| .. _kernelparameters: |
| |
| The kernel's command-line parameters |
| ==================================== |
| |
| The following is a consolidated list of the kernel parameters as |
| implemented by the __setup(), core_param() and module_param() macros |
| and sorted into English Dictionary order (defined as ignoring all |
| punctuation and sorting digits before letters in a case insensitive |
| manner), and with descriptions where known. |
| |
| The kernel parses parameters from the kernel command line up to "--"; |
| if it doesn't recognize a parameter and it doesn't contain a '.', the |
| parameter gets passed to init: parameters with '=' go into init's |
| environment, others are passed as command line arguments to init. |
| Everything after "--" is passed as an argument to init. |
| |
| Module parameters can be specified in two ways: via the kernel command |
| line with a module name prefix, or via modprobe, e.g.:: |
| |
| (kernel command line) usbcore.blinkenlights=1 |
| (modprobe command line) modprobe usbcore blinkenlights=1 |
| |
| Parameters for modules which are built into the kernel need to be |
| specified on the kernel command line. modprobe looks through the |
| kernel command line (/proc/cmdline) and collects module parameters |
| when it loads a module, so the kernel command line can be used for |
| loadable modules too. |
| |
| Hyphens (dashes) and underscores are equivalent in parameter names, so:: |
| |
| log_buf_len=1M print-fatal-signals=1 |
| |
| can also be entered as:: |
| |
| log-buf-len=1M print_fatal_signals=1 |
| |
| Double-quotes can be used to protect spaces in values, e.g.:: |
| |
| param="spaces in here" |
| |
| cpu lists: |
| ---------- |
| |
| Some kernel parameters take a list of CPUs as a value, e.g. isolcpus, |
| nohz_full, irqaffinity, rcu_nocbs. The format of this list is: |
| |
| <cpu number>,...,<cpu number> |
| |
| or |
| |
| <cpu number>-<cpu number> |
| (must be a positive range in ascending order) |
| |
| or a mixture |
| |
| <cpu number>,...,<cpu number>-<cpu number> |
| |
| Note that for the special case of a range one can split the range into equal |
| sized groups and for each group use some amount from the beginning of that |
| group: |
| |
| <cpu number>-cpu number>:<used size>/<group size> |
| |
| For example one can add to the command line following parameter: |
| |
| isolcpus=1,2,10-20,100-2000:2/25 |
| |
| where the final item represents CPUs 100,101,125,126,150,151,... |
| |
| |
| |
| This document may not be entirely up to date and comprehensive. The command |
| "modinfo -p ${modulename}" shows a current list of all parameters of a loadable |
| module. Loadable modules, after being loaded into the running kernel, also |
| reveal their parameters in /sys/module/${modulename}/parameters/. Some of these |
| parameters may be changed at runtime by the command |
| ``echo -n ${value} > /sys/module/${modulename}/parameters/${parm}``. |
| |
| The parameters listed below are only valid if certain kernel build options were |
| enabled and if respective hardware is present. The text in square brackets at |
| the beginning of each description states the restrictions within which a |
| parameter is applicable:: |
| |
| ACPI ACPI support is enabled. |
| AGP AGP (Accelerated Graphics Port) is enabled. |
| ALSA ALSA sound support is enabled. |
| APIC APIC support is enabled. |
| APM Advanced Power Management support is enabled. |
| ARM ARM architecture is enabled. |
| AX25 Appropriate AX.25 support is enabled. |
| CLK Common clock infrastructure is enabled. |
| CMA Contiguous Memory Area support is enabled. |
| DRM Direct Rendering Management support is enabled. |
| DYNAMIC_DEBUG Build in debug messages and enable them at runtime |
| EDD BIOS Enhanced Disk Drive Services (EDD) is enabled |
| EFI EFI Partitioning (GPT) is enabled |
| EIDE EIDE/ATAPI support is enabled. |
| EVM Extended Verification Module |
| FB The frame buffer device is enabled. |
| FTRACE Function tracing enabled. |
| GCOV GCOV profiling is enabled. |
| HW Appropriate hardware is enabled. |
| IA-64 IA-64 architecture is enabled. |
| IMA Integrity measurement architecture is enabled. |
| IOSCHED More than one I/O scheduler is enabled. |
| IP_PNP IP DHCP, BOOTP, or RARP is enabled. |
| IPV6 IPv6 support is enabled. |
| ISAPNP ISA PnP code is enabled. |
| ISDN Appropriate ISDN support is enabled. |
| ISOL CPU Isolation is enabled. |
| JOY Appropriate joystick support is enabled. |
| KGDB Kernel debugger support is enabled. |
| KVM Kernel Virtual Machine support is enabled. |
| LIBATA Libata driver is enabled |
| LP Printer support is enabled. |
| LOOP Loopback device support is enabled. |
| M68k M68k architecture is enabled. |
| These options have more detailed description inside of |
| Documentation/m68k/kernel-options.txt. |
| MDA MDA console support is enabled. |
| MIPS MIPS architecture is enabled. |
| MOUSE Appropriate mouse support is enabled. |
| MSI Message Signaled Interrupts (PCI). |
| MTD MTD (Memory Technology Device) support is enabled. |
| NET Appropriate network support is enabled. |
| NUMA NUMA support is enabled. |
| NFS Appropriate NFS support is enabled. |
| OSS OSS sound support is enabled. |
| PV_OPS A paravirtualized kernel is enabled. |
| PARIDE The ParIDE (parallel port IDE) subsystem is enabled. |
| PARISC The PA-RISC architecture is enabled. |
| PCI PCI bus support is enabled. |
| PCIE PCI Express support is enabled. |
| PCMCIA The PCMCIA subsystem is enabled. |
| PNP Plug & Play support is enabled. |
| PPC PowerPC architecture is enabled. |
| PPT Parallel port support is enabled. |
| PS2 Appropriate PS/2 support is enabled. |
| RAM RAM disk support is enabled. |
| RDT Intel Resource Director Technology. |
| S390 S390 architecture is enabled. |
| SCSI Appropriate SCSI support is enabled. |
| A lot of drivers have their options described inside |
| the Documentation/scsi/ sub-directory. |
| SECURITY Different security models are enabled. |
| SELINUX SELinux support is enabled. |
| APPARMOR AppArmor support is enabled. |
| SERIAL Serial support is enabled. |
| SH SuperH architecture is enabled. |
| SMP The kernel is an SMP kernel. |
| SPARC Sparc architecture is enabled. |
| SWSUSP Software suspend (hibernation) is enabled. |
| SUSPEND System suspend states are enabled. |
| TPM TPM drivers are enabled. |
| TS Appropriate touchscreen support is enabled. |
| UMS USB Mass Storage support is enabled. |
| USB USB support is enabled. |
| USBHID USB Human Interface Device support is enabled. |
| V4L Video For Linux support is enabled. |
| VMMIO Driver for memory mapped virtio devices is enabled. |
| VGA The VGA console has been enabled. |
| VT Virtual terminal support is enabled. |
| WDT Watchdog support is enabled. |
| XT IBM PC/XT MFM hard disk support is enabled. |
| X86-32 X86-32, aka i386 architecture is enabled. |
| X86-64 X86-64 architecture is enabled. |
| More X86-64 boot options can be found in |
| Documentation/x86/x86_64/boot-options.txt . |
| X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) |
| X86_UV SGI UV support is enabled. |
| XEN Xen support is enabled |
| |
| In addition, the following text indicates that the option:: |
| |
| BUGS= Relates to possible processor bugs on the said processor. |
| KNL Is a kernel start-up parameter. |
| BOOT Is a boot loader parameter. |
| |
| Parameters denoted with BOOT are actually interpreted by the boot |
| loader, and have no meaning to the kernel directly. |
| Do not modify the syntax of boot loader parameters without extreme |
| need or coordination with <Documentation/x86/boot.txt>. |
| |
| There are also arch-specific kernel-parameters not documented here. |
| See for example <Documentation/x86/x86_64/boot-options.txt>. |
| |
| Note that ALL kernel parameters listed below are CASE SENSITIVE, and that |
| a trailing = on the name of any parameter states that that parameter will |
| be entered as an environment variable, whereas its absence indicates that |
| it will appear as a kernel argument readable via /proc/cmdline by programs |
| running once the system is up. |
| |
| The number of kernel parameters is not limited, but the length of the |
| complete command line (parameters including spaces etc.) is limited to |
| a fixed number of characters. This limit depends on the architecture |
| and is between 256 and 4096 characters. It is defined in the file |
| ./include/asm/setup.h as COMMAND_LINE_SIZE. |
| |
| Finally, the [KMG] suffix is commonly described after a number of kernel |
| parameter values. These 'K', 'M', and 'G' letters represent the _binary_ |
| multipliers 'Kilo', 'Mega', and 'Giga', equaling 2^10, 2^20, and 2^30 |
| bytes respectively. Such letter suffixes can also be entirely omitted: |
| |
| .. include:: kernel-parameters.txt |
| :literal: |
| |
| Todo |
| ---- |
| |
| Add more DRM drivers. |
