| /* | |
| * IEEE 802.11 defines | |
| * | |
| * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen | |
| * <jkmaline@cc.hut.fi> | |
| * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> | |
| * Copyright (c) 2005, Devicescape Software, Inc. | |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #ifndef LINUX_IEEE80211_H | |
| #define LINUX_IEEE80211_H | |
| #include <linux/types.h> | |
| #include <asm/byteorder.h> | |
| /* | |
| * DS bit usage | |
| * | |
| * TA = transmitter address | |
| * RA = receiver address | |
| * DA = destination address | |
| * SA = source address | |
| * | |
| * ToDS FromDS A1(RA) A2(TA) A3 A4 Use | |
| * ----------------------------------------------------------------- | |
| * 0 0 DA SA BSSID - IBSS/DLS | |
| * 0 1 DA BSSID SA - AP -> STA | |
| * 1 0 BSSID SA DA - AP <- STA | |
| * 1 1 RA TA DA SA unspecified (WDS) | |
| */ | |
| #define FCS_LEN 4 | |
| #define IEEE80211_FCTL_VERS 0x0003 | |
| #define IEEE80211_FCTL_FTYPE 0x000c | |
| #define IEEE80211_FCTL_STYPE 0x00f0 | |
| #define IEEE80211_FCTL_TODS 0x0100 | |
| #define IEEE80211_FCTL_FROMDS 0x0200 | |
| #define IEEE80211_FCTL_MOREFRAGS 0x0400 | |
| #define IEEE80211_FCTL_RETRY 0x0800 | |
| #define IEEE80211_FCTL_PM 0x1000 | |
| #define IEEE80211_FCTL_MOREDATA 0x2000 | |
| #define IEEE80211_FCTL_PROTECTED 0x4000 | |
| #define IEEE80211_FCTL_ORDER 0x8000 | |
| #define IEEE80211_SCTL_FRAG 0x000F | |
| #define IEEE80211_SCTL_SEQ 0xFFF0 | |
| #define IEEE80211_FTYPE_MGMT 0x0000 | |
| #define IEEE80211_FTYPE_CTL 0x0004 | |
| #define IEEE80211_FTYPE_DATA 0x0008 | |
| /* management */ | |
| #define IEEE80211_STYPE_ASSOC_REQ 0x0000 | |
| #define IEEE80211_STYPE_ASSOC_RESP 0x0010 | |
| #define IEEE80211_STYPE_REASSOC_REQ 0x0020 | |
| #define IEEE80211_STYPE_REASSOC_RESP 0x0030 | |
| #define IEEE80211_STYPE_PROBE_REQ 0x0040 | |
| #define IEEE80211_STYPE_PROBE_RESP 0x0050 | |
| #define IEEE80211_STYPE_BEACON 0x0080 | |
| #define IEEE80211_STYPE_ATIM 0x0090 | |
| #define IEEE80211_STYPE_DISASSOC 0x00A0 | |
| #define IEEE80211_STYPE_AUTH 0x00B0 | |
| #define IEEE80211_STYPE_DEAUTH 0x00C0 | |
| #define IEEE80211_STYPE_ACTION 0x00D0 | |
| /* control */ | |
| #define IEEE80211_STYPE_BACK_REQ 0x0080 | |
| #define IEEE80211_STYPE_BACK 0x0090 | |
| #define IEEE80211_STYPE_PSPOLL 0x00A0 | |
| #define IEEE80211_STYPE_RTS 0x00B0 | |
| #define IEEE80211_STYPE_CTS 0x00C0 | |
| #define IEEE80211_STYPE_ACK 0x00D0 | |
| #define IEEE80211_STYPE_CFEND 0x00E0 | |
| #define IEEE80211_STYPE_CFENDACK 0x00F0 | |
| /* data */ | |
| #define IEEE80211_STYPE_DATA 0x0000 | |
| #define IEEE80211_STYPE_DATA_CFACK 0x0010 | |
| #define IEEE80211_STYPE_DATA_CFPOLL 0x0020 | |
| #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 | |
| #define IEEE80211_STYPE_NULLFUNC 0x0040 | |
| #define IEEE80211_STYPE_CFACK 0x0050 | |
| #define IEEE80211_STYPE_CFPOLL 0x0060 | |
| #define IEEE80211_STYPE_CFACKPOLL 0x0070 | |
| #define IEEE80211_STYPE_QOS_DATA 0x0080 | |
| #define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 | |
| #define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 | |
| #define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 | |
| #define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 | |
| #define IEEE80211_STYPE_QOS_CFACK 0x00D0 | |
| #define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 | |
| #define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 | |
| /* miscellaneous IEEE 802.11 constants */ | |
| #define IEEE80211_MAX_FRAG_THRESHOLD 2352 | |
| #define IEEE80211_MAX_RTS_THRESHOLD 2353 | |
| #define IEEE80211_MAX_AID 2007 | |
| #define IEEE80211_MAX_TIM_LEN 251 | |
| /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section | |
| 6.2.1.1.2. | |
| 802.11e clarifies the figure in section 7.1.2. The frame body is | |
| up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */ | |
| #define IEEE80211_MAX_DATA_LEN 2304 | |
| /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ | |
| #define IEEE80211_MAX_FRAME_LEN 2352 | |
| #define IEEE80211_MAX_SSID_LEN 32 | |
| #define IEEE80211_MAX_MESH_ID_LEN 32 | |
| #define IEEE80211_MESH_CONFIG_LEN 19 | |
| #define IEEE80211_QOS_CTL_LEN 2 | |
| #define IEEE80211_QOS_CTL_TID_MASK 0x000F | |
| #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 | |
| struct ieee80211_hdr { | |
| __le16 frame_control; | |
| __le16 duration_id; | |
| u8 addr1[6]; | |
| u8 addr2[6]; | |
| u8 addr3[6]; | |
| __le16 seq_ctrl; | |
| u8 addr4[6]; | |
| } __attribute__ ((packed)); | |
| /** | |
| * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_tods(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_fromds(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_a4(__le16 fc) | |
| { | |
| __le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); | |
| return (fc & tmp) == tmp; | |
| } | |
| /** | |
| * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_morefrags(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_retry(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_pm(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_moredata(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_protected(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_has_order(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0; | |
| } | |
| /** | |
| * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_mgmt(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT); | |
| } | |
| /** | |
| * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_ctl(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL); | |
| } | |
| /** | |
| * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_data(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA); | |
| } | |
| /** | |
| * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_data_qos(__le16 fc) | |
| { | |
| /* | |
| * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need | |
| * to check the one bit | |
| */ | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA); | |
| } | |
| /** | |
| * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_data_present(__le16 fc) | |
| { | |
| /* | |
| * mask with 0x40 and test that that bit is clear to only return true | |
| * for the data-containing substypes. | |
| */ | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA); | |
| } | |
| /** | |
| * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_assoc_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ); | |
| } | |
| /** | |
| * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_assoc_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP); | |
| } | |
| /** | |
| * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_reassoc_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ); | |
| } | |
| /** | |
| * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_reassoc_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP); | |
| } | |
| /** | |
| * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_probe_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ); | |
| } | |
| /** | |
| * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_probe_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); | |
| } | |
| /** | |
| * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_beacon(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); | |
| } | |
| /** | |
| * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_atim(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM); | |
| } | |
| /** | |
| * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_disassoc(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC); | |
| } | |
| /** | |
| * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_auth(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); | |
| } | |
| /** | |
| * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_deauth(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH); | |
| } | |
| /** | |
| * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_action(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION); | |
| } | |
| /** | |
| * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_back_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ); | |
| } | |
| /** | |
| * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_back(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK); | |
| } | |
| /** | |
| * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_pspoll(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); | |
| } | |
| /** | |
| * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_rts(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | |
| } | |
| /** | |
| * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_cts(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | |
| } | |
| /** | |
| * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_ack(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK); | |
| } | |
| /** | |
| * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_cfend(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND); | |
| } | |
| /** | |
| * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_cfendack(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK); | |
| } | |
| /** | |
| * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC | |
| * @fc: frame control bytes in little-endian byteorder | |
| */ | |
| static inline int ieee80211_is_nullfunc(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC); | |
| } | |
| struct ieee80211s_hdr { | |
| u8 flags; | |
| u8 ttl; | |
| __le32 seqnum; | |
| u8 eaddr1[6]; | |
| u8 eaddr2[6]; | |
| u8 eaddr3[6]; | |
| } __attribute__ ((packed)); | |
| /* Mesh flags */ | |
| #define MESH_FLAGS_AE_A4 0x1 | |
| #define MESH_FLAGS_AE_A5_A6 0x2 | |
| #define MESH_FLAGS_PS_DEEP 0x4 | |
| /** | |
| * struct ieee80211_quiet_ie | |
| * | |
| * This structure refers to "Quiet information element" | |
| */ | |
| struct ieee80211_quiet_ie { | |
| u8 count; | |
| u8 period; | |
| __le16 duration; | |
| __le16 offset; | |
| } __attribute__ ((packed)); | |
| /** | |
| * struct ieee80211_msrment_ie | |
| * | |
| * This structure refers to "Measurement Request/Report information element" | |
| */ | |
| struct ieee80211_msrment_ie { | |
| u8 token; | |
| u8 mode; | |
| u8 type; | |
| u8 request[0]; | |
| } __attribute__ ((packed)); | |
| /** | |
| * struct ieee80211_channel_sw_ie | |
| * | |
| * This structure refers to "Channel Switch Announcement information element" | |
| */ | |
| struct ieee80211_channel_sw_ie { | |
| u8 mode; | |
| u8 new_ch_num; | |
| u8 count; | |
| } __attribute__ ((packed)); | |
| /** | |
| * struct ieee80211_tim | |
| * | |
| * This structure refers to "Traffic Indication Map information element" | |
| */ | |
| struct ieee80211_tim_ie { | |
| u8 dtim_count; | |
| u8 dtim_period; | |
| u8 bitmap_ctrl; | |
| /* variable size: 1 - 251 bytes */ | |
| u8 virtual_map[0]; | |
| } __attribute__ ((packed)); | |
| #define WLAN_SA_QUERY_TR_ID_LEN 16 | |
| struct ieee80211_mgmt { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 da[6]; | |
| u8 sa[6]; | |
| u8 bssid[6]; | |
| __le16 seq_ctrl; | |
| union { | |
| struct { | |
| __le16 auth_alg; | |
| __le16 auth_transaction; | |
| __le16 status_code; | |
| /* possibly followed by Challenge text */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) auth; | |
| struct { | |
| __le16 reason_code; | |
| } __attribute__ ((packed)) deauth; | |
| struct { | |
| __le16 capab_info; | |
| __le16 listen_interval; | |
| /* followed by SSID and Supported rates */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) assoc_req; | |
| struct { | |
| __le16 capab_info; | |
| __le16 status_code; | |
| __le16 aid; | |
| /* followed by Supported rates */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) assoc_resp, reassoc_resp; | |
| struct { | |
| __le16 capab_info; | |
| __le16 listen_interval; | |
| u8 current_ap[6]; | |
| /* followed by SSID and Supported rates */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) reassoc_req; | |
| struct { | |
| __le16 reason_code; | |
| } __attribute__ ((packed)) disassoc; | |
| struct { | |
| __le64 timestamp; | |
| __le16 beacon_int; | |
| __le16 capab_info; | |
| /* followed by some of SSID, Supported rates, | |
| * FH Params, DS Params, CF Params, IBSS Params, TIM */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) beacon; | |
| struct { | |
| /* only variable items: SSID, Supported rates */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) probe_req; | |
| struct { | |
| __le64 timestamp; | |
| __le16 beacon_int; | |
| __le16 capab_info; | |
| /* followed by some of SSID, Supported rates, | |
| * FH Params, DS Params, CF Params, IBSS Params */ | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) probe_resp; | |
| struct { | |
| u8 category; | |
| union { | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 status_code; | |
| u8 variable[0]; | |
| } __attribute__ ((packed)) wme_action; | |
| struct{ | |
| u8 action_code; | |
| u8 element_id; | |
| u8 length; | |
| struct ieee80211_channel_sw_ie sw_elem; | |
| } __attribute__((packed)) chan_switch; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 element_id; | |
| u8 length; | |
| struct ieee80211_msrment_ie msr_elem; | |
| } __attribute__((packed)) measurement; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 capab; | |
| __le16 timeout; | |
| __le16 start_seq_num; | |
| } __attribute__((packed)) addba_req; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 status; | |
| __le16 capab; | |
| __le16 timeout; | |
| } __attribute__((packed)) addba_resp; | |
| struct{ | |
| u8 action_code; | |
| __le16 params; | |
| __le16 reason_code; | |
| } __attribute__((packed)) delba; | |
| struct{ | |
| u8 action_code; | |
| /* capab_info for open and confirm, | |
| * reason for close | |
| */ | |
| __le16 aux; | |
| /* Followed in plink_confirm by status | |
| * code, AID and supported rates, | |
| * and directly by supported rates in | |
| * plink_open and plink_close | |
| */ | |
| u8 variable[0]; | |
| } __attribute__((packed)) plink_action; | |
| struct{ | |
| u8 action_code; | |
| u8 variable[0]; | |
| } __attribute__((packed)) mesh_action; | |
| struct { | |
| u8 action; | |
| u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; | |
| } __attribute__ ((packed)) sa_query; | |
| } u; | |
| } __attribute__ ((packed)) action; | |
| } u; | |
| } __attribute__ ((packed)); | |
| /* mgmt header + 1 byte category code */ | |
| #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) | |
| /* Management MIC information element (IEEE 802.11w) */ | |
| struct ieee80211_mmie { | |
| u8 element_id; | |
| u8 length; | |
| __le16 key_id; | |
| u8 sequence_number[6]; | |
| u8 mic[8]; | |
| } __attribute__ ((packed)); | |
| /* Control frames */ | |
| struct ieee80211_rts { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 ra[6]; | |
| u8 ta[6]; | |
| } __attribute__ ((packed)); | |
| struct ieee80211_cts { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 ra[6]; | |
| } __attribute__ ((packed)); | |
| struct ieee80211_pspoll { | |
| __le16 frame_control; | |
| __le16 aid; | |
| u8 bssid[6]; | |
| u8 ta[6]; | |
| } __attribute__ ((packed)); | |
| /** | |
| * struct ieee80211_bar - HT Block Ack Request | |
| * | |
| * This structure refers to "HT BlockAckReq" as | |
| * described in 802.11n draft section 7.2.1.7.1 | |
| */ | |
| struct ieee80211_bar { | |
| __le16 frame_control; | |
| __le16 duration; | |
| __u8 ra[6]; | |
| __u8 ta[6]; | |
| __le16 control; | |
| __le16 start_seq_num; | |
| } __attribute__((packed)); | |
| /* 802.11 BAR control masks */ | |
| #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 | |
| #define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 | |
| #define IEEE80211_HT_MCS_MASK_LEN 10 | |
| /** | |
| * struct ieee80211_mcs_info - MCS information | |
| * @rx_mask: RX mask | |
| * @rx_highest: highest supported RX rate | |
| * @tx_params: TX parameters | |
| */ | |
| struct ieee80211_mcs_info { | |
| u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; | |
| __le16 rx_highest; | |
| u8 tx_params; | |
| u8 reserved[3]; | |
| } __attribute__((packed)); | |
| /* 802.11n HT capability MSC set */ | |
| #define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff | |
| #define IEEE80211_HT_MCS_TX_DEFINED 0x01 | |
| #define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 | |
| /* value 0 == 1 stream etc */ | |
| #define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C | |
| #define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 | |
| #define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 | |
| #define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 | |
| /* | |
| * 802.11n D5.0 20.3.5 / 20.6 says: | |
| * - indices 0 to 7 and 32 are single spatial stream | |
| * - 8 to 31 are multiple spatial streams using equal modulation | |
| * [8..15 for two streams, 16..23 for three and 24..31 for four] | |
| * - remainder are multiple spatial streams using unequal modulation | |
| */ | |
| #define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 | |
| #define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ | |
| (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) | |
| /** | |
| * struct ieee80211_ht_cap - HT capabilities | |
| * | |
| * This structure is the "HT capabilities element" as | |
| * described in 802.11n D5.0 7.3.2.57 | |
| */ | |
| struct ieee80211_ht_cap { | |
| __le16 cap_info; | |
| u8 ampdu_params_info; | |
| /* 16 bytes MCS information */ | |
| struct ieee80211_mcs_info mcs; | |
| __le16 extended_ht_cap_info; | |
| __le32 tx_BF_cap_info; | |
| u8 antenna_selection_info; | |
| } __attribute__ ((packed)); | |
| /* 802.11n HT capabilities masks (for cap_info) */ | |
| #define IEEE80211_HT_CAP_LDPC_CODING 0x0001 | |
| #define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 | |
| #define IEEE80211_HT_CAP_SM_PS 0x000C | |
| #define IEEE80211_HT_CAP_GRN_FLD 0x0010 | |
| #define IEEE80211_HT_CAP_SGI_20 0x0020 | |
| #define IEEE80211_HT_CAP_SGI_40 0x0040 | |
| #define IEEE80211_HT_CAP_TX_STBC 0x0080 | |
| #define IEEE80211_HT_CAP_RX_STBC 0x0300 | |
| #define IEEE80211_HT_CAP_DELAY_BA 0x0400 | |
| #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 | |
| #define IEEE80211_HT_CAP_DSSSCCK40 0x1000 | |
| #define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 | |
| #define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 | |
| #define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 | |
| /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ | |
| #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 | |
| #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C | |
| /** | |
| * struct ieee80211_ht_info - HT information | |
| * | |
| * This structure is the "HT information element" as | |
| * described in 802.11n D5.0 7.3.2.58 | |
| */ | |
| struct ieee80211_ht_info { | |
| u8 control_chan; | |
| u8 ht_param; | |
| __le16 operation_mode; | |
| __le16 stbc_param; | |
| u8 basic_set[16]; | |
| } __attribute__ ((packed)); | |
| /* for ht_param */ | |
| #define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 | |
| #define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 | |
| #define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 | |
| #define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 | |
