAM_DE_FE>; | |
| clock-names = "ahb", "mod", | |
| "ram"; | |
| resets = <&ccu RST_DE_FE>; | |
| status = "disabled"; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| fe0_out: port@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <1>; | |
| fe0_out_be0: endpoint@0 { | |
| reg = <0>; | |
| remote-endpoint = <&be0_in_fe0>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| be0: display-backend@1e60000 { | |
| compatible = "allwinner,sun5i-a13-display-backend"; | |
| reg = <0x01e60000 0x10000>; | |
| interrupts = <47>; | |
| clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, | |
| <&ccu CLK_DRAM_DE_BE>; | |
| clock-names = "ahb", "mod", | |
| "ram"; | |
| resets = <&ccu RST_DE_BE>; | |
| status = "disabled"; | |
| assigned-clocks = <&ccu CLK_DE_BE>; | |
| assigned-clock-rates = <300000000>; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| be0_in: port@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0>; | |
| be0_in_fe0: endpoint@0 { | |
| reg = <0>; | |
| remote-endpoint = <&fe0_out_be0>; | |
| }; | |
| }; | |
| be0_out: port@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <1>; | |
| be0_out_tcon0: endpoint@0 { | |
| reg = <0>; | |
| remote-endpoint = <&tcon0_in_be0>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |