| /* |
| * This module provides common API to set Diagnostic trigger for MPT |
| * (Message Passing Technology) based controllers |
| * |
| * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c |
| * Copyright (C) 2012-2014 LSI Corporation |
| * Copyright (C) 2013-2014 Avago Technologies |
| * (mailto: MPT-FusionLinux.pdl@avagotech.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, |
| * USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/compat.h> |
| #include <linux/poll.h> |
| |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| #include "mpt3sas_base.h" |
| |
| /** |
| * _mpt3sas_raise_sigio - notifiy app |
| * @ioc: per adapter object |
| * @event_data: ? |
| */ |
| static void |
| _mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc, |
| struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data) |
| { |
| Mpi2EventNotificationReply_t *mpi_reply; |
| u16 sz, event_data_sz; |
| unsigned long flags; |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", |
| ioc->name, __func__)); |
| |
| sz = offsetof(Mpi2EventNotificationReply_t, EventData) + |
| sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4; |
| mpi_reply = kzalloc(sz, GFP_KERNEL); |
| if (!mpi_reply) |
| goto out; |
| mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED); |
| event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4; |
| mpi_reply->EventDataLength = cpu_to_le16(event_data_sz); |
| memcpy(&mpi_reply->EventData, event_data, |
| sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: add to driver event log\n", |
| ioc->name, __func__)); |
| mpt3sas_ctl_add_to_event_log(ioc, mpi_reply); |
| kfree(mpi_reply); |
| out: |
| |
| /* clearing the diag_trigger_active flag */ |
| spin_lock_irqsave(&ioc->diag_trigger_lock, flags); |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: clearing diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| ioc->diag_trigger_active = 0; |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |
| |
| /** |
| * mpt3sas_process_trigger_data - process the event data for the trigger |
| * @ioc: per adapter object |
| * @event_data: ? |
| */ |
| void |
| mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc, |
| struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data) |
| { |
| u8 issue_reset = 0; |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", |
| ioc->name, __func__)); |
| |
| /* release the diag buffer trace */ |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED) == 0) { |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: release trace diag buffer\n", ioc->name, __func__)); |
| mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, |
| &issue_reset); |
| } |
| |
| _mpt3sas_raise_sigio(ioc, event_data); |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |
| |
| /** |
| * mpt3sas_trigger_master - Master trigger handler |
| * @ioc: per adapter object |
| * @trigger_bitmask: |
| * |
| */ |
| void |
| mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask) |
| { |
| struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; |
| unsigned long flags; |
| u8 found_match = 0; |
| |
| spin_lock_irqsave(&ioc->diag_trigger_lock, flags); |
| |
| if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT || |
| trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) |
| goto by_pass_checks; |
| |
| /* check to see if trace buffers are currently registered */ |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| /* check to see if trace buffers are currently released */ |
| if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| by_pass_checks: |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: enter - trigger_bitmask = 0x%08x\n", |
| ioc->name, __func__, trigger_bitmask)); |
| |
| /* don't send trigger if an trigger is currently active */ |
| if (ioc->diag_trigger_active) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| goto out; |
| } |
| |
| /* check for the trigger condition */ |
| if (ioc->diag_trigger_master.MasterData & trigger_bitmask) { |
| found_match = 1; |
| ioc->diag_trigger_active = 1; |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: setting diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| } |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| |
| if (!found_match) |
| goto out; |
| |
| memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); |
| event_data.trigger_type = MPT3SAS_TRIGGER_MASTER; |
| event_data.u.master.MasterData = trigger_bitmask; |
| |
| if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT || |
| trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) |
| _mpt3sas_raise_sigio(ioc, &event_data); |
| else |
| mpt3sas_send_trigger_data_event(ioc, &event_data); |
| |
| out: |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |
| |
| /** |
| * mpt3sas_trigger_event - Event trigger handler |
| * @ioc: per adapter object |
| * @event: ? |
| * @log_entry_qualifier: ? |
| * |
| */ |
| void |
| mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event, |
| u16 log_entry_qualifier) |
| { |
| struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; |
| struct SL_WH_EVENT_TRIGGER_T *event_trigger; |
| int i; |
| unsigned long flags; |
| u8 found_match; |
| |
| spin_lock_irqsave(&ioc->diag_trigger_lock, flags); |
| |
| /* check to see if trace buffers are currently registered */ |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| /* check to see if trace buffers are currently released */ |