| #define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 | |
| #define IEEE80211_HT_PARAM_RIFS_MODE 0x08 | |
| #define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 | |
| #define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 | |
| /* for operation_mode */ | |
| #define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 | |
| #define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 | |
| #define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 | |
| #define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 | |
| #define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 | |
| #define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 | |
| #define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 | |
| /* for stbc_param */ | |
| #define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 | |
| #define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 | |
| #define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 | |
| #define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 | |
| #define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 | |
| #define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 | |
| /* block-ack parameters */ | |
| #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 | |
| #define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C | |
| #define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0 | |
| #define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 | |
| #define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 | |
| /* | |
| * A-PMDU buffer sizes | |
| * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) | |
| */ | |
| #define IEEE80211_MIN_AMPDU_BUF 0x8 | |
| #define IEEE80211_MAX_AMPDU_BUF 0x40 | |
| /* Spatial Multiplexing Power Save Modes */ | |
| #define WLAN_HT_CAP_SM_PS_STATIC 0 | |
| #define WLAN_HT_CAP_SM_PS_DYNAMIC 1 | |
| #define WLAN_HT_CAP_SM_PS_INVALID 2 | |
| #define WLAN_HT_CAP_SM_PS_DISABLED 3 | |
| /* Authentication algorithms */ | |
| #define WLAN_AUTH_OPEN 0 | |
| #define WLAN_AUTH_SHARED_KEY 1 | |
| #define WLAN_AUTH_FT 2 | |
| #define WLAN_AUTH_LEAP 128 | |
| #define WLAN_AUTH_CHALLENGE_LEN 128 | |
| #define WLAN_CAPABILITY_ESS (1<<0) | |
| #define WLAN_CAPABILITY_IBSS (1<<1) | |
| #define WLAN_CAPABILITY_CF_POLLABLE (1<<2) | |
| #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) | |
| #define WLAN_CAPABILITY_PRIVACY (1<<4) | |
| #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) | |
| #define WLAN_CAPABILITY_PBCC (1<<6) | |
| #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) | |
| /* 802.11h */ | |
| #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) | |
| #define WLAN_CAPABILITY_QOS (1<<9) | |
| #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) | |
| #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) | |
| /* measurement */ | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED (1<<2) | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 | |
| /* 802.11g ERP information element */ | |
| #define WLAN_ERP_NON_ERP_PRESENT (1<<0) | |
| #define WLAN_ERP_USE_PROTECTION (1<<1) | |
| #define WLAN_ERP_BARKER_PREAMBLE (1<<2) | |
| /* WLAN_ERP_BARKER_PREAMBLE values */ | |
| enum { | |
| WLAN_ERP_PREAMBLE_SHORT = 0, | |
| WLAN_ERP_PREAMBLE_LONG = 1, | |
| }; | |
| /* Status codes */ | |
| enum ieee80211_statuscode { | |
| WLAN_STATUS_SUCCESS = 0, | |
| WLAN_STATUS_UNSPECIFIED_FAILURE = 1, | |
| WLAN_STATUS_CAPS_UNSUPPORTED = 10, | |
| WLAN_STATUS_REASSOC_NO_ASSOC = 11, | |
| WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12, | |
| WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13, | |
| WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14, | |
| WLAN_STATUS_CHALLENGE_FAIL = 15, | |
| WLAN_STATUS_AUTH_TIMEOUT = 16, | |
| WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17, | |
| WLAN_STATUS_ASSOC_DENIED_RATES = 18, | |
| /* 802.11b */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19, | |
| WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20, | |
| WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21, | |
| /* 802.11h */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22, | |
| WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23, | |
| WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24, | |
| /* 802.11g */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, | |
| WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, | |
| /* 802.11w */ | |
| WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30, | |
| WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31, | |
| /* 802.11i */ | |
| WLAN_STATUS_INVALID_IE = 40, | |
| WLAN_STATUS_INVALID_GROUP_CIPHER = 41, | |
| WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42, | |
| WLAN_STATUS_INVALID_AKMP = 43, | |
| WLAN_STATUS_UNSUPP_RSN_VERSION = 44, | |
| WLAN_STATUS_INVALID_RSN_IE_CAP = 45, | |
| WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, | |
| /* 802.11e */ | |
| WLAN_STATUS_UNSPECIFIED_QOS = 32, | |
| WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33, | |
| WLAN_STATUS_ASSOC_DENIED_LOWACK = 34, | |
| WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35, | |
| WLAN_STATUS_REQUEST_DECLINED = 37, | |
| WLAN_STATUS_INVALID_QOS_PARAM = 38, | |
| WLAN_STATUS_CHANGE_TSPEC = 39, | |
| WLAN_STATUS_WAIT_TS_DELAY = 47, | |
| WLAN_STATUS_NO_DIRECT_LINK = 48, | |
| WLAN_STATUS_STA_NOT_PRESENT = 49, | |
| WLAN_STATUS_STA_NOT_QSTA = 50, | |
| }; | |
| /* Reason codes */ | |
| enum ieee80211_reasoncode { | |
| WLAN_REASON_UNSPECIFIED = 1, | |
| WLAN_REASON_PREV_AUTH_NOT_VALID = 2, | |
| WLAN_REASON_DEAUTH_LEAVING = 3, | |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4, | |
| WLAN_REASON_DISASSOC_AP_BUSY = 5, | |
| WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6, | |
| WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7, | |
| WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8, | |
| WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9, | |
| /* 802.11h */ | |
| WLAN_REASON_DISASSOC_BAD_POWER = 10, | |
| WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11, | |
| /* 802.11i */ | |
| WLAN_REASON_INVALID_IE = 13, | |
| WLAN_REASON_MIC_FAILURE = 14, | |
| WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, | |
| WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16, | |
| WLAN_REASON_IE_DIFFERENT = 17, | |
| WLAN_REASON_INVALID_GROUP_CIPHER = 18, | |
| WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19, | |
| WLAN_REASON_INVALID_AKMP = 20, | |
| WLAN_REASON_UNSUPP_RSN_VERSION = 21, | |
| WLAN_REASON_INVALID_RSN_IE_CAP = 22, | |
| WLAN_REASON_IEEE8021X_FAILED = 23, | |
| WLAN_REASON_CIPHER_SUITE_REJECTED = 24, | |
| /* 802.11e */ | |
| WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, | |
| WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, | |
| WLAN_REASON_DISASSOC_LOW_ACK = 34, | |
| WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35, | |
| WLAN_REASON_QSTA_LEAVE_QBSS = 36, | |
| WLAN_REASON_QSTA_NOT_USE = 37, | |
| WLAN_REASON_QSTA_REQUIRE_SETUP = 38, | |
| WLAN_REASON_QSTA_TIMEOUT = 39, | |
| WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45, | |
| }; | |
| /* Information Element IDs */ | |
| enum ieee80211_eid { | |
| WLAN_EID_SSID = 0, | |
| WLAN_EID_SUPP_RATES = 1, | |
| WLAN_EID_FH_PARAMS = 2, | |
| WLAN_EID_DS_PARAMS = 3, | |
| WLAN_EID_CF_PARAMS = 4, | |
| WLAN_EID_TIM = 5, | |
| WLAN_EID_IBSS_PARAMS = 6, | |
| WLAN_EID_CHALLENGE = 16, | |
| /* 802.11d */ | |
| WLAN_EID_COUNTRY = 7, | |
| WLAN_EID_HP_PARAMS = 8, | |
| WLAN_EID_HP_TABLE = 9, | |
| WLAN_EID_REQUEST = 10, | |
| /* 802.11e */ | |
| WLAN_EID_QBSS_LOAD = 11, | |
| WLAN_EID_EDCA_PARAM_SET = 12, | |
| WLAN_EID_TSPEC = 13, | |
| WLAN_EID_TCLAS = 14, | |
| WLAN_EID_SCHEDULE = 15, | |
| WLAN_EID_TS_DELAY = 43, | |
| WLAN_EID_TCLAS_PROCESSING = 44, | |
| WLAN_EID_QOS_CAPA = 46, | |
| /* 802.11s | |
| * | |
| * All mesh EID numbers are pending IEEE 802.11 ANA approval. | |
| * The numbers have been incremented from those suggested in | |
| * 802.11s/D2.0 so that MESH_CONFIG does not conflict with | |
| * EXT_SUPP_RATES. | |
| */ | |
| WLAN_EID_MESH_CONFIG = 51, | |
| WLAN_EID_MESH_ID = 52, | |
| WLAN_EID_PEER_LINK = 55, | |
| WLAN_EID_PREQ = 68, | |
| WLAN_EID_PREP = 69, | |
| WLAN_EID_PERR = 70, | |
| /* 802.11h */ | |
| WLAN_EID_PWR_CONSTRAINT = 32, | |
| WLAN_EID_PWR_CAPABILITY = 33, | |
| WLAN_EID_TPC_REQUEST = 34, | |
| WLAN_EID_TPC_REPORT = 35, | |
| WLAN_EID_SUPPORTED_CHANNELS = 36, | |
| WLAN_EID_CHANNEL_SWITCH = 37, | |
| WLAN_EID_MEASURE_REQUEST = 38, | |
| WLAN_EID_MEASURE_REPORT = 39, | |
| WLAN_EID_QUIET = 40, | |
| WLAN_EID_IBSS_DFS = 41, | |
| /* 802.11g */ | |
| WLAN_EID_ERP_INFO = 42, | |
| WLAN_EID_EXT_SUPP_RATES = 50, | |
| /* 802.11n */ | |
| WLAN_EID_HT_CAPABILITY = 45, | |
| WLAN_EID_HT_INFORMATION = 61, | |
| /* 802.11i */ | |
| WLAN_EID_RSN = 48, | |
| WLAN_EID_TIMEOUT_INTERVAL = 56, | |
| WLAN_EID_MMIE = 76 /* 802.11w */, | |
| WLAN_EID_WPA = 221, | |
| WLAN_EID_GENERIC = 221, | |
| WLAN_EID_VENDOR_SPECIFIC = 221, | |
| WLAN_EID_QOS_PARAMETER = 222 | |
| }; | |
| /* Action category code */ | |
| enum ieee80211_category { | |
| WLAN_CATEGORY_SPECTRUM_MGMT = 0, | |
| WLAN_CATEGORY_QOS = 1, | |
| WLAN_CATEGORY_DLS = 2, | |
| WLAN_CATEGORY_BACK = 3, | |
| WLAN_CATEGORY_PUBLIC = 4, | |
| WLAN_CATEGORY_SA_QUERY = 8, | |
| WLAN_CATEGORY_WMM = 17, | |
| }; | |
| /* SPECTRUM_MGMT action code */ | |
| enum ieee80211_spectrum_mgmt_actioncode { | |
| WLAN_ACTION_SPCT_MSR_REQ = 0, | |
| WLAN_ACTION_SPCT_MSR_RPRT = 1, | |
| WLAN_ACTION_SPCT_TPC_REQ = 2, | |
| WLAN_ACTION_SPCT_TPC_RPRT = 3, | |
| WLAN_ACTION_SPCT_CHL_SWITCH = 4, | |
| }; | |
| /* | |
