| /* | 
 |  * arch/xtensa/kernel/time.c | 
 |  * | 
 |  * Timer and clock support. | 
 |  * | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (C) 2005 Tensilica Inc. | 
 |  * | 
 |  * Chris Zankel <chris@zankel.net> | 
 |  */ | 
 |  | 
 | #include <linux/errno.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/time.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/clockchips.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/profile.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/irqdomain.h> | 
 | #include <linux/sched_clock.h> | 
 |  | 
 | #include <asm/timex.h> | 
 | #include <asm/platform.h> | 
 |  | 
 | unsigned long ccount_freq;		/* ccount Hz */ | 
 | EXPORT_SYMBOL(ccount_freq); | 
 |  | 
 | static cycle_t ccount_read(struct clocksource *cs) | 
 | { | 
 | 	return (cycle_t)get_ccount(); | 
 | } | 
 |  | 
 | static u64 notrace ccount_sched_clock_read(void) | 
 | { | 
 | 	return get_ccount(); | 
 | } | 
 |  | 
 | static struct clocksource ccount_clocksource = { | 
 | 	.name = "ccount", | 
 | 	.rating = 200, | 
 | 	.read = ccount_read, | 
 | 	.mask = CLOCKSOURCE_MASK(32), | 
 | 	.flags = CLOCK_SOURCE_IS_CONTINUOUS, | 
 | }; | 
 |  | 
 | static int ccount_timer_set_next_event(unsigned long delta, | 
 | 		struct clock_event_device *dev); | 
 | struct ccount_timer { | 
 | 	struct clock_event_device evt; | 
 | 	int irq_enabled; | 
 | 	char name[24]; | 
 | }; | 
 | static DEFINE_PER_CPU(struct ccount_timer, ccount_timer); | 
 |  | 
 | static int ccount_timer_set_next_event(unsigned long delta, | 
 | 		struct clock_event_device *dev) | 
 | { | 
 | 	unsigned long flags, next; | 
 | 	int ret = 0; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	next = get_ccount() + delta; | 
 | 	set_linux_timer(next); | 
 | 	if (next - get_ccount() > delta) | 
 | 		ret = -ETIME; | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * There is no way to disable the timer interrupt at the device level, | 
 |  * only at the intenable register itself. Since enable_irq/disable_irq | 
 |  * calls are nested, we need to make sure that these calls are | 
 |  * balanced. | 
 |  */ | 
 | static int ccount_timer_shutdown(struct clock_event_device *evt) | 
 | { | 
 | 	struct ccount_timer *timer = | 
 | 		container_of(evt, struct ccount_timer, evt); | 
 |  | 
 | 	if (timer->irq_enabled) { | 
 | 		disable_irq(evt->irq); | 
 | 		timer->irq_enabled = 0; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ccount_timer_set_oneshot(struct clock_event_device *evt) | 
 | { | 
 | 	struct ccount_timer *timer = | 
 | 		container_of(evt, struct ccount_timer, evt); | 
 |  | 
 | 	if (!timer->irq_enabled) { | 
 | 		enable_irq(evt->irq); | 
 | 		timer->irq_enabled = 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static irqreturn_t timer_interrupt(int irq, void *dev_id); | 
 | static struct irqaction timer_irqaction = { | 
 | 	.handler =	timer_interrupt, | 
 | 	.flags =	IRQF_TIMER, | 
 | 	.name =		"timer", | 
 | }; | 
 |  | 
 | void local_timer_setup(unsigned cpu) | 
 | { | 
 | 	struct ccount_timer *timer = &per_cpu(ccount_timer, cpu); | 
 | 	struct clock_event_device *clockevent = &timer->evt; | 
 |  | 
 | 	timer->irq_enabled = 1; | 
 | 	clockevent->name = timer->name; | 
 | 	snprintf(timer->name, sizeof(timer->name), "ccount_clockevent_%u", cpu); | 
 | 	clockevent->features = CLOCK_EVT_FEAT_ONESHOT; | 
 | 	clockevent->rating = 300; | 
 | 	clockevent->set_next_event = ccount_timer_set_next_event; | 
 | 	clockevent->set_state_shutdown = ccount_timer_shutdown; | 
 | 	clockevent->set_state_oneshot = ccount_timer_set_oneshot; | 
 | 	clockevent->tick_resume = ccount_timer_set_oneshot; | 
 | 	clockevent->cpumask = cpumask_of(cpu); | 
 | 	clockevent->irq = irq_create_mapping(NULL, LINUX_TIMER_INT); | 
 | 	if (WARN(!clockevent->irq, "error: can't map timer irq")) | 
 | 		return; | 
 | 	clockevents_config_and_register(clockevent, ccount_freq, | 
 | 					0xf, 0xffffffff); | 
 | } | 
 |  | 
 | void __init time_init(void) | 
 | { | 
 | #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT | 
 | 	printk("Calibrating CPU frequency "); | 
 | 	platform_calibrate_ccount(); | 
 | 	printk("%d.%02d MHz\n", (int)ccount_freq/1000000, | 
 | 			(int)(ccount_freq/10000)%100); | 
 | #else | 
 | 	ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL; | 
 | #endif | 
 | 	clocksource_register_hz(&ccount_clocksource, ccount_freq); | 
 | 	local_timer_setup(0); | 
 | 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction); | 
 | 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq); | 
 | 	clocksource_probe(); | 
 | } | 
 |  | 
 | /* | 
 |  * The timer interrupt is called HZ times per second. | 
 |  */ | 
 |  | 
 | irqreturn_t timer_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct clock_event_device *evt = &this_cpu_ptr(&ccount_timer)->evt; | 
 |  | 
 | 	set_linux_timer(get_linux_timer()); | 
 | 	evt->event_handler(evt); | 
 |  | 
 | 	/* Allow platform to do something useful (Wdog). */ | 
 | 	platform_heartbeat(); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | #ifndef CONFIG_GENERIC_CALIBRATE_DELAY | 
 | void calibrate_delay(void) | 
 | { | 
 | 	loops_per_jiffy = ccount_freq / HZ; | 
 | 	printk("Calibrating delay loop (skipped)... " | 
 | 	       "%lu.%02lu BogoMIPS preset\n", | 
 | 	       loops_per_jiffy/(1000000/HZ), | 
 | 	       (loops_per_jiffy/(10000/HZ)) % 100); | 
 | } | 
 | #endif |