| if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n", |
| ioc->name, __func__, event, log_entry_qualifier)); |
| |
| /* don't send trigger if an trigger is currently active */ |
| if (ioc->diag_trigger_active) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| goto out; |
| } |
| |
| /* check for the trigger condition */ |
| event_trigger = ioc->diag_trigger_event.EventTriggerEntry; |
| for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries |
| && !found_match; i++, event_trigger++) { |
| if (event_trigger->EventValue != event) |
| continue; |
| if (event == MPI2_EVENT_LOG_ENTRY_ADDED) { |
| if (event_trigger->LogEntryQualifier == |
| log_entry_qualifier) |
| found_match = 1; |
| continue; |
| } |
| found_match = 1; |
| ioc->diag_trigger_active = 1; |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: setting diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| } |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| |
| if (!found_match) |
| goto out; |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: setting diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); |
| event_data.trigger_type = MPT3SAS_TRIGGER_EVENT; |
| event_data.u.event.EventValue = event; |
| event_data.u.event.LogEntryQualifier = log_entry_qualifier; |
| mpt3sas_send_trigger_data_event(ioc, &event_data); |
| out: |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |
| |
| /** |
| * mpt3sas_trigger_scsi - SCSI trigger handler |
| * @ioc: per adapter object |
| * @sense_key: ? |
| * @asc: ? |
| * @ascq: ? |
| * |
| */ |
| void |
| mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc, |
| u8 ascq) |
| { |
| struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; |
| struct SL_WH_SCSI_TRIGGER_T *scsi_trigger; |
| int i; |
| unsigned long flags; |
| u8 found_match; |
| |
| spin_lock_irqsave(&ioc->diag_trigger_lock, flags); |
| |
| /* check to see if trace buffers are currently registered */ |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| /* check to see if trace buffers are currently released */ |
| if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n", |
| ioc->name, __func__, sense_key, asc, ascq)); |
| |
| /* don't send trigger if an trigger is currently active */ |
| if (ioc->diag_trigger_active) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| goto out; |
| } |
| |
| /* check for the trigger condition */ |
| scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry; |
| for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries |
| && !found_match; i++, scsi_trigger++) { |
| if (scsi_trigger->SenseKey != sense_key) |
| continue; |
| if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc)) |
| continue; |
| if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq)) |
| continue; |
| found_match = 1; |
| ioc->diag_trigger_active = 1; |
| } |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| |
| if (!found_match) |
| goto out; |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: setting diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); |
| event_data.trigger_type = MPT3SAS_TRIGGER_SCSI; |
| event_data.u.scsi.SenseKey = sense_key; |
| event_data.u.scsi.ASC = asc; |
| event_data.u.scsi.ASCQ = ascq; |
| mpt3sas_send_trigger_data_event(ioc, &event_data); |
| out: |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |
| |
| /** |
| * mpt3sas_trigger_mpi - MPI trigger handler |
| * @ioc: per adapter object |
| * @ioc_status: ? |
| * @loginfo: ? |
| * |
| */ |
| void |
| mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo) |
| { |
| struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; |
| struct SL_WH_MPI_TRIGGER_T *mpi_trigger; |
| int i; |
| unsigned long flags; |
| u8 found_match; |
| |
| spin_lock_irqsave(&ioc->diag_trigger_lock, flags); |
| |
| /* check to see if trace buffers are currently registered */ |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| /* check to see if trace buffers are currently released */ |
| if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| return; |
| } |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n", |
| ioc->name, __func__, ioc_status, loginfo)); |
| |
| /* don't send trigger if an trigger is currently active */ |
| if (ioc->diag_trigger_active) { |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| goto out; |
| } |
| |
| /* check for the trigger condition */ |
| mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry; |
| for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries |
| && !found_match; i++, mpi_trigger++) { |
| if (mpi_trigger->IOCStatus != ioc_status) |
| continue; |
| if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF || |
| mpi_trigger->IocLogInfo == loginfo)) |
| continue; |
| found_match = 1; |
| ioc->diag_trigger_active = 1; |
| } |
| spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); |
| |
| if (!found_match) |
| goto out; |
| |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: setting diag_trigger_active flag\n", |
| ioc->name, __func__)); |
| memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); |
| event_data.trigger_type = MPT3SAS_TRIGGER_MPI; |
| event_data.u.mpi.IOCStatus = ioc_status; |
| event_data.u.mpi.IocLogInfo = loginfo; |
| mpt3sas_send_trigger_data_event(ioc, &event_data); |
| out: |
| dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| } |