| * IEEE 802.11-2007 7.3.2.9 Country information element | |
| * | |
| * Minimum length is 8 octets, ie len must be evenly | |
| * divisible by 2 | |
| */ | |
| /* Although the spec says 8 I'm seeing 6 in practice */ | |
| #define IEEE80211_COUNTRY_IE_MIN_LEN 6 | |
| /* | |
| * For regulatory extension stuff see IEEE 802.11-2007 | |
| * Annex I (page 1141) and Annex J (page 1147). Also | |
| * review 7.3.2.9. | |
| * | |
| * When dot11RegulatoryClassesRequired is true and the | |
| * first_channel/reg_extension_id is >= 201 then the IE | |
| * compromises of the 'ext' struct represented below: | |
| * | |
| * - Regulatory extension ID - when generating IE this just needs | |
| * to be monotonically increasing for each triplet passed in | |
| * the IE | |
| * - Regulatory class - index into set of rules | |
| * - Coverage class - index into air propagation time (Table 7-27), | |
| * in microseconds, you can compute the air propagation time from | |
| * the index by multiplying by 3, so index 10 yields a propagation | |
| * of 10 us. Valid values are 0-31, values 32-255 are not defined | |
| * yet. A value of 0 inicates air propagation of <= 1 us. | |
| * | |
| * See also Table I.2 for Emission limit sets and table | |
| * I.3 for Behavior limit sets. Table J.1 indicates how to map | |
| * a reg_class to an emission limit set and behavior limit set. | |
| */ | |
| #define IEEE80211_COUNTRY_EXTENSION_ID 201 | |
| /* | |
| * Channels numbers in the IE must be monotonically increasing | |
| * if dot11RegulatoryClassesRequired is not true. | |
| * | |
| * If dot11RegulatoryClassesRequired is true consecutive | |
| * subband triplets following a regulatory triplet shall | |
| * have monotonically increasing first_channel number fields. | |
| * | |
| * Channel numbers shall not overlap. | |
| * | |
| * Note that max_power is signed. | |
| */ | |
| struct ieee80211_country_ie_triplet { | |
| union { | |
| struct { | |
| u8 first_channel; | |
| u8 num_channels; | |
| s8 max_power; | |
| } __attribute__ ((packed)) chans; | |
| struct { | |
| u8 reg_extension_id; | |
| u8 reg_class; | |
| u8 coverage_class; | |
| } __attribute__ ((packed)) ext; | |
| }; | |
| } __attribute__ ((packed)); | |
| enum ieee80211_timeout_interval_type { | |
| WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, | |
| WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */, | |
| WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, | |
| }; | |
| /* BACK action code */ | |
| enum ieee80211_back_actioncode { | |
| WLAN_ACTION_ADDBA_REQ = 0, | |
| WLAN_ACTION_ADDBA_RESP = 1, | |
| WLAN_ACTION_DELBA = 2, | |
| }; | |
| /* BACK (block-ack) parties */ | |
| enum ieee80211_back_parties { | |
| WLAN_BACK_RECIPIENT = 0, | |
| WLAN_BACK_INITIATOR = 1, | |
| WLAN_BACK_TIMER = 2, | |
| }; | |
| /* SA Query action */ | |
| enum ieee80211_sa_query_action { | |
| WLAN_ACTION_SA_QUERY_REQUEST = 0, | |
| WLAN_ACTION_SA_QUERY_RESPONSE = 1, | |
| }; | |
| /* A-MSDU 802.11n */ | |
| #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080 | |
| /* cipher suite selectors */ | |
| #define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00 | |
| #define WLAN_CIPHER_SUITE_WEP40 0x000FAC01 | |
| #define WLAN_CIPHER_SUITE_TKIP 0x000FAC02 | |
| /* reserved: 0x000FAC03 */ | |
| #define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 | |
| #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 | |
| #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 | |
| #define WLAN_MAX_KEY_LEN 32 | |
| /** | |
| * ieee80211_get_qos_ctl - get pointer to qos control bytes | |
| * @hdr: the frame | |
| * | |
| * The qos ctrl bytes come after the frame_control, duration, seq_num | |
| * and 3 or 4 addresses of length ETH_ALEN. | |
| * 3 addr: 2 + 2 + 2 + 3*6 = 24 | |
| * 4 addr: 2 + 2 + 2 + 4*6 = 30 | |
| */ | |
| static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_has_a4(hdr->frame_control)) | |
| return (u8 *)hdr + 30; | |
| else | |
| return (u8 *)hdr + 24; | |
| } | |
| /** | |
| * ieee80211_get_SA - get pointer to SA | |
| * @hdr: the frame | |
| * | |
| * Given an 802.11 frame, this function returns the offset | |
| * to the source address (SA). It does not verify that the | |
| * header is long enough to contain the address, and the | |
| * header must be long enough to contain the frame control | |
| * field. | |
| */ | |
| static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_has_a4(hdr->frame_control)) | |
| return hdr->addr4; | |
| if (ieee80211_has_fromds(hdr->frame_control)) | |
| return hdr->addr3; | |
| return hdr->addr2; | |
| } | |
| /** | |
| * ieee80211_get_DA - get pointer to DA | |
| * @hdr: the frame | |
| * | |
| * Given an 802.11 frame, this function returns the offset | |
| * to the destination address (DA). It does not verify that | |
| * the header is long enough to contain the address, and the | |
| * header must be long enough to contain the frame control | |
| * field. | |
| */ | |
| static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_has_tods(hdr->frame_control)) | |
| return hdr->addr3; | |
| else | |
| return hdr->addr1; | |
| } | |
| /** | |
| * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame | |
| * @hdr: the frame (buffer must include at least the first octet of payload) | |
| */ | |
| static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_is_disassoc(hdr->frame_control) || | |
| ieee80211_is_deauth(hdr->frame_control)) | |
| return true; | |
| if (ieee80211_is_action(hdr->frame_control)) { | |
| u8 *category; | |
| /* | |
| * Action frames, excluding Public Action frames, are Robust | |
| * Management Frames. However, if we are looking at a Protected | |
| * frame, skip the check since the data may be encrypted and | |
| * the frame has already been found to be a Robust Management | |
| * Frame (by the other end). | |
| */ | |
| if (ieee80211_has_protected(hdr->frame_control)) | |
| return true; | |
| category = ((u8 *) hdr) + 24; | |
| return *category != WLAN_CATEGORY_PUBLIC; | |
| } | |
| return false; | |
| } | |
| /** | |
| * ieee80211_fhss_chan_to_freq - get channel frequency | |
| * @channel: the FHSS channel | |
| * | |
| * Convert IEEE802.11 FHSS channel to frequency (MHz) | |
| * Ref IEEE 802.11-2007 section 14.6 | |
| */ | |
| static inline int ieee80211_fhss_chan_to_freq(int channel) | |
| { | |
| if ((channel > 1) && (channel < 96)) | |
| return channel + 2400; | |
| else | |
| return -1; | |
| } | |
| /** | |
| * ieee80211_freq_to_fhss_chan - get channel | |
| * @freq: the channels frequency | |
| * | |
| * Convert frequency (MHz) to IEEE802.11 FHSS channel | |
| * Ref IEEE 802.11-2007 section 14.6 | |
| */ | |
| static inline int ieee80211_freq_to_fhss_chan(int freq) | |
| { | |
| if ((freq > 2401) && (freq < 2496)) | |
| return freq - 2400; | |
| else | |
| return -1; | |
| } | |
| /** | |
| * ieee80211_dsss_chan_to_freq - get channel center frequency | |
| * @channel: the DSSS channel | |
| * | |
| * Convert IEEE802.11 DSSS channel to the center frequency (MHz). | |
| * Ref IEEE 802.11-2007 section 15.6 | |
| */ | |
| static inline int ieee80211_dsss_chan_to_freq(int channel) | |
| { | |
| if ((channel > 0) && (channel < 14)) | |
| return 2407 + (channel * 5); | |
| else if (channel == 14) | |
| return 2484; | |
| else | |
| return -1; | |
| } | |
| /** | |
| * ieee80211_freq_to_dsss_chan - get channel | |
| * @freq: the frequency | |
| * | |
| * Convert frequency (MHz) to IEEE802.11 DSSS channel | |
| * Ref IEEE 802.11-2007 section 15.6 | |
| * | |
| * This routine selects the channel with the closest center frequency. | |
| */ | |
| static inline int ieee80211_freq_to_dsss_chan(int freq) | |
| { | |
| if ((freq >= 2410) && (freq < 2475)) | |
| return (freq - 2405) / 5; | |
| else if ((freq >= 2482) && (freq < 2487)) | |
| return 14; | |
| else | |
| return -1; | |
| } | |
| /* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back | |
| * Ref IEEE 802.11-2007 section 18.4.6.2 | |
| * | |
| * The channels and frequencies are the same as those defined for DSSS | |
| */ | |
| #define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan) | |
| #define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq) | |
| /* Convert IEEE802.11 ERP channel to frequency (MHz) and back | |
| * Ref IEEE 802.11-2007 section 19.4.2 | |
| */ | |
| #define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan) | |
| #define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq) | |
| /** | |
| * ieee80211_ofdm_chan_to_freq - get channel center frequency | |
| * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz | |
| * @channel: the OFDM channel | |
| * | |
| * Convert IEEE802.11 OFDM channel to center frequency (MHz) | |
| * Ref IEEE 802.11-2007 section 17.3.8.3.2 | |
| */ | |
| static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel) | |
| { | |
| if ((channel > 0) && (channel <= 200) && | |
| (s_freq >= 4000)) | |
| return s_freq + (channel * 5); | |
| else | |
| return -1; | |
| } | |
| /** | |
| * ieee80211_freq_to_ofdm_channel - get channel | |
| * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz | |
| * @freq: the frequency | |
| * | |
| * Convert frequency (MHz) to IEEE802.11 OFDM channel | |
| * Ref IEEE 802.11-2007 section 17.3.8.3.2 | |
| * | |
| * This routine selects the channel with the closest center frequency. | |
| */ | |
| static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq) | |
| { | |
| if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) && | |
| (s_freq >= 4000)) | |
| return (freq + 2 - s_freq) / 5; | |
| else | |
| return -1; | |
| } | |
| #endif /* LINUX_IEEE80211_H */